YOU CAN DO

THE Rubik’s
Slide
Solution Guide

1
 How to Use this Guide

You will be learning the layered method to solve

the Rubik’s® Slide, similar to the layered method
used to solve the Rubik’s Cube.

Throughout the guide you will see this symbol

to indicate helpful tips. Take the time to read the
tips closely.

The gray areas on the Rubik’s Slide mean that

at the stage you are working on, the color of the
gray pieces doesn’t matter.

2
 Tips for Success

Mindset is critical - learning to solve the Rubik’s

Slide is a challenge but if you persevere, you WILL
solve the Rubik’s Slide.

Think of the algorithms as moving a piece out of

the way, setting up its correct position, and then
moving the piece into that place.

Master one layer by re-scrambling your Rubik’s

Slide and practicing multiple times before moving
on to the next layer.

Place a small sticky note on the piece of the

Rubik’s Slide you are moving so you can follow
its path.

3
 GET TO KNOW YOUR
RUBIK’S Slide

LAYERS

There are three horizontal layers in the

Rubik’s Slide, just like the 3x3 Rubik’s Cube.
Using this guide, you will solve the Rubik’s
Slide layer by layer.

BOTTOM
LAYER

MIDDLE
LAYER

TOP
LAYER

4
 FACES

Each flat surface is a face. There are 6

faces on a Rubik’s Slide.

You can
place your
palm flat
on a FACE.

CENTERS

Center pieces have one colored tile.

There are 6 center pieces.
Center pieces are single tiles, fixed to
the internal core.
When correctly solved, each face will
be the color of its center piece.

You use
one finger
to touch
a CENTER
piece.

These center piece colors

are always opposite each other.

YELLOW opposite WHITE

BLUE opposite GREEN
ORANGE opposite RED

5
 CUBIES

Cubies are the pieces that you can move

around the Rubik’s Slide between the
fixed center pieces.

The colored tiles of a cubie will be

externally facing when the Rubik’s Slide
is solved.

The black sides of each cubie will be

internal (hidden) when the Rubik’s Slide
is solved.

6
 EDGE PIECE

Edge pieces have 2 colored tiles.

You use two

fingers to
pinch an
EDGE piece.

CORNER PIECE

Corner pieces have 3 colored tiles.

You use
three fingers
to touch
all sides of
a CORNER
piece.

Unlike a Rubik’s Cube, corner pieces on

the Rubik’s Slide can occupy the spaces
of edge pieces, and vice versa.

7
 DUPLICATED CUBIES

While all other cubies are unique with the

colors on them, there are three identical
cubies on the Rubik’s Slide. Those are the
cubies with RED , BLUE and YELLOW .

Because the Rubik’s Slide always has one

cubie away from forming a completed cube,
the ending state of the Rubik’s Slide will
have the missing piece in the
RED - BLUE - YELLOW corner position.

CUBIE ORIENTATION

Cubies always stay in the same

orientation no matter their position on the
Rubik’s Slide.

8
 SLIDE SPOT

This missing piece will be referred to as

the “Slide Spot”, as this is where you
will slide your cubies into. This will be
referenced to throughout this guide.

MOVES

Each move involves pushing pairs of

cubies two at a time into the slide spot.

Sliding cubies around a single face

resembles the rotation of a pinwheel.

9
 GET TO KNOW YOUR
RUBIK’S Slide

FACE KEY NOTATION KEY

Each face referenced in Moves used in

this guide is represented this guide.
by a letter.

U=
UP
FACE
U U’

R=
RIGHT
FACE

R R’

F=
FRONT
FACE

F F’

10
 If there is a number next to the
algorithm letter, move the cubies in pairs
that many times around the face.

U4 U4’

11
An ALGORITHM is a sequence
of moves that you need to do
in a specific order.

When following the algorithms in this

guide, it is important to maintain the
FRONT face of your Rubik’s Slide so it
stays the FRONT through all of the turns.

A turn is moving the cubies clockwise when

looking at that face directly. A letter with
an apostrophe (‘) after it means to make
an inverse or counterclockwise turn of the
cubies around the cube face.

F F’

12
 RUBIK’S Slide
SOLUTION GUIDE
This solution guide
is divided into three
stages as seen below.

solve
layer ONE

solve the
middle layer

solve THE
FINAL LAYER

Now... let’s get

13solving!
SOLVE LAYER ONE

STEP 1: Solve the

white cross

Holding your UP FACE

Rubik’s Slide
Begin by holding your
Rubik’s Slide with the
YELLOW CENTER piece
on the UP (U) face.

Action 1

Locate a cubie that belongs as

a WHITE EDGE piece. There are
four edge pieces with a WHITE
face and ONLY one other color.
All other sides of the cubie will
be BLACK. Because cubie colors
can become hidden when facing
internally, you may need to
position the slide spot next to the
cubie of interest, to slide it back
and forth to determine the colors
on all sides of the cubie.

Remember the cubies do not change

orientation.
You may find the WHITE EDGE color
hidden on the TOP and MIDDLE layers.

14
 Action 2

When you’ve found a WHITE EDGE cubie, place it

in the YELLOW layer. If the WHITE EDGE piece is
already on the TOP layer, go to Action 3

If the WHITE EDGE piece is in the

MIDDLE layer, hold the piece on
the FRONT-RIGHT side of the
Rubik’s Slide with the slide spot
placed directly above, and perform
the algorithm below.

R3 U4 R3’

If the piece occupies an incorrect edge spot in the

BOTTOM layer, hold the piece in the FRONT-BOTTOM
side of the Rubik’s Slide and cycle the FRONT side
pieces until the piece is on the YELLOW layer.

BOTTOM F12’
FACE
15
If the WHITE EDGE piece occupies the BOTTOM
corner, position the WHITE EDGE piece on the
BOTTOM-RIGHT with your slide spot TOP-RIGHT
(above) and complete the algorithm.

BOTTOM
FACE

R7 U4 R7’

Action 3

When the cubie is on the YELLOW layer, cycle the

YELLOW layers pieces until the FRONT tile of the
piece matches the CENTER tile color. If it already
matches, continue to Action 4

16
Action 4

Cycle the FRONT pieces clockwise until the WHITE

tile matches the WHITE CENTER and the piece is
solved.

F12 BOTTOM
FACE

Action 5

Repeat Action 2-4 for all WHITE EDGE pieces.

When your Rubik’s Slide has

a white cross that looks like
this picture, you can move
to Step 2!

17
SOLVE LAYER ONE

STEP 2: Solve the

white corners

Holding your UP FACE

Rubik’s Slide
Begin by holding your
Rubik’s Slide with the
YELLOW CENTER piece
on the UP (U) face.

Action 1

Locate a WHITE CORNER piece

on the YELLOW layer. A WHITE
CORNER piece will have a WHITE
tile along with two other colors.

Remember the cubies do not change

orientation.
If there are no WHITE CORNER pieces to
locate on the YELLOW layer go to Action 4

18
Action 2

Hold the Rubik’s Slide so that the final destination

of the WHITE CORNER piece is in the BOTTOM-
RIGHT of the FRONT face.
Position the WHITE CORNER piece so that one
color matches the FRONT center, and the other
color faces the RIGHT side of the cube.

Action 3 Perform this algorithm.

R8 U3’ R7’

19
Action 4

If you locate a WHITE CORNER in the MIDDLE

layer, hold the Rubik’s Slide with the WHITE
CORNER piece on the RIGHT of the FRONT face.

R3 U3 R4’

Now complete the Action 2 to correctly position

the WHITE CORNER.

20
If you locate a WHITE CORNER in the BOTTOM
layer, hold the Rubik’s Slide with the WHITE
CORNER piece on the RIGHT of the FRONT face.

R7 U4 R7’

Now complete the Action 2 to correctly position

the WHITE CORNER.

Action 5

Repeat Action 2 - 4 for each WHITE CORNER.

When your Rubik’s Slide has

a complete white layer with
the center and edge pieces
matched, like this picture, you
can move to Step 3!
21
SOLVE THE MIDDLE LAYER

STEP 3: Solve the

Middle Layer Edges

Holding your UP FACE

Rubik’s Slide
Begin by holding your
Rubik’s Slide with the
YELLOW CENTER piece
on the UP (U) face.

Action 1

Locate an EDGE piece on the

YELLOW side that belongs in
the MIDDLE layer. These pieces
will have only two colors, and
neither of which will be YELLOW.
If there are NO edge pieces on the
YELLOW side go to Action 3

The one exception is the BLUE-

RED EDGE piece because of
the three identical BLUE-RED-
YELLOW pieces.

22
Action 2

Cycle the UP (U) side until the FRONT color of the

EDGE piece matches the CENTER color on the
FRONT (F) side.
The EDGE piece should now have one color
matching the FRONT center, and the other color
faces the RIGHT side of the cube.

Then perform the algorithm.

R4 U3’ R3’

23
Action 3

If you locate a MIDDLE layer EDGE in the MIDDLE

layer, but in the wrong position, perform the
following algorithm to bring it to the TOP layer.

R3 U4 R3’

Now complete Action 2 to correctly position the

MIDDLE layer EDGE piece.

Action 4

Repeat until all MIDDLE Layer EDGES are solved.

When the two bottom layers

of your Rubik’s Slide look like
this picture, you can move to
Step 4!

24
SOLVE THE FINAL LAYER

STEP 4: Solve the

YELLOW-GREEN
Edge piece

Holding your
Rubik’s Slide
From this point onward,
hold the Slide with Yellow
on top, Blue in the front,
and Red on the right.

Action Solving the Yellow-Green Edge piece

Cycle the YELLOW layer pieces until the

YELLOW-GREEN EDGE piece is solved. This
piece will become our REFERENCE piece.

We will finish the Rubik’s Slide by

solving one piece at a time.
Start each move with your slide
spot above the YELLOW-RED-
BLUE CORNER spot.

25
The remaining steps require
placing the piece you will be
solving in the BLUE-RED EDGE
position, before then replacing it
back into it’s correct position.

We will do this by placing the piece you are solving

either LEFT or RIGHT of the slide spot.

Left of the Right of the

Slide Spot Slide Spot

We will then perform the algorithm that will swap

the pieces around depending on the position of
the piece you are trying to solve.

Algorithm A

R4 U3’ R3’

Algorithm B

F4’ U3 F3

26
SOLVE THE FINAL LAYER

STEP 5: Solve the

YELLOW-GREEN-RED
Corner piece

Holding your
Rubik’s Slide
Hold the Slide with
Yellow on top, Blue in
the front, and Red on
the right.

Locate the YELLOW-GREEN-

RED CORNER piece on your TOP
YELLOW layer. If the piece is
already solved then move to Step 6

Action 1 RIGHT Move

If the YELLOW-GREEN-RED
CORNER occupies the UP-RIGHT
edge position:

Perform Algorithm B

F4’ U3 F3
After positioning your piece go to Action 2

27
Action 1 LEFT Move

If the piece occupies any of the UP-LEFT positions

of the cube, cycle the TOP layer until the YELLOW-
GREEN-RED CORNER piece is on the UP-FRONT
of the Rubik’s Slide.

Your reference piece will move

around.
Don’t worry that your YELLOW-GREEN
EDGE REFERENCE piece has now moved,
we will be moving that back again later.

Perform Algorithm A

R4 U3’ R3’
After positioning your piece go to Action 2

Action 2

Cycle the YELLOW

layer to position the
REFERENCE piece
back in place. This is to
ensure your previous
work is still solved.
28
Then cycle the YELLOW layer to place the piece
currently occupying the YELLOW-GREEN-RED
CORNER spot into the UP-RIGHT side of the
Rubik’s Slide .

U4

Perform Algorithm B

F4’ U3 F3

Finish by cycling the now solved YELLOW-GREEN

REFERENCE EDGE piece and YELLOW-GREEN-
RED CORNER piece back into place.

When your Rubik’s Slide has

the Yellow-Green-Red Corner
matched, like this picture, you
can move to Step 6!

29
SOLVE THE FINAL LAYER

STEP 6: Solve the

YELLOW-ORANGE-
GREEN Corner Piece

Holding your
Rubik’s Slide
Hold the Slide with
Yellow on top, Blue in
the front, and Red on
the right.

Locate the YELLOW-ORANGE-

GREEN CORNER piece on your
TOP YELLOW layer. If the piece is
already solved then move
to Step 7

If the YELLOW-ORANGE-GREEN
CORNER piece is already in the
BLUE-RED EDGE position go to
Action 2

Action 1 RIGHT Move

If the YELLOW-ORANGE-GREEN CORNER piece

is on the UP-FRONT, cycle the TOP layer until the
piece falls on the RIGHT side of the Rubik’s Slide.

30
Perform Algorithm B

F4’ U3 F3
After positioning your piece go to Action 2

Action 1 LEFT Move

If the piece occupies the UP-LEFT edge or UP-

LEFT-FRONT corner position, cycle the TOP layer
until the YELLOW-ORANGE-GREEN CORNER piece
is on the UP-FRONT of the Rubik’s Slide.

Perform Algorithm A

R4 U3’ R3’
After positioning your piece go to Action 2

Action 2

Cycle the YELLOW

layer to position the
REFERENCE piece
back in place. This is to
ensure your previous
work is still solved.
31
Then cycle the YELLOW layer to place the piece
currently occupying the YELLOW-ORANGE-
GREEN CORNER spot into the UP-FRONT side of
the Rubik’s Slide.

U12’

Perform Algorithm A

R4 U3’ R3’

Finish by cycling the now solved YELLOW-GREEN

REFERENCE EDGE piece and YELLOW-ORANGE-
GREEN CORNER piece back into place.

When your Rubik’s Slide has

the Green Face complete, like
this picture, you can move to
Step 7!

32
SOLVE THE FINAL LAYER

STEP 7: Solve the

YELLOW-ORANGE
Edge Piece

Holding your
Rubik’s Slide
Hold the Slide with
Yellow on top, Blue in
the front, and Red on
the right.

Locate the YELLOW-ORANGE EDGE

piece on your TOP YELLOW layer.
If the piece is already solved then
move to Step 8

If the YELLOW-ORANGE EDGE

piece is already in the BLUE-RED
EDGE position go to Action 2

Action 1 Right Move

If the YELLOW-ORANGE EDGE piece is in the

UP-FRONT edge position, cycle the TOP layer until
the piece occupies the UP-RIGHT position of the
Rubik’s Slide. Then perform Algorithm B

33
If the EDGE is already in the UP-RIGHT position,
perform Algorithm B

F4’ U3 F3
After positioning your piece go to Action 2

Action 1 LEFT Move

If the EDGE piece occupies the UP-FRONT-LEFT

corner position, cycle the TOP layer until the
YELLOW-ORANGE EDGE piece is on the
UP-FRONT of the Rubik’s Slide.

Perform Algorithm A

R4 U3’ R3’
After positioning your piece go to Action 2

34
Action 2

Cycle the YELLOW

layer to position the
REFERENCE piece
back in place. This is to
ensure your previous
work is still solved.

Then cycle the YELLOW layer to place the piece

currently occupying the YELLOW-ORANGE EDGE
spot into the UP-FRONT side of the Rubik’s Slide.

U8’
Perform Algorithm A

R4 U3’ R3’
Finish by cycling the now
solved YELLOW-GREEN
REFERENCE EDGE piece
and YELLOW-ORANGE
EDGE piece back into place.

When your Rubik’s Slide has

the Green Face & Orange edge
complete, like this picture, you
can move to Step 7!

35
SOLVE THE FINAL LAYER

STEP 8: Solve the

YELLOW-BLUE-
ORANGE Corner

Holding your
Rubik’s Slide
Hold the Slide with
Yellow on top, Blue in
the front, and Red on
the right.

Locate the YELLOW-BLUE-

ORANGE CORNER piece on your
TOP YELLOW layer. If the piece is
already solved then move to the
Action 3

If the YELLOW-BLUE-ORANGE
CORNER piece is already in the
BLUE-RED EDGE position go to
Action 2

Action 1 Piece Position FRONT

If the YELLOW-BLUE-ORANGE CORNER

occupies the UP-FRONT position:

36
Perform Algorithm B

F4’ U3 F3
After positioning your piece go to Action 3

Action 1 Piece Position RIGHT

If the YELLOW-BLUE-ORANGE CORNER

occupies the UP-RIGHT position:

Perform Algorithm B

F4’ U3 F3
After positioning your piece go to Action 2

Action 2

Cycle the YELLOW

layer to position the
REFERENCE piece
back in place. This is to
ensure your previous
work is still solved.
37
Cycle the piece currently occupying the YELLOW-
BLUE-ORANGE spot to be in the UP-FRONT.

U4’
Perform Algorithm A

R4 U3’ R3’
After positioning your piece go to Action 3

Action 3

If necessary, cycle the

YELLOW layer pieces
until all sides are solved.

Congratulations!
You have solved the Rubik’s Slide!

Rubik’s Brand Ambassador

When it came to figuring out a solution for the Rubik’s
Slide, I worked to overcome the unique obstacles
of the puzzle. Through patience, perseverance
and analysis, I took my time to develop a readable
method. After a few days of discovery, I’m filled with
gratitude and joy to share my solution with you.
~ Sam Richard
38