Technical Data Sheet

ENXT P 25L WH PO PC SD

Edge Next LED Street Light 25W 757

Features
• Epoxy powder coated pressure die-cast aluminium
housing.
• Weatherproof gaskets provided for LEDs and control gear
compartments.
• LEDs are provided with non-yellowing modular secondary
lens optics.
• The driver used is specially designed to have built-in surge
voltage, open/short circuit protections.
• Side entry mounting for max. 38mm OD pipe bracket.
• Top maintenance: Access to driver is from the top.

Overall Tolerance ±3mm

General Information Operating and Electrical

Product Category LED Streetlight Input Voltage 140 to 270V AC
System Wattage 25W Input Frequency 50 Hz
Luminous flux (±10%) 2500 lm System Current in Amp. @240V AC 0.11A
Luminaire efficacy 100 lm/W Power Factor ≥ 0.95
Correlated Color Temperature 5665K ±355K THD <10%
Color Rendering Index > 70 Built-in Surge protection 4 kV
Maintenance of lumen output 50000 hrs.
Operating Temperature Range -10C to 50C

Product data and Ordering data Approval

Product Cat. Ref. ENXT P 25L WH PO PC SD Ingress Protection IP66
Product Code 113751 Mechanical impact protection IK08
Case Lot 06 nos.
Net weight 0.60 kg. Approx.

ILLUM/TDS/2021/SL/024 Rev-01, Dated.25/12/2020

Note : Data subject to variation due to change/improvement in the design, materials and processes.

ILUMINATION BUSINESS UNIT,

601, Rustomjee Aspiree, Bhanu Shankar Yagnik Marg,
Off Eastern Express Highway, Sion (E), Mumbai – 400 022.
Email : luminaires@bajajelectricals.com
 Technical Data Sheet

PRAZE F 120L WH NB-A5 TG SD

LED Flood light luminaire “Bajaj Praze”

Features
 Powder coated aluminium die-cast housing.
 Modular structure for a better heat management.
 Easy heat dissipation helps to extend Lifetime.
 LEDs are provided with secondary lens optics to get optimum optical
performance.
 The driver used is specially designed to have built-in surge voltage,
open/short circuit protections.
 External surge protection provided for additional safety.
 Convenient for installation & maintenance.

Overall Tolerance ±3mm

General Information Operating and Electrical

Product Category LED Area lighting Input Voltage 140 to 280V AC
System Wattage** 100W Input Frequency 50 Hz
Luminous flux** 12,000 lm System Current in Amp. @240V AC 0.42A
Luminaire efficacy* 120 lm/W Power Factor ≥ 0.95
Correlated Color Temperature 5665K ± 355K THD (@240V AC) <10%
Color Rendering Index >70 Built-in Surge protection 4 kV
Maintenance of lumen output 50,000 hrs. External Surge Protection 10 kV
Operating Temperature Range -10°C to +50°C
Beam Angle (±10%) 60°

Product data and Ordering data Approval

Product Cat. Ref. PRAZE F 120L WH NB-A5 TG SD Ingress Protection IP66
Product code 114046 Mechanical impact protection IK07
Case Lot 02 No.
Net weight 2 Kg. Approx.

* As per the IS 16107 part 2- sec1 clause no. 8.3, measured luminaire efficacy shall not be less than 90% of rated value.
**As per the IS 16107 part 2- sec1 and 16103 part 2, clause no. 7 and 8.1 respectively, measured luminaire wattage shall not vary by more than +10% of rated
value and luminaire lumen shall not vary by less than -10% of rated value.

Doc. No: ILLUM/TDS/2122/AL/041 Rev-01, Dated.08/12/2021

Note: Data subject to variation due to change/improvement in the design, materials and processes.

ILLUMINATION BUSINESS UNIT,

601, Rustomjee Aspiree, Bhanu Shankar Yagnik Marg,
Off Eastern Express Highway, Sion (E), Mumbai – 400 022.
Email : luminaires@bajajelectricals.com
 Technical Data Sheet

PRAZE F 180L WH NB-A5 TG SD

LED Flood light luminaire “BAJAJ PRAZE”

Features
 Graphite grey powder coated aluminium die-cast housing.
 Housing is designed for better heat management and easy heat
dissipation which helps to extend lifetime.
 LEDs are provided with secondary lens optics to get optimum
optical performance.
 The driver used is specially designed to have built-in surge voltage,
open/short circuit protections.
 External surge protection provided for additional safety.
 Convenient for installation & maintenance.

Overall Tolerance ±5mm

General Information Operating and Electrical

Product Category LED Area lighting Input Voltage 170 to 280V AC
System Wattage** 150W Input Frequency 50 Hz
Luminous flux** 18,000 lm System Current in Amp. @240V AC 0.65A
Luminaire efficacy* 120 lm/W Power Factor ≥ 0.95
Correlated Color Temperature 5665K ± 355K THD (@240V AC) <10%
Color Rendering Index >70 Built-in Surge protection 4 kV
Maintenance of lumen output 50,000 hrs. External Surge Protection 10 kV
Operating Temperature Range -10°C to +50°C
Beam Angle (±10%) 60°

Product data and Ordering data Approval

Product Cat. Ref. PRAZE F 180L WH NB-A5 TG SD Ingress Protection IP66
Product code 114123 Mechanical impact protection IK08
Case Lot 02 No.
Net weight 4 Kg. Approx.

* As per the IS 16107 part 2- sec1 clause no. 8.3, measured luminaire efficacy shall not be less than 90% of rated value.
**As per the IS 16107 part 2- sec1 and 16103 part 2, clause no. 7 and 8.1 respectively, measured luminaire wattage shall not vary by more than +10% of rated
value and luminaire lumen shall not vary by less than -10% of rated value.

ILLUM/TDS/2122/AL/054 Rev-01, Dated.22/12/2021

Note: Data subject to variation due to change/improvement in the design, materials and processes.

ILLUMINATION BUSINESS UNIT,

601, Rustomjee Aspiree, Bhanu Shankar Yagnik Marg,
Off Eastern Express Highway, Sion (E), Mumbai – 400 022.
Email : luminaires@bajajelectricals.com
 Technical Data Sheet

BJFL 200W LED I

LED Floodlight Luminaire “AMAZE”

Features
 Matt black textured powder coated pressure die-cast
aluminium LED housing designed to act as heat sink for
efficient dissipation of heat.
 White powder coated aluminium reflector.
 Heat resistant toughened glass provided with gasket
and SS clips to ensure ingress protection.
 LEDs are provided with secondary lens optics to get
optimum optical performance.
 Constant current LED driver used is specially designed
to have built-in surge voltage, open/short circuit
protections.
 Additional surge protection provided for safety.
 Luminaire is provided with a MS mounting bracket fixed
on pressure die-cast aluminium housing for aiming
adjustment.

Overall Tolerance ±2mm

General Information Operating and Electrical

Product Category LED Floodlight Input Voltage 140 to 280V AC
System Wattage 200W Input Frequency 50 Hz
Luminous flux (±10%) 24,000 lm System Current in Amp. @240V AC 0.85A
Luminaire efficacy 120 lm/W Power Factor > 0.95
Correlated Color Temperature 5700K±355K THD (@240V) <10%
Color Rendering Index >70 Built-in Surge protection 4 kV
Maintenance of lumen output 50,000 hrs. Additional Surge Protection 10 kV
Operating Temperature Range -10C to 50C
Beam Angle (±10%) 60°

Product data and Ordering data Approval

Product Cat. Ref. BJFL 200W LED I Ingress Protection IP66
Product Code 113680 Mechanical impact protection IK08
Case Lot 1 no.
Net weight 7.5 kg Approx.

ILLUM/TDS/2021/AL/044 Rev-02, Dated.21/01/2021

Note : Data subject to variation due to change/improvement in the design, materials and processes.

ILLUMINATION BUSINESS UNIT,

601, Rustomjee Aspiree, Bhanu Shankar Yagnik Marg,
Off Eastern Express Highway, Sion (E), Mumbai – 400 022.
Email : luminaires@bajajelectricals.com
 Technical Data Sheet

BJFL 350W LED WH PO

LED Floodlight Luminaire “AMAZE”

Features
 Matt grey powder coated pressure die-cast aluminium
housing.
 Matt grey powder coated pressure die-cast aluminium
frame with heat resistant toughened clear glass fixed
with SS screw.
 LEDs are provided with secondary lens optics to get
optimum optical performance.
 The drivers used are specially designed to have built-in
surge voltage, open/short circuit protections.
 External surge protection provided for additional safety.
 Luminaire is provided with a MS mounting bracket fixed
on pressure die-cast aluminium housing for aiming
adjustment.

Overall Tolerance ± 5mm

General Information Operating and Electrical

Product Category LED Floodlight Input Voltage 120 to 277V AC
System Wattage 350W Input Frequency 50 Hz
Luminous flux (±10%) 38,500 lm System Current in Amp. @240V AC 1.5A
Luminaire efficacy 110 lm/W Power Factor ≥0.95
Correlated Color Temperature 5700K ± 355K THD (@240V) ≤10%
Color Rendering Index >70 Built-in Surge protection 4 kV
Maintenance of lumen output 50,000 hrs. External Surge Protection 10 kV
Operating Temperature Range -10C to +50C
Beam Angle (±10%) 30°

Product data and Ordering data Approval

Product Cat. Ref. BJFL 350W LED WH PO Ingress Protection IP66
Product Code 113803 Mechanical Impact Protection IK08
Case Lot 1 No.
Net Weight 10.5 Kg. Approx.

ILLUM/TDS/2021/AL/056 Rev-01, Dated. - 02/03/2021

Note: Data subject to variation due to change/improvement in the design, materials and processes.

ILLUMINATION BUSINESS UNIT,

601, Rustomjee Aspiree, Bhanu Shankar Yagnik Marg,
Off Eastern Express Highway, Sion (E), Mumbai – 400 022.
Email : luminaires@bajajelectricals.com