AN/ARC-210 INTEGRATED COMMUNICATION SYSTEM

AN/ARC-210 RT-2036(C)
ANCILLARY EQUIPMENT

Improve performance and increase versatility

2 3

AN/ARC-210 REMOTE CONTROL UNITS

ENHANCED AN/ARC-210
RT-2036(C) CAPABILITIES

Experience the improved performance and increased versatility of Collins

Aerospace ancillary equipment for our AN/ARC-210 RT-2036(C) integrated C-12719A/ARC C-12561B/ARC

communication system.
Half-size remote control unit Full-size remote control unit
The AN/ARC-210 receiver-transmitter (RT) is the nucleus of AN/ARC-210. It
provides multimode voice and data communications in normal, secure or jam-
C-12719A CONTROLLABLE RTS PRESET FUNCTIONS CONTROL FUNCTIONS
resistant modes via line-of-sight (LOS) or satellite communication (SATCOM)
• RT-1939(C), RT-1990(C), RT-1939A(C), • Change preset • LOS single channel (MAN or PRST)
links. AN/ARC-210 RT is available in several models and may be coupled with a RT-1990A(C) and RT-2036(C)
• Channels − 30-400 MHz
full complement of ancillary equipment.
C-12561B CONTROLLABLE RTS − 25 Line of sight (LOS) Simplex − AM/FM
• RT-1794(C), RT-1824(C), RT-1851(C), − 25 Electronic counter- − Tunable in 5 kHz steps
RT-1851A(C), RT-1939(C), RT-1990(C), countermeasure (ECCM) [any
RT-1939A(C), RT-1990A(C) and combination of Have Quick (HQ) • Civil land mobile modes (MAN or PRST)
RT-2036(C) Second Generation Anti-Jam Tactical − 400-941 MHz
UHF Radio for NATO (SATURN) or
DISPLAY 12.5 and 25 kHz channel spacing
Single Channel Ground and Airborne −
• 40 x 80 pixel, green NVG display Radio System (SINCGARS)]
− Tunable in 1.25 kHz steps
(half-size)
− 5 half-duplex (dual frequency)
− CTCSS tone selection
• 128 x 64 pixel green NVG display
− 1 scan (scans 4 preset channels)
(full-size) − CDCSS code selection
− 10 Legacy SATCOM (dedicated/
• 5 V ac or dc, 28 V ac or dc, 115 V ac • Air traffic control (ATC) modes
DAMA/IW)
panel lighting
− 118-137 MHz
− 1 Subnet relay (SNR) channel for
FEATURES Command Activated Sonobuoy − 8.33 and 25 kHz channel spacing
• Initiated Built-in Test (IBIT) System (CASS)/Directional Command
Activated Sonobuoy System (DICASS) • Maritime (MAR) mode
− RCU, RT, HPA, LNA and active antenna compatibility for Anti Submarine − Ship and shore (coast) selection
system Warfare (ASW) applications
• SINCGARS
• Continuous Built-in Test (CBIT) − 3 Link 11
− Wristwatch time set
− RCU, RT, HPA, active antenna and RT’s − 10 MUOS SATCOM
internal batteries − Electronic remote fill (ERF)
− 57 Maritime (international)
• Field programmable over Ethernet • Have Quick
interface − 1 SINCGARS cue
− Manual fill of WOD/MWOD/FMT
− 1 SINCGARS cold start
− Over the air (OTA) time of day (TOD)
− 1 SATURN hailing updates (send and receive)
• Guard frequency selection (GRD)
− 121.5 (civil)
− 243 (military)
• TOD updates
− Emergency time start
− Send and receive OTA
− Manual (wristwatch)
• Zeroize (ZERO)
• Automatic direction finding (ADF)
• Squelch enable/disable
 4 5

AN/ARC-210 SATCOM ANCILLARY EQUIPMENT AN/ARC-210 MOUNTS

RT mounts Link 11 “smart mount”

AM-7642/ARC MX-12366/ARC

994M-4A
High power amplifier (HPA) Low-noise amplifier/triplexer (LNA/T) MT-7438/ARC
isolated mount

MODES OF OPERATION MODES OF OPERATION

• AM/ASK/FM/FSK • Legacy UHF SATCOM (diplexer function)
• Legacy UHF SATCOM • MUOS (triplexer function)
• MUOS • Built-in test for receive path testing MT-4935 isolated mount
• Have Quick LEGACY SATCOM FEATURES AND SPECIFICATIONS
FREQUENCY RANGE (TRANSMIT) • Receiver preamplifier/bandpass filter
• 225-400 MHz (UHF and Legacy SATCOM) − Frequency range: 243-270 MHz
• 280-320 MHz (MUOS SATCOM) − Gain: 23.5 dB minimum

FREQUENCY RANGE (RECEIVE) − VSWR: <1.68:1

• 30-512 MHz • Transmitter high pass filter 99M-4

− 291 MHz MT-7435/ARC
FEATURES isolated mount
• Certified to MIL-STD-188-181B/181C/182A/183A/183B by JITC
• Same footprint and functional replacement for AM-7526/ARC
or AM-7526A/ARC • Same footprint and functional replacement for MX-11641/ARC
and MX-11745/ARC
• Certified to MIL-STD-188-181B/181C/182A/183A/183B by JITC
• Serial control interface (RS-485) MUOS FEATURES AND SPECIFICATIONS

• System BIT output • Receive performance

MT-6567 and 994M-16
• Bypass mode − Gain: 30 dB minimum low profile mounts
• MIL-STD-188-203-1A compatible interface
• Internal cooling fan for continuous transmit duty cycle up − VSWR: <1.8:1
• Link 11 mode configured from a single selection point
to 55° C • Frequency range HPA mount (preset selection)
SPECIFICATIONS − Receive: 243-270 MHz (legacy SATCOM) • Baseband audio may be shared with other equipment
340-380 MHz (MUOS SATCOM)
• Size: 6.50” H, 5.00” W, 10.00” D • Operating temperature range of - 54° C to 71° C
− Transmit: 280-320 MHz (legacy and MUOS SATCOM)
• Weight: 15 lbs. maximum • + 28 VDC power per MIL-STD-704D
• Full-duplex operation
• Power consumption: 700 watts maximum @ + 28 VDC
• RF output power: 40 watts AM minimum, 90 watts FM minimum, ADDITIONAL SPECIFICATIONS
125 watts Legacy SATCOM minimum, 50 watts MUOS average • Size: 3.15” H, 5.55” W, 7.38” D
• Qualification: MIL-STD-461F, MIL-STD-810F, MIL-STD-704F • Weight: 3.75 lbs.
• Operating temperature range: - 40° C to 71° C • Power consumption: 580 mA @ +28 VDC
• Qualification: MIL-STD-461F, MIL-STD-810F, MIL-STD-704F
• Operating temperature range: - 40° C to 71° C
• Insertion loss: 1.2 dB maximum
• Transmit VSWR: <1.63:1
MT-7006 HPA solid mount
 6 7

AN/ARC-210 REPROGRAMMING & CONTROL AN/ARC-210 TYPICAL SYSTEMS

RRS-200 reprogramming kit Receiver-transmitter tool suite
Various antennas and logic converters that will interface
(RTTS) software with an ARC-210 are not shown in this brochure.

• Java® based software application that allows the user to control

up to four ARC-210 receiver-transmitters over the MIL-STD- AS-3972/A
ADF antenna
1553B bus or using SNMP LOS antenna RCV
• Includes a CD-ROM with one software license, user’s guide and
installation instructions
7-1500-50
• Requires Ballard Technology USB 1553 interface card (same one logic converter
used in the RRS-200 reprogramming kit, can also be ordered
separately from Astronics)

RT-2036(C)
C-12719A/ARC
J1

• Ruggedized travel case

• Provides a hardware and software interface to load and verify
Operational Flight Program (OFP) software into the following
LRUs: J3
(or 1553 control)
− Legacy receiver/transmitters (RT-1794(C), RT-1824(C), RT-
1851(C), and RT-1851A(C)
− Generation 5 receiver/transmitters (RT-1939(C), RT-1939A(C), Embedded COMSEC ARC-210 los configuration
RT-1990(C), and RT-1990A(C))
− RT-2036(C) (generation 6 receiver/transmitter)
− C-12561B
SATCOM antenna ADF antenna

973F-5 lab integration test set

− C-12719A
− C-12561A RCV

• Software application (included in kit) provides MIL-STD-1553

• 19-inch rack mountable
loading functionality for the following LRUs:
• Provides connections for the following LRUs:
− RT-1794(C)
− RCU (C-12561A or C-12561B)
− RT-1824(C)
− HPA (AM-7526, AM-7526A or AM-7642)
− RT-1851(C)
RT-2036(C)/ARC*
− LNA (MX-11641, MX-11745, MX-12366)
− RT-1851A(C) J1 MX-12366/ARC
− RT (RT-1939(C), RT-1939A(C), RT-1990(C), RT-1990A(C)
− RT-1939(C)
and RT-2036(C)
− RT-1990(C)
• Provides access to MIL-STD-1553 transformer coupled bus
− RT-1990A(C) connections for external bus controller AM-7642/ARC
J3 HPA
− RT-1939A(C) • Provides access to Ethernet control and Ethernet data
SATCOM/COMSEC
connections for external controller
• Software application provides Ethernet loading functionality for
the following LRUs: • Provides test/connection points for various discrete inputs
C-12561B/ARC
and outputs, data ports, fill ports and audio ports
− RT-2036(C)
• Fused for RT, HPA, and fixture over-current protection
− C-12561B
• LED indicators for various discrete outputs of RT
− C-12719A
(or 1553 control)
• Take Control configuration between RCU and 1553 to allow
• CSS Loading for RT-1939A(C), RT-1990A(C), and RT-2036(C) for control/monitor from either RCU or 1553
• C-12561A loaded through serial interface hardware included in kit • Reversible handles to allow for upright bench-top setting
(must use software application included with C-12561A OFP disk) Embedded COMSEC ARC-210 DAMA/IW/MUOS SATCOM configuration
• Operates on +28 VDC power and routes power to all *Earlier-generation embedded COMSEC radio types can be installed instead of the RT-2036(C)
connected LRUs
8 9

AN/ARC-210 ANCILLARY
PRODUCT ENVELOPES

C-12561B/ARC

AM-7642/ARC

C-12719A/ARC

MX-12366/ARC
 10 11

AN/ARC-210 ANCILLARY EQUIPMENT

Ancillary equipment part number listing Equipment weights and power requirements (maximum)

FOOTPRINT DIMENSIONS
NOMENCLATURE COLLINS PART NUMBER DESCRIPTION NOMENCLATURE WEIGHT (POUNDS) POWER (WATTS)
(W X L X H, INCHES)
C-12561B/ARC 822-1276-006 Full-size Remote Control Unit (RCU) C-12561B/ARC 5.75 x 6.30 x 4.875 5.0 50

C-12719A/ARC 822-2092-002 Half-size RCU C-12719A/ARC 5.75 x 4.80 x 2.25 1.85 20

AM-7642/ARC 822-2852-001 UHF high power amplifier (HPA) AM-7642/ARC 5.0 x 10.0 x 6.5 15.0 700

MX-12366/ARC 822-2857-001 Low noise amplifier (LNA)/triplexer MX-12366/ARC 5.55 x 7.38 x 3.15 3.75 0.580

MT-4935/ARC 622-4934-001 RT mount with isolators MT-4935/ARC 6.25 x 8.90 x 2.63 1.6 N/A

MT-6567/ARC 622-8766-001 RT low profile mount (semi-isolated) MT-6567/ARC 5.31 x 8.95 x 1.53 1.9 N/A

994M-4/-4A 822-1708-001/-002 RT mount with Link 11 interface (solid/isolated) 994M-4 5.42 x 7.91 x 2.75 2.7 3

MT-7006/ARC 622-9465-001 HPA mount 994M-4A 6.00 x 8.65 x 3.88 2.7 3

CS-2000** 822-2725-001 Cooling shroud MT-7006/ARC 5.02 x 10.25 x 1.47 1.5 N/A

RRS-200 822-3614-001*/-002 RT/RCU reprogramming kit CS-2000 6.85 x 13.75 x 7.0 3.0 23

RTTS 984-6059-001 Receiver-transmitter tool suite software

973F-5 822-2990-002 Lab integration test set

*Includes a Ballard Technology MIL-STD-1553B Interface Card (UA1120)

**For use with MT-6567/ARC mount only
To learn more, go to
collinsaerospace.com

COLLINS AEROSPACE

800.321.2223 | +1.319.295.5100
fax: +1.319.378.1172
[email protected]
collinsaerospace.com

23-31182 01/24 © 2024 Collins Aerospace

Collins Aerospace is registered trademark of Collins Aerospace companies.