12CXN88 8Ω
Coaxials - 12.0 Inches
1000 W continuous program power capacity
80° nominal coverage
50 - 18000 Hz response
100 dB sensitivity
Single Neodymium magnet assembly
Aluminium demodulating ring allows a very low
distortion figure
Double silicone spider with optimized
compliance
Continuing our never-ending quest for higher output, we now offer our popular single neodymium magnet c oaxials with larger voic e
c oils for inc reased power handling. A signific ant inc rease in magnet mass also improves sensitivity and c one c ontrol, while
integrating our latest c ompression driver tec hnologies improves sound quality and durability in the HF as well. For high output
applic ations where fidelity at maximum S PL is the primary c onc ern, c onsider the 12CXN88, with 3.5” LF and 3” HF voic e c oils.
Power handling has inc reased to 1000W, while also improving nearly every other parameter (inc luding Xvar) relative to our
established 3” c oil CXN76 series.
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
12CXN88
Coaxials- 12.0 Inc hes
SPECIFICATIONS SPECIFICATIONS LF UNIT SPECIFICATIONS HF UNIT
Nominal Diameter 320 mm (12.0 in) LF Sensitivity 2 100.0 dB HF Sensitivity 5 106.0 dB
Nominal Impedance 8Ω LF Nominal Power Handling3 500 W HF Nominal Power Handling6 80 W
Minimum Impedance LF 6.6 Ω LF Continuous Power Handling4 1000 W HF Continuous Power Handling7 160 W
Minimum Impedance HF 8.5 Ω LF Voice Coil Diameter 88 mm (3.5 in) HF Voice Coil Diameter 75 mm (3.0 in)
Frequency Range 50 - 18000 Hz LF Winding Material Aluminium HF Winding Material Aluminium
Dispersion Angle1 80 ° LF Flux Density 1.05 T HF Flux Density 1.75 T
Woofer Cone Treatment Former Material Glass Fibre Diaphragm Material Titanium
WP Waterproof Front Side
Winding Depth 21.5 mm (0.85 in) Recommended Crossover8 1.2 kHz
Magnet Material Neodymium Ring
Magnetic Gap Depth 11.0 mm (0.43 in) Inductance 0.14 mH
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
PARAMETERS MOUNTING AND SHIPPING INFO CROSSOVER
Resonance Frequency 50 Hz Overall Diameter 315 mm (12.4 in) FBCXN88 8Ω
Re 5.0 Ω Bolt Circle Diameter 298 mm (11.7 in)
Qes 0.23 Baffle Cutout Diameter 284 mm (11.18 in)
Qms 8.3 Depth 178 mm (7.01 in)
Qts 0.22 Flange and Gasket Thickness 13 mm (0.51 in)
Vas 59.0 dm 3 (2.08 ft3) Net Weight 6.0 kg (13.23 lb)
Sd 522.0 cm 2 (80.91 in2) Shipping Units 1
η₀ 3.6 % Shipping Weight 7.3 kg (16.09 lb)
Xmax ± 8.0 mm Shipping Box
425x425x224 mm (16.73x16.73x8.82 in)
Xvar ± 10.5 mm
Mms 60.0 g
Bl 20.9 Txm
Le 1.05 mH
EBP 217 Hz
SERVICE KIT
LF recone kit RCK12CXN888
MF replacement diaphragm MMD3DTN8M
1. Included by –6 dB down points.
2. Applied RMS Voltage is set to 2.83V.
3. 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
4. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
5. Applied RMS Voltage is set to 2.83V.
6. 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated
minimum impedance. Loudspeaker in free air.
7. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
8. 12 dB/oct. or higher slope high-pass filter.
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
