Scribd
Upload
15 views5 pages

Finite Element Analysis

Uploaded by

Thapelo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
15 views5 pages

Finite Element Analysis

Uploaded by

Thapelo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Finite Element Analysis (FEA) is a numerical method used for solving complex structural, thermal,

fluid, and other engineering problems. Here are some common examples of FEA problems and how
they might be set up and analyzed.

### Example 1: 1D Truss Analysis

#### Problem
Analyze a 1D truss structure under a given load to determine the axial forces in each member.

#### Setup
- **Structure**: A truss with two nodes and one member connecting them.
- **Material Properties**: Young’s modulus \(E\), cross-sectional area \(A\).
- **Loads**: Applied force \(F\) at one of the nodes.
- **Boundary Conditions**: One node is fixed, and the other node is subjected to the load.

#### Steps

1. **Define the Element Stiffness Matrix**:


For a truss element, the stiffness matrix \(\mathbf{k}_{\text{e}}\) is:
\[
\mathbf{k}_{\text{e}} = \frac{EA}{L} \begin{bmatrix}
1 & -1 \\
-1 & 1
\end{bmatrix}
\]
where \(L\) is the length of the truss element.

2. **Assemble the Global Stiffness Matrix**:


Combine the local stiffness matrices of the truss elements into a global stiffness matrix.

3. **Apply Boundary Conditions**:


Modify the global stiffness matrix and force vector to account for fixed supports (e.g., set
displacement components to zero).
4. **Solve for Nodal Displacements**:
Use the equation \(\mathbf{K} \mathbf{d} = \mathbf{F}\) to solve for the displacements \(\
mathbf{d}\).

5. **Compute Internal Forces**:


Calculate internal forces in the truss members using:
\[
\mathbf{F}_{\text{element}} = \mathbf{k}_{\text{e}} \mathbf{d}_{\text{element}}
\]

### Example 2: 2D Beam Analysis

#### Problem
Analyze a simply supported beam subjected to a uniform load.

#### Setup
- **Structure**: A beam of length \(L\) with a uniform load \(w\) per unit length.
- **Material Properties**: Young’s modulus \(E\) and moment of inertia \(I\).
- **Boundary Conditions**: Simply supported at both ends.

#### Steps

1. **Define the Element Stiffness Matrix**:


For a beam element, the stiffness matrix \(\mathbf{k}_{\text{e}}\) in 2D can be written as:
\[
\mathbf{k}_{\text{e}} = \frac{EI}{L^3} \begin{bmatrix}
12 & 6L & -12 & 6L \\
6L & 4L^2 & -6L & 2L^2 \\
-12 & -6L & 12 & -6L \\
6L & 2L^2 & -6L & 4L^2
\end{bmatrix}
\]
2. **Assemble the Global Stiffness Matrix**:
Combine local stiffness matrices into the global matrix.

3. **Apply Boundary Conditions**:


Modify the global matrix to account for the constraints at the supports.

4. **Solve for Nodal Displacements**:


Use the global stiffness matrix to solve for displacements.

5. **Calculate Reactions and Internal Forces**:


Determine the reactions at the supports and internal bending moments and shear forces.

### Example 3: 3D Heat Transfer Analysis

#### Problem
Analyze steady-state heat conduction in a 3D solid with given boundary conditions.

#### Setup
- **Geometry**: A cubic block with thermal conductivity \(k\).
- **Boundary Conditions**: Fixed temperatures or heat fluxes on the surfaces.

#### Steps

1. **Define the Element Stiffness Matrix**:


For a 3D solid element, the stiffness matrix involves the thermal conductivity and the geometry of
the element.

2. **Assemble the Global Stiffness Matrix**:


Combine the local stiffness matrices into the global matrix.

3. **Apply Boundary Conditions**:


Set temperatures or heat fluxes on the boundaries of the solid.
4. **Solve for Nodal Temperatures**:
Use the global matrix to solve for temperatures at the nodes.

5. **Compute Heat Fluxes**:


Calculate heat fluxes using the temperature gradients.

### Example 4: 2D Plane Stress Analysis

#### Problem
Analyze a 2D plate under a distributed load.

#### Setup
- **Structure**: A rectangular plate with a uniform load.
- **Material Properties**: Young’s modulus \(E\) and Poisson’s ratio \(\nu\).
- **Boundary Conditions**: Fixed edges or simply supported edges.

#### Steps

1. **Define the Element Stiffness Matrix**:


For a plane stress element, the stiffness matrix \(\mathbf{k}_{\text{e}}\) can be expressed using:
\[
\mathbf{k}_{\text{e}} = \frac{t}{(1-\nu^2)} \begin{bmatrix}
E & \nu E & 0 \\
\nu E & E & 0 \\
0 & 0 & \frac{E}{2(1+\nu)}
\end{bmatrix}
\]
where \(t\) is the thickness of the plate.

2. **Assemble the Global Stiffness Matrix**:


Combine the element stiffness matrices into the global stiffness matrix.
3. **Apply Boundary Conditions**:
Modify the global matrix and force vector to account for the boundary conditions.

4. **Solve for Nodal Displacements**:


Solve the system of equations to find displacements at the nodes.

5. **Calculate Stress and Strain**:


Compute stress and strain in the plate using the displacements.

### Tools and Software

1. **MATLAB with PDE Toolbox**: For solving finite element problems using MATLAB.
2. **ANSYS**: Widely used for commercial FEA analysis.
3. **ABAQUS**: Another powerful tool for complex FEA problems.
4. **COMSOL Multiphysics**: Useful for multi-physics problems.

These examples cover a range of FEA applications from simple 1D trusses to complex 3D heat
transfer problems. They illustrate the general process of setting up, solving, and interpreting finite
element problems.

You might also like