9000M2 SERIES

MODULAR DIGITAL MATRIX MIXER

AND MIXER/AMPLIFIERS

9000M2 Series with Unparalleled Versatility—

ideal for multi-zone paging, music distribution
and room-combining applications.
 The TOA 9000M2 Series Digital Matrix Mixer/Amplifiers redefines the
conventional mixer/amplifier category by combining a modular matrix
mixer, digital signal processor (DSP) and amplifiers in a compact, two
rack space package. The versatile new series is ideal for multi-zone
paging, music distribution and room-combining applications. The
9000M2 Series models include dual and single channel amplifiers with
high or low impedance outputs plus a matrix mixer-only version.
All models allow for easily configured, custom systems with up to eight
mic/line inputs and eight outputs. Each 9000M2 Series chassis has two
output channels with built-in DSP, including ; ten band parametric EQ,
compressor, deley and more. Input and output modules include
additional DSP.
A new integrated operating mode provides powerful functionality for
both simple mixing and complex multi-zone paging applications.
Features include telephone zone paging, automatic microphone mixing
and ambient noise control.

9000M2 SERIES AMPLIFIER

■ Modular digital matrix mixer/amplifiers for a multitude of applications

including audio-visual, zone paging, room combining and many more.
■ Enhanced GUI programming interface for PC configuration and
uploading/downloading of settings using RS-232 connection. Includes setup
wizards and firmware upgrade utility.
■ Exceptional Audio Quality:
• 24-bit, 48 kHz sampling • Ultra-Low Distortion – 0.0008%
■ Dual Channel Digital Signal Processor (DSP) on Input & Output channels:
• 10-Band Parametric EQ • High and Low Pass Filters • Bass and Treble
• Loudness • Compressor • Gate • Ducker • NOM (Automix)
• Delay (Output channel only) • TOA Speaker EQ Presets (Output channel only)
• DSP included on 9000 Mainframe Outputs, D-001T, D-001R and T-001T modules
■ Single or Dual Channel Power Amplifiers – 70.7V, 25V wide range of power ratings
■ Flexible Output Power – dual channel models allow up to 50% of either amplifier
channel to be allocated to the other channel
(A-9060DHM2 and A-9120DHM2) (Ex. A-9060DHM2: CH1; 90W, CH2; 30W)
■ Flexible, Integrated Operating System (Mixer + Paging Matrix):
• Mixer functions along with simultaneous Priority Paging Matrix activation, each
with 32 presets.
• Scene memory (x32) contains all mixer (non-priority) settings
• Paging memory (x32) contains global (static) input settings, independent Xpoint
assignments, paging trigger & paging output levels for all high priority (1, 2 & 3) inputs.
• Both scene & paging memories are stored in a single template along with remote
assignments, security lock and other global functions
• Mixer & Paging functions are independent and mixer (scene) settings will not affect
Paging (event) functions.
 Dining Area

Patio

Waiting Area

Cashier
Kitchen

Bar

Model Power Amplifier Output(s) Digital Signal Processor Mic/Line Inputs Line Outputs
A-9060SM2 1 × 60W @ 25/70V, 4/8Ω 2 Channels Up to 8 (4 × D-001T) Up to 7 (1 built-in plus 3 × T-001T)
A-9120SM2 1 × 120W @ 25/70V, 4/8Ω 2 Channels Up to 8 (4 × D-001T) Up to 7 (1 built-in plus 3 × T-001T)
A-9240SHM2 1 × 240W @ 70V 2 Channels Up to 8 (4 × D-001T) Up to 7 (1 built-in plus 3 × T-001T)
A-9060DHM2 2 × 60W @ 70V 2 Channels Up to 8 (4 × D-001T) Up to 6 (3 × T-001T)
A-9120DHM2 2 × 120W @ 70V 2 Channels Up to 8 (4 × D-001T) Up to 6 (3 × T-001T)
M-9000M2 2 × Line Level 2 Channels Up to 8 (4 × D-001T) Up to 8 (2 built-in plus 3 × T-001T)

Features
■ Multiple Input Priority Modes sets priority order when multiple inputs with ■ Alphanumeric Input/Output Channel and Memory Naming
the same priority level and output assignment are broadcast ■ Two Remote Volume Control Terminals on mainframe
• First-In-First-Out (FIFO): input that occurs first is broadcast
■ Four Control Inputs – programmable to activate Paging/Scene
• Last-In-First-Out (LIFO): the most recent input is broadcast
Memory, Volume Up/Down (Input or Output), Mute (Input or Output),
• MIX: all inputs are simultaneously mixed and broadcast
Power On/Off, Emergency Mute, Sync On/Off (expandable to twelve
■ Voice Operated (VOX) paging activation with adjustable with C-001T module). Works with optional ZM-9003 or custom contact
threshold/sensitivity and gate release time panel
■ Stereo Link – Mirrors all the settings of one channel to the adjacent ■ Four Control Outputs (open collector) programmable to activate
channel, reducing redundant setup tasks for stereo signals external relays (expandable to twelve with C-001T module)
■ Speaker Line Switching – select up to four speaker lines from a single synchronized with Event/Scene Memory, Channel On/Off (Input or
amplifier output using optional model SS-9001 Speaker Selector and Output) and Power On/Off. Works with optional ZM-9003 or custom
AD-246 Power Supply contact panel.
■ Mixer Out/Power Amp In Patching Loops (Except M-9000M2) for ■ RS-232C serial port
connection of external processor(s) • Allows upload & download of programming templates and firmware
upgrades as well as real-time control of various parameters.
■ Balanced Line Output(s) – two: M-9000M2, one: A-9060SM2,
• Control protocol available
A-9120SM2, A-9240SHM2; expandable with T-001T dual line
• AMX and Crestron control modules available
output modules
*AMX is a trademark of AMX Corporation
■ Keylock Security sets password-protected access to prevent access to *Crestron is a trademark of Crestron Electronics, Inc.
Input, Output, Utility & Power functions
9000M2 GUI
Detailed screens make even complex setting

Initial Setup Wizards

Module Configuration Settings
Displays possible selections according to module insertion rules,
ensuring correct system configuration.
Input & Output Channel Name Settings
The names set using these screens are carried over into subsequent
remote controller and paging configuration screens, streamlining the
setting process.

Paging Settings
Set 3-level prioritized paging for each activation trigger (up to 32)
To handle multiple simultaneous paging calls with the same priority
level, the system can be set for “FIFO” (first in, first out), “LIFO” (last in,
first out), or “MIX” (mixing). This allows paging settings to handle
situations requiring sophisticated priority orders, for example in mass
notification systems. It is also possible to make settings that cause a
contact to be closed with the initiation of each page, a feature that can
be used to illuminate a strobe, call up a CCTV camera’s preset
positions, or enable audio or video recording via external equipment.
Additionally, the optional S-20S module allows different messages to
be broadcast corresponding to individual triggered outputs.
gs intuitive and easy to understand

Remote Controller Settings

Easy pull-down menu facilitates complex settings!
The remote controller buttons can be used to switch scene
memory, turn output sources on or off, and control the start and
stop of paging. The output source on/off function includes
Simultaneous Mode, which allows simultaneous output from
multiple sources, and Exclusive Mode, which allows selection
of only one output source. Knobs on the remote controller adjust
the volume for the selected input-output channels.

EQ Settings
Select from 3 types: LPF, HPF and PEQ. Up to 12 filters can be
applied to each input-output channel
TOA's Speaker preset EQ is visible in graphic display
Use the Adjust button to change and check the effects of EQ settings on
the fly. Use the Enable check boxes to deactivate filters without erasing
their settings. Use the All Bypass button to disable all filters at once.
Using these in conjunction with the Adjust button allows EQ effects to be
compared efficiently.

Cross Point
Settings
Up to 32 preprogram-
med broadcast patterns
that switch according to
each scene can be
stored in the scene
memory.
MODULES
D-001T ZP-001T AN-001T
Dual Mic/Line Input Module Telephone Zone Paging Ambient Noise Controller
with DSP Module Module
■ Two Balanced Mic / Line Inputs ■ Telephone Paging to up to eight zones ■ Automatically adjusts output gain to
■ Digital Signal Processing ■ Uses DTMF dialing to access outputs compensate for changes in
• 10-Band Parametric EQ ■ Dial up to eight output zones in ambient noise level
• Bass / Treble one operation ■ Each input can be assigned to
• Loudness ■ Analog extension or page port compatible control a specific output
• High and Low Pass Filters ■ Two inputs with +24VDC phantom power for
■ Page port operation requires contact closure activation
• Compressor condenser mics
■ RJ-11 Telephone Jack and Removable Terminal Blocks
■ Adjustable Sensitivity (nine levels, -60 to -10 dBV) ■ 14 preset gain ratios
■ Maximum one per chassis
■ Phantom Power (24 VDC) ■ Accessory sensing microphone available, model AN-9001
■ Removable Terminal Block ■ Maximum two per chassis
■ Maximum four per chassis T-001T
■ Required for VOX function and input metering Dual Line Output Expansion C-001T
Module with DSP Input/Output Control Module
D-001R ■ Two Balanced Line Outputs
■ Eight assignable control inputs for
Line Input Module with DSP ■ Digital Signal Processing activating Event, Volume Up/Down,
•10-Band Parametric EQ
■ Two RCA phone inputs per channel Mute, Power On/Off, Emergency
•Bass / Treble Mute or Sync On/Off
provides stereo summing
•Loudness
■ Digital Signal Processing ■ Eight assignable control outputs for
•High and Low Pass Filters
•10-Band Parametric EQ activating external relays
•Compressor
•Bass / Treble •TOA speaker EQ presets ■ Removable Terminal Block
•Loudness
■ Removable Terminal Block ■ Maximum one per chassis
•High and Low Pass Filters
•Compressor ■ Maximum three per chassis
RC-001T
RS-485 Control Modules
■ Allows use of up o 16 RS-485 remote
control panels
■ Bi-directional RS-485 communication
provides control and status feedback
display for each remote function
■ Dual ports allows independent home
runs for up to 8 modules each
■ 24V DC power adapter (optional AD-246) required for
each 1 port used
■ May be used in any control option slot on 9000M2 frame in
addition to a C-001T when spare slots are available

ACCESSORIES
ZM-9001 ZM-9002 ZM-9003
Remote Panel Remote Panel Remote Panel
■ Six assignable buttons to activate preset ■ Four assignable buttons to activate preset ■ Works with contact inputs on 9000M2
selection or volume up/down selection or volume up/down mainframe and on C-001T
■ Operates on Remote Volume Control ■ Variable knob to control volume ■ Six buttons - 4 locking with label strips
terminal on the 9000M2 back panel ■ Operates on Remote Volume Control and two momentary buttons - may be
terminal on the 9000M2 back panel assigned to control program change,
volume up/down, channel on/mute, emergency mute, power
and paging prohibit function.

ZM-9011 ZM-9012 ZM-9013

Remote Control Panel Remote Control Panel Remote Control Panel
■ Four assignable buttons each with LED ■ Rotary Encoder can be assigned to control any ■ Eight assignable buttons each with
status indicator can control Xpoint settings input or output volume LED status indicator can control Xpoint
(on/off, select), paging activation, scene and ■ Multiple input or outputs may be “ganged” for settings (on/off, select), paging
relay activation Master volume terminals activation, scene and relay activation
■ Assignable ID rotary adjustment on box ■ Multi-segment LED indicator provides visual ■ Assignable ID rotary adjustment
volume level status on box

ZM-9014 AN-9001 SS-9001

Remote Control Panel
■ Four assignable buttons each with
Ambient Noise Speaker Selector
LED status indicator can control Sensing Microphone ■ Switch up to four speaker lines on one
Xpoint settings (on/off, select), paging ■ Ceiling or wall-mount condenser amplifier output
activation, scene and relay activation microphone ■ Two amplifier inputs for Paging/
■ Assignable ID rotary adjustment ■ Fits one gang electrical box BGM applications
on box ■ Use with AN-001T module ■ Wall-mount bracket included
■ Requires optional 24VDC power supply,
model AD-246
SPECIFICATIONS
Model No. A-9060DHM2 A-9120DHM2 A-9060SM2
Output Power 2 × 60W @ 70V 2 × 120W @ 70V 1 × 60W@25/70V, 4/8 ohms
Audio Input Max. 8 channels, modular construction (modules optional)
Power amplifier input 1, 2: 0dBV, 10kΩ, RCA pin jack
Audio Output Preamplifier output 1, 2: 0dBV, 300Ω, unbalanced, RCA pin jack Preamplifier output 1: 0dBV,
300Ω, unbalanced, RCA pin
jack; Preamplifier output 2:
0dBV, 600Ω, balanced,
removable terminal block (3pins)
Speaker output 1, 2: 60W, Speaker output 1, 2: 120W, Removable terminal block
70.7V line, 83Ω × 2, BTL 70.7V line, 41Ω × 2, BTL (7 pins); Direct: 60W, 4Ω,
output, removable terminal output, removable terminal unbalanced; Transformer:
block (4 pins) block (4 pins) 60W, 8Ω 25V and 70V, balanced
Power Bandwidth 20Hz – 20kHz, 0.008% THD Direct: 20Hz – 20kHz,
0.02% THD; Transformer:
50Hz – 20kHz, 0.5% THD
Frequency Response Power amplifier section: 20Hz – 20kHz, +0, -1dB
Analog input module to speaker output: 20Hz – 20kHz +1, -3dB
Total Harmonic Power amplifier section: 0.0008% (22kHz LPF, 1 kHz, 0.008% (22 kHz LPF, 1 kHz,
Distortion rated power) rated power)
Analog input module to speaker output: 0.008% 0.008% (22kHz LPF, 1 kHz,
(22kHz LPF, 1 kHz, rated power) rated power)
S/N Ratio At input short, 20Hz – 20kHz, ALL FLAT or OFF setting
Output volume min.: 90dB (preamplifier output)
Output volume max.: 61dB (preamplifier output, input 1 volume: 0dB, other inputs: OFF)
Power amplifier section: 110dB
Crosstalk 64dB or more at 20kHz
Tone Control Bass: +/-12dB (at 100Hz), Treble: +/-12dB (at 10kHz)
Parametric EQ 10 bands, Freq: 20Hz – 20kHz, 31 steps, Various range: +/- 12dB, Q: 0.3 – 5
Speaker Equalizer 30 (presets for TOA speakers)
High-pass Filter -12 dB/oct, Variable frequency range: 20Hz - 20kHz, 31 steps
Low-pass Filter -12dB/oct, Variable frequency range: 20Hz - 20kHz, 31 steps
Compressor Depth: 1 - 5
Delay 0 – 40ms (1 ms steps), maximum 40ms (CH1 + CH2)
Scene/Paging Memory 32/32
Auxiliary Function Key lock function
Control Input/Output RS-232C, D-sub connector (9P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: 1mA or less,
removable terminal block
Control output: 4 outputs, open collector output, withstand voltage: 27V DC, control current: 50mA, removable
terminal block
Remote volume: 2 channels, connect a 10kΩ/linear taper variable resister or 0 – 10V DC, removable terminal block
Power Source 120V AC, 60Hz
Power Consumption 150W 250W 100W
Operating Temperature 14° to 104° F (-10° to 40° C)
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: aluminum, hair-line, black; Case: surface-treated steel plate, black paint
Dimensions (W × H × D) 16.54" × 4.24" (3.5" w/out feet) × 15.55" (420 × 107.6 x 395mm) 16.54" × 4.24" (3.5" w/out feet) × 13.98"
(420 × 107.6 × 355mm)
Weight (without modules) 19.84 lbs. (9kg) 24.25 lbs. (11kg) 24.25 lbs. (11kg)
SPECIFICATIONS
Model No. A-9120SM2 A-9240SHM2 M-9000M2
Output Power 1 × 120W @ 25/70 V, 4/8 ohms 1 × 240W @ 70 V n/a
Audio Input Max. 8 channels, modular construction (modules optional) Max. 8 channels, modular construction
Power amplifier input: 0dBV, 10kΩ, RCA pin jack (modules optional)
Audio Output Preamplifier output 1: 0dBV, 300Ω, unbalanced, RCA pin jack Preamplifier output 1, 2: 0dBV, 600Ω,
Preamplifier output 2: 0dBV, 600Ω, balanced, removable terminal block (3 pins) balanced, removable terminal block (3 pins)
Speaker output: Removable terminal Speaker output: 240W, 21Ω, BTL
block (7 pins); Direct: 120W, 4Ω, output, removable terminal block
unbalanced; Transformer: 120W, 8Ω (4 pins)
25 V & 70 V, balanced
Power Bandwidth Direct: 20Hz – 20kHz, 0.02% THD 20Hz – 20kHz, 0.008% THD
Transformer: 50Hz – 20kHz, 0.5%THD
Frequency Response Power amplifier section: 20Hz – 20kHz, +0, -1dB 20Hz – 20kHz +1, -3dB
Analog input module to speaker output: 20Hz – 20kHz +1, -3dB
Total Harmonic Distortion Power amplifier section: 0.008% Power amplifier section: 0.0008% 0.008% (22kHz LPF, 1kHz,
(22kHz LPF, 1kHz, rated power) (22kHz LPF, 1 kHz, rated power) +10 dBV output)
Analog input module to speaker output: Analog input module to speaker output:
0.008%(22kHz LPF,1kHz, ratedpower) 0.008%(22kHz LPF,1kHz, ratedpower)
S/N Ratio At input short, 20Hz – 20kHz, ALL FLAT or OFF setting At Input short, 20Hz – 20kHz, ALL FLAT
Output volume min.: 90dB (preamplifier output) or OFF setting
Output volume max.: 61dB (preamplifier output, input 1 volume: 0dB, Output volume min.: 90dB
other inputs: OFF) Output volume max.: 61dB (input 1 vol.:
Power amplifier section: 110dB 0dB,other inputs:OFF)
Crosstalk 64dB or more at 20kHz
Tone Control Bass: +/-12dB (at 100Hz), Treble: +/-12dB (at 10kHz)
Parametric EQ 10 bands, Freq: 20Hz – 20kHz, 31 steps, Various range: +/- 12dB, Q: 0.3 – 5
Speaker Equalizer 30 (presets for TOA speakers)
High-pass Filter -12dB/oct, Variable frequency range: 20Hz - 20kHz, 31 steps
Low-pass Filter -12dB/oct, Variable frequency range: 20Hz - 20kHz, 31 steps
Compressor Depth: 1 - 5
Delay 0 – 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2)
Scene/Paging Memory 32/32
Auxiliary Function Key lock function
Control Input/Output RS-232C, D-sub connector (9P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: 1mA or less, removable terminal block
Control output: 4 outputs, open collector output, withstand voltage: 27V DC, control current: 50mA, removable terminal block
Remote volume: 2 channels, connect a 10kΩ/linear taper variable resister or 0 – 10VDC, removable terminal block
Power Source 120V AC, 60Hz
Power Consumption 150W 250W 40W
OperatingTemperature 14° to 104°F (-10° to 40°C)
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: aluminum, hair-line, black; Case: surface-treated steel plate, black paint
Dimensions (W × H × D) 16.54" × 4.24" (3.5" w/out feet) × 13.98" 16.54" × 4.24" (3.5" w/out feet) × 15.55" 16.54" × 4.24" (3.5" w/out feet) × 13.9"
(420 × 107.6 × 355mm) (420 × 107.6 × 395mm) (420 × 107.6 × 353mm)
Weight (without modules) 28.66 lbs. (13 kg) 24.25 lbs. (11 kg) 13.23 lbs. (6 kg)

2-Channel Power Amplifiers

■ 2-Channel Power Amplifiers with 70.7V outputs:
• P-9060DH: 2 × 60W
• P-9120DH: 2 × 120W
■ 2-Channel Power Amplifier models feature flexible output power allowing 50% of one
amplifier channel to be allocated to the second amplifier channel.
■ Channel 1 & 2 Inputs balanced (H=Hot, C=Cold and E=Shield) with selectable input
sensitivity: 0dB or -20dB.
■ Channel 1 input to ALL selectable switch.

Human Society with

Sound & Communication TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
Printed in Japan (1110) 833-52-410-0A u