Technical Data Sheet
Previous Name: Shell Tonna T
Shell Tonna S2 M 220 • Extra Separation from Coolants
Machine tool slideway oils
Shell Tonna S2 M oils are specially designed for the lubrication of machine tool slides, tables and feed
mechanisms. Their enhanced tackiness and stick-slip characteristics combine to offer superior frictional
performance on slideways. They are specially recommended in cases where high exposure to soluble cutting
fluids exist.
Performance, Features & Benefits Main Applications
· Ready separation from water-miscible cutting fluids
Separates completely and immediately from water-miscible
metalworking fluids allowing easy removal by skimming.
This helps to achieve longer coolant life, better cutting
performance and to reduce Health & Safety issues.
· Machine tool slideways, tables and feed mechanisms
Developed for use on a wide range of materials used for
· Good slideway adhesion
Provides very effective adhesion to slideway surfaces,
machine tool slideway surfaces, including cast iron and
synthetic materials.
resisting wash-off by metalworking fluids and thus reducing Shell Tonna S2 M oils can be used also in the hydraulic and
oil consumption and giving more uniform working condition gearboxes system although in such applications Shell Tonna
for the machine. S3 M oils are generally preferable.
· Good frictional properties
“Stick-slip” problems are overcome allowing more accurate
The lower viscosity grades are intended for horizontal slide
lubrication (Shell Tonna S2 M 32 or 68). For vertical slides
positioning. This provides benefits of improved finished use Shell Tonna S2 M 220.
surface quality and dimensional accuracy of work pieces.
· Good anti-wear performance
Provides anti-wear protection for slideways, gears,
Specifications, Approvals & Recommendations
· Fives Cincinnati P-50 (ISO 220), P-47 (ISO 68), P-53 (ISO
32)
bearings and hydraulic system components.
· Excellent corrosion prevention characteristics · ISO 19378 / ISO 6743-13 GA and GB DIN CGLP
Provides effective prevention of machine tool surfaces and · CGLP Slideway Oils against DIN 51502
components in the presence of water-miscible cutting For a full listing of equipment approvals and
fluids. recommendations, please consult your local Shell Technical
Helpdesk.
Typical Physical Characteristics
Properties Method Shell Tonna S2 M 220
ISO Viscosity Grade ISO 3448 220
Kinematic Viscosity @400C mm2/s ISO 3104 220
Kinematic Viscosity @100 C 0
mm /s 2 ISO 3104 19.1
Viscosity Index ISO 2909 98
Density @15 C0
kg/m 3 ISO 12185 894
Flash Point (Cleveland Open Cup) 0
C ISO 2592 250
Page 1 of 2 Shell Tonna S2 M 220, v 1.2 01.07.2015.04.43
Properties Method Shell Tonna S2 M 220
Pour Point 0
C ISO 3016 -15
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
· Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2 Shell Tonna S2 M 220, v 1.2 01.07.2015.04.43
