LITKEN HD (RANGE)

HIGH PERFORMANCE LITHIUM GREASES

DESCRIPTION
PROPERTIES
Greases made with high quality and purity
mineral base oil, lithium soap, and additives for - High adherence and sealant capacity thus
improving its performance. protecting mechanical components from
external contaminants and extending
lubrication intervals.
APPLICATIONS - High load carrying capacity with minimum
wear.
Lubrication of bearings, rolling bearings, spindles
and slide ways in equipment subject to high loads - Its excellent behaviour in front of mechanical
in areas with presence of water, dust and other work allows it to maintain its consistency and,
contaminants: so, it can remain in the lubrication point, thus
increasing its reliability.
 Mining and Civil works - High resistance to aging, avoiding grease
 Food and beverage (points without possible degradation in service even for long
incidental contact). lubrication intervals.
 Steel industry
- High anti-rust protection of metallic parts.
 Textile
 Paper and paperboard - Good resistance to wash out by water.
 Waste disposal plants, harbour installations, - Working temperature range from –20 to
nautical equipment, etc. +140ºC.

QUALITY LEVEL:
- ISO-L-XBDHB 1 - ISO-L-XBDHB 2

TECHNICAL CHARACTERISTICS
Method Typical values Units
LITKEN HD 1 2
Appearance - Brown grease -
Penetration at 25°C ASTM D-217 324 284 mm x 10-1
Base oil viscosity ASTM D-445 220 mm x 10-1
NLGI consistency ASTM D 217 1 2 -
Dropping point ASTM D-566 200 °C
Welding load – 4 ball test ASTM D-2596 400 Kg
Wear scar 4 balls 400 N, 75 ºC, 1 hour ASTM D 2266 0,50 mm
Bearing corrosion ASTM D 1743 1-1-1 (without oxide) -
Copper corrosion 24h/100ºC ASTM D 130 1b grade
Oil separation (30 h. 100 ºC) ASTM D 6184 3,5 3 %
REV: 07/20
The information provided in this document is based upon our best knowledge at the date of revision indicate, and is subject to changes without prior notice. Such
information does not release the user from testing the product in their own application. The data indicated represent average values and do not constitute product
specifications. For more information please contact COGELSA Technical Support. COGELSA is not liable for damages caused by improper use of the product.

COMPAÑIA GENERAL DE LUBRICANTES, S.A. Export:

C/ Comercio, 36 P.I. Can Sunyer Telf. +34 93 635 60 50
08740 Sant Andreu de la Barca, Barcelona, Spain [email protected]
Telf. +34 93 682 22 20 Fax. +34 93 682 00 55
[email protected] www.cogelsa.com