Copyright by SAUDI ENTERTAINMENT VENTURES (SEVEN).

All rights
12MM STRUCTURAL M
reserved. This document may not, in whole or in part, be reproduced, stored,
COMPRESSIBLE STRUCTURAL SLAB 12 MM COMPRESSIBLE N transmitted or distributed in any form or by any means, whether electronic,
FILLER WITH 12 MM COMPRESSIBLE STRUCTURAL BEAM mechanical, by photocopy, recording or otherwise, without the prior written
BEAM FILLER WITH SEALANT permission of SEVEN. Except where otherwise expressly agreed in writing by
SEALANT AND FILLER WITH SEALANT METAL ANGLE SEVEN, SEVEN shall have no responsibility or liability for any loss (direct,
AND BACKER RODAT
BACKER RODAT AND BACKER ROD AT consequential or otherwise) which may arise from reliance on or use of this
100*150*2MM EDGES document or the information contained therein.
EDGES EDGES FOR EXTERNAL FINISHES,REFER
TO ELEVATIONS DO NOT SCALE THIS DRAWING.

METAL ANGLE 20 MM PLASTER

METAL ANGLE STRUCTURAL SLAB
100*150*2MM 150*100*2 MM
INTERNAL FINISH
20 MM PLASTER
METAL ANGLE STRUCTURAL
100*150*2MM BEAM
METAL PLATE
SOLID CMU BLOCK WALL 150*150*2MM
20 MM PLASTER
20 MM PLASTER METAL ANGLE
CMU BLOCK WALL
20 MM PLASTER SOLID CMU 150*100*2MM 12 MM COMPRESSIBLE
BLOCK FILLER WITH SEALANT
WALL CONCRETE SLAB AND BACKER RODAT
CMU BLOCK
WALL EDGES
CMU BLOCK WALL 010-SITE PLAN
CONCRETE CMU BLOCK WALL 20 MM PLASTER
SLAB CONCRETE SLAB GENERAL NOTES:
1. UNLESS OTHERWISE NOTED, ALL DIMENSIONS ARE IN MILLIMETERS AND ELEVATION LEVELS ARE IN METERS
ANDANGLES IN DEGREE.
DESCRIPTION THICK DESCRIPTION THICK DESCRIPTION THICK 2. ALL FINISH FLOOR LEVELS EL +0.00 AS SHOWN ON THE ARCHITECTURAL SHOP DRAWINGS ARE ABSOLUTE AND
TYPE TYPE TYPE ARE DEVELOPED ACCORDING TOTHE LEVELS -1.75 AS PRESENT IN THE SITE SURVEY.
3. DRAWINGS ARE NOT TO BE SCALED, WRITTEN DIMENSIONS SHALL BE FOLLOWED.
"BW1" CONCRETE MASONRY UNITS, UP TO STRUCTURAL ELEMENT 100mm "BW2" CONCRETE MASONRY UNITS, UP TO STRUCTURAL ELEMENT "BW3" CONCRETE MASONRY UNITS, UP TO STRUCTURAL ELEMENT 4. ALL DIMENSIONS TO BE VERIFIED ON SITE.
200mm 250mm 5. ALL DOOR JAMB IS AT 200MM FROM NEAREST ADJACENT WALL FACE,UNLESS NOTED OTHERWISE.
LEVEL+ FINISH TOLERANCE CONSIDERED ON BOTH SIDES LEVEL+ FINISH TOLERANCE CONSIDERED ON BOTH SIDES LEVEL+ FINISH TOLERANCE CONSIDERED ON BOTH SIDES 6. CORNER GUARDS SHALL BE PROVIDED FOR ALL WALL / COLUMN CORNERS EXPOSED TO THE DRIVEWAY IN THE
CARPARKING AREA.
STRUCTURAL METAL PLATE 7. FOR GENERAL NOTES, LEGENDS, SYMBOLS AND ABBREVIATIONS REFER TO SHEET NUMBER (00001).
METAL PLATE 12 MM COMPRESSIBLE METAL PLATE SOLID CMU MEP OPENING 8. FOR SITE & LANDSCAPE REFER TO LANDSCAPE SHOP DRAWING.
METAL TIE 40*200*50MM METAL PLATE SOLID CMU BOND BEAM BEAM 150*150*2MM
150*150*2mm FILLER WITH SEALANT 150*150*2mm 500*950MM 9. FOR WALL TYPES & DETAILS REFER TO SHEET NUMBER (80001).
? @ Every Second Course 150*150*2MM BLOCK WALL (150*200MM) 10. FOR FINISHES AND MATERIALS LIST REFER TO SHEET NUMBER (90001).
AND BACKER RODAT With Expansion Bolt 11. FOR ROOF PARAPET WALL TYPE, IT SHALL BE (BW1) WITH REFERRING TO WALL TYPES & DETAIL;
With Expansion Bolt 1.5 MM THK. With Expansion Bolt
EDGES PARAPET/UPSTAND IN THE STR. DRAWINGS.
12. FOR THE EXACT LOCATION AND SIZES OF MEP OPENING, DRAINS & FIXTURES REFER TOTHE FINAL MEP CO-
STRUCTURAL STRUCTURAL ORDINATION SHOP DRAWING.
12

12
12
COLUMN 13. WET AREA, STAIRS, RAMPS & ENLARGED DRAWINGS WILL BE SUBMIT IN A SEPARATE DRAWINGS.
COLUMN 14. ALL SHOP DRAWINGS, SAMPLES, CATALOG, CUTS, ETC. TO BE SUBMITTED FOR THE CONSULTANTBEFORE
To be 25 MM as per THE FINAL EXECUTION.

838

843
project Specifications
METAL PLATE
150*150*2MM
With Expansion Bolt
12 MM COMPRESSIBLE
FILLER WITH SEALANT

300
LINTEL AND BACKER ROD AT
200*300MM

EQ.
EDGES
2148

2148

2148

950
MEP OPENING
950*500MM BIM COORDINATION
CHECKED NAME CHECKED NAME
BIM COORDINATOR Walid El Sibaai FIRE FIGHTING Moataz Helal
2040 200 4120 4.8MM STEEL ARCHITECTURAL Omar Abdullah MECHANICAL Moataz Helal

LINTEL WIRE LADDER STRUCTURAL Abdel Kareem Mostafa HVAC Moataz Helal
CIVIL Abdel Kareem Mostafa ELECTRICAL Essam Khaled
( 200*300MM) @ Every PLUMBING Moataz Helal LOW CURRENT Essam Khaled
150 1018 182 1559 500 346 Second Course BIM REFERENCES (SD)
NO. MODEL NO. MODEL TITLE.

817
DATE
150

150

150

150
01 6JAZN11-FNC-SD-200-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL 11/02/2024
SOLID CMU 02 6JAZN11-FNC-SD-300-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL 11/02/2024
BLOCK WALL 03 6JAZN11-FNC-SD-710-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL 11/02/2024
20

04 6JAZN11-FNC-SD-720-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL 11/02/2024

05 6JAZN11-FNC-SD-722-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL 11/02/2024

218
06 6JAZN11-FNC-SD-730-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL 11/02/2024
300

07 6JAZN11-FNC-SD-735-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL 11/02/2024

2882 200 673 11/02/2024
08 6JAZN11-FNC-SD-740-AR-MOD-0000 FEC ARCHITECTURAL REVIT MODEL

1- Between Stiffeners 400 1040 400 BOND BEAM REVISION

REV. DESCRIPTION CODE DATE

4150
and door opening, we 200*150MM
00 ISSUED FOR APPROVAL 11/02/2024
2040 must have masonry. MEP OPENING
2- Lintel beam and Bond 218*200MM
beam connection ?
3- Consider the kind of

2520
2500

RELATED REFERENCES (SD) RELATED REFERENCES (IFC)

block in this detail
2220

REFERENCE NO. REV. Date REFERENCE NO. REV. Date

EQ.
specially solid block. HOLLOW CMU

2460
BLOCK WALL

4.8MM STEEL
WIRE LADDER
@ Every Second
100

100

100
Course

DOOR OPENING METAL TIE 40*200*50MM DOOR OPENING DOOR OPENING

(2040*2500MM) @ Every Second Course (1040*2220MM) (2520*3840MM) Every 2 courses
1.5 MM THK.
SOLID BLOCK MASONARY HOLLOW BLOCK MASONARY Client

2633 200 2533 200 2633 Wall Acoustics Description Acoustics Type
Project Management Consultant
55DB 200 MM THICK SOLID CONCRETE MASONRY BLOCK OF DENSITY 2000 KG/M3 -
60DB 200 MM THICK SOLID CONCRETE MASONRY BLOCK OF DENSITY 2000 KG/M3 +
A
50MM AIR GAP & GYPSUM + 50MM ACOUSTIC PANELS
60DB 200 MM THICK SOLID CONCRETE MASONRY BLOCK OF DENSITY 2000 KG/M3 + B Design Consultant INTERNATIONAL
RESILIENT GYPSUM(15MM) CLADDING WITH INSULATION(50MM)
ENGINEERING
STRUCTURAL STRUCTURAL 60DB 250 MM THICK SOLID CONCRETE MASONRY BLOCK OF DENSITY 2000 KG/M3 CONSULTANCY
C
STRUCTURAL METAL TIE 40*200*50MM SOLID CMU STIFFENER SOLID CMU STIFFENER SOLID CMU METAL TIE 40*200*50MM STRUCTURAL WITH 20MM PLASTER FINISH ON BOTH SIDES. Olaya street 7252, 13326 Riyadh, Saudi Arabia
COLUMN @ Every Second Course BLOCK WALL (200*200MM) BLOCK WALL (200*200MM) BLOCK WALL @ Every Second Course COLUMN 60DB 200 MM THICK SOLID CONCRETE MASONRY BLOCK OF DENSITY 2000 KG/M3 + General Contractor
1.5 MM THK. 1.5 MM THK. D
225MM GRC CLADDING.
SOLID BLOCKWORK MASONARY WITH CONCRETE COLUMN 65DB 250 MM THICK SOLID CONCRETE MASONRY BLOCK OF DENSITY 2000 KG/M3 +
A
225MM GRC CLADDING.
65DB DOUBLE MASONRY WALL WITH ONE LAYER OF 200 MM SOLID CMU BLOCK Sub Contractor
B
WALL WITH DENSITY 2400 KG/M3 + AIR GAP (100mm) + 100MM SOLID CMU
100 mm

WALL FIRE RATING LINTEL BEAM SCHEDULE BLOCK WALL WITH DENSITY 2400 KG/M3.
SOLID CMU FIRE RATING DESCRIPTION W (MM) B (MM) D (MM) 65DB ≥300 MM THICK REINFORCED CONCRETE OF DENSITY 2400 KG/M3 WITH
BACKROD C Project Title
CEMENT BLOCK WALL 1FB 1HR FIRE RATED WALL 20MM PLASTER FINISH ON BOTH SIDES.
PLASTER FINISH & 70DB
SEALANT 2FB 2HR FIRE RATED WALL 2000 OR LESS 200 300 DOUBLE MASONRY WALL WITH ONE LAYER OF 200 MM SOLID CMU BLOCK - JAZAN ENTERTAINMENT COMPLEX
JOINT SEALANT N/A NON FIRE RATED WALL WALL WITH DENSITY 2400 KG/M3 + AIR GAP (100mm) + 200MM SOLID CMU Building Name
WITH BACKING ROD( AS PER 3000 OR LESS 200 400 BLOCK WALL WITH DENSITY 2400 KG/M3.
010- SITE PLAN
SCANNING SCALE

APPROVED MATERIAL)
STIFFENER SCHEDULE 3000 TO 4000 200 500
50 mm

BOND BEAM SCHEDULE Drawing Title

6JAZN11-FNC-SD-010-AR-MOD-00000
S1 250MM X 250MM
LINTEL LENGTH MUST EXCEED THE *H/T= 16 FOR EXTERNAL WALLS
S2 200MM X 200MM
HDG BLOCK LADDER MG BUTTERFLY TIE OPENING LENGTH BY AT LEAST 400MM ON EACH SIDE *H/T= 24 FOR INTERNAL WALLS WALL TYPES AND DETAILS
(200*3000*345*48MM) S3 100MM X 100MM
(75*200*4MM) GENERAL NOTES:
WALL FUNCTION WALL HEIGHT H (MM) WALL THK. T (MM) BOND BEAM THK. (MM) BOND BEAM HEIGHT (MM)
HOLLOW CMU BLOCK 200MM THK. −ALL EDGES OF WALL MUST BE ATTACHED WITH A STRUCTURAL COLUMN
BACKROD & SEALANT OR A STRUCTURAL BEAM. INTERIOR WALL 4800 OR MORE 200 200 150 DRAWN BY : Y.N YASMINE NABIL DATE 11/02/2024
−IN CASE OF TOP OF A WALL IS NOT CONSTRUCTED TO REACH THE UPPER
6000 OR MORE 250 250 150 REVIEWED BY : M.M MAHA MAMDOUH SCALE As indicated
FLOOR OR BEAM. A TIE BEAM MUST BE CASTED ON TOP ALONG THE WALL. APPROVED BY : SHEET SIZE
01 RC COLUMN CONNECTION PLAN 02 STEEL COLUMN CONNECTION PLAN −STRUCTURAL COLUMN AND WALL MUST BE FASTENED TOGETHER EXTERIOR WALL 3200 OR MORE 200 200 150
Y.S

Drawing & Transmital No.

YASMEEN SAID A1
10 mm

010-AR-DWG-80001 010-AR-DWG-80001 −METAL TIE 40*200*50 ALTERNATELY EVERY 2 BLOCK HEIGHT (400mm)
1 : 20 1 : 20 4000 OR MORE 250 250 150 6JAZN11- FNC- SD-010-AR-DWG-80001
PROJECT CODE ORIGINATOR Development Stage BUILDING NO. DISC D. TYPE SEQUENCE NO.