STAINLESS STEEL SOLID ROD
LNT Zeron 100X
CLASSIFICATION
AWS A5.9 ER2594 A-Nr 8
ISO 14343-A W 25 9 4 N L F-Nr 6
9606 FM 5
GENERAL DESCRIPTION
Solid rod for welding Zeron 100® and other super duplex stainless steel grades
High resistance to pitting and crevice corrosion in seawater
SHIELDING GASES (ACC. ISO 14175)
I1 Inert gas Ar (100%)
APPROVALS
TÜV
+
CHEMICAL COMPOSITION (W%) TYPICAL WIRE
C Mn Si Cr Ni Mo Cu W N
0.02 0.6 0.23 25 9.3 3.6 0.6 0.6 0.22
MECHANICAL PROPERTIES, TYPICAL, ALL WELD METAL
Shielding 0.2% proof strength Tensile strength Elongation Impact ISO-V(J)
gas Condition (N/mm2) (N/mm2) (%) -50°C
Typical values I1 AW 655 934 42 100
EXAMPLES OF MATERIALS TO BE WELDED
Steel grades EN 10088-1/-2 Mat. Nr UNS
Regular and super duplex stainless steels
X2CrNiMoN25-7-4 1.4410
X4CrNiMoN27-5-2 1.4460
X2CrNiMoN22-5-3 1.4462 2205 S31803
GX6 CrNiMo 24-8-2 1.4463
CD-4MCu S32550
Zeron 100 S32760
Super duplex stainless Steel grades: chemical composition approximately:
24-27% Cr, 6-9% Ni, 3-4% Mo, 0.10-0.25% N alloyed also with Cu and/or W
PACKAGING AND AVAILABLE SIZES
Diameter (mm) 1.6 2.0 2.4 3.2 Note : Cut length = 1000 mm
5 kg PE-Tube X X X X
LNT Zeron100X: rev. C-EN25-01/02/16
All information in this data sheet is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.eu for any udpated information.
Fumes: Material Safety Data Sheets (MSDS) are available on our website.
www.lincolnelectric.eu
