DB SERIES
MODEL DB8
DB8 PERFORMANCE 3450 RPM FEATURES &
0 2 4 6
FLOW (m3/hr)
8 10 12 14
CAPABILITIES
50
Curve Legend + Five-year warranty
#1 #1- 3.63" (92.2 mm) 14
45 + Extended run dry ability
#2- 3.38" (85.9 mm)
25%
0.50 Hp #3- 3.12" (79.2 mm) (with carbon bushing)
40 #2 55% #4- 2.88" (73.2 mm) 12
HEAD (m)
+ High operating efficiency
HEAD (ft)
60%
65%
35 + Polypropylene or PVDF
#3 10
30
construction
35% 45% + Powerful neodymium magnets
8
25
#4 + Close-coupled design
60%
20 6 + Threaded (NPT or BSP),
55%
flanged, or union connections
15 45%
NPSHr (m)
NPSHr (ft)
4 + Horizontal or vertical installation
10 NPSHr with IEC motor
0.33 Hp 2
5 + Back pullout design
0.25 Hp + Mounts to NEMA and
Min. Flow- 0.5 US gpm (1.9 lpm)
0 0
0 10 20 30 40 50 60 70
IEC (B5 & B14) motor frames
FLOW (gpm) + Easy set measurement free
drive
+ ISO 1940 G2.5 balancing
+ CE certified/ATEX available
DB8 PERFORMANCE 2900 RPM
+ Working pressure to 80 psi
16
Curve Legend (5.5 bar)
.37 kW #5- 106 mm (4.18")
#5
#6- 102 mm (4.00")
+ Specific gravity over 1.8
14
#7- 95 mm (3.75") + Viscosity up to 150 cP
HEAD (m)
#6 #8- 89 mm (3.50")
12 25% + Polypropylene—180o F (82o C)
60% .55 kW + PVDF—220o F (104o C)
#7 65%
10 35% 45%
#8
55%
APPLICATIONS
8
+ Chemical processing
+ Plating
6
+ Water and wastewater
55% + Electronics
NPSHr (m)
4
45% + Pharmaceuticals
.25 kW
2 + Wet scrubber
NPSHr + Pulp and paper
Min. Flow-1.9 lpm
0 + Heat exchanger
0 3 6 9 12 15 18 + and many more!
FLOW (m3/hr)
FINISH THOMPSON PUMPING SOLUTIONS AROUND THE WORLD finishthompson.com
DB SERIES
Specifications
Description Polypropylene PVDF
1 Impeller housing Glass-fiber reinforced Carbon-fiber reinforced
polypropylene (GF PP) PVDF (CF PVDF)
1A Impeller housing High purity alumina ceramic or silicon carbide (SiC)
thrust ring
2 O-ring FKM, EPDM, Simriz®, or Kalrez
3 Impeller GF PP CF PVDF
3A Impeller thrust ring GF molybdenum disulfide filled PTFE, or SiC
4 Inner drive Neodymium iron boron Neodymium iron boron
magnets encapsulated magnets encapsulated
in unfilled polypropylene in unfilled PVDF
5 Bushing Carbon, PTFE, high purity alumina ceramic, or SiC
6 Shaft High purity alumina ceramic, Hastelloy® C, or SiC
7 Barrier GF PP CF PVDF
7A Barrier thrust ring Silicon carbide
8 Clamp ring Ductile iron
9 Motor adapter GF PP
10 Outer drive magnets Nickel-plated neodymium iron boron magnets/ Kalrez® is a registered trademark of DuPont Performance Elastomers
steel Simriz® Perfluoroelastomer is a registered trademark of the Simrit®
division of Freudenberg-NOK
11A Motor adapter Buna N Hastelloy® C is a registered trademark of Haynes International, Inc.
11B sealing kit (NEMA only)
11C
Dimensions B
†
1 1 A
F 7 1/32"
1" MNPT G 2 11/32" (17.9 cm)
2 1/2"
(6.4 cm) or MBSP 1 (6.0 cm)
H
4 15/16" C
(12.5 cm) 1-1/2" FNPT
D or FBSP
3-3/8"
(8.6 cm)
1Dimensions for F, G, and H can be found in the
Also available 1-1/2” x 1” 150 lb. ANSI/ISO PN20/PN40/JIS 10K
7 1/2" Outline Dimensions booklet in the Resources
or 50mm x 32mm union connection. Flanges are in compliance
(19.1 cm)
with bolting dimensions only. section of www.finishthompson.com.
Motor Frame A B† C D E lbs. [kg] PP lbs. [kg] PVDF
NEMA 56C 7-3/32” [18.0 cm] 17-11/32” [44.1 cm] 2-7/16” [6.2 cm] 4-7/8” [12.4 cm] 3-1/2” [8.9 cm] 10.5 [4.8] 11.1 [5.0]
NEMA 145TC 7-3/32” [18.0 cm] 17-27/32” [45.3 cm] 2-3/4” [7.0 cm] 5-1/2” [14.0 cm] 3-1/2” [8.9 cm] 10.5 [4.8] 11.1 [5.0]
IEC 63 w/B14 or B5 7-17/32” [19.1 cm] 14-25/32” [37.5 cm] 1-31/32” [5.0 cm] 3-15/16” [10.0 cm] 2-15/32” [6.3 cm] 14.0 [6.4] 15.0 [6.8]
IEC 71 w/B14 or B5 7-17/32” [19.1 cm] 15-23/32” [39.9 cm] 2-7/32” [5.6 cm] 4-13/32” [11.2 cm] 2-25/32” [7.1 cm] 14.0 [6.4] 15.0 [6.8]
IEC 80 w/B14 or B5 7-23/32” [19.6 cm] 17-7/32” [43.7 cm] 2-15/32” [6.3 cm] 4-29/32” [ 12.5 cm] 3-5/32” [ 8.0 cm] 11.0 [5.0] 12.0 [5.4]
Dimensions and weights are for reference only. Weights listed are for pump only; motor not included.
†Varies with motor manufacturer.
FINISH THOMPSON INC. - HEADQUARTERS FINISH THOMPSON INC. - EUROPE CENTER
921 Greengarden Road | Erie, PA 16501 Otto-Hahn-Strasse 16 | Maintal, D-63477 Germany
800.934.9384 | ph 814.455.4478 | fx 814.455.8518 49 (0)6181-90878-0 | fx 49 (0)6181-90878-18
finishthompson.com email
[email protected] email
[email protected]
