TECHNICAL DATA SHEET
Version: 001
Update: November, 2023
CONSOL SS-300
High Range Water Reducer (Superplasticizer)
DESCRIPTION • Excellent plasticising effect, resulting in improved
CONSOL SS-300 is an innovative polycarboxylic ether flowability, placing and compacting behaviour.
(PCE) based superplasticizer ideally suited for concrete and Therefore suitable for the production of self-compacting
mortar. It is particulary developed for the production of high concrete.
flow concrete with exceptional flow retention properties. • Improved shrinkage and creep behavior.
CONSOL SS-300 complies with ASTM C494/C494M-19 for • Reduce rate of carbonation of the concrete.
type F admixtures. • Improved watertight behavior.
RECOMMENDED FOR PRODUCT DATA
CONSOL SS-300 is especially suitable for concrete mixes Form
Liquid
with prolonged transportation time and long workability,
powerful water reduction and excellent flowability. Appearance
CONSOL SS-300 is suitable for the production of both Turbid whitish liquid
precast concrete and ready-mix concrete. CONSOL SS-300
facilitates extreme water reduction, excellent flowablity with Packaging
the same time optimal cohesion and highest self-compacting 200 litres sealed drum.
behavior. 1000 litres IBC’s or tanker delivery on request.
CONSOL SS-300 is mainly used for the following
Storage
applications: Dry, shaded place. Protect from direct sunlight and frost
• Concrete with a very high water reduction (up to 30%)
• High performance concrete Shelf- Life
• Concrete in summer and with a prolonged transportation CONSOL SS-300 can be stored for 12 months if stored as
and workability time recommend in unopened original containers
• Watertight concrete
• Precast concrete
TECHNICAL DATA
• Ready mix concrete
Chemical Base
• Self compacting concrete
Modified polycarboxylate ether in water
• High strength concrete
• Mass concrete
Density
Specific density: 1.06 ± 0.02 kg/L (at 250C)
BENEFITS
CONSOL SS-300 as a powerful superplasticizer acts by INSTRUCTION FOR USE
different mechanisms. Through surface adsorption and
Dosage
sterical effects separating the binder particles the following
For flowing and self-compacting concrete 0.2 – 2.0 % by
properties are achieved
weight of cement.
• Extremely powerful water-reduction, resulting in high
density, high strength and reduced permeability.
TECHNICAL DATA SHEET
Version: 001
Update: November, 2023
Dispensing
CONSOL SS-300 is added to the gauging water or added
with it into the concrete mixer.
To take advantage of high water reduction, a wet mixing time
of at least 60 seconds is recommended. To avoid excess water
in the concrete, final dosage must start after 2/3 of wet mixing
time only.
Application
CONSOL SS-300 is a liquid admixture to be added to the
concrete during the mixing process. The best results are
obtained when the admixture is added after all the other
components are already in the mixer and after the addition of
at least 80% of the total water.
PRECAUTIONS
Health: CONSOL SS-300 does not not contain any hazardous
substances requiring labeling. It is safe for use with standard
precautions followed in the construction industry, such as use
of hand gloves, safety goggles, etc. For detail health, safety
and environmental recommendations, please consult and
follow all instruction on the Material Safety Data Sheet.
