SURABHI ENTERPRISE

GNB ROAD AMBARI

GUWAHATI 781001
PHONE NO 09854051290

PRICE OFFER ALONGWITH BOQ FOR AIR CONDITIONING WORKS

CLIENT NAME: DATE: 13.06.2024
ADDRESS: DIGARU, ASSAM QUOTATION NO. SR-AF-DIG-482/2024-2025

Sr. No Description Qty Unit Rate Amount

(in Rs.) (in Rs.)
1 2 3 4 5 6
PART-A (HIGH SIDE SUPPLY &INSTALLATION PART)
01. Refrigeration Machines - 3 Nos (2W +1S)
Supply of WATER COOLED SCROLL CHILLER of 40TR capacity complete with multiple SCROLL 03 Nos. 1,168,200.00 3,504,600.00
compressors, chillers with inlet and outlet victaulic coupling assembly, refrigerant, oil, microprocessor
control panel compatible for hook up to building management system with weather proof electrical
panel, power isolators and capacitors, flow switches, transformer for control circuit, service modem
connectivity and all electricals in accordance of the seismic requirements. Nominal cooling capacity
shall be met with following design parameters :-
(i) Evaporator - Shell and Tube Type
(ii) Condenser - Shell and Tube Type
(iii) Refrigerant -R410A
(iv) Chilled Water Leaving Temperature : 44.6 degF (7 degC)
(v) Chilled Water Entering Temperature : 53.6 degF (12.2 degC)
(vi) Chiller Fouling Factor : 0.0001 FPS Unit
(vii) Ambient Temperature : 100.4 degF (38 degC)
(viii) Maximum Permissible IKW/TR : 1.20 (on full load)
(ix) Minimum COP : 3.12
(x) Minimum IPLV : 5.66

02. AIR HANDLING UNITS- 2 Nos (1W +1S)

Supply of double skin cabinet type AHU with backward curve centrifugal fan, insulated sandwich type 02 Nos 805,000.00 1,610,000.00
SS drain tray, coil section with six row deep cooling coil, door limit switch, non flammable filters,
nonflammable motor floor mounted vibration isolators for the fan motor assembly, outlet dampers
all accessories etc. AHU capacity shall be 16000cfm against 40mm static pressure having 6 rows deep
cooling coil & 2 rows deep hot water coil.

03. Hot Water Gennerator (HWG) -2 Nos (1w+1S)

Supply of electrically operated Hot Water Generator of 45KW (having 03 banks of 15 KW each) capacity 02 Nos. 811,348.00 1,622,696.00
made of 10mm M.S sheet having 16 gauge stainless steel lining with heaters arranged in banks and
controlled by thermostat so that required qty of hot water is generated at 55°C with nominal variation
including 100mm thick resin bonded fiber glass insulation of 24 kg / CUM density finished with 125mm
thick aluminium sheet cladding including necessary eletrical panel with automatic controls including
inlet and outlet connections for water complete with pressure release valve, low level cut-out, auto-
vent, sight-glass all as per specification complete as required and approved (Degree of protection shall
be IP-52 with IS 2147).

04. Induced draft FRP Cooling Tower with complete fittings and accessories of following capacity :-

(a) Cooling Tower-50 TR 03 Nos. 537,000.00 1,611,000.00

TOTAL Rs. 8,348,296.00

GST @28% ie Rs. 2,337,522.88
TOTAL OF HIGH SIDE Rs. 10,685,818.88

Page 1 of 7
 SURABHI ENTERPRISE
GNB ROAD AMBARI
GUWAHATI 781001
PHONE NO 09854051290
PART-B (HIGH SIDE INSTALLATION, LOW SIDE SUPPLY & INSTALLATION PART)
01. Refrigeration Machines - 3 Nos (2W +1S)
Transporting to site, installation, testing and commissioning of WATER COOLED SCROLL CHILLER of 03 Nos. 85,000.00 255,000.00
40TR capacity complete with multiple SCROLL compressors, chillers with inlet and outlet victaulic
coupling assembly, refrigerant, oil, microprocessor control panel compatible for hook up to building
management system with weather proof electrical panel, power isolators and capacitors, flow
switches, transformer for control circuit, service modem connectivity and all electricals in accordance
of the seismic requirements. Nominal cooling capacity shall be met with following design parameters :-
(i) Evaporator - Shell and Tube Type
(ii) Condenser - Shell and Tube Type
(iii) Refrigerant -R410A
(iv) Chilled Water Leaving Temperature : 44.6 degF (7 degC)
(v) Chilled Water Entering Temperature : 53.6 degF (12.2 degC)
(vi) Chiller Fouling Factor : 0.0001 FPS Unit
(vii) Ambient Temperature : 100.4 degF (38 degC)
(viii) Maximum Permissible IKW/TR : 1.20 (on full load)
(ix) Minimum COP : 3.12
(x) Minimum IPLV : 5.66

02. AIR HANDLING UNITS- 2 Nos (1W +1S)

Transporting to site, installation, testing and commissioning of double skin cabinet type AHU with 02 Nos 75,000.00 150,000.00
backward curve centrifugal fan, insulated sandwich type SS drain tray, coil section with six row deep
cooling coil, door limit switch, non flammable filters, nonflammable motor floor mounted vibration
isolators for the fan motor assembly, outlet dampers all accessories etc. AHU capacity shall be
16000cfm against 40mm static pressure having 6 rows deep cooling coil & 2 rows deep hot water
coil.

03. Hot Water Gennerator (HWG) -2 Nos (1w+1S)

Installation,Testing and Commissioning of electrically operated Hot Water Generator of 45KW (having 02 Nos. 45,000.00 90,000.00
03 banks of 15 KW each) capacity made of 10mm M.S sheet having 16 gauge stainless steel lining with
heaters arranged in banks and controlled by thermostat so that required qty of hot water is generated
at 55°C with nominal variation including 100mm thick resin bonded fiber glass insulation of 24 kg / CUM
density finished with 125mm thick aluminium sheet cladding including necessary eletrical panel with
automatic controls including inlet and outlet connections for water complete with pressure release
valve, low level cut-out, auto-vent, sight-glass all as per specification complete as required and
approved (Degree of protection shall be IP-52 with IS 2147).

04. Induced draft FRP Cooling Tower with complete fittings and accessories of following capacity :-

(a) Cooling Tower-50 TR 03 Nos. 43,000.00 129,000.00

05. Condenser Water Pumps - 3 Nos(2W+1S)
Supply, transporting to site, installation, testing and commissioning of Centrifugal Condenser 03 Nos 85,000.00 255,000.00
Water Pump of 48M³ per hour water flow capacity at 25 Mtr head, monoblock type with IP -55 TEFC
motor (not less than 5.5KW) suitable for outdoor installation mounted on common base frame FRP
coated for corrosion prevention, for re-circulation of chilled water for air conditioning system. The
pump motor shall be compatible to 415 + / - 10 % volts, 50 Hz, 3 phase power supply. The pump
shall have bronze impeller, stainless steel shaft and electrical power on /off push button or power
isolator near the pump. All electricals and motor to be IP-55.

06. Chilled Water Pumps - 3 Nos (2W+1S)

Supply, transporting to site, installation, testing and commissioning of Centrifugal Chilled Water 03 Nos 75,000.00 225,000.00
Pump of 40M³ per hour water flow capacity at 20 Mtr head, monoblock type with IP -55 TEFC motor
(not less than 5.5KW) suitable for outdoor installation mounted on common base frame FRP
coated for corrosion prevention, for re-circulation of chilled water for air conditioning system. The
pump motor shall be compatible to 415 + / - 10 % volts, 50 Hz, 3 phase power supply. The pump
shall have bronze impeller, stainless steel shaft and electrical power on /off push button or power
isolator near the pump. All electricals and motor to be IP-55.

Page 2 of 7
 SURABHI ENTERPRISE
GNB ROAD AMBARI
GUWAHATI 781001
PHONE NO 09854051290
07. Hot Water Generator Pumps - 2Nos (1W+1S)
Supply, transporting to site, installation, testing and commissioning of Centrifugal Back Pull Out, End 02 Nos 14,800.00 29,600.00
Suction Horizontal / Vertical inline split coupled Pump of capacity 33 USGPM at 25 Meters Head fitted
with suitable capacity squirrel cage induction motor ( IE2 class 'F' insulation TEFC and IP- 55 rated)
compatible for operation on 415 volts +10% , 50 Hz, AC supply with max speed of pump 3000 RPM
including mechanical seal, coupling guard and SS Impeller & other necessary accessories complete
(Working Temperature upto 60 deg C). Suction guide and Duty valve shall be supplied along with the
pumps.

08. Drain Piping

Supply, transporting to site & installation Hard PVC drain piping with elbows, tees, clean outs etc
without insulation within the AHU room of following sizes:-
(a) 50 mm dia 45 RMT 350.00 15,750.00

09. HOT Water Piping

Supply, transporting to site & installation of Hot Water Piping, MS heavy duty 'C' Class complete
with bends, elbows, tees, vibration isolators, hangers, full round high density PU supports
finished, with painted / color coated as approved of following sizes :-

(a) 100 mm dia 60 RMT 1,600.00 96,000.00

(b) 80 mm dia 50 RMT 1,200.00 60,000.00
(c) 65 mm dia 10 RMT 1,100.00 11,000.00
(d) 50 mm dia 10 RMT 990.00 9,900.00
(e) 40 mm dia 54 RMT 860.00 46,440.00
(f) 32 mm dia 30 RMT 650.00 19,500.00

10. Chilled Water Piping

Supply, transporting to site & installation of Insulated Chilled Water Piping, MS heavy duty 'C' Class
complete with with bends, elbows tees, vibration isolators, hangers, full round high density
finished, 50mm thick expanded polystyrene pipe sections finished of following sizes :-

(a) 100 mm dia 60 RMT 1,800.00 108,000.00

(b) 80 mm dia 40 RMT 1,400.00 56,000.00
(c) 65 mm dia 10 RMT 1,200.00 12,000.00
(d) 50 mm dia 10 RMT 1,050.00 10,500.00
(e) 40 mm dia 54 RMT 980.00 52,920.00
(f) 32 mm dia 30 RMT 790.00 23,700.00

11. Supply, transporting to site & installation of insulated butterfly valves with flanges, gaskets,
bolts and nuts etc of following sizes :-
(a) 100 mm dia 12 Nos 9,100.00 109,200.00
(b) 80 mm dia 06 Nos 8,570.00 51,420.00
(c) 65 mm dia 04 Nos 5,800.00 23,200.00
(d) 50 mm dia 04 Nos 4,800.00 19,200.00

12. Supply, transporting to site & Installation of Ball Valves of following sizes :-
(a) 40 mm dia 18 Nos 4,200.00 75,600.00
(b) 32 mm dia 08 Nos 3,500.00 28,000.00

13. Supply, transporting to site & Installation of Blancing Valve of following sizes :-
(a) 100 mm dia 02 Nos 32,000.00 64,000.00
(b) 65 mm dia 02 Nos 20,000.00 40,000.00

14. Supply, transporting to site & Installation of Non Return Valve of following sizes :-
(a) 100 mm dia 04 Nos 8,540.00 34,160.00
(b) 80 mm dia 02 Nos 5,880.00 11,760.00

15. Supply, Installation & Commissioning of Flexible Connector of following sizes.

(a) 100 mm dia 12 Nos 16,800.00 201,600.00
(b) 80 mm dia 04 Nos 14,000.00 56,000.00
(c) 65 mm dia 04 Nos 12,600.00 50,400.00
16. Supply, Installation & Commissioning of insulated MS body EXPANSION TANK with pressurization unit 01 Nos 556,000.00 556,000.00
as per the site requirement of 300 Ltr capacity.
17. Supply & installation of necessary make up water tank of capacity 500Ltr as per the site requirement. 01 Nos 15,000.00 15,000.00

Page 3 of 7
 SURABHI ENTERPRISE
GNB ROAD AMBARI
GUWAHATI 781001
PHONE NO 09854051290
18. Insulated Y stariners at the inlet of the AHU with flanges, gaskets GI nuts and bolts etc. of following
sizes :-
(b) 100 mm dia 09 Nos. 9,800.00 88,200.00
(a) 80 mm dia 04 Nos. 4,800.00 19,200.00

19. Supply and fixing of four inch Pessure gauge with 0 to 7 Kg/cm² range with isolating ball vave and 20 Nos 3,800.00 76,000.00
nipple.
20. Supply and fixing of Thermometers with a range of 0 to 55°C. 20 Nos 2,305.30 46,106.00
21. Supply and installation DESCALING TEE. 03 Nos 3,800.00 11,400.00
22. Supply and installation of air purge at the top most level of the chilled water circuit of Anergy 14 Nos 3,800.00 53,200.00
or equivalent make with 35 Nb Ball Valve.
23. Supply and installation of Water Flow Switch. 05 Nos 3,263.25 16,316.25
24. Supply, transporting to site, installation, testing and commissioning of Single Phase Pump (0.5 HP) 01 Set 5,800.00 5,800.00
for pumping the water from the storage tank to the expansion tank with level controller and auto
on / off.
25. Sheet Metal Ducting
Supply, transport to site, fabricate & erect ducting made out of Galvanized Steel Sheet complete
with elbows, turning vanes, volume control duct dampers, neoprene gaskets galvanized supports
hangers etc. (SUPPLY& RETURN DUCT) of following sizes:-
(a) 22 Gauge 150 Sq.M 1,800.00 270,000.00
(b) 24 Gauge 200 Sq.M 1,200.00 240,000.00
26. Supply and installation of Aluminum powder coated Louvers with bird screen, adjustable damper for 01 Sq.M 5,800.00 5,800.00
fresh air complete all as required.
27. Acoustic Insulation
(a) Supply and Fixing of Duct inside Acoustic insulation with 20mm (with 48 Kg/Cum density) open cell 75 Sq.M 1,200.00 90,000.00
nitrile rubber.
28. Duct Thermal Insulation
Supply, Installation & Commissioning of Thermal insulation on the Sheet Metal Duct with Factory 275 Sq.M 1,100.00 302,500.00
Pasted Aluminium Foil Faced Fire retardent 19 mm thick Closed Cell Nitrile Rubber Insulation with
necessery Adhesive. The External duct will be finished with 26G Aluminium Cladding.

29. Motorised Fire Damper

Supply and installation of Motorised, fusible link type Fire Dampers including with fusible link , actuator 06 Sq.M 23,000.00 138,000.00
& control panel to close the damper by melting the fusible link when the temperature exceeds 50°C in
the supply air and return air path. The damper shall be motorized and spring return type so as to close
the damper in the event of power failure automatically and open the same in case of power being
restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper
shall also be closed in the event of fire signal complete as required and as per specifications.

30. VOLUME CONTROL DAMPERS

Supply, Installation & Commissioning of GI volume control duct damper complete with neoprene 01 Lot 70,000.00 70,000.00
rubber gaskets, nuts,bolts, screws linkages, flanges etc.
31. GRILLES /DIFFUSERS
Supply and installation of square / rectangular diffusers extruded aluminum removable core type with
or without aluminum volume control dampers.
(a) Supply air diffuser with VCD 09 Sq.M 16,000.00 136,000.00
(b) Return air diffuser without VCD 11 Sq.M 12,000.00 126,000.00

32. ELECTRICAL EQUIPMENT

(a) Supply, transporting to site, installation, testing and commissioning of floor mounted cubicle type 01 Nos 920,000.00 920,000.00
compartmentalized dust & vermin proof electrical panel/MCC panel (for central air coinditioning
system) made of 14 guage CRCA sheet structure duly painted with seven tank painting process, base
channel, complete with moulded case circuit breakers, MCBs, SFUs, meters, indicating lamps, current
transformer etc. complete in all respects, insulated bus bars with heat shrinkable PVC sleeves in
suitable bus chambers, interconnection, copper control wiring, name plate, danger plate, earth bus
etc. & comprising of compartments with hinged door for each feeder & its accessories, cable alley with
hinged doors, bus chamber with bolted door etc as detailed below:-

Incoming :-
Main MCCB incomer of 600Amp, 4P, 50kA and 800 Amps rated busbar with CT coil, digital volt meter,
digital ampere meter, indicator lamp and digital energy (kwh) meter.

Page 4 of 7
 SURABHI ENTERPRISE
GNB ROAD AMBARI
GUWAHATI 781001
PHONE NO 09854051290
Out Going
(i) Outgoing feeder (for CHILLERS) MCCB TPN 125 Amps, 36kA with digital voltmeter & ampere meter
including CT coils- 3 Nos
(ii) Outgoing feeder (for AIR HANDILING UNIT) with MCB TPN 63 Amp, 36kA, SFU with ammeter, DOL
Starter with over load relay, single phase protector 63 Amps, C.T Coil , Ammeter & Voltmetre -02 Nos

(iii) Outgoing feeder (for HOT WATER GENERATOR) with MCCB TPN,100 Amp, 36kA with digital
voltmeter, ampere meter with C.T Coil etc - 02 Nos
(iv) Outgoing feeder (for CONDENSOR WATER PUMPS) with MCB TPN 32 Amps, SFU with ammeter, DOL
Starter with over load relay, single phase protector 32 Amps, C.T Coil , Ammeter, Voltmetre etc -03 Nos

(v) Outgoing feeder (for CHILLED WATER PUMPS) with MCB TPN 32 Amps, SFU with ammeter, DOL
Starter with over load relay, cutter protector 32 Amps, C.T Coil, Ammeter, Voltmetre etc -03 Nos

(vi) Outgoing feeder (for COOLING TOWER) with MCB TPN 25 Amps, SFU with ammeter, DOL Starter
with over load relay, single phase protector 25 Amps, C.T Coil, Ammeter, Voltmetre etc -03 Nos

(vii) Outgoing feeder (for HOT WATER GENERATOR PUMPS) with MCB TPN 25 Amps, SFU with ammeter,
DOL Starter with over load relay, single phase protector 25 Amps, C.T Coil, Ammeter, Voltmetre etc -03
Nos
(viii) Outgoing feeder (for the MAKEUP WATER PUMP) with MCB DP 16 Amp, 'D' curve- 01 No

(b) Control wiring with 7 Core x 2.5 Sq.mm copper conductor cable 80 RMT 850.00 68,000.00
(c) Earthing with 8 SWG copper conductor 60 RMT 380.00 22,800.00
(d) PVC armoured aluminium conductor of size 150 sqmm, 3.5 core. 60 Sq.M 2,200.00 132,000.00
(e) PVC armoured aluminium conductor of size 100 sqmm, 3.5 core. 40 Sq.M 1,880.00 75,200.00
(f) PVC armoured aluminium conductor of size 50 sqmm, 3.5 core. 60 Sq.M 780.00 46,800.00
(g) PVC armoured aluminium conductor of size 35 sqmm, 3.5 core. 90 Sq.M 680.00 61,200.00
(h) PVC armoured aluminium conductor of size 25 sqmm, 4 core. 90 Sq.M 595.00 53,550.00
(j) PVC armoured aluminium conductor of size 16 sqmm, 4 core. 20 Sq.M 380.00 7,600.00

33. Temperature and RH sensor and adjuster package.

Supply, Installation, Testing and Commissioning of micro-processor based room temperature, humidity 01 Set 4,900.00 4,900.00
sensor and remote adjuster package fixed in wall mounted MS housing having stainless steel cover
plate. This package shall monitor and adjust the temperature and humidity characters for operation
rooms.
34. BUILDING MANAGEMENT SYSTEM
(a) Portable Operator Terminal 01 Set 280,000.00 280,000.00

(b) Graphical Display Software 01 Set 475,000.00 475,000.00

(c) System interface unit 01 Set 888,000.00 888,000.00

(d) DDC Controllers

(i) CHILLER Controller 01 Set 1,265,000.00 1,265,000.00
(ii) AHU's Controller 01 Set 285,000.00 285,000.00

(e) Field Devices

(i) Outside air temperature & Rh sensor 01 No. 95,000.00 95,000.00
(ii) Immersion temperature sensor [CHW temperatures] 03 Nos. 5,800.00 17,400.00
(iii) Duct type temperature sensor 02 Nos. 12,000.00 24,000.00
(iv) DP Switch to monitor fan on/off status 02 Nos. 18,000.00 36,000.00
(v) DP Switch to monitor filter status 02 Nos. 22,000.00 44,000.00
(vi) DP sensor across Supply and Return Header 01 Nos. 32,000.00 32,000.00

(f) Valve & Actuators

(i) 2 way modulating valve 100mm dia for Bypass Line 01 Nos. 4,800.00 4,800.00
(ii) 80mm 2 way modulating valve for AHU 02 Nos. 88,000.00 176,000.00
(iii) Butterfly Valve 100mm dia with on/off actuator with position feedback 02 Nos. 88,800.00 177,600.00

Page 5 of 7
 SURABHI ENTERPRISE
GNB ROAD AMBARI
GUWAHATI 781001
PHONE NO 09854051290
(g) Cables and conduits
(i) 2 core cable 1.0 sq.mm multistandard unscreened PVC cable 400 RMT 140.00 56,000.00
(ii) 2 core cable 1.0 sq.mm multistandard screened PVC cable 300 RMT 280.00 84,000.00
(iii) MS Conduit, 25mm (1") dia. 700 RMT 180.00 126,000.00
TOTAL Rs. 10,143,222.25
GST @18% ie Rs. 1,825,780.01
TOTAL OF LOW SIDE Rs. 11,969,002.26

Grand Total PROJECT COST Rs. 22,654,821.14

GENERAL NOTES:
1. SCAFFOLDING WHEREVER REQUIRED TO BE PROVIDED BY CLIENT.
2. ELECTRICAL POWER WILL BE IN CLIENT'S SCOPE.
3. CIVIL STRUCTURE WORK IS EXCLUDED OUR SCOPE OF WORK.
4. TRANSPORTATION IS INCLUDED IN OUR SCOPE OF WORK.
5. GST IS INCLUDING IN OUR B.O.Q.

WITH WARM REGARDS

SURABHI ENTERPRISE

PROBIN ROY

9854051290

Page 6 of 7
 SURABHI ENTERPRISE
GNB ROAD AMBARI
GUWAHATI 781001
PHONE NO 09854051290
LIST OF ACCEPTABLE MAKES OF EQUIPMENTS / MATERIALS
S.No. Description Makes/Manufacturer
1 CHILLER System: DAIKIN / Blue Star/VOLTAS /
2 AHU FOR INDOOR DAIKIN/Edgetech/Zeco
3 INDOOR FOR VRF/VRV TFA VTS/Edgetech/Zeco
4 ERV DRI
5 Screw chiller Climaveneta/York/Trane
6 Pumps MOTORS KSB /COMPRTON /SIMENS
7 AHU/FCU/HI-WALL VTS/Edgetech/Zeco
8 Valves Zoloto/Autco/Honeywel
9 VFD Danfoss/Johnson Controls
10 DP Sensor Honeywell /Johnson Controls
11 Temperaure guage Feebig/H Guru
12 Rotary Switch L & T/GE power control
13 Pressure guage Feebig/H Guru
14 Fans Section Kruger/Systemair /Nicotra
15 Ventilation Fans: Kruger/Systemair /Nicotra
16 i) Centrifugal Fan Kruger/Systemair /Nicotra
17 ii) Fan Section VTS/Edgetech/Zeco
18 iii) Vane Axial Kruger/Systemair /Nicotra
19 iv) Tube Axial Kruger/Systemair /Nicotra
20 v) Inline Kruger/Systemair /Nicotra
21 vi) Roof Extractor Kruger/Systemair /Nicotra
22 vii) Propeller Kruger/Systemair /Nicotra
23 NRV Zoloto/Autco/Honeywel
24 Electric Motor ABB / Siemens / Bharat Bijli/CROMPTON
25 Isolators Resistoflex / Kanwal/ ABB
26 M S PIPE Sail/Tata/Jindal
27 UPVC pipe Supreme / Ajay/Astral/Ashirvad
28 PVC pipe Supreme / Ajay/Astral/Ashirvad
29 G.I. Sheets Sail / Tata / Jindal
30 HOT WATER GENERATOR Emerald/Rapid Cool/ Khokhar Electrical
31 Al. Sheets Hindalco
32 Volume control damper Systemair / Carryair/Pine Air/ultimate
33 Fire Dampers Systemair / Carryair/Pine Air/ultimate
34 Duct Damper Systemair / Carryair/Pine Air/ultimate
35 All Grille will be15 degree uless specified /Diffusers Systemair / Carryair/Pine Air/ultimate
36 Fresh Air Louvers outdoor 45 degree Systemair / Carryair/Pine Air/ultimate
37 Closed Cell nitrile rubber Insulation Armacell / K-Flex / Supreme
38 Filters Spectrum/ Thermodyne / Anfilco / Mechmark
39 Dash Fastener Canon/Canco/Hilti /Fisher
40 MCB Schneider/ Legrand/ L&T /Hager/ABB
41 MCCB Schneider/ Legrand/ L&T /Hager/ABB
42 ACB Schneider/ Legrand/ L&T /Hager/ABB
43 MV Contactors/Timer/ Starters L&T/ Siemens/ABB
44 Protective Relays Schneider/L&T/ABB
45 All Meters(Ammeter,voltmater) Enercon/Neptune/Enersol/El Measure/L&T
46 Indication Lamps/Push Button L&T/ Schneider/ BCH
47 CT/PT Kappa/AE/Powermat
48 Terminal Blocks Elmex/Wago/Connect-Well
49 Selector Switch Kacee/L&T/BCH/Areva
50 Bus bar Jindal/ Indalco/ Century
51 LT Cables / Control Cables Skytone/KEI/ Gloster/Gemscab
52 Conduits BEC/AKG/Astral/Supreme
53 Cable Tray UNIVERSAL/Lergrand
54 Cable Gland Stripwell/ Commet/HMI
55 MV Panels Advance/ Tricolite/ Adlec/Sterling&Wilson
56 Control Wiring /Cable RR KAble/ Polycab/Gloster
57 Cooling Tower Paharpur
58 BMS SYSTEM Siemens/L&T/Honeywell

Page 7 of 7
 LIST OF ACCEPTABLE MAKES OF EQUIPMENTS / MATERIALS

S.No. Description Makes/Manufacturer

1 CHILLER System: DAIKIN / Blue Star/VOLTAS /
2 AHU FOR INDOOR DAIKIN/Edgetech/Zeco
3 INDOOR FOR VRF/VRV TFA VTS/Edgetech/Zeco
4 ERV DRI
5 Screw chiller Climaveneta/York/Trane
6 Pumps MOTORS KSB /COMPRTON /SIMENS
7 AHU/FCU/HI-WALL VTS/Edgetech/Zeco
8 Valves Zoloto/Autco/Honeywel
9 VFD Danfoss/Johnson Controls
10 DP Sensor Honeywell /Johnson Controls
11 Temperaure guage Feebig/H Guru
12 Rotary Switch L & T/GE power control
13 Pressure guage Feebig/H Guru
14 Fans Section Kruger/Systemair /Nicotra
15 Ventilation Fans: Kruger/Systemair /Nicotra
16 i) Centrifugal Fan Kruger/Systemair /Nicotra
17 ii) Fan Section VTS/Edgetech/Zeco
18 iii) Vane Axial Kruger/Systemair /Nicotra
19 iv) Tube Axial Kruger/Systemair /Nicotra
20 v) Inline Kruger/Systemair /Nicotra
21 vi) Roof Extractor Kruger/Systemair /Nicotra
22 vii) Propeller Kruger/Systemair /Nicotra
23 NRV Zoloto/Autco/Honeywel
24 Electric Motor ABB / Siemens / Bharat Bijli/CROMPTON
25 Isolators Resistoflex / Kanwal/ ABB
26 M S PIPE Sail/Tata/Jindal
27 UPVC pipe Supreme / Ajay/Astral/Ashirvad
28 PVC pipe Supreme / Ajay/Astral/Ashirvad
29 G.I. Sheets Sail / Tata / Jindal
30 HOT WATER GENERATOR Emerald/Rapid Cool/ Khokhar Electrical
31 Al. Sheets Hindalco
32 Volume control damper Systemair / Carryair/Pine Air/ultimate
33 Fire Dampers Systemair / Carryair/Pine Air/ultimate
34 Duct Damper Systemair / Carryair/Pine Air/ultimate
35 All Grille will be15 degree uless Systemair / Carryair/Pine Air/ultimate
36 specified
Fresh Air /Diffusers
Louvers outdoor 45 degree Systemair / Carryair/Pine Air/ultimate
37 Closed Cell nitrile rubber Insulation Armacell / K-Flex / Supreme
38 Filters Spectrum/ Thermodyne / Anfilco / Mechmark
39 Dash Fastener Canon/Canco/Hilti /Fisher
40 MCB Schneider/ Legrand/ L&T /Hager/ABB
41 MCCB Schneider/ Legrand/ L&T /Hager/ABB
42 ACB Schneider/ Legrand/ L&T /Hager/ABB
43 MV Contactors/Timer/ Starters L&T/ Siemens/ABB
44 Protective Relays Schneider/L&T/ABB
45 All Meters(Ammeter,voltmater) Enercon/Neptune/Enersol/El Measure/L&T
46 Indication Lamps/Push Button L&T/ Schneider/ BCH
47 CT/PT Kappa/AE/Powermat
48 Terminal Blocks Elmex/Wago/Connect-Well
49 Selector Switch Kacee/L&T/BCH/Areva
50 Bus bar Jindal/ Indalco/ Century
51 LT Cables / Control Cables Skytone/KEI/ Gloster/Gemscab
52 Conduits BEC/AKG/Astral/Supreme
53 Cable Tray UNIVERSAL/Lergrand
54 Cable Gland Stripwell/ Commet/HMI
55 MV Panels Advance/ Tricolite/ Adlec/Sterling&Wilson
56 Control Wiring /Cable RR KAble/ Polycab/Gloster
57 Cooling Tower Paharpur
58 BMS SYSTEM Siemens/L&T/Honeywell