LEDController LEDController
P8XMultizonetouchpanel
8 level
compllant
3yT
WARRANTY
2.4G
Receiver Distance: 30m
25mm 55.5mm
The matching method between panel and receiver:
learning ID: Press ID learning button on the receiver for 3 seconds. when the indicator light is on, press any zone
62mm
86mm
62mm
key on the touch panel,the indicator light flashes ( the frequency is 1Hz) , activated.
Cancel ID: Press ID learning button on the receiver for 5 seconds. When the indicator light flashed quickly ( the
frequency is 5Hz) , and all learnt IDs have been canceled.
Install Uninstall Notice: The receiver can memorize up to 8 IDs. When receiving control information from any learnt ID, it can be
86mm 11mm controlled. If the memorized ID up to 8, long press learning key for 3 seconds to get out of the learning status,
cancel the ID and reset. The receiver can not record the different zone on the same panel, if you want to control
the other zone with the same panel, you need to cancel the ID and reset.
After-Sales:
From the day you purchase our products within 3 years, if being used properly in accordance with the
instruction, and quality problems occur, we provide free repair or replacement services except the following
cases:
1.Any defects caused by wrong operations.
2.Any damages caused by inappropriate power supply or abnormal voltage.
3.Any damages caused by unauthorized removal, maintenance, modifying circuit, incorrect connections and
replacing chips.
4.Any damages due to transportation, breaking, flooded water after the purchase.
AC220V/110V
5.Any damages caused by earthquake, fire, flood, lightning strike etc force majeure of natural disasters.
6.Any damages caused by negligence, inappropriate storing at high temperature and humidity environment
or near harmful chemicals.
7.Product has been updated.
Kindly Reminder:
1.Power Source Selection
Power source must be DC constant voltage type of power supply. Due to the efficient output in some power
supplies are only 80% of total, so please select at least 20% higher output power supply than the
R4-CC-2.4G consumption of LED lights.
OUTPUT LED
LED CONTROLLER V V V V V
DC RF Receiver W WW WW R R
12-48VDC
DC W CW NW G G
W WW CW B B
ADDRESS
SETTING W CW W
max. 4x350/700mA
ON OFF
ON OFF
700mA 350mA
DC12V-48V
R4-CC-2.4G
OUTPUT LED
LED CONTROLLER V V V V V
DC RF Receiver W WW WW R R
12-48VDC
DC W CW NW G G
W WW CW B B
ADDRESS
SETTING W CW W
max. 4x350/700mA
ON OFF
ON OFF
700mA 350mA
DC12V-48V
R4-CC-2.4G
OUTPUT LED
LED CONTROLLER V V V V V
DC RF Receiver W WW WW R R
12-48VDC
DC W CW NW G G
W WW CW B B
ADDRESS
SETTING W CW W
max. 4x350/700mA
ON OFF
ON OFF
700mA 350mA
DC12V-48V
R4-CC-2.4G
OUTPUT LED
LED CONTROLLER V V V V V
DC RF Receiver W WW WW R R
12-48VDC
DC W CW NW G G
W WW CW B B
ADDRESS
SETTING W CW W
max. 4x350/700mA
ON OFF
ON OFF
700mA 350mA
DC12V-48V
