FRH MODEL

DATA SHEET

The HELISEM® series offers 5 distinct models - VDA, VRP, VRH, VRG
and FRH - with the FRH mounted with a HXP impeller, to support a wide
range of open or closed tank applications up to 11m (36ft) diameter (1950
m³ - 515000 gallons) and viscosities up to 1000 mPas (cP) at 1.3
specific gravity.
The FRH model is a gearmotor driven mixer equipped with the HXP- HP2
impeller with 2 blades. This model was specifically designed for flocculation in
water treatment. The HP2 impeller is designed to generate good flow with the
least shear possible, making it ideal for flocculation.
The compact FRH model provides energy efficiency in a lightweight mixer with
uncompromising results.
General Characteristics:
• Agitator with gear drive motor
• Lower shaft provided with a hydrofoil Impeller
• Rated power fro m 0.18 to 2.2 kW (1/4 to 3 HP)

Applications: Mounting Options:

• Flocculation • Direct Mounting to Gearmotor
• Separation • Square baseplate
• Preparation of solution • Circular baseplate for ASME tank flange
• Keeping in suspension
• Dissolution Electrical Characteristics*:
• Heat Transfer • 50Hz 230V 1 Phase
• 60Hz 230V 1 Phase
• Homogenization
• 50Hz 400V 3 Phase
• Dilution • 60Hz 460V 3 Phase
*Other voltage
Materials: options
• Wetted Parts – Stainless steel 316L available
• Painting PU: RAL 1018 on the
drive system

Options:
Features & Benefits: • 1 or 2 impellers
• Easy to install and maintain, saving • Upward or Downward flow
valuable manpower and resources • Coated wetted parts
• Virtually no limitations from the (Abcite on solid shaft only)
process point of view
• All FRH mixers can rotate during
emptying, filling and can be equipped
with a frequency inverter
Single Impeller
Single Impeller
50Hz (Metric) 60Hz IEC (Metric) 60Hz IEC (Imperial)
Dim.
FRH 0655 0755 0905 1105 1305 1555 1855 2305 2805 3355 0656 0756 0906 1106 1306 1556 1856 2306 2806 3356 0656 0756 0906 1106 1306 1556 1856 2306 2806 3356
D mm (in) 650 750 900 1100 1300 1550 1850 2300 2800 3350 650 750 900 1100 1300 1550 1850 2300 2800 3350 25.6 29.5 35.4 43.3 51.2 61 72.8 90.6 110.2 131.9
N rpm 57 49 43 31 30 25 21 16 12 11 60 48 38 31 27 25 20 17 14 11 60 48 38 31 27 25 20 17 14 11
Pm kW (HP) 0.18 0.18 0.25 0.25 0.37 0.55 0.75 1.5 2.2 2.2 0.25 0.25 0.25 0.25 0.37 0.55 0.75 1.5 2.2 2.2 0.33 0.33 0.33 0.33 0.5 0.75 1 2 3 3
Weight kg (lbs) 19 21 40 50 72 126 161 285 480 686 20 21 40 50 72 132 161 285 466 686 44 46 88 110 159 291 355 628 1027 1512
Ht mm (in) 357 357 375 375 414 437 505 601 640 672 375 359 375 375 414 460 505 601 640 672 14.8 14.1 14.8 14.8 16.3 18.1 19.9 23.7 25.2 26.5
Hh mm (in) 101 116 140 171 202 240 287 357 434 519 101 116 140 171 202 240 287 357 434 519 4 4.6 5.5 6.7 8 9.4 11.3 14.1 17.1 20.4
Dp mm (in) 190 220 265 325 385 460 550 680 830 990 190 220 265 325 385 460 550 680 830 990 7.5 8.7 10.4 12.8 15.2 18.1 21.7 26.8 32.7 39
Flange F130 F130 F130 F130 F165 F215 F215 F265 F300 F300 F130 F130 F130 F130 F165 F215 F215 F265 F300 F300 F130 F130 F130 F130 F165 F215 F215 F265 F300 F300
Sq. Plate (option) P250 P250 P250 P250 P350 P350 P350 P400 P500 P500 P250 P250 P250 P250 P350 P350 P350 P400 P500 P500 P250 P250 P250 P250 P350 P350 P350 P400 P500 P500
Circ. Plate(option) 6” 6” 6” 6” 8” 10” 10” 12” 12” 12” 6” 6” 6” 6” 8” 10” 10” 12” 12” 12” 6” 6” 6” 6” 8” 10” 10” 12” 12” 12”
Max. La mm (in) 2000 2200 2350 2500 3000 3500 3800 5000 6000 6000 2000 2200 2350 2500 3000 3500 3800 5000 5500 6000 78.7 86.6 92.5 98.4 118.1 137.8 149.6 196.8 216.5 236.2
Min. La mm (in) 500 550 650 750 900 1050 1200 1500 1850 2150 550 550 650 750 900 1050 1200 1500 1850 2150 21.7 21.7 25.6 29.5 35.4 41.3 47.2 59.1 72.8 84.6

Solid Shaft: From FRH0655 to FRH0905 Hollow Shaft: From FRH1105 to FRH3355
From FRH0656 to FRH0906 From FRH1106 to FRH3356

Gearmotor IP55
Rated power Pm
Max, Torque Cm
Ht

Cylindrical coupling SS

Solid shaft SS 316L

Flange coupling
Phosphate
treated CS

Max.
La

Tubular shaft
SS 316L
Impeller with 2 blades
mounting on hub, in one part
SS 316L Impeller with 2 blades
Required diameter for mounting on hub, in 2 parts
introduction Dp SS 316L
Impeller height Hh Required diameter for
introduction Dp
Impeller height Hh

Hh

ØD
Single Impeller

50 Hz Single Impeller 60 Hz Single Impeller

Shaft length Shaft Shaft
TYPE Model
(mm) TYPE Model length length
FRH0655 FRH0655S200 2000 (mm) (in)
FRH0656 FRH0656S200 2000 78.7
FRH0655 FRH0655S50 500
FRH0656 FRH0656S55 550 21.7
FRH0755 FRH0755S220 2200
FRH0756 FRH0756S220 2200 86.6
FRH0755 FRH0755S55 550
FRH0756 FRH0756S55 550 21.7
FRH0905 FRH0905S235 2350
FRH0906 FRH0906S235 2350 92.5
FRH0905 FRH0905S65 650
FRH0906 FRH0906S65 650 25.6
FRH1105 FRH1105S250 2500
FRH1106 FRH1106S250 2500 98.4
FRH1105 FRH1105S75 750
FRH1106 FRH1106S75 750 29.5
FRH1305 FRH1305S300 3000
FRH1306 FRH1306S300 3000 118.1
FRH1305 FRH1305S90 900
FRH1306 FRH1306S90 900 35.4
FRH1555 FRH1555S350 3500
FRH1556 FRH1556S350 3500 137.8
FRH1555 FRH1555S105 1050
FRH1556 FRH1556S105 1050 41.3
FRH1855 FRH1855S380 3800
FRH1856 FRH1856S380 3800 149.6
FRH1855 FRH1855S120 1200 FRH1856 FRH1856S120 1200 47.2
FRH2305 FRH2305S500 5000 FRH2306 FRH2306S500 5000 196.8
FRH2305 FRH2305S150 1500 FRH2306 FRH2306S150 1500 59.1
FRH2805 FRH2805S600 6000 FRH2806 FRH2806S550 5500 216.5
FRH2805 FRH2805S185 1850 FRH2806 FRH2806S185 1850 72.8
FRH3355 FRH3355S600 6000 FRH3356 FRH3356S600 6000 236.2
FRH3355 FRH3355S215 2150 FRH3356 FRH3356S215 2150 84.6
Dual Impeller
Dual Impeller Dim. 50Hz (Metric) 60Hz IEC (Metric) 60Hz IEC (Imperial)
FR2H 0655 0755 0905 1105 1305 1555 1855 2305 2805 3355 0656 0756 0906 1106 1306 1556 1856 2306 2806 3356 0656 0756 0906 1106 1306 1556 1856 2306 2806 3356
D mm (in) 650 750 900 1100 1300 1550 1850 2300 2800 3350 650 750 900 1100 1300 1550 1850 2300 2800 3350 25.6 29.5 35.4 43.3 51.2 61 72.8 90.6 110.2 131.9
N rpm 50 44 36 30 25 22 18 14 11 9 48 45 36 27 25 19 17 14 12 9 48 45 36 27 25 19 17 14 12 9
kW
Pm 0.25 0.25 0.25 0.37 0.55 0.75 1.1 1.5 2.2 2.2 0.25 0.25 0.25 0.37 0.55 0.55 1.5 2.2 2.2 2.2 0.33 0.33 0.33 0.5 0.75 0.75 2 3 3 3
(HP)
Weight kg (lbs) 24 48 60 118 162 254 399 506 698 931 24 48 60 129 168 255 403 511 698 931 53 106 132 284 370 562 888 1127 1539 2053
Ht mm (in) 359 359 375 414 449 518 567 640 640 686 359 359 375 414 460 475 601 640 640 686 14.1 14.1 14.8 16.3 18.1 18.7 23.7 25.2 25.2 27
Hh mm (in) 101 116 140 171 202 240 287 357 434 519 101 116 140 171 202 240 287 357 434 519 4 4.6 5.5 6.7 8 9.4 11.3 14.1 17.1 20.4
Dp mm (in) 190 220 265 325 385 460 550 680 830 990 190 220 265 325 385 460 550 680 830 990 7.5 8.7 10.4 12.8 15.2 18.1 21.7 26.8 32.7 39
Flange F130 F130 F130 F165 F215 F265 F265 F300 F300 F300 F130 F130 F130 F165 F215 F265 F265 F300 F300 F300 F130 F130 F130 F165 F215 F265 F265 F300 F300 F300
Sq. Plate (option) P250 P250 P250 P250 P350 P400 P400 P500 P500 P500 P250 P250 P250 P250 P350 P400 P400 P500 P500 P500 P250 P250 P250 P250 P350 P400 P400 P500 P500 P500
Circ. Plate(option) 6” 6” 6” 8” 10” 12” 12” 12” 12” 12” 6” 6” 6” 8” 10” 12” 12” 12” 12” 12” 6” 6” 6” 8” 10” 12” 12” 12” 12” 12”
Max. La mm (in) 2500 3000 3000 4000 5200 6000 6000 6000 6000 6000 2500 3000 3000 4450 5200 6000 6000 6000 6000 6000 98.4 118.1 118.1 175.2 204.7 236.2 236.2 236.2 236.2 236.2
Min. La mm (in) 1150 1300 1550 1900 2250 2650 3150 3900 4650 5500 1150 1300 1550 1900 2250 2650 3150 3900 4650 5500 45.3 51.2 61 74.8 88.6 104.3 124 153.5 183.1 216.5
Hd mm (in) 650 750 900 1100 1300 1550 1850 2300 2800 3350 650 750 900 1100 1300 1550 1850 2300 2800 3350 25.6 29.5 35.4 43.3 51.2 61 72.8 90.6 110.2 131.9

Solid Shaft: From FR2H0655 to FR2H0905 Hollow Shaft: From FR2H1105 to FR2H3355

From FR2H0656 to FR2H0906

Gearmotor IP55
Rated power Pm
Max, Torque Cm
Ht

Cylindrical coupling SS

Solid shaft SS 316L

Flange coupling
Max. La Phosphate
treated CS

Tubular shaft
SS 316L

Impeller with 2 blades

mounting on hub, in one part Impeller with 2 blades
SS 316L
mounting on hub, in two parts
Required diameter for
Hd introduction Dp SS 316L
Impeller height Hh Required diameter for
introduction Dp
Impeller height Hh

Hh

ØD
Dual Impeller

50 Hz Dual Impeller 60 Hz Dual Impeller

Shaft Shaft Shaft

TYPE Model length TYPE Model length length
(mm) (mm) (in)
FR2H0655 FR2H0655S250 2500 FR2H0656 FR2H0656S250 2500 98.4

FR2H0655 FR2H0655S115 1150 FR2H0656 FR2H0656S115 1150 45.3

FR2H0755 FR2H0755S300 3000 FR2H0756 FR2H0756S300 3000 118.1

FR2H0755 FR2H0755S130 1300 FR2H0756 FR2H0756S130 1300 51.2

FR2H0905 FR2H0905S300 3000 FR2H0906 FR2H0906S300 3000 118.1

FR2H0905 FR2H0905S155 1550 FR2H0906 FR2H0906S155 1550 61

FR2H1105 FR2H1105S400 4000 FR2H1106 FR2H1106S445 4450 175.2

FR2H1105 FR2H1105S190 1900 FR2H1106 FR2H1106S190 1900 74.8

FR2H1305 FR2H1305S520 5200 FR2H1306 FR2H1306S520 5200 204.7

FR2H1305 FR2H1305S225 2250 FR2H1306 FR2H1306S225 2250 88.6

FR2H1555 FR2H1555S600 6000 FR2H1556 FR2H1556S600 6000 236.2

FR2H1555 FR2H1555S265 2650 FR2H1556 FR2H1556S265 2650 104.3

FR2H1855 FR2H1855S600 6000 FR2H1856 FR2H1856S600 6000 236.2

FR2H1855 FR2H1855S315 3150 FR2H1856 FR2H1856S315 3150 124

FR2H2305 FR2H2305S600 6000 FR2H2306 FR2H2306S600 6000 236.2

FR2H2305 FR2H2305S390 3900 FR2H2306 FR2H2306S390 3900 153.5

FR2H2805 FR2H2805S600 6000 FR2H2806 FR2H2806S600 6000 236.2

FR2H2805 FR2H2805S465 4650 FR2H2806 FR2H2806S465 4650 183.1

FR2H3355 FR2H3355S600 6000 FR2H3356 FR2H3356S600 6000 236.2

FR2H3355 FR2H3355S550 5500 FR2H3356 FR2H3356S550 5500 216.5

Mounting:
Gear Flange
b

p g t

Metric (mm) Imperial (in)

Type
F130 F165 F215 F265 F300 F400 F500 F130 F165 F215 F265 F300 F400 F500
b 9 11 13.5 13.5 17.5 17.5 17.5 0.35 0.43 0.53 0.53 0.69 0.69 0.69
t 160 200 250 300 350 450 550 6.3 7.87 9.84 11.81 13.78 17.72 21.65
p 130 165 215 265 300 400 500 5.12 6.5 8.46 10.43 11.81 15.75 19.69
g 110 130 180 230 250 350 450 4.33 5.12 7.09 9.06 9.84 13.78 17.72
e 10 12 15 16 20 22 25 0.39 0.47 0.59 0.63 0.71 0.87 0.98

Square Support Plate (optional)

pp tp

ep bp
Metric (mm) Imperial (in)
Type
P250 P350 P400 P500 P600 P700 P250 P350 P400 P500 P600 P700
bp 14 14 16 18 18 22 0.55 0.55 0.63 0.71 0.71 0.87
pp 190 280 320 420 500 600 7.48 11.02 12.6 16.54 19.69 23.62
tp 250 350 400 500 600 700 9.84 13.78 15.75 19.68 23.62 27.56
ep 15 15 15 20 20 25 0.59 0.59 0.59 0.79 0.79 0.98

ASME B16.5 150# FF Baseplate (optional)

Metric (mm) Imperial (in)
Type
6” 8” 10” 12” 18” 22” 6” 8” 10” 12” 18” 22”
Outside Diameter 279 343 406 483 635 749 11 13.5 16 19 25 29.5
Diameter of Circle of Holes 241 299 362 432 578 692 9.5 11.75 14.25 17 22.75 27.25
Bolt Hole Diameter 22 22 25 25 32 35 0.88 0.88 1 1 1.25 1.38
Number of Holes 8 8 12 12 16 20 8 8 12 12 16 20

Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is committed to helping make life better. We provide
innovative and mission-critical industrial, energy, medical and specialty vehicle products and services across 40+ respected brands designed
to excel in even the most complex and harsh conditions where downtime is especially costly. Our employees connect to customers for life by
delivering proven expertise, productivity and efficiency improvements. For more information, visit www.IRCO.com.

miltonroy.com
HELISEM is a registered tradename of Milton Roy miltonroymixing.com
© 2018 Milton Roy, All Rights Reserved Literature# MRMVRG 10/22