Model CB1V8

HCMOS/TTL CLOCK OSCILLATOR

FEATURES
• Standard 7x5mm Surface Mount Footprint
• HCMOS/TTL Compatible
• Fundamental and 3rd Overtone Crystals
• Frequency Range 1 – 70 MHz
• Frequency Stability, ±50 ppm Standard
(±25 ppm and ±20 ppm available)
• +1.8Vdc Operation
• Operating Temperature to –40°C to +85°C
• Output Enable Standard
• Tape & Reel Packaging
• RoHS/Green Compliant

DESCRIPTION
The CB1V8 is a ceramic packaged Clock
oscillator offering reduced size and enhanced
stability. The small size means it is perfect for
any application. The enhanced stability means it
is the perfect choice for today’s communications
applications that require tight frequency control.

ORDERING INFORMATION

CB1V8 M

FREQUENCY STABILITY FREQUENCY IN MHz

6 = ± 20 ppm (-20°C to +70°C only) M - indicates MHz and decimal point.
5 = ± 25 ppm Frequency is recorded with minimum 4
3 = ± 50 ppm (standard) significant digits to the right of the "M".
2 = ± 100 ppm (-40°C to +85°C only)
OPERATING TEMPERATURE RANGE
C = -20°C to +70°C (standard)
I = -40°C to +85°C

Example Part Number: CB1V83C032M7680

Document No. 008-0277-0 Page 1 - 4 Rev. B

٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠
٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠
 Model CB1V8
7x5mm Low Cost
HCMOS/TTL Clock Oscillator
ELECTRICAL CHARACTERISTICS

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNIT

Maximum Supply Voltage VCC - -0.5 - 7.0 V
Absolute Maximums

Storage Temperature TSTG - -55 - 125 °C

Frequency Range fO - 1.0 - 70 MHz
Frequency Stability ∆f/fO
20,25,50
- - - ± ppm
(See Note 1 and Ordering Information) or 100
Operating Temperature
Commercial TA - -20 70 °C
25
Industrial -40 85
Supply Voltage ± 10 %
VCC V
1.62 1.80 1.98
Supply Current
1.0 MHz to 20 MHz CL=15pF - - 5
ICC mA
20.1 MHz to 50 MHz CL=15pF - - 15
50.1 MHz to 70 MHz CL=15pF - - 15
Output Load CL - - 15 pF
Output Voltage Levels
Electrical and Waveform Parameters

Logic '1' Level VOH - 90%VCC - -

V
Logic '0' Level VOL - - - 10%VCC
Output Current
Logic '1' Level IOH VOH = 90%VCC - - -2
mA
Logic '0' Level IOL VOL = 10%VCC - - +2
Output Duty Cycle SYM @ 50% Level 45 - 55 %
Rise and Fall Time @ 10% - 90% Levels
1.0 MHz to 20 MHz CL=15pF - 6 8
TR, TF ns
20.1 MHz to 50 MHz CL=15pF - 3 4
50.1 MHz to 70 MHz CL=15pF - 1.5 3
Start Up Time TS Application of VCC - - 10 ms
Enable Function
Enable Input Voltage VIH Pin 1 Logic '1', Output Enabled 1.26 - -
V
Disable Input Voltage VIL Pin 1 Logic '0', Output Disabled - - 0.5
Standby Current IST VIL = 0.58V, Oscillator Stops - - 10 uA
Output Enable Time TPLZ VIH = 1.58V - - 8 ms
Phase Jitter tjms Bandwidth 12 kHz - 20 MHz - <1 - ps RMS
Notes:
1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and first year aging
at an average operating temperature of +40 °C.

Document No. 008-0277-0 Page 2 - 4 Rev. B

٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠٠٠
 Model CB1V8
7x5mm Low Cost
HCMOS/TTL Clock Oscillator
CMOS/TTL OUTPUT WAVEFORM TEST CIRCUIT, CMOS LOAD

Tr Tf

VOH + -
mA
90%, 80%, 2.4V
4 3
+ + .01uF
50%, 1.5V POWER
SUPPLY VM D.U.T. CL
- - Including probe
10%, 20%, 0.5V 1 2 capacitance.

UPTIME (t) VOL

PERIOD (T)
Enable Input
DUTY CYCLE = t/T x 100 (%)

D.U.T. PIN ASSIGNMENTS

ENABLE TRUTH TABLE
PIN SYMBOL DESCRIPTION
PIN 1 PIN 3 1 EOH Enable Input
Logic ‘1’ Output 2 GND Circuit & Package Ground
Open Output 3 Output RF Output
Logic ‘0’ High Imp. 4 VCC Supply Voltage

MECHANICAL SPECIFICATIONS

PACKAGE DRAWING MARKING INFORMATION

(7.0 ±0.2)
(1.4)
0.276 ±0.008 PIN 1 IDENTIFIER
0.055
1. ** - Manufacturing Site Code.
2. XXMXXXX - Frequency marked with 4 significant
(1.2) digits after the ‘M’.
0.047 3. YYWW – Date code, YY – year, WW – week.
CTS ** - 1V8 3 4
(5.0 ±0.2) (3.7)
XXMXXXX 0.197 ±0.008 0.146
● YYWW 2 1 NOTES
1. Termination pads (e4), barrier-plating is nickel
(Ni) with gold (Au) flash plate.
(5.08) 2. Reflow conditions per JEDEC J-STD-020.
0.200

(1.8)
MAX
0.071
(mm)
Key:
Inch

SUGGESTED SOLDER PAD GEOMETRY SUGGESTED REFLOW PROFILE

.071 [1.80]
300
Maximum 260°C, 10 seconds

C BYPASS .079 [2.00] Typical 245°C

4 3 200

Temp. 130°C
.165 [4.20] (°C)

100

1 2 0
[mm] 0 30 60 90 120 150 180 210 240 270 300
Key:
.200 [5.08] Inch Time (Seconds)

CBYPASS should be ≥ 0.01 uF.

Document No. 008-0277-0 Page 3 - 4 Rev. B

٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠٠٠
 Model CB1V8
7x5mm Low Cost
HCMOS/TTL Clock Oscillator
TAPE AND REEL INFORMATION

DIMENSIONS IN MILLIMETERS 17.5 2.0

Ø13

4.0 8.0 Ø1.50 1.75 2.40

2.10
120°

8.40 16.0
Ø60 Ø180
7.90

5.70
5.40
Ø23
DIRECTION OF FEED

Device quantity is 1,000 pieces per 180mm reel.

ENVIRONMENTAL SPECIFICATIONS

Temperature Cycle: 400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1
minute transfer time between temperatures.

Mechanical Shock: 1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3
mutually perpendicular planes (18 total shocks).

Sinusoidal Vibration: 0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles
each in 3 mutually perpendicular planes (9 times total).

Gross Leak: No leak shall appear while immersed in an FC40 or equivalent liquid at
+125°C for 20 seconds.

Fine Leak: Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent.

Resistance to Solder Heat: Product must survive 3 reflows of +260°C peak, 10 seconds maximum.

High Temperature Operating Bias: 2,000 hours at +125°C, maximum bias, disregarding frequency shift.

Frequency Aging: 1,000 hours at +85°C, full bias, less than ±5 ppm shift.

Moisture Sensitivity Level: Level 1 per JEDEC J-STD-020.

QUALITY AND RELIABILITY

Quality systems meet or exceed the requirements of ISO 9000:2000 standards.

Document No. 008-0277-0 Page 4 - 4 Rev. B

٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠٠٠
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

CTS:
CB1V8-3I-30M0000 CB1V8-3I-25M0000 CB1V83C020M4800 CB1V83C033M3300 CB1V83I025M0000
CB1V83I030M0000