Printed Page: 1of2

Subject Code: BAS102

PAPER ID-311236 Roll No:231O 42E5Oo74
BTECH
(SEM I) THEORY EXAMINATION 2023-24
ENGINEERING CHEMISTRY
TIME: 3HRS M.MARKS: 7O

Note: 1. Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
1. Attempt all questions in brief.
Q no. Question Marks
a Explain molecular self-assembly method for preparing the nanomaterials. 2
b.
A solution shows a transmittance of 20%, when kept in a cell of 2.5 cm thickness.
Calculate its concentration if the molar absorptivity coefficient is 12000dm'mol'cm!.
Analyze the effect of polar solvent on
7 *transition inacetone.
Calculate
also.
the emfof the cell , if the standard emfofthe cell is I.54 V. Write cell reaction2

zds\zn (0.2M]4g (0.002M]4sls) ar 25tc

e What is role of Gypsum in cement manufacturing? 2
Asample of coal contains 60% Carbon, 33% Oxygen, 6.0% Hydrogen, 0.5% Sulphur,2
0.2% Nitrogen and 0.3% Ash. Calculate its GCv.
What do you understand by Polymer Blends? 2
SECTION B
2. Attempt any three of the following:
Draw molecular orbital diagram of ; And NO. Caleulate their bond orderand comment 7
on their magnetic behaviors.
b.
Illustrate the shielding and Deshielding effect involved in NMR spectroscopy. 7
In the P-NMR spectrum reorded at 293 K. an Organic compound (CsH;NO)
exhibited signals at 8 7.8 (1A, singlet), 8 2.8 (3H, singlet) and 8 2.6 (3H,singlet), Find
the structure ofcompound.
Illustrate the various steps involved during manufacturing of Portland cement with the
help of a labelled diagram Give the chemical reactions involved during setting and
hardening of cement.
Compare merits and demerits of Zeolite and lon Exchange method.
e Discuss the preparation of Grignard Reagent. Predict the final product obtained when 7
CaHsMgBr reacts with
(i) HCHO ii) CH,CHO iibCHSACO (iv) CO;
SECTION C
3. Attempt any one part of the following:
a Illustrate any five principles ofGreen Chemistry and the give green synthesis method for
preparation of Paracetamol.
b. Classify Liquid crystals on thè basis of temperature and give their applications in various 7
fields.
4. Attempt any one part of the following:
a. Asymmetrically substituted compounds having even number ofcumulative double bonds
exhibit optical isomerism whereas compounds having odd number ofcumulative double
bonds exhibit geometrical isomeris1m. Explain giving proper reasons.
Write short notes on (any TWO)
()UV Shift( )Applications of IR spectroscopy.()Molecular vibration
5. Attempt any one part of the following:
1|
 Printed Page: 2 of 2
Subject Code: BAS102
PAPER ID-311236 Roll No:

BTECH
(SEM I) THEORY EXAMINATION 2023-24
ENGINEERING CHEMISTRY
M.MARKS: 70
TIME: 3HRS

Illustrate the working, diagrammatic representation and cell reaction of Lead Acid 7
storage battery during charging and discharging.
Briefly explain wet corrosion. How corrosion can be prevented by Metallic coating and 7
b.
using corrosion inhibitors?
6. Attempt any cne part of the following:
With the help of a neat diagran, explain the working of Bomb calorimeter. A
sample of coal contain C=899%, H=8% and ash-3%.
The following data were obtained when the above coal was tested in bomb
calorimeter: Weight of coal burnt= 0.85 g; Weight of water taken- 850 g: Water
equivalent of bomb and calorimeter= 3500 g: Rise in temperature 2.5C; Fuse
wire correction = 10.0 cal ; Acid correction= 50.0 cal; Cooling correction= 0.03 C.
Assuming that the latent heat of condensation of steam as 580 cal/gm,
Calculate gross and net calorific values of the coal.
b. llustrate the principle of lime soda process.
Analysis of raw water gives the following data: Cas20 ppm, Mg= 25 ppm, CO2
30 ppm, HCOJ = 150 ppm, K= 10 ppm. Analysí of treated water: CO,?=45ppm, OH 8 3
= 68 ppm. Calculate the Lime (87% pure) and ^oda (91% pure) required to soften 10
litre of sample water.
7. Attempt any one part of the following: W
a. Classify conducting polymers and,tmention their itnportant applications
b. Write the preparation (structure otmonomerand polymer), properties &applicaions of7
the any THREE polymers:
() Buna-S (ii) Nylon 6,6-(ii)
113 Polyester
-03- (iv)
20 Kevlar
0 8
2: 4
() Bakelite
51:16

2|a2C
 Printed Page: 1of 2
Subject Code: BMEI01

PAPER ID-311621 Roll No:23o49 2)55oo9

BTECH
2023-24
(SEM ) THEORY EXAMINATION
ENGINEERING
FUNDAMENTALS OF MECHANICAL M.MARKS: 70
TIME: 3HRS

then choose suitably.

ote: 1. Attemptall Sections. If require any missing data;
SECTION A
2 x 7= 14
1 Attempt all questions in brief.
a Write the characteristics of force.
b. What do you mean by shear strain?
e. Describe weakness of hybrid vehicles.
d. What do you understand by total cylinder volume?
throughout a liquid column due to a force
A pressure of 2000 Pa is transmitted
an area of 0.1 m, what force is
e

being applied on a piston. If the piston has

applied?
head turbine.
Give example for a low head, medium head and high
quantity to be measured.
Give the names of types of transducers based on
SECTION B
33
7x3= 21
2. Attempt any three of the following:
3 m and diametet
a. A metallic wire (Y =20 x 1010N/m. and o =0.26) of length
decrease in diameter of
0.1 cm is stretched by a load of 10 kg. Calculate the
the wire.
Explain the working of twa stroke petrol engine with diagram.
1103

Explain the following;

(i) DPT
(ii) Comfort Conditions
(iii) Specific Humidity
Wheè! turbine. Differentiate
Draw velocity triangle diagranm for Pelton
between the turbines and pumps.
Descrilbe the construction and operation ofa Prony brake dynamometer. And
Derive the formula for break power of engine.
SECTION C
7x1=7
3. Attempt any one part of the following: smooth surface
a A beam 8 m. long is hinged at A£nd supported on roller over a shown in
inclined at an angle 30 to»thè horizontal at B. The beam is loaded as
fig. Determine the support reactions.

30
b What is the slhape of cross-section obtained after yielding in cases of brittle
material? Explain in bricf.

1|Pa ge
 Printed Page: 2 of 2
Subject Code: BME101

PAPER ID-311621 2 55oo79

Roll No:23oa
BTECH
2023-24
(SEM I) THEORY EXAMINATION
ENGINEERING
FUNDAMENTALS OF MECHANICAL M.MARKS: 70
TIME: 3HRS
7x1=7
4. Attempt any one part of the following: required in an HEV? Do you
Why an energy management control system is similar to that applied to a
think an elaborate energy management system
hybrid vehicle, is required in an electric vehicle? Explain.
suitable for hybrid electric
b Give the types of energy storage technologies detail.
vehicle. Explain the lithium-ion batteries in
7x1=7
5. Attempt any one part of the folloving:
a With a neat sketch, explain the working principle of vapour compression
Refrigeration system. Also draw T-s and P-h diagram
C.
b. A cold storage is to maintained at -5° C while the surroundings are at 35°
The heat leakage from the surroundings into the cold storage is estimated to be
29, kW. The actual C.O.P. of the refrigeration plants is one-third of an ideal
plant working between some temperatures. Find the power required to drive
the plant. 83

7x1=7
6. Attempt any one part of the following:
a. Water flows through a pipe of inter'al diameter 20cm at the speed of lm/s,
What shouldthe diameter of thengzzle be if the water is to emerge at the speed
of 4m/s? By continuity equation,
b How doss tompasatge affóctihe viscosiy ofafsid2 Asquareplate0m side
moves parallelto seconl plate with a velocity of 0.1 ms-1, both,plats being
immersed in waterf ife viscous force is 0.002 N and the coèfficient of
viscosity 0.001 poise what is the distance betweenthe plates?
7. Attempt any one part of the following: 7x1=7
a. Explain with neat sketch optical pyrometer. Explainwhy an optical pyrometer
for measuring high temperatures calibrated for an ideal blackbody radiation
gives too low a value for the temnperature ofa rèd-hot iron piece in the open
but gives a correct value for the tempertùre when the same piece in the
furnace.
b What are the examples
131 of2mechatronie
0/202 system? How does the evolution of
mechatronics talke place?

21Page
 Printed Page: 1 of 2
Subject Code: BEC101
PAPER ID-311338
Rol No:23o4q 2 1 5 5 o 4
BTECH
(SEM ) THEORY EXAMINATION 2023-24
FUNDAMENTALS OF ELECTRONICSENGINEERING
M.MARKS: 70
TIME: 3HRS
Note: 1. Atempt all Sections. If require any missing data, then choose suitably.
SECTION A
2 x7= 14
Attempt all questions in brief. Marks CO
Q no. Question
2
a. Explain the difference betvween the P-N junction diode and Light-Emitting
diode.
2 2
b. Why BJT is called a current controlled device?
What is the basic difference between JFET and MOSFET? 2 2
2 4
d, Add binary numbers (1 110.10 +1011.11)2.
Simplify the Boolean function F = XY + XYZ +YZ using Boolean 2 4
e
algebra. 2 3
Explain the concept of virtual ground in OP-Amp. 2 5
Write the two applications of Satellite comnmunication.
SECTION B
7x3-= 21
2. Attempt any three of the following:
a. Define the static and dynamic resistance of the Dióde. Also differentiate7 1
between Transition and Diffusion capacitance.
b. Draw and explain the working of the PN-P Transistor in common-base 7
(CB) configuration with its characteristic graphs.
Define the common mode rejection patio. Determine the output voltage 3

of a differential amplifier for thè input voltages of 300uV and 240uy

The differential gain is 5000,ahd the value of CMRR is 100.
4
Perform the following as mentioned: 56\
(i) Convert (63.250)1o to binary number.
(ii) Convert (1001l0.101)2 to decimal number.
(iii) Convert (A6B.0F) 16 to octal number.
(iv) Perform subtraction using 2's complement (iDMo10)2.
gates.
(v) ok Design AND, OR, and NOT gates usingonly NOR
5
e Explain the need of modulation in the communication system. 7

SECTIQN 7x1=7
3. Attempt any one part of the following:
with
Draw and explain the construction and working of N-channel JFET
7

characteristic graphs.
Draw and explain the construction and working of P-channel Depletion7
2
b.
MOSFET with characteristic graphs. 7 x1 =7
4. Attempt any one part of the folloving:
7
a Determine and draw the output voltage of givén network.
R
Si
Output
V=5V
Voltage

GP240P2 192 15-03-2024 0853:5G 103.211.52 E3

 Printed Page: 2 of 2
Subject Code: BEC101
PAPER ID-311338
Roll No:23o9l2)
BTECH
(SEM I) THEORY EXAMINATION 2023-24
FUNDAMENTALS OF ELECTRONICS ENGINEERING
TIME: 3HRS M.MARKS: 70
b 1
Determine and draw the output voltage of given network. 7

ViÁ
HE+
Wwm
15 V

t Output
RL
Voltage
-20 V
VESV

5. Attempt any one part of the following: 7x1=7

Q no. Question Marks CO

Draw the circuit diagram and explain the working of the Subtractor 3
using OP-Amp. Also, derive the expression for the output voltage.
Determine the output voltage of the given network. J32115
8 1
3
3
330K
470K
33K2
V1=12mV OvW 47 K2

oVouT
47 K2

V2=18mV

6. Attempt any one part of the following: 7x 1=7

Qno. Question Marks CO
Simplify the function F= Em(0,3,5,7,8,9,10,12,13)4d(1,6,11,14) using 7 4
K-map and implement the simplified expre_sionusing NAND gates
only.
b
Simplify the function F= IM (0, 2, 10, 16z 14, 15)-IId (5,13)using 4
K-map and implement the simplified bxpression using NOR gates
only.
7 Attempt any one part of the following: 7x1 =7
Q no. VOiestion Marks CO
In an amplitude-nmodulatedwave, derive the expression for 5
(i) Amplitude of sidebands
(ii) Sideband frequencies
(iii) Modulation Index
(iv) Modulation Efficiency
b Write short notes on 7
(i) Amplitude Modulation technique
(ii) Radar Communication

QP24OP2 192 15-03-2024 08:53:561 103.211.57 83

 Printed Page: I of 2
Subject Code: BASI05
PAPER ID-311770
Roll No:23o44 2 ) 5 5
BTECH
(SEM I) THEORY EXAMINATION 2023-24
SOFT SKILLS
M.MARKS: 70
TIIME: 3HRS

Note: 1. Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
2x7= 14
1. Attempt all questions in brief. Marks CO
Ono. Question
Give appropriate wvord as directed and use that word in a sentence: 2
Fragile (Give Antonym)
2. Niche (Give Synonym)
2
Change as directed and use that word in a sentence:
List (Change in Verb using Prefix)
2. Courage (Change in Adverb using Suffix)
2
Differentiate the followings and make sentence:
Heir
2. Hare
2 2
Distinguish listening from hearing.
Differentiate slkimming and scanning reading styles. 2 3

Explore the concept of body language in communication.

2 4
Describe the meaning of mental health 2

SEÇT0ON B 7x3 = 21
2. Attempt any three of the following:
Select appropriate word forsubject verb agreement: 1
a.
L The politician and statesman ....no more. (is/are)
2. The mother along with he children ......waiting for the bus. (is/are)
3. Gold and silver .... precious metals. (is/are)
4. The leader as well as his followers arrested. (waswere)
5. Where they have gone ...a mystery. (is/are)
r6. Neither Rahul nor his brothers French. (speak/speaks)
7. Being able to speak several languages....... an advantage. (is/are) 7 2
b Discuss the traits ofa good listener.
7 3
C. Explore various paragraph construction methods. 4
Illustrate the benefits of effective oral communication.
7

Listening and responding are closely related terms.? Explain.

7
e.

SÉCTION C
7x1=7
3. Attempt any one part of the following: 1
Change as directed:
Tell me the truth. (Complex Sentence)
2. He went to the doctor because he was sick. (Simple Sentence)
3. He is a speaker who is very confident. (Simple Senterce)
4.He saw a pathetic scene. (Complex Sentence)
S.Ibelieve that he is innocent. (Simple Sentence)
6. In spite of his riches he is unhappy. (Compound Sentence)
A.HHe acted as a wise man does. (Simple Sentence) 7
Evaluate various word formation methods.
b.
1|Pa ge
aP24DP2 192| 22-03-2024 08:54:06 103.21157 83
 Printed Page: 2 of 2
Subjcct Code: BASIO5
PAPER ID-311770
Roll No: 2Bo 4921 55oo79
BTECH
(SEM ) THEORY EXAMINATION 2023-24
SOFT SKILLS
M.MARKS: 70
TIME: 3HRS
7x 1=7
4 Attempt any one part of the following:
Explore two modes and fivetypes of listening. 2
b. Justify the importance of content sequencing in speaking style.
7x1=7
Attempt any one part of the following:
3
Draft an aligning notice and agenda for the annual meeting of a
company. Create necessary details by yourself.
3
Prepare a recommendation letter for internship of behalf of your
7
b.
institution for a company. Create necessary details by yourself.
7x1=7
6. Attempt any one part of the folloving: 4
a. Confidence, clarity, and fluency make your public speech effective. 7

Justify. 4
b. Explore various presentation strategies to make your presentation 7
effective.
7. Attempt any one part of the following: 7x1= 7
Aleader is not a searcher for consensus but a molder of consensus by
his/her qualities. Explain.
4 As can help you mnanage stressat worklace Evaluate he statement.
OP2
122-03-20
0284
: 5 41
: 01
6

2 | Pa ge
GP24Dp2 192 I 22-03-2024 08:54:06 | 103.211.57
 Printed Page: I of 2
PAPER ID-311443 Subject Code: BASI03
Roll No:
23o49 2)5oo79
BTECH
(SEM) THEORY EXAMINATION 2023-24
TIME: 3HRS
ENGINEERING MATHEMATICS-I
M.MARKS: 70
Note: 1. Attempt all Sections. If require any missing data; then
choose suitably.
SECTION A
Attempt all questions in brief. 2 x 7= 14
Q no.
Question Marks
Find the product and sum of the eigen values for A
2
b
Find all symmetry in the curve y'(a? + x) = x(a2x). 2 2
C. Calculate the error in RifE = RI and possible errors in Eand Iare 30%
and 20% respectively. 2 3
d Determine the value of r' r 2 4
e.
Prove that B(p, q) = B (p + 1, q) + B(p,q + 1) 2 4
Prove that A = (6xy + z)i + (3x2 z)Ë+ (3xz? - y)k is
irrotational. 2 5
Find a unit normal vector to the surface
Xyz= 4 at the point
(-1,-1, 2). 2 5

SECTION B
Attempt any three of the following:
Solve the system of homogenous equations: 7x321
a, XË t xz t X3 + x4 = 0, xË + 3%2x3 + 4x4 = 0,
2x1 + X3 X4 =0
33110
If u= y'eylx +x2 tan ), show that
b. () x Ou +yu
dy =2u
7 2
ax2 t2xy axðy +v2 Oy2 2u.
C
Expandf(x, y) = e cos y about the point (1,") by Taylor's sereies. 7 3
Evaluate the integral [f, y-)dxdy; by changng the variables, D:
d Region in xy-plane bounded by the lines 7 4
yx= -3,yx = 1,y +x=, y 5.
Find the directional derivative of fx, y,z) = e2x cos yz at (0,0, 0) in
e the direction of the tangent to the eurve
a sin ,y= acos ,

SECTION C
3. Attempt any one part of the following: 7x1=7
2 27
a Determine eigen vectors for the matrix A = 2 7

4 6
Determine A-1, A-2 and A-3 ifA = 1 3 using Cayley
b.
1 -4
2 7 1
Hamilton theorem.

1|Pa ge
QP24DP2 192|18-032024 08:50.33 103.211.37 83
 Printed Page: 2 of 2
Subject Code: BASI03

Roll No: 2 3oy9 2)55 oo79

PAPER ID-311443

BTECH
(SEM I) THEORY EXAMINATION 2023-24
ENGINEERING MATHEMATICS-I
M.MARKS: 70
TIME: 3HRS
4. 7x1=7
Attempt any one part of the following:
a Ify = cos(msinx) then prove that 7 2
( 1 - x n t 2 (2n + 1)xy,1 + (m² -n')y,=0. Also find o
lfz =f (x, y), x=el + e-,y = e--e" then showthat 2
b. Oz Oz oz ôz
Ju

7x1=7
Attempt any one part of the following: y2-2
O(u,v) 7 3
If u3 + v3 =x+y,u2 + v² =x3 +y,then show a(x,) 2uv(u-)
The pressure P at any point (x, y, z) in space is P= 400 xyz, Find the 7 3
b. highest pressure at the surface of a unit sphere x2 + y2 + z? =1using
Lagrange's method.
7x1=7
6 Attempt any one part of the following:
Find the volume of the solid bounded by the coordinate planes and the 7 4
a. 1/2
surface =1.

b. Prove that B (m, n) = m+

Attempt any one part of the follóying:

Applying Gauss Divergence theorem, evaluate
of (the
JS [edydz yedzdx 3Zdxdy], where S is the surface
7 5
a

cylinder x² +y²=c,0szsh. 18-03-20

0 2
84:50:33

Prove that VrT = n(n + 1)r-2, where =xi + yËt zk (and hence 7 5
b. showthat V²()=0.

2|Page
QP24DP2 192| 18-03-2024 08:50:33 1 103.2i1.57.83