6.

Lubricants

Lubricants

Operating & Maintenance Manual 6-1

 6. Lubricants

Lubricants.........................................................................................................................................6-1
Lubrication schedule DA30 T2/T4/Stage 3B.....................................................................................6-3
Overview of oil and lubrication points DA30 T2/T4/Stage 3B...........................................................6-4
Oil specification sheet DA30 T2/T4/Stage 3B...................................................................................6-5
Filling capacities DA30 T2/T4/Stage 3B...........................................................................................6-6
Lubrication schedule DA40 T2/T4/Stage 3B ...................................................................................6-7
Overview of oil and lubrication points DA40 T2/T4/Stage 3B...........................................................6-8
Oil specification sheet DA40 T2/T4/Stage 3B...................................................................................6-9
Filling capacities DA40 T2/T4/Stage 3B...........................................................................................6-10
Transmission oil list...........................................................................................................................6-11

6-2 Operating & Maintenance Manual

 6. Lubricants

Lubrication schedule DA30 T2/T4/Stage 3B

Complete instructions in section 7. Maintenance.
1st
Service interval Min.
service Lubricants filled from
Pos. Component once a
producer
Hours --> 100 500 8 40 500 1000 2000 4000 year

ENGINE

1 Engine oil C R Shell Rimula R4 L 15W-40

2 Centrifugal cleaner C Cl

3 Engine oil filter R

4 Fuel filter ( 2 - only T4 ) R

5 Coolant/cooling system C C R C/R* 40% Glycoshell

6 Water separator D R

ENGINE RELATED

Air filter, outer element

10 -Inner element: replace every 2 years Cl/R* Cl/R*

11 Batteries (2) C C

12 Fuel tank C

13 Urea tank C Only for T4

14 Urea filling piont Only for T4

15 Urea filter R Only for T4

TRANSMISSION

20 Transmission oil R C R R Shell Rimula R3 Multi 10W-30

21 Filter (2) R R R

22 Strainer Cl Cl Cl

DRIVE LINE

30 Front differential oil R C R R Shell Spirax A 90 LS

31 Rear differential oil R C R R Aral HYP LS SAE 85W-90

32 Tandem housing oil (2) R C R R Aral EP plus SAE 85W-90

R Aral EP plus SAE 85W-90
33 Planetary hub (6) R R
+1.5% Lubrizol 6178

HYDRAULIC

40 Hydraulic oil C R Shell Tellus S2 V46

41 Breather element on tank R

42 Filter R R

LUBRICATION POINTS

50 Door and fender hatches (8 points) L

51 Cab hinges (4 points) L

52 Cardan shaft (2 points) L-2

Shell Gadus S3 A1300C
53 Cardan shaft (2 points) L-2

55 Cardan shaft (2 points) L-2

56 Cardan shaft (2+2 points) L-2

57 Park Brake L

58 Tilt support L

MISCELLANEOUS

70 Cab ventilation filter, external Cl/R* C/R*

80 Hydr. pump, tiltable cab C Shell Tellus S2 V15

100 Cab ventilation filter, internal R

110 Receiver - dryer filter R

120 Refrigerant AC system C/R* R - 134a

Not all items are shown in the illustration on the next page

R=Replace C=Check Cl=Clean L=Lubricate D=drain *=or when required

L-X=The number after the L means the number of pump strokes per lubricator

Operating & Maintenance Manual 6-3

6. Lubricants

Overview of oil and lubrication points DA30 T2/T4/Stage 3B

The numbers refer to table on previous page.

6-4 Operating & Maintenance Manual

 6. Lubricants

Oil specification sheet DA30 T2/T4/Stage 3B

This table presents guidelines for oil, coolant, fuel, lubricants and other fluids best suited for good performance
and long life.

Ambient temperature
Kind of
Component -4 14 32 50 68 86 °F Remarks
fluid
-20 -10 0 10 20 30 °C
The engine oil should at least meet the requirements for one
SAE 50
of the following oil classisications
- ACEA E5 and E7
SAE 5W-30 - API CG-4
- The Total Base Number (TBN) should be a minimum of
SAE 15W-40 12-13 (ASTM 2896)

Engine oil pan Engine oil

If fuel contains more than 0.3% (weight) sulphur: reduce the
oil change interval.
Make sure the oil sustain all temperature variations up until
next oil change.
Ask your local Doosan Moxy Dealer oil supplier

Acc. to: ASTM and ISO standards

Winter Centane number: min. 49.
Fuel Tank Diesel fuel Sulphur contents: max. 0.3% (weight).
Summer - Diesel Max 2% isopropanol additive

Cooling Water + 30-50% Nitrate-free glycol antifreeze is recommended.

system antifreeze See 2000 hours service.
ATF When changing between ATF and engine oil, it is
Dexron - IID/-III Mercon - M
recommended to run the transmission clutch calibration
(AEB-tester)
SAE 10W
ZF Only oils in the transmission oil list can be used !
Engine Oil SAE 15W-40
transmission
NOTE: Min. 20 minutes warming up period in neutral
SAE 20W-20 position is required when ambient temperature is within this
area:

Rear diff HYP LS SAE 85W-90

Tandem housing According to:

Gear oil SAE 85W-90 API GL-5

Hubs (6) SAE 85W-90

90/85 + Lubrizol max. 1,5 %

Front diff. Gear oil with *=max. 2% (weight) VI-Improver and pour point depressant
SAE 90
LS-additives in the basic gear oil.
Other gear oils as above*

ISO VG 32 Only mineral based oils

Viscosity approx.20 cSt at normal operating temp.
ISO VG 46 Range: 10-250 cSt, max. 850 cSt at cold start.
Hydraulic oil
Hydraulic oil: HM or HV oils (ISO 6743/4, CETOP RP 91H)
or H-LP oils (Din 51524).
Hydraulic tank • Contact oil supplier when operating in temperature
below -25º
ATF DEXRON IID • Warm up in neutral after starting at temperature near lower
limitation of the oil.
• If using Biological oil contact your Doosan Moxy Dealer
before use.
Engine oil SAE 10W The oil must be approved by Doosan Moxy.

Lithiumsaponfield with EP-additive

Lubricator
Consistency NLGI-1/1.5/2

Automatic Universal
NOTE: See specification on the next page.
Central lubr. grease
system

Hydraulic ISO VG 15 NOTE : If the cab should be tilted by use of the hydraulic pump
pump Hydraulic oil a temperatures below -20°C, use oil fluid 4 Aero Shell or similar
tiltable cab
See remarks

CAUTION

Remember, Automatic Transmission Fluid must not be mixed with engine or hydraulic oil.

Operating & Maintenance Manual 6-5

 6. Lubricants

Description ASTM test Method Min/Max Specification Remarks

NLGI Grade Std 2 -10 to +40 Degree Celsius
Thickener type Min Lithium Complex
Solid Additives, Moly Max 3% No Graphite
Oxidation Stability @ 100hrs D942 Max 0,3 bar
Water washout @ 79°C Max 4%
Dropping piont D1264 Min 230°C
Rust protection D1743 Pass
Copper corrosion D4048 Max 1b
Base oil viscosity D445 Min 600 cSt @ 40°C
Four ball (EP) weld point D2596 Min 400 kg
Four ball wear D2266 Max 0,6mm 1hr @ 75°C/1200rpm/40kg

The grease quality is important due to potential damage and wear in bearings, any failure in the tandem and
articulation bearing will create a high repair cost.
Use of Grease with wrong specification will affect warranty claims.
Make sure that you meet the specifications, and have extra focus at:
1. Four ball (EP) weld point.
2. Four ball wear.

Filling capacities DA30 T2/T4/Stage 3B

All capacities are measured in litres (dm3), and are approximate values. To achieve correct level: check at dip
stick, level eye, level plug etc.

Description:
Specified capacity: Total tank/reservoir volume or total capacity from empty.
Refil amount: Refill volume after normal fluid draining. The differences are fluid left in components,
piping etc.

Component/Fluid Specified capacity Refill amount (litres)

(litres)
DA30 T2/T4/Stage 3B DA30 T2/T4/Stage 3B
Engine oil 33 33
Engine coolant 45 38
Fuel Tank 335 As required
Transmission oil* 75 52
Rear differential 16 16
Front differential 13,2 13.2
Tandem housing (each) 2 x 48 2 x 48
Front reduction gear (each) 2 x 11 2 x 11
Rear reduction gear (each) 4x7 4x7
Hydraulic system 205 123
Windscreen washer tank 4.5 4.5
®
Adblue tank 38 38

* = Check level when engine runs at low idle.

Do not run engine without oil in the transmission.

6-6 Operating & Maintenance Manual

 6. Lubricants

Lubrication schedule DA40 T2/T4/Stage 3B

Complete instructions in section 7. Maintenance.
1st
Service interval Min.
service Lubricants filled from pro-
Pos. Component once a
ducer
Hours --> 100 500 8 40 500 1000 2000 4000 year

ENGINE

1 Engine oil C R Shell Rimula R4 L 15W-40

2 Centrifugal cleaner C Cl
3 Engine oil filter R
4 Fuel filter ( 2 - only T4 ) R
5 Coolant/cooling system C C R C/R* 40% Glycoshell
6 Water separator D R
ENGINE RELATED

Air filter, outer element

10 -Inner element: replace every 2 years Cl/R* Cl/R*

11 Batteries (2) C C
12 Fuel tank C
13 Urea tank C Only for T4
14 Urea filling point Only for T4
15 Urea filter R Only for T4
TRANSMISSION

20 Transmission oil R C R R Shell Rimula R3 Multi 10W-30

21 Filter (2) R R R
22 Strainer Cl Cl Cl
DRIVE LINE

30 Front differential oil R C R R Shell Spirax S2 ALS 90

31 Rear differential oil R C R R
32 Tandem housing oil (2) R C R
33 Front reduction gear oil (2) R C R R
Shell Spirax S4 TXM 10W-30
34 Separate brake cooling tank, front R R
35 Separate brake cooling filter, front R R

HYDRAULIC

40 Hydraulic oil C R Shell Tellus S2 V46

41 Breather element on tank R
42 Filter R R

LUBRICATION POINTS

50 Door and fender hatches (8 points) L

51 Cab hinges (4 points) L
52 Cardan shaft (2 points) L-2
Shell Gadus S3 A1300C
53 Cardan shaft (2 points) L-2
55 Cardan shaft (2 points) L-2
56 Cardan shaft (2+2 points) L-2
57 Park Brake (1 point) L
58 Tilt support (1 point) L
MISCELLANEOUS

70 Cab ventilation filter Cl/R* C/R*

80 Hydr. pump, tiltable cab C Shell Tellus S2 V15
90 Suspension cylinder C Shell Tellus S2 V68
100 Cab ventilation filter, internal R
110 Receiver - dryer filter R
120 Refrigerant AC system C/R* R - 134a

Not all items are shown in the illustration on the next page

R=Replace C=Check Cl=Clean L=Lubricate D=drain *=or when required

L-X=The number after the L means the number of pump strokes per lubricator
Operating & Maintenance Manual 6-7
6. Lubricants

Overview of oil and lubrication points DA40 T2/T4/Stage 3B

The numbers refer to table on previous page.

12

6-8 Operating & Maintenance Manual

 6. Lubricants

Oil specification sheet DA40 T2/T4/Stage 3B

This table presents guidelines for oil, coolant, fuel, lubricants and other fluids best suited for good performance
and long life.

Ambient temperature
Kind of
Component -4 14 32 50 68 86 °F Remarks
fluid
-20 -10 0 10 20 30 °C
The engine oil should at least meet the requirements for one
SAE 50
of the following oil classifications:
- ACEA E5 and E7
SAE 5W-30 - API CG-4
- The Total Base Number (TBN) should be a
SAE 15W-40 minimum of 12-13 (ASTM 2896)

Engine oil pan Engine oil If fuel contains more than 0.3% (weight) sulphur: reduce the
oil change interval.
Make sure the oil can sustain all temperature variations up
until next oil change.
Ask your local Doosan Moxy Dealer or oil supplier

Acc. to: ASTM and ISO standards

Winter Cetane number: min.49.
Fuel Tank Diesel fuel Sulphur contents: max. 0.3%(weight)
Summer-Diesel Max 2% isopropanol additive

Cooling Water + 30-50% Nitrate-free glycol antifreeze is recommended. See

system antifreeze 2000 hours service.
ATF When changing between ATF and engine oil, it is
Dexron - IID/-III Mercon -M
recommended to run the transmission clutch calibration
(AEB-tester)
SAE 10W
Only oils in the transmission oil list can be used!
ZF
Engine Oil SAE 15W-40
transmission NOTE: Min. 20 minutes warming up period in neutral posi-
SAE 20W-20 tion is required when ambient temperature is within this
area:

Tandem hous- According to:

ing, planetary Gear oil SAE 10W-30 API GL-4 or MIL-L-2104D
reduction gear (gear oil with EP-additives)

Front diff. Gear oil *=max. 2% (weight) VI-Improver and pour point depressant
with
SAE 90
in the basic gear oil.
LS-additives
Rear diff. Other gear oils as above*

Hydraulic oil ISO VG 32 Only mineral based oils

Viscosity approx. 20 cSt at normal operating temp.
ISO VG 46 Range: 10-250 cSt, max. 850 cSt at cold start.
Hydraulic oil: HM or HV oils (ISO 6743/4, CETOP RP 91H)
or H-LP oils (DIN 51524).
• Contact oil supplier when operating in temperature
Hydraulic tank
below -25°C
ATF DEXRON IID • Warm up in neutral after starting at temperature
near lower limitation of the oil .
• If using Biological oil contact your Doosan Moxy Dealer
before use. The oil must be approved by Doosan Moxy.
Engine oil
SAE 10W

Lithiumsaponfield with EP-additive

Lubricator
Consistency NLGI-1/1.5/2.

Automatic Universal NOTE: See specification on the next page

Central lubr. grease
system

Hydraulic ISO VG 15 NOTE: If the cab should be tilted by use of the hydraulic
pump, Hydraulic oil pump at temperatures below -20°C, use oil fluid 4 Aero
tiltable cab See remarks Shell or similar

CAUTION

Remember, Automatic Transmission Fluid must not be mixed with engine or hydraulic oil.

Operating & Maintenance Manual 6-9

 6. Lubricants

Description ASTM test Method Min/Max Specification Remarks

NLGI Grade Std 2 -10 to +40 Degree Celsius
Thickener type Min Lithium Complex
Solid Additives, Moly Max 3% No Graphite
Oxidation Stability @ 100hrs D942 Max 0,3 bar
Water washout @ 79°C Max 4%
Dropping piont D1264 Min 230°C
Rust protection D1743 Pass
Copper corrosion D4048 Max 1b
Base oil viscosity D445 Min 600 cSt @ 40°C
Four ball (EP) weld point D2596 Min 400 kg
Four ball wear D2266 Max 0,6mm 1hr @ 75°C/1200rpm/40kg

The grease quality is important due to potential damage and wear in bearings, any failure in the tandem and
articulation bearing will create a high repair cost.
Use of Grease with wrong specification will affect warranty claims.
Make sure that you meet the specifications, and have extra focus at:
1. Four ball (EP) weld point.
2. Four ball wear.

Filling capacities DA40 T2/T4/Stage 3B

All capacities are measured in litres (dm3), and are approximate values. To achieve correct level: check at dip
stick, level eye, level plug etc.

Description:
Specified capacity: Total tank/reservoir volume or total capacity from empty.
Refil amount: Refill volume after normal fluid draining. The differences are fluid left in components,
piping etc.

Component/Fluid Specified capacity Refill amount (litres)

(litres)
DA40 T2/T4/Stage 3B DA40 T2/T4/Stage 3B
Engine oil 44 44
Engine coolant 50 42
Fuel Tank 530 As required
Transmission oil* 75 52
Rear differential 46 43
Front differential 13,2 13.2
Tandem housing (each) 2 x 140 2 x 125
Front reduction gear (each) 2 x 7.5 2 x 7.5
Hydraulic system 275 209
Windscreen washer tank 4.5 4.5
®
Adblue tank 38 38

* = Check level when engine runs at low idle.

Do not run engine without oil in the transmission.

6-10 Operating & Maintenance Manual

 6. Lubricants

Transmission oil list

This list comes from the ZF website and is updated every 3 months. Please check the date of publication
of the ZF transmission oil list , if necessary go to the ZF website www.ZF.com to download the lastest ver-
sion of the ZF transmission oil list.
Lubricant class 03A
Mineral oil-based engine oil
(API CD/CE/CF-4/CF/CG-4/CH-4/CI-4/SF/SG/SH/SJ/SL or ACEA, categories A, B, E)
Viscosity class: SAE 20W-20 / 30 / 10W-30 / 10W-40 / 15W-30 / 15W-40 / 20W-40
Note: All mineral oil-based trade products which satisfy the above specifications may be used.

Lubricant class 03B

Engine oil
(API CD/CE/CF-4/CF/CG-4/CH-4/CI-4/SF/SG/SH/SJ/SL or ACEA, categories A, B, E)
Viscosity class: SAE 10W / 5W-30 / 5W-40

Manufacturer Trade name

FUCHS PETROLUB AG, MANNHEIM/D FUCHS TITAN UNIVERSAL HD SAE 10W

GINOUVES GEORGES SA, LA FARLEDE/F YORK 730 SAE 10W

GS CALTEX CORPORATION, SEOUL/ROK DOOSAN DX 10W

IPIRANGA PRODUTOS DE PETRÓLEO S, RIO DE JANEIRO/BR ULTRAMO TURBO 10W

KUWAIT PETROLEUM R&T B.V., EUROPOORT RT/NL Q8 T 400 SAE 10W

KUWAIT PETROLEUM R&T B.V., EUROPOORT RT/NL Q8 T 520 SAE 10W

LLK FINLAND OY, HAMINA/FIN TEBOIL POWER D SAE 10W

LUBRICATION ENGINEERS, INC., FORT WORTH, TEXAS/USA MONOLEC GFS ENGINE OIL SAE 10

MORRIS LUBRICANTS, SHREWSBURY/GB RING FREE XHD 10W

PAKELO MOTOR OIL S.R.L, SAN BONIFACIO (VR)/I PAKELO PKO HD 4 SAE 10W

PANOLIN AG, MADETSWIL/CH PANOLIN EXTRA DIESEL 10W

PETRONAS LUBRICANTS INTERN., KUALA LUMPUR/MAL AKCELA ENGINE OIL 10 (SAE 10W)

PETRONAS LUBRICANTS INTERN., KUALA LUMPUR/MAL AKCELA SUPER 10 (SAE 10W)

PETRONAS LUBRICANTS INTERN., KUALA LUMPUR/MAL AMBRA SUPER 10 (SAE 10W)

PETRONAS LUBRICANTS INTERN., KUALA LUMPUR/MAL URANIA C SAE 10 W

SRS SCHMIERSTOFF VERTRIEB GMBH, SALZBERGEN/D SRS REKORD 10W

TOTAL LUBRIFIANTS S.A., PARIS/F GULF PUBLIC WORKS 10W

TOTAL LUBRIFIANTS S.A., PARIS/F TOTAL RUBIA S 10W

Operating & Maintenance Manual 6-11

 6. Lubricants

Transmission oil list

Lubricant class 03C

Off highway lubricants
Viscosity grades: SAE 5W-30 / 5W-40 / 10W / 10W-30 / 10W-40 / 15W-30 / 15W-40 / 20W-20 / 20W-40 / 30

Manufacturer Trade name

ADDINOL LUBE OIL GMBH, LEUNA/D ADDINOL FLUID TO-4 SAE 30

ARAL AG, BOCHUM/D ARAL FLUID TO-4 SAE 10W
ARAL AG, BOCHUM/D ARAL FLUID TO-4 SAE 30
BAYWA AG, MÜNCHEN/D BAYWA MOTORENÖL HDC SAE 30
BAYWA AG, MÜNCHEN/D TECTROL UTTO - TO
BP INTERNATIONAL, PANGBOURNE, READING/GB BP AUTRAN 410 SAE 10W
BP INTERNATIONAL, PANGBOURNE, READING/GB BP AUTRAN 430 SAE 30
BUCHER AG LANGENTHAL, LANGENTHAL/CH GEAR OIL MEGA TO-4 SAE 10W
BUCHER AG LANGENTHAL, LANGENTHAL/CH GEAR OIL MEGA TO-4 SAE 30
CASTROL INTERNATIONAL, PANGBOURNE READING/GB CASTROL TFC 410 SAE 10W
CASTROL INTERNATIONAL, PANGBOURNE READING/GB CASTROL TFC 430
CASTROL INTERNATIONAL, PANGBOURNE READING/GB CASTROL TRANSMAX OFFROAD 10 SAE 10W
CASTROL INTERNATIONAL, PANGBOURNE READING/GB CASTROL TRANSMAX OFFROAD 30 SAE 30
CATERPILLAR INC., PEORIA/USA CAT TDTO SAE 10W
CATERPILLAR INC., PEORIA/USA CAT TDTO SAE 30
CHEVRONTEXACO GLOBAL LUBRICANTS, SAN RAMON/USA CHEVRON DRIVE TRAIN FLUID HD SAE 10W
CHEVRONTEXACO GLOBAL LUBRICANTS, SAN RAMON/USA CHEVRON DRIVE TRAIN FLUID HD SAE 30
CHEVRONTEXACO GLOBAL LUBRICANTS, SAN RAMON/USA TEXACO TRANSMISSION & DRIVE TRAIN TO-4 OIL SAE 30
CHEVRONTEXACO GLOBAL LUBRICANTS, SAN RAMON/USA TEXACO TRANSMISSION AND DRIVE TRAIN OIL SAE 10W
CHEVRONTEXACO, GHENT/B CALTEX TORQUE FLUID 414
CHEVRONTEXACO, GHENT/B CALTEX TORQUE FLUID 434
CHEVRONTEXACO, GHENT/B CALTEX TORQUE FLUID 434A
CHEVRONTEXACO, GHENT/B TEXTRAN HD 10W
CHEVRONTEXACO, GHENT/B TEXTRAN HD 30
ENI S.P.A. REFINING & MARKETING DIVISION, ROME/I ROTRA CT 30
EXXON MOBIL CORPORATION, FAIRFAX, VIRGINIA/USA ESSOTRANS/EXXTRANS 10W
EXXON MOBIL CORPORATION, FAIRFAX, VIRGINIA/USA ESSOTRANS/EXXTRANS 30
EXXON MOBIL CORPORATION, FAIRFAX, VIRGINIA/USA MOBILTRANS HD 10W
EXXON MOBIL CORPORATION, FAIRFAX, VIRGINIA/USA MOBILTRANS HD 30
FABRIKA MAZIVA FAM A.D, KRUEVAC/SRB TANSHIDO TO-4 SAE 30
FABRIKA MAZIVA FAM A.D, KRUEVAC/SRB TRANSHIDO TO-4 SAE 10W
FUCHS PETROLUB AG, MANNHEIM/D TITAN UTTO TO-4 SAE 30
GINOUVES GEORGES SA, LA FARLEDE/F YORK 792 SAE 30
KUWAIT PETROLEUM R&T B.V., EUROPOORT RT/NL EL-4117
KUWAIT PETROLEUM R&T B.V., EUROPOORT RT/NL Q8 TO-4 FLUID SAE 10W
KUWAIT PETROLEUM R&T B.V., EUROPOORT RT/NL Q8 TO-4 FLUID SAE 30
LLK FINLAND OY, HAMINA/FIN TEBOIL FLUID TO-4 SAE 10W
LLK FINLAND OY, HAMINA/FIN TEBOIL FLUID TO-4 SAE 30
LUBRICANT OIL COMPANY, SINOPEC, BEIJING/CN SINOPEC GREAT WALL TRANS FLUID 30
MAGNA INDUSTRIAL CO. LIMITED, HONG KONG/HK OMEGA 696 SAE 10W
MAGNA INDUSTRIAL CO. LIMITED, HONG KONG/HK OMEGA 696 SAE 30
MAZIVA ZAGREB D.O.O, ZAGREB/HR INA TRANSMATIK 10W
MAZIVA ZAGREB D.O.O, ZAGREB/HR INA TRANSMATIK 30

6-12 Operating & Maintenance Manual

 6. Lubricants

Manufacturer Trade name

MORRIS LUBRICANTS, SHREWSBURY/GB LIQUIMATIC CT 10W

MORRIS LUBRICANTS, SHREWSBURY/GB LIQUIMATIC CT 30
OMV REFINING & MARKETING GMBH, WIEN/A OMV CONSTRUCT TO-4 SAE 10W
OMV REFINING & MARKETING GMBH, WIEN/A OMV CONSTRUCT TO-4 SAE 30
PETRONAS LUBRICANTS BELGIUM NV, AARTSELAAR/B CATRALUBE 30
PRISTA OIL EAD, ROUSSE/BG PRISTA TO-4 10W
PRISTA OIL EAD, ROUSSE/BG PRISTA TO-4 30
RAVENSBERGER SCHMIERSTOFFVERTRIEB GMBH, WERTHER/D RAVENOL CATOEL TO-4 SAE 10W
RAVENSBERGER SCHMIERSTOFFVERTRIEB GMBH, WERTHER/D RAVENOL CATOEL TO-4 SAE 30
REPSOL YPF LUBRICANTES Y ESPECIALIDADES, MADRID/E TRANSMISIONES TO-4 SAE 10W

REPSOL YPF LUBRICANTES Y ESPECIALIDADES, MADRID/E TRANSMISIONES TO-4 SAE 30

SHELL INTERNATIONAL PETROLEUM COMP LTD, LONDON/GB SHELL DONAX TC 10W
SHELL INTERNATIONAL PETROLEUM COMP LTD, LONDON/GB SHELL DONAX TC 30
SHELL INTERNATIONAL PETROLEUM COMP LTD, LONDON/GB SHELL DONAX TCS
SHELL INTERNATIONAL PETROLEUM COMP LTD, LONDON/GB SHELL SPIRAX S4 CX 10W
SHELL INTERNATIONAL PETROLEUM COMP LTD, LONDON/GB SHELL SPIRAX S4 CX 30
SHELL INTERNATIONAL PETROLEUM COMP LTD, LONDON/GB SHELL SPIRAX S6 CXME 10W-40
SRS SCHMIERSTOFF VERTRIEB GMBH, SALZBERGEN/D SRS GETRIEBEFLUID ZFC
SRS SCHMIERSTOFF VERTRIEB GMBH, SALZBERGEN/D SRS WIOLIN 410
SRS SCHMIERSTOFF VERTRIEB GMBH, SALZBERGEN/D SRS WIOLIN 430

Extreme low temperature grease for automatic central lubrication system:

SHELL Retinax CS 00 ( -40°C )

Operating & Maintenance Manual 6-13