JDN MONOCRANE
TROLLEYS
JDN MONOCRANE trolleys are available in motorised or push / pull variants and feature an adjustable width cross bolt system
and our SW series wheels.
JDN MONOCRANE SW Series wheels are manufactured in Ductile Iron, Grade 500-7(GGG-50), providing a balance between strength,
ductility and wear resistance. Featuring shielded ball bearings, machine cut teeth and a spherical tread profile which is compatible
with both parallel and tapered beam flanges.
BW = BEAM WIDTH
* NOTE : TOTAL CROSS BOLT LENGTH DOES
NOT CHANGE WITH BEAM WIDTH.
AS THE BEAM WIDTH DECREASES,
T1 INCREASES.
MOTORISED TROLLEYS
PART NO. T1 T2 T3 T4 T6 T7 T8 T9 T10 T11 T12 T13 TF
TROL_MO_080_20F 106 493 41 13 505 120.5 264 112.5 160 295 35 70 40
TROL_MO_125_20F 125 526 50 16 600 144 312 152.5 200 305 35 70 50
TROL_MO_160_20F 136 578.5 61 20 765 187.5 390 180 265 395 50 100 45
TROL_MO_200_20F 154 581.5 64 28 930 228 474 245 330 432.5 62.5 125 55
TROL_MO_250_20F 177 596 67 28 1090 267.5 555 310 395 502.5 62.5 125 65
PUSH TROLLEYS
PART NO. T1 T2 T3 T4 T6 T7 T8 T9 T10 T11 T12 T13 TF
TROL_PU_080_P 106 106 41 13 505 120.5 264 112.5 160 295 35 70 40
TROL_PU_125_P 125 125 50 16 600 144 312 152.5 200 305 35 70 50
TROL_PU_160_P 136 136 61 20 765 187.5 390 180 265 395 50 100 45
TROL_PU_200_P 154 154 64 28 930 228 474 245 330 432.5 62.5 125 55
TROL_PU_250_P 177 177 67 28 1090 267.5 555 310 395 502.5 62.5 125 65
* All dimensions in mm and subject to change without notice.
