PRODUCT INFORMATION
OKS 420
High-Temperature Multipurpose Grease
Description
OKS 420 is a high-temperature grease for universal use at increased requirements.
Applications Advantages and benefits
Gearbox lubrication of heavily loaded, relatively slow-running Excellently suited for corrosive operating conditions with high
toothed gearing when grease is used instead of oil due to operating temperatures and high pressure and impact loads
leaks Economical due to optimised formula
For heavily loaded and impact-loaded drives Enables wear reduction, decreasing failure times and
Chain lubrication, e.g. of hollow-pin chains in the conveyance enabling long-term lubrication
and transport sector, for exposure to water and steam and at Long-acting, highly adhesive, temperature-stable and
higher operating temperatures waterproof, noise-damping, impact and pressure resistant
Bearing lubrication of friction and rolling bearings in
annealing yards and drying systems, manipulators and robots,
cooling-bed and conveyor systems, machines in food packing
industry, steam sterilisers etc.
Branches
Glass and foundry industry
Logistics
Paper and packaging industry
Shipbuilding and marine technology
Rubber and plastic processing
Chemical industry
Plant and machine (tool) engineering
Municipal services
Rail vehicle technology
Iron and steel industry
21.05.2024, En | Page 1/2
© OKS Spezialschmierstoffe GmbH
PRODUCT INFORMATION
OKS 420
High-Temperature Multipurpose Grease
Application tips
For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the
corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease.
Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free
inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the
grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service
conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of
the bearing. At longer relubrication intervals a complete exchange of the old grease is recommended. Only mix with appropriate
lubricants
Packaging
400 ml Cartridge 5 kg Hobbock 180 kg Drum
1 kg Can 25 kg Hobbock
Technical data
Standard Conditions Unit Value
Main components
base oil mineral oil
thickener polycarbamide
additives Moₓ-Active
Application related technical data
marking analogue to DIN 51 502 KP1-2P-10
viscosity at (40°C) DIN 51 562-1 base oil mm²/s 490
viscosity at (100°C) DIN 51 562-1 base oil mm²/s 32
drop point IP 396 °C > 230
consistency DIN 51 818 DIN ISO 2137 NLGI grade 1-2
worked penetration DIN ISO 2137 60DH 0.1 mm 290-320
lower operating temperature DIN 51 805 ≤ 1,400 hPa °C -10
upper operating temperature °C 160
colour beige
density (at 20°C) DIN 51 757 g/cm³ 0.9
water resistance DIN 51 807-1 3h/90°C Degree 1-90
DN value (dm x n) mm/min 300,000
four-ball test rig wear DIN 51 350-5 1.420/min, 1h, 800N mm <1
OKS Spezialschmierstoffe GmbH The information in this publication reflects state-of-the-art technology, as well as extensive testing and
experience. Due to the diversity of possible applications and technical realities, they can only serve as
Ganghoferstraße 47 recommendations and are not arbitrarily transferable. Therefore, no obligations, liability or warranty
82216 Maisach claims can be derived from them. We only accept liability for the suitability of our products for particular
purposes, and for certain properties of our products, in the event that we have accepted such liability in
+49 8142 3051 - 500 writing in the individual case. Any case of justified warranty claims shall be limited to the delivery of
[email protected] replacement goods free of defects, in the event that this subsequent improvement fails, to reimbursement
of the purchase price. Any and all further claims, in particular the liability for consequential injuries or
www.oks-germany.com damage, shall always be excluded. Prior to use, the customer must conduct its own testing to prove
suitability. The data are subject to change for the sake of progress. ® = Registered trademark
Product restricted to professional users. Safety data sheet available for download at www.oks-germany.com
Our Customer and Technical service will be pleased to help should you have any further questions.
21.05.2024, En | Page 2/2
© OKS Spezialschmierstoffe GmbH
