24/32/39/40/43/48/49 L28 Series

32/39/40/43/49 L38 Series

24/28/32 W/D28 Series
24/28/32 W/D38 Series
24 L/W/D29 Series
32 L/W29 Series
32 L/W39 Series
24/32 WD2A Series
24 WL2A Series
32/40/43 LL2A Series
24/32/40/43 LL/WL/WD3A Series

OPERATING INSTRUCTIONS
 Contents Freeview Play Platform.......................................... 26
Environmental Information....................................... 2 Internet Browser..................................................... 27
Disposal Information................................................. 2 HBBTV System...................................................... 27
Standby Notifications................................................ 3 Smart Center.......................................................... 28
TV Control Switch & Operation................................ 3 Alexa Ready Feature (optional).............................. 30
Using Main TV Menu................................................ 3 DVD Mode (optional).............................................. 31
Inserting the Batteries into the Remote.................... 5 Safety Information.................................................. 31
Power Connection.................................................... 5 Notes on Discs....................................................... 31
Antenna Connection................................................. 5 How to Watch a DVD.............................................. 31
Remote Control........................................................ 6 DVD Control Panel Buttons.................................... 31
Connections............................................................. 7 General Playback................................................... 31
Switching On/Off....................................................... 8 DVD Troubleshooting............................................. 32
First Time Installation............................................... 8 Disc Types Compatible with This Unit.................... 33
Media Playback via USB Input................................. 9 Specifications......................................................... 33
USB Recording......................................................... 9 Overview of the Remote Control (if DVD is
available)................................................................ 34
Media Browser....................................................... 10
General DVD Operation (if DVD is available)......... 35
FollowMe TV........................................................... 11
CEC........................................................................ 11
E-Manual................................................................ 11
Settings Menu Contents......................................... 12
General TV Operation............................................ 17
Using the Channel List........................................... 17
Configuring Parental Settings................................. 17
Electronic Programme Guide................................. 17
Teletext Services (where available)........................ 18
MHEG Teletext....................................................... 18
BBC Red Button+ (RB+)........................................ 18
Software Upgrade.................................................. 18
Troubleshooting & Tips........................................... 19
PC Input Typical Display Modes............................. 19
AV and HDMI Signal Compatibility......................... 20
Supported File Formats for USB Mode.................. 21
Video File Formats................................................. 21
Picture File Formats............................................... 21
Audio File Formats................................................. 21
Subtitle File Formats.............................................. 22
Supported DVI Resolutions.................................... 22
Connectivity............................................................ 23
Wired Connectivity................................................. 23
Wireless Connectivity............................................. 23
Wake ON................................................................ 24
Wireless Display..................................................... 24
Connecting Bluetooth Devices (optional)............... 25
Connectivity Troubleshooting................................. 25
Using Audio Video Sharing Network Service.......... 26
Apps....................................................................... 26

English - 1 -
 Environmental Information
This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps:
If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy
consumption accordingly. If you like to set the Backlight to a fixed value set as Custom and adjust the
Backlight (located under the Energy Saving setting) manually using Left or Right buttons on the remote. Set
as Off to turn this setting off.
Note: Available Energy Saving options may differ depending on the selected Mode in the Settings>Picture menu.
The Energy Saving settings can be found in the Settings>Picture menu. Note that some picture settings will
be unavailable to be changed.
If pressed Right button or Left button consecutively, “Screen will be off in 15 seconds.” message will be
displayed on the screen. Select Proceed and press OK to turn the screen off immediately. If you don’t press
any button, the screen will be off in 15 seconds. Press any button on the remote or on the TV to turn the screen
on again.
Note: Screen Off option is not available if the Mode is set to Game.
When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
energy consumption.
Disposal Information

The following information is only for EU-member states:

Disposal of products
The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately
from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symboI indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium
(Cd) defined in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or
cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative consequences for the environment and human health. For
more detailed information about the coIIection and recycling programmes available in your country, please contact
your local city office or the shop where you purchased the product.

English - 2 -
Standby Notifications Scroll through the stored channels by pushing the
button up or down.
If the TV does not receive any input signal (e.g. from
an aerial or HDMI source) for 3 minutes, it will go To change source: Press the middle of the button in
into standby. When you next switch-on, the following twice(for the second time in total), the source list will
message will be displayed: “TV switched to stand-by appear on the screen. Scroll through the available
mode automatically because there was no signal sources by pushing the button up or down.
for a long time.” Press OK to continue. To turn the TV off: Press the middle of the button in
and hold it down for a few seconds, the TV will turn
The Auto TV OFF option(in the Settings>System
into standby mode.
>More menu) could have been set to a value between
1 and 8 hours by default. If this setting is not set as Off To turn on the TV: Press the middle of the button in,
and the TV has been left on and not been operated the TV will turn on.
during the set time, it will switch into standby mode Notes:
after the set time has expired. When you next switch-on • If you turn the TV off, this cycle starts again beginning
the TV, the following message will be displayed. “TV with the volume setting.
switched to stand-by mode automatically because
• Main menu OSD cannot be displayed via control
no operation was made for a long time.” Press OK
button.
to continue. Before the TV switches into standby mode
a dialogue window will be displayed. If you do not Operation with the Remote Control
press any button the TV will switch into the standby Press the Menu button on your remote control to
mode after a waiting period of about 5 minutes. You display main menu. Use the directional buttons and
can highlight Yes and press OK to switch the TV into OK button to navigate and set. Press Return/Back
standby mode immediately. If you highlight No and or Menu button to quit a menu screen.
press OK, the TV will remain on. You can also choose
to cancel the Auto TV OFF function from this dialogue. Input Selection
Highlight Disable and press OK, the TV will remain on Once you have connected external systems to your
and the function will be cancelled. You can enable this TV, you can switch to different input sources. Press the
function again by changing the setting of the Auto TV Source button on your remote control consecutively
OFF option from the Settings>System>More menu. to select the different sources.
TV Control Switch & Operation Changing Channels and Volume
You can change the channel and adjust the volume
by using the Programme +/- and Volume +/- buttons
on the remote.
Using Main TV Menu
When the Menu button is pressed, the main TV menu
will appear at the bottom of the screen. You can
navigate through the menu items using the directional
buttons on the remote. To select an item or see the
sub-menu options of the highlighted menu press OK
button. When you highlight a menu option some of the
sub-menu items of this menu may appear on the upper
side of the menu bar for quick access. To use a quick
access item highlight it, press OK and set as desired
1. Up direction using the Left/Right directional buttons. When finished
press OK or Back/Return button to exit.
2. Down direction
Press Exit button to close the main menu.
3. Volume / Info / Sources List selection and
1. Home
Standby-On switch
When main menu is opened Home menu bar will
The Control button allows you to control the Volume
be highlighted. The content of the Home menu can
/ Programme / Source and Standby-On functions of
be customised by adding options from other menus.
the TV.
Just highlight an option and press the Down direction
To change volume: Increase the volume by pushing button on the remote. If you see Add to Home option
the button up. Decrease the volume by pushing the you can add it to the Home menu. Same way you can
button down. delete or change the position of any item in the Home
To change channel: Press the middle of the button menu. Press the Down direction button and select the
in, the information banner will appear on the screen. delete or move icon and press OK. In order to move
English - 3 -
a menu item use the Right and Left direction buttons Max Timeshift: This setting allows you to set the
to select the position that you want the item to move maximum duration for the timeshift recording.
to and press OK. Available options are approximate and the actual
2. TV recording time may change in practice depending on
the broadcast. The reserved and free storage space
2.1. Guide values will change according to this setting. Make
You can access the electronic programme guide menu sure that you have enough free space otherwise
using this option. Refer to Electronic Programme instant recording may not be possible.
Guide section for more information. Auto discard: You can set the Discard type as
2.2. Channels None, Oldest, Longest or Shortest. If it is not
You can access the Channels menu using this option. set to None, you can set the Unplayed option as
Refer to Using the Channel List section for more Included or Excluded. These options determine
information. the preferences for deleting the recordings in order
to obtain more storage space for ongoing records.
2.3. Timers
Hard disk information: You can view detailed
You can set timers for future events using the options of
information about the USB storage device connected
this menu. You can also review the previously created
to your TV. Highlight and press OK to see and press
timers under this menu.
Back/Return to close.
To add a new timer select the Add Timer tab using the
Left/Right buttons and press OK. Set the sub-menu Format Disk: If you want to delete all files on the
options as desired and when finished press OK. A new connected USB storage device and convert the disk
timer will be created. format to FAT32, you can use this option. Press OK
button while the Format Disk option is highlighted.
To edit a previously created timer, highlight that timer, A menu will appear on the screen, requiring you
select the Edit Selected Timer tab and press OK. to enter the PIN(*). After you enter the PIN, a
Change the sub-menu options as desired and press confirmation message will be displayed. Select Yes
OK to save your settings. and press OK to start formatting the USB storage
To cancel an already set timer, highlight that timer, device. Select No and press OK to cancel.
select Delete Selected Timer tab and press OK. A (*) Default PIN could have been set to 0000 or 1234. If you
confirmation message will be displayed. Highlight Yes have defined the PIN(is requested depending on the country
and press OK to proceed. The timer will be cancelled. selection) during the First Time Installation use the PIN
It is not possible to set timers for two or more events that you have defined.
that will broadcasted in different channels at the same 3. Settings
time interval. In this case you will be asked to choose You can manage the settings of your TV using the op-
one of these timers and cancel others. Highlight the tions of this menu. Refer to Settings Menu Contents
timer you want to cancel and press OK, Options menu section for more information.
will be displayed. Then highlight Set/Cancel and press
4. Apps
OK to cancel that timer. You will have to save changes
after that. In order to do that press OK, highlight Save When your TV is connected to the Internet related
Changes and press OK again. contents will also be available, including Apps related
contents. Using the Apps menu you can access and
2.4. Recordings
manage your applications. You can add new apps from
You can manage your recordings using the options the market or delete the existing ones. Refer to Apps
of this menu. You can playback, edit, delete or sort section for more information.
previously recorded events. Highlight a tab by using
5. Source
the Left or Right direction button and press OK to see
available options. You can manage your input source references using
the options of this menu. To change the current source
Recording Settings
highlight one of the options and press OK.
You can also configure your recording preferences
5.1. Source Settings
using the Settings tab in the Recordings menu.
Highlight Settings tab by using Left or Right button Edit the names, enable or disable selected source
and press OK. Then select the desired item in the options.
sub-menu and set by using Left or Right button.
Start early: You can set recording timer’s starting
time to start earlier by using this setting.
End late: You can set recording timer’s end time to
end later by using this setting.
English - 4 -
Inserting the Batteries into the Remote
Remove the back cover to reveal the battery
compartment. Insert two size AAA batteries. Make
sure the (+) and (-) signs match (observe correct
polarity). Do not mix old and new batteries. Replace
only with same or equivalent type. Place the cover back
on. A message will be displayed on the screen when
the batteries are low and must be replaced.
Note that when the batteries are low, the performance
of the remote control may be impaired.
Power Connection
IMPORTANT: The TV set is designed to operate on a
220-240V AC, 50 Hz supply. After unpacking, allow the
TV set to reach the ambient room temperature before
you connect the set to the mains. Plug the power cable
to the mains socket outlet.
Antenna Connection
Connect the aerial or cable TV plug to the AERIAL
INPUT (ANT.) socket or satellite plug to the SATELLITE
INPUT (LNB) socket located on the rear side of the TV.
Rear side of the TV

1. Satellite
2. Aerial or cable
If you want to connect a device to the TV, make sure
that both the TV and the device are turned off before
making any connection. After the connection is done,
you can turn on the units and use them.

English - 5 -
Remote Control

1. Standby: Switches On / Off the TV

2. Source: Shows available broadcast and content
sources
3. Numeric buttons: Switches the channel, enters
a number or a letter in the text box on the screen.
4. Language: Switches among sound modes
(analogue TV), displays and changes audio/subtitle
language and turns subtitles on or off (digital TV,
where available)
5. Menu: Displays TV menu
6. Volume +/-
7. Info: Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
8. Directional buttons: Helps navigate menus,
content etc. and displays the subpages in TXT
mode when pressed Right or Left
9. OK: Confirms user selections, holds the page (in
TXT mode), views Channels menu (DTV mode)
10. Back/Return: Returns to previous screen, previous
menu, opens index page (in TXT mode). Quickly
cycles between previous and current channels
or sources
11. Coloured Buttons: Follow the on-screen
instructions for coloured button functions
12. Prime Video: Launches the Amazon Prime Video
application
13. Rewind: Moves frames backwards in media such
as movies
14. Record: Records programmes
15. Pause: Pauses the media being played, starts
timeshift recording
16. Play: Starts to play selected media
8541
17. Stop: Stops the media being played
18. Fast Forward: Moves frames forward in media
such as movies
19. Netflix: Launches the Netflix application
20. Freeview Play: Connects to the Freeview Play
platform where you can access available catch-up
TV services
21. Exit: Closes and exits from displayed menus or
returns to previous screen
22. Guide: Displays the electronic programme guide
23. Programme +/-
24. Text: Displays teletext (where available), press
again to superimpose the teletext over a normal
broadcast picture (mix)
25. Mute: Completely turns off the volume of the TV

English - 6 -
Connections
See the illustrations on the left
Connector Type Cables Device side. You can use YPbPr to VGA
cable to enable YPbPr signal via
VGA input. You cannot use VGA
VGA
and YPbPr at the same time.
Connection
To enable PC/YPbPr audio, you
(back)
will need to use the back audio
inputs with a YPbPr/PC audio
cable for audio connection.
PC/YPbPr When using the wall mounting
AUDIO IN Audio kit (available from a third party
Connection in the market, if not supplied),
(back) YPbPr/PC Audio Cable we recommend that you plug all
your cables into the back of the
TV before mounting on the wall.
HDMI Insert or remove the CI module
Connection only when the TV is SWITCHED
(side&back) OFF. You should refer to the
module instruction manual for
SPDIF
SPDIF details of the settings. The/Each
(Coaxial Out)
USB input of your TV supports
Connection
devices up to 500mA. Connecting
(back)
devices that have current value
(optional)
above 500mA may damage your
SPDIF TV. When connecting equipment
SPDIF (Optical Out) using a HDMI cable to your TV,
Connection to guarantee sufficient immunity
(back) against parasitic frequency radia-
(optional) tion, you have to use a high speed
shielded (high grade) HDMI cable
Back AV with ferrites.
BACK AV (Audio/Video)
Connection
(back) Audio Video Cable

HEADPHONE Headphone
Connection
(side)

YPBPR YPbPr Video

Connection
(back)
PC to YPbPr Connection Cable

USB
Connection
(side)

CI
Connection CAM
module
(side)

LAN
Ethernet
Connection
(back) LAN / Ethernet Cable

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.

English - 7 -
 Switching On/Off and not displayed. If you have any questions,
complaints or comments regarding this privacy
To Switch the TV On
policy or its enforcement, please contact by email at
Connect the power cord to a power source such as a smarttvsecurity@vosshub.com.
wall socket (220-240V AC, 50 Hz).
Highlight Next and press OK button on the remote
To switch on the TV from standby mode either: control to continue and the Network/Internet Settings
• Press the Standby button, Programme +/- or a menu will be displayed. Please refer to Connectivity
numeric button on the remote control. section to configure a wired or a wireless connection.
If you want your TV to consume less power in standby
• Press the middle of the side function switch on the
mode, you can disable the Wake On option by setting it
TV in.
as Off. After the settings are completed highlight Next
To Switch the TV Off and press OK button to continue.
Press the Standby button on the remote control or On the next screen you need to agree to the terms
press the middle of the side function switch on the and conditions of Freeview Play to make use of the
TV in and hold it down for a few seconds, the TV will related services. Scroll the page to read the entire text
switch into standby mode. using the up/down directional buttons or Programme
To power down the TV completely, unplug the +/- buttons. Highlight Yes and press OK on the remote
power cord from the mains socket. to confirm and proceed. Highlight No and press OK to
Note: When the TV is switched into standby mode, the standby
proceed without confirmation. For further requirements
LED can blink to indicate that features such as Standby for Freeview Play services refer to the Freeview Play
Search, Over Air Download or Timer is active. The LED can Platform section.
also blink when you switch on the TV from standby mode. On next screen you can set broadcast types to be
First Time Installation searched, set your encrypted channel searching
When turned on for the first time, the language and time zone (depending on the country selection)
selection screen is displayed. Select the desired preferences. Additionally you can set a broadcast
language and press OK. In the following steps of type as your favourite one. Priority will be given to the
the installation guide, set your preferences using the selected broadcast type during the search process
directional buttons and OK button. and the channels of it will be listed on the top of the
channel list. When finished, highlight Next and press
On the second screen set your country preference. OK to continue.
Depending on the Country selection you may be asked
to set and confirm a PIN at this point. The selected PIN About Selecting Broadcast Type
cannot be 0000. You have to enter it if you are asked To turn a search option for a broadcast type highlight
to enter a PIN for any menu operation later. it and press OK. The checkbox next to the selected
You can activate Store Mode option in the next step. option will be checked. To turn the search option off
This option will configure your TV’s settings for store clear the checkbox by pressing OK after moving the
environment and depending on the TV model being focus on the desired broadcast type option.
used, the supported features of it may be displayed on Digital Aerial: If D. Aerial broadcast search option
the side of the screen as an info banner. This option is turned on, the TV will search for digital terrestrial
is intended only for store use. It is recommended to broadcasts after other initial settings are completed.
select Home Mode for home use. This option will be Digital Cable: If D. Cable broadcast search option
available in Settings>System>More menu and can is turned on, the TV will search for digital cable
be turned off/on later. Make your selection and press broadcasts after other initial settings are completed.
OK to continue. A message will be displayed before starting to search
Depending on the model of your TV and the country asking if you want to perform cable network search. If
selection Privacy Settings menu may appear at you select Yes and press OK you can select Network
this point. Using this menu you can set your privacy or set values such as Frequency, Network ID and
privileges. Highlight a feature and use Left and Search Step on the next screen. If you select No
Right directional buttons to enable or disable. Read and press OK you can set Start Frequency, Stop
the related explanations displayed on the screen Frequency and Search Step on the next screen.
for each highlighted feature before making any When finished, highlight Next and press OK button
changes. You can use Programme +/- buttons to to continue.
scroll up and down to read the entire text. You will Note: Searching duration will change depending on the
be able to change your preferences at any time selected Search Step.
later from the Settings>System>Privacy Settings Satellite: If Satellite broadcast search option is turned
menu. If the Internet Connection option is disabled on, the TV will search for digital satellite broadcasts
Network/Internet Settings screen will be skipped after other initial settings are completed. Before
English - 8 -
satellite search is performed some settings should be NTFS disk formatting but recording will not be available
made. Antenna Type menu will be displayed first. You with NTFS formatted disks.
can select Antenna Type as Direct, Single Satellite While formatting USB hard drives which have
Cable or DiSEqC switch by using Left or Right more than 1TB (Tera Byte) storage space you may
buttons. After selecting your antenna type press OK to experience some problems in the formatting process.
see the options to proceed. Continue, Transponder
list and Configure LNB options will be available. You Wait a little while before each plugging and unplugging
can change the transponder and LNB settings using as the player may still be reading files. Failure to do
the related menu options. so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
• Direct: If you have a single receiver and a direct while playing a file.
satellite dish, select this antenna type. Press OK to
continue. Select an available satellite on the next You can use USB hubs with your TV’s USB inputs.
screen and press OK to scan for services. External power supplied USB hubs are recommended
in such a case.
• Single Satellite Cable: If you have multiple
receivers and a single satellite cable system, select It is recommended to use the TV’s USB input(s)
this antenna type. Press OK to continue. Configure directly, if you are going to connect a USB hard disk.
settings by following instructions on the next screen. Note: When viewing image files the Media Browser menu
Press OK to scan for services. can only display 1000 image files stored on the connected
USB device.
• DiSEqC switch: If you have multiple satellite dishes
and a DiSEqC switch, select this antenna type. Then USB Recording
set the DiSEqC version and press OK to continue. Recording a Programme
You can set up to four satellites (if available) for IMPORTANT: When using a new USB hard disk
version v1.0 and sixteen satellites for version v1.1 drive, it is recommended that you first format the
on the next screen. Press OK button to scan the first disk using your TV’s Format Disk option in the
satellite in the list. TV>Recordings>Settings menu.
Analogue: If Analogue broadcast search option is To record a programme, you should first connect a USB
turned on, the TV will search for analogue broadcasts disk to your TV while the TV is switched off. You should
after other initial settings are completed. then switch on the TV to enable the recording feature.
After the initial settings are completed TV will start To use recording your USB drive should have 2 GB free
to search for available broadcasts of the selected space and be USB 2.0 compatible. If the USB drive
broadcast types. is not compatible an error message will be displayed.
While the search continues current scan results will To record long duration programmes such as movies, it
be displayed at the bottom of the screen. After all the is recommended to use USB Hard disk drives (HDD’s).
available stations are stored, Channels menu will be Recorded programmes are saved into the connected
displayed. You can edit the channel list according to USB disk. If desired, you can store/copy recordings
your preferences using the Edit tab options or press onto a computer; however, these files will not be
the Menu button to quit and watch TV. available to be played on a computer. You can play
the recordings only via your TV.
While the search continues a message may appear,
Lip Sync delay may occur during the timeshifting. Radio
asking whether you want to sort channels according
record is supported. The TV can record programmes
to the LCN(*). Select Yes and press OK to confirm.
up to ten hours.
(*) LCN is the Logical Channel Number system that organizes Recorded programmes are split into 4GB partitions.
available broadcasts in accordance with a recognizable
channel number sequence (if available).
If the writing speed of the connected USB disk is not
sufficient, the recording may fail and the timeshifting
Note: Do not turn off the TV while initializing first time
feature may not be available.
installation. Note that, some options may not be available
depending on the country selection. It is recommended to use USB hard disk drives for
recording HD programmes.
Media Playback via USB Input
Do not pull out the USB/HDD during a recording. This
You can connect 2.5” and 3.5” inch (HDD with external power may harm the connected USB/HDD.
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
If the AC cord is unplugged while there is an active
USB-recording timer setting, it will be cancelled.
IMPORTANT! Back up the files on your storage devices Multipartition support is available. A maximum of two
before connecting them to the TV. Manufacturer will different partitions are supported. The first partition
not be responsible for any file damage or data loss. of the USB disk is used for USB Recording ready
Certain types of USB devices (e.g. MP3 Players) features. It also must be formatted as the primary
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32 and
English - 9 -
partition to be used for the USB Recording ready Note: Default PIN could have been set to 0000 or 1234. If you
features. have defined the PIN(is requested depending on the country
selection) during the First Time Installation use the PIN that
Some stream packets may not be recorded because
you have defined.
of signal problems, as a result sometimes videos may
freeze during playback. IMPORTANT: Formatting your USB drive will erase
Record, Play, Pause, Display (for playlist dialogue) keys ALL the data on it and it’s file system will be converted
can not be used when teletext is on. If a recording starts to FAT32. In most cases operation errors will be fixed
from timer when teletext is on, teletext is automatically after a format but you will lose ALL your data.
turned off. Also teletext usage is disabled when there If “USB disk writing speed too slow to record”
is an ongoing recording or playback. message is displayed on the screen while starting a
Timeshift Recording recording, try restarting the recording. If you still get
the same error, it is possible that your USB disk does
Press Pause button while watching a broadcast to
not meet the speed requirements. Try connecting
activate timeshifting mode. In timeshifting mode, the
another USB disk.
programme is paused and simultaneously recorded to
the connected USB disk. Media Browser
Press Play button again to resume the paused You can play back music and movie files and display
programme from where you stopped. Press the Stop photo files stored on a USB storage device by
button to stop timeshift recording and return to the connecting it to your TV. Connect a USB storage device
live broadcast. to one of the USB inputs located on the side of the TV.
Timeshift cannot be used while in radio mode. After connecting a USB storage device to your TV
You can use the timeshift rewind feature after resuming Media Browser menu will be displayed on the screen.
normal playback or fast forward option. You can access the content of the connected USB
device any time later from the Sources menu. Select
Instant Recording
the related USB input option from this menu and press
Press Record button to start recording an event OK. Then select the file of your choice and press OK
instantly while watching a programme. You can press to display or play it back.
Record button on the remote control again to record
You can set your Media Browser preferences by using
the next event after selecting the next programme from
the Settings menu. Settings menu can be accessed
within the electronic programme guide. Press Stop
via the information bar which is displayed on the
button to cancel instant recording.
bottom of the screen when pressed the Info button
You can not switch broadcasts during the recording while playing back a video file or displaying a picture
mode. While recording a programme or during the file. Press the Info button, highlight the gear wheel
timeshifting, a warning message appears on the screen symbol positioned on the right side of the information
if your USB device speed is not sufficient. bar and press OK. Picture Settings, Sound Settings,
Watching Recorded Programmes Media Browser Settings and Options menus will be
Select Recordings from the TV menu. Select a available. The contents of these menus may change
recorded item from the list (if previously recorded). according to the type of the currently open media file.
Press the OK button to view the Options menu. Select Only Sound Settings menu will be available while
an option then press OK button. playing back audio files.
Note: Viewing main menu and menu items will not be available
Loop/Shuffle Mode Operation
during the playback.
All files in the list will be
Press the Stop button to stop a playback and return continuously played in
Start playback and activate
to the Recordings. original order
Slow Forward The same file will be
Start playback and activate played continuously
If you press Pause button while watching recorded (repeat)
programmes, the slow forward feature will be available.
All files in the list will be
You can use Fast Forward button to slow forward. played once in random
Start playback and activate
Pressing Fast Forward button consecutively will order
change slow forwarding speed. All files in the list will be
Recording Configuration Start playback and activate , continuously played in
the same random order
Select the Settings tab in the TV>Recordings menu
to configure the recording settings and press OK. To use the functions on the information bar highlight the
Format Disk: You can use the Format Disk option for symbol of the function and press OK. To change the
formatting the connected USB disk. Your PIN will be status of a function highlight the symbol of the function
required to use the Format Disk feature.
English - 10 -
and press OK as much as needed. If the symbol is The TV supports ARC (Audio Return Channel). This
marked with a red cross, that means it is deactivated. feature is an audio link meant to replace other cables
Custom Boot Up Logo between the TV and an audio system (A/V receiver or
speaker system).
You can personalize your TV and see your favourite
image or photo on the screen each time your TV boots When ARC is active, the TV does not mute its other
up. To do this, copy your favourite image files into a audio outputs automatically. You will need to decrease
USB disk and open them in the Media Browser. Select TV volume to zero manually if you wish to hear the
USB input from the Sources menu and press OK. ARC audio only (same as optical or co-axial digital
When you have chosen the desired image, highlight audio outputs). If you want to change connected
it and press OK to view it in full screen. Press the device’s volume level, you should select that device
Info button, highlight the gear wheel symbol on the from the source list. In that case volume control keys
information bar and press OK. Select Options and are directed to connected audio device.
press OK to enter. Set Boot Logo option will be Note: ARC is supported only via the HDMI2 input.
available. Highlight it and press OK again to choose the System Audio Control
image as custom boot logo. A confirmation message
will be displayed. Select Yes and press OK again. If Allows an Audio Amplifier/Receiver to be used with
the image is suitable(*) you will see it on the screen the TV. The volume can be controlled using the
during the TV’s next boot up. remote control of the TV. To activate this feature set
the Speakers option in the Settings>System>More
Note: If you perform a First Time Installation the TV will
return to using the default logo, if any.
menu as Amplifier. The TV speakers will be muted
and the sound of the watched source will be provided
(*) Images should have an aspect ratio of 16:9 and they should
from the connected sound system.
be in .jpg, .jpeg or .jpe file formats. Only files with sizes no
greater then 300KB are supported. The image cannot be set as Note: The audio device should support System Audio Control
boot logo, which’s resolution doesn’t appear on the info banner. feature and CEC option should be set as Enabled.

FollowMe TV E-Manual
With your mobile device you can stream the current You can find instructions for your TV’s features in the
broadcast from your smart TV using the FollowMe E-Manual.
TV feature. Install the appropriate Smart Center To access the E-Manual, enter Settings menu, select
application to your mobile device. Start the application. Manuals and press OK. For quick access press Menu
button and then Info button.
For further information on using this feature refer to
By using the directional buttons select a desired
the instructions of the application you use.
category. Every category includes different topics.
Note: Depending on model, your TV may not support this
Select a topic and press OK to read instructions.
function. The application may not be compatible with all mobile
devices. UHD (4K, Ultra HD) channels are not supported and To close the E-Manual screen press the Exit or Menu
both of the devices must be connected to the same network. button.
CEC Note: Depending on model, your TV may not support this
function. The contents of the E-Manual may vary according
This function allows to control the CEC-enabled to the model.
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Settings>System>More menu
should be set as Enabled at first. Press the Source
button and select the HDMI input of the connected
CEC device from the Sources List menu. When
new CEC source device is connected, it will be listed
in source menu with its own name instead of the
connected HDMI ports name(such as DVD Player,
Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected. To terminate this operation and control
the TV via the remote again, press and hold the “0-
Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the Settings>System>More
menu accordingly.

English - 11 -
Settings Menu Contents
Picture Menu Contents
You can change the picture mode to suit your preference or requirements. Picture mode can
Mode
be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.
Contrast Adjusts the light and dark values on the screen.
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Energy Saving Screen Off or Off.
Note: Available options may differ depending on the selected Mode.

This setting controls the backlight level. The backlight function will be inactive if the
Backlight
Energy Saving is set to an option other than Custom.
Advanced Settings
Dynamic
You can change the dynamic contrast ratio to desired value.
Contrast
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
Noise Reduction
the amount of noise.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
Colour Temp
are available.
If the Colour Temp option is set as Custom, this setting will be available. Increase the
White Point
‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.
Picture Zoom Sets the desired image size format.
This option may be available depending on the Picture Zoom setting. Highlight and
Picture Shift
press OK, then use directional buttons to shift the picture upwards or downwards.
Films are recorded at a different number of frames per second to normal television programmes.
Film Mode
Turn this feature on when you are watching films to see the fast motion scenes clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift Adjust the desired colour tone.
While watching from a HDMI source, this feature will be visible. You can use this feature
HDMI Full Range
to enhance blackness in the picture.
PC Position Appears only when the input source is set to VGA/PC.
Autoposition Automatically optimizes the display. Press OK to optimize.
H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in dot
Dot Clock
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the input source(computer etc.) you may see a hazy or noisy picture on
Phase
the screen. You can use phase to get a clearer picture by trial and error.
Reset Resets the picture settings to factory default settings (except Game mode).
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu
while in PC mode.

English - 12 -
Sound Menu Contents
Volume Adjusts the volume level.
Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.
Balance Adjusts whether the sound comes from the left or right speaker.
Sets headphone volume.
Headphone Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Sound Mode You can select a sound mode (If the viewed channel supports).
Press OK to open the Bluetooth menu screen. Using this screen you can discover and
Bluetooth (optional)
connect the Bluetooth wireless technology enabled sound devices to your TV.
AVL (Automatic
Sets the sound to obtain fixed output level between programmes.
Volume Limiting)
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this
option as Headphone.
Headphone/Lineout
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing.
Dynamic Bass
Enables or disables the Dynamic Bass.
(optional)
DTS TruSurround Enables or disables the DTS TruSurround.
Dynamic Range Control provides gain adjustment of the source to maintain suitable audible
DTS DRC range at both low and high playback levels. Enable or disable the DTS DRC by setting as
On or Off.

Digital Out Sets digital out audio type.

English - 13 -
Network Menu Contents
Network Type Disable the network connection or change the connection type.
Scan Wireless Start a search for wireless networks. This option will be available if the Network Type
Networks is set as Wireless Device.
If your modem/router device has WPS, you can directly connect to it using this option.
Press WPS on your Highlight this option and press OK. Go to your modem/router device and press the
wifi router WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Start a speed test to check your connection bandwidth. The result will be displayed on
Internet Speed Test
the screen when finished.
Advanced Settings Change the IP and DNS configurations of your TV.
Wake On Enable or disable this feature by setting it as On or Off.
Note: For detailed information on the options of this menu refer to the Connectivity section.

Installation Menu Contents

Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.
Automatic channel
D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
scan (Retune)
analogue stations. Satellite: Searches and stores satellite stations.
Manual channel
This feature can be used for direct broadcast entry.
scan
Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial
Network channel
network channels. D. Cable: Searches for cable network channels. Satellite: Searches
scan
for satellite network channels.
You can use this setting for fine tuning analogue channels. This feature is not available
Analogue fine tune if no analogue channels are stored and if currently watched channel is not an analogue
channel.
Displays satellite settings. Satellite list: Displays available satellites. You can Add,
Satellite Settings Delete satellites or Edit satellite settings on the list. Antenna installation: You can
change satellite antenna settings and/or start a satellite scan.
Displays installation settings menu. Standby Search (*): Your TV will search for new or
missing channels while in standby. Any new found broadcasts will be shown. Dynamic
Installation Settings Channel Update(*): If this option is set as Enabled, the changes on the broadcasts
(optional) such as frequency, channel name, subtitle language etc., will be applied automatically
while watching.
(*) Availability depends on model.

Use this setting to clear channels stored. This setting is visible only when the Country
Clear Service List
option is set to Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be
Network listed in the channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related information such as signal level/
Signal Information
quality, network name etc for available frequencies.
First time installation Deletes all stored channels and settings, resets TV to factory settings.

English - 14 -
System Menu Contents
Conditional Access Controls conditional access modules when available.
Language You may set a different language depending on the broadcaster and the country.
Manage your privacy privileges for smart TV related applications. Press OK to enter
Privacy Settings (*)
the menu and set according to your preferences.
Enter correct password to change parental settings. You can easily adjust Menu Lock,
Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN
Parental or change the Default CICAM PIN using the related options.
Note: Some menu options may not be available depending on the country selection in the First Time
Installation. Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested
depending on the country selection) during the First Time Installation use the PIN that you have defined.

Date/Time Sets date and time.

Sources Edit the names, enable or disable selected source options.
Accessibility Displays accessibility options of the TV.
Hard of Hearing Enables any special feature sent from the broadcaster.
A narration track will be played for the blind or visually impaired audience. Press OK
Audio to see all available Audio Description menu options. This feature is available only if
Description the broadcaster supports it.
Note: Audio description sound feature is not available in recording or time shifting mode.

If this feature is supported by your TV, you can view your ESN(*) number and deactivate
Netflix Netflix.
(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.

More Displays other setting options of the TV.

Menu Timeout Changes timeout duration for menu screens.
Standby LED If set as Off the standby LED will not light up when the TV is in standby mode.
HBBTV (*) You can enable or disable this feature by setting it as On or Off.
Software
Ensures that your TV has the latest firmware. Press OK to see the menu options.
Upgrade
Application
Displays current software version.
Version
This option is used to select which subtitle mode will be on the screen (DVB subtitle /
Subtitle Mode Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is available
only for the country option of Norway.
Sets the desired time for the TV to automatically go into standby mode when not being
Auto TV OFF
operated.
Biss is a satellite signal scrambling system that is used for some broadcasts. If you
Biss Key need to enter Biss key on a broadcast, you can use this setting. Highlight Biss Key and
press OK to enter keys on the desired broadcast.
Select this mode for store display purposes. Whilst Store Mode is enabled, some items
Store Mode
in the TV menu may not be available.
AVS feature allows you to share files stored on your smartphone or tablet pc. If you have
AVS (Audio
a compatible smartphone or tablet pc and the appropriate software is installed, you can
Video Sharing)
share/play photos on your TV. See instructions of your sharing software for more information.
This setting configures the power up mode preference. Last State and Standby options
Power Up Mode
are available.
Virtual Remote Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely. Press Left
CEC
or Right button to enable or disable the feature.

English - 15 -
 This function allows the connected HDMI-CEC compatible device to turn on the TV
CEC Auto Power
and switch to its input source automatically. Press Left or Right button to enable or
On
disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier.
Speakers
You can use the remote control of the TV to control the volume of the audio device.
Press OK to open the Smart Remote menu screen. Using this screen you can discover
Smart Remote
and connect the Bluetooth wireless technology enabled remote controller devices to
(optional)
your TV.
Show All Cookies
Displays all saved cookies.
(*)
Delete All
Deletes all saved cookies.
Cookies (*)
OSS Displays Open Source Software license information.
(*) These features may not be available depending on the model of your TV and the selected country in the First Time Installation.

English - 16 -
 TV. You can change the default PIN of the CI CAM
General TV Operation using this option.
Using the Channel List Note: Default PIN could have been set to 0000 or 1234. If you
have defined the PIN(is requested depending on the country
The TV sorts all stored stations in the channel list. You selection) during the First Time Installation use the PIN that
can edit this channel list, set favourites or set active you have defined.
stations to be listed by using the Channels menu
Some options may not be available depending on the model
options. Press the OK button to open the channel list. and/or on the country selection in the First Time Installation.
You can filter the listed channels or make advanced
changes in the current list using the Filter and Edit Electronic Programme Guide
tab options. Highlight the tab you want and press OK By means of electronic programme guide function of
to see available options. your TV you can browse the event schedule of the
Managing the Favourite Lists currently installed channels on your channel list. It
depends on the related broadcast whether this feature
You can create four different lists of your favourite is supported or not.
channels. Enter the TV>Channels menu or press
To access the programme guide, press the Guide
the OK button in order to open the Channels menu.
button on your remote. You can also use the Guide
Highlight the Edit tab and press OK to see the editing
option under TV menu.
options and select the Tag/Untag channel option.
Select the desired channel on the list by pressing the There are 2 different types of schedule layouts
OK button while the channel is highlighted. You can available, Timeline Schedule and Now/Next. To
make multiple choices. You can also use the Tag/ switch between these layouts highlight the tab with
Untag all option to select all channels on the list. the name of the alternative layout on the upper side
Then press Back/Return button to return to the Edit of the screen and press OK.
menu options. Select Add/Remove Favourites option Use the directional buttons to navigate through the
and press the OK button again. Favourite channel list programme guide. Use the Back/Return button to
options will be displayed. Set the desired list option use the tab options on the upper side of the screen.
to On. The selected channel/s will be added to the Timeline Schedule
list. In order to remove a channel or channels from a
favourite list follow the same steps and set the desired In this layout option, all events of the listed channels will
list option to Off. be displayed by timeline. You can use the directional
buttons to scroll through the list of the events. Highlight
You can use the filtering function in the Channels menu an event and press OK to display event options menu.
to filter the channels in the channel list permanently
according to your preferences. For instance, using the Press Back/Return button to use available tab options.
options of the Filter tab, you can set one of your four Highlight Filter tab and press OK to see the filtering
favourite lists to be displayed every time the channel options. To change the layout highlight Now/Next and
list is opened. press OK. You can use the Previous Day and Next
Day options to display the events of the previous and
Configuring Parental Settings next day.
The Parental menu options can be used to prohibit Highlight Extras tab and press OK to access below
users from viewing of certain programmes, channels options.
and using of menus. These settings are located in the
Highlight Genre: Displays Highlight Genre menu.
Settings>System>Parental menu.
Select a genre and press OK. The events in the
To display parental lock menu options, a PIN should be programme guide matching the selected genre will
entered. After coding the correct PIN, Parental menu be highlighted.
will be displayed. Guide Search: Displays searching options. Using
Menu Lock: This setting enables or disables access these options, you can search the programme guide
to all menus or installation menus of the TV. database in accordance with the selected criteria.
Matching results will be listed.
Guidance: This setting enables or disables access
Now: Displays current event of the highlighted
some of the MHEG applications. Disabled applications
channel.
can be released by entering the right PIN.
Zoom: Highlight and press OK to see events in a
Internet Lock: If this option is set to On, the internet wider time interval.
using applications will be disabled. Set to Off to release Now/Next Schedule
these applications again.
In this layout option, only the current and next events
Set PIN: Defines a new PIN number. of the listed channels will be displayed. You can use
Default CICAM PIN: This option will appear as greyed the directional buttons to scroll through the list of the
out if no CI module is inserted into the CI slot of the events.
English - 17 -
Press Back/Return button to use available tab options. Teletext Services (where available)
Highlight Filter tab and press OK to see the filtering
Press the Text button to enter. Press again to activate
options. To change the layout highlight Timeline
mix mode, which allows you to see the teletext page
Schedule and press OK.
and the TV broadcast at the same time. Press once
Event Options more to exit. If available, sections in the teletext pages
Use the directional buttons to highlight an event will become colour-coded and can be selected by
and press OK button to display Options menu. The pressing the coloured buttons. Follow the instructions
following options are available. displayed on the screen.
Select Channel: Using this option, you can switch Digital Teletext
to the selected channel in order to watch it. The
programme guide will be closed. Press the Text button to view digital teletext information.
More Info: Display detailed information on the selected Operate it with the coloured buttons, cursor buttons
event. Use up and down directional buttons to scroll and the OK button. The operation method may differ
through the text. depending on the contents of the digital teletext. Follow
Set Timer on Event / Delete Timer on Event: Select the instructions displayed on the digital teletext screen.
Set Timer on Event option and press OK. You can set When the Text button is pressed again, the TV returns
timers for future events. To cancel an already set timer, to television broadcast.
highlight that event and press the OK button. Then MHEG Teletext
select Delete Timer on Event option. The timer will With digital terrestrial broadcasting (DVB-T), in addition
be cancelled. to pictures and sound, you can also view digital teletext.
Record / Delete Rec. Timer: Select the Record Digital teletext is sometimes broadcast at the same
option and press the OK button. If the event is going time with the normal broadcasting.
to be broadcasted at a future time, it will be added
to Timers list to be recorded. If the selected event is • Press the Text or Red button
being broadcasted at the moment, recording will start • The digital teletext information appears
immediately. • Operate it with the coloured buttons, directional
To cancel an already set record timer, highlight that buttons and OK button
event and press the OK button and select the option
Delete Rec. Timer. The record timer will be cancelled. The operation method may differ depending on the
IMPORTANT: Connect a USB disk to your TV while the TV contents of the digital teletext. Follow the instructions
is switched off. You should then switch on the TV to enable displayed on digital teletext screen. Press the Text
the recording feature. button to return to television broadcast.
Notes: You cannot switch to any other channel while there is BBC Red Button+ (RB+)
an active recording or timer on the current channel.
It is not possible to set timer or record timer for two or more
While watching BBC channels, press the Red button or
individual events at the same time interval. Text button to access Red Button+ services provided
by the BBC. On the opening page you can access to
Integrated Catch-Up Services BBC’s main services such as BBC iPlayer, BBC News,
You can enjoy Freeview Play catch-up TV services BBC Sport and many others. There are also links to
that work directly through the electronic programme the home pages of the related applications available.
guide. Whilst you are on a channel use the directional Use the navigation buttons on the TV’s remote control
buttons to scroll back in time through the timeline- to move through the application. Press Exit button to
based guide. You will see contents from last few days. close and exit.
Available catch-up contents may change according Software Upgrade
to broadcasters and will be marked with a play icon.
Highlight the content you want to play back and press Your TV is capable of finding and updating the firmware
the OK button. automatically via the broadcast signal or via Internet.
Make sure that your TV is connected to your home Software upgrade search via user interface
network in order to use the catch-up services. For On the main menu select Settings>System and then
further information regarding this matter and other More. Navigate to Software upgrade and press the
requirements for Freeview Play services refer to the OK button. Then select Scan for upgrade and press
Connectivity and Freeview Play Platform sections. OK button to check for a new software upgrade.
If a new upgrade is found, it starts to download the
upgrade. After the download is completed, a warning
will be displayed, press OK button to complete software
upgrade process and restart TV.

English - 18 -
3 AM search and upgrade mode check the storage device is correctly formatted and
Your TV will search for new upgrades at 3:00 o’clock there is sufficient space.
if Automatic scanning option is set to Enabled and if USB is too slow
the TV is connected to an aerial signal or to Internet. If If a “USB storage device writing speed too slow to
a new software is found and downloaded successfully, record” message is displayed on the screen while
it will be installed at the next power on. starting a recording, try restarting the recording. If you
Note: Do not unplug the power cord while led is blinking during still get the same error, it is possible that your USB
the reboot process. If the TV fails to come on after the upgrade, storage device does not meet the speed requirements.
unplug, wait for two minutes then plug it back in.
Try using a different USB storage device.
All updates are automatically controlled. If a manual search
is carried out and no software is found then this is the current
PC Input Typical Display Modes
version. The following table is an illustration of some of the
Troubleshooting & Tips typical video display modes. Your TV may not support
all resolutions.
TV will not turn on
Make sure the power cord is plugged in securely to a Index Resolution Frequency
wall outlet. Press the Power button on the TV. 1 640x480 60Hz
Poor picture 2 640x480 75Hz
• Check if you have correctly tuned the TV. 3 800x600 56Hz
• Low signal level can cause picture distortion. Please 4 800x600 60Hz
check antenna connections. 5 800x600 72Hz
• Check if you have entered the correct channel 6 800x600 75Hz
frequency if you have performed manual tuning. 7 1024x768 60Hz
No picture 8 1024x768 70Hz
• TV is not receiving any signal. Make sure the correct 9 1024x768 75Hz
source has been selected. 10 1152x864 75Hz
• Is the antenna connected properly? 11 1280x768 60Hz
• Is the antenna cable damaged? 12 1360x768 60Hz
• Are suitable plugs used to connect the antenna? 13 1280x960 60Hz
• If you are in doubt, consult your dealer. 14 1280x1024 60Hz

No sound 15 1280x1024 75Hz

16 1400x1050 60Hz
• Check if the TV sound is muted. Press the Mute
button or increase the volume to check. 17 1440x900 60Hz

• Sound is coming from only one speaker. Check the 18 1440x900 75Hz
balance settings from Sound menu. 19 1920x1080 60Hz
Remote control - no operation
• The batteries may be exhausted. Replace the
batteries.
• The batteries maybe inserted incorrectly. Refer to
the section “Inserting the Batteries into the Remote”.
No signal on an input source
• It is possible that no device is connected.
• Check the AV cables and connections from your
device.
• Check the device is switched on.
Recording unavailable
To record a programme, you should first correctly
connect a USB storage device to your TV, while the
TV is switched off. You should then switch on the TV
to enable the recording feature. If you cannot record,

English - 19 -
AV and HDMI Signal Compatibility

Source Supported Signals Available

PAL O
SECAM O
Back AV
NTSC4.43 O
NTSC3.58 O
480i, 480p 60Hz O
576i, 576p 50Hz O
YPbPr
720p 50Hz,60Hz O
1080i 50Hz,60Hz O
480i, 480p 60Hz O
576i, 576p 50Hz O
720p 50Hz,60Hz O
1080i 50Hz,60Hz O
HDMI

24Hz, 25Hz,
1080p 30Hz, 50Hz, O
60Hz

(X: Not Available, O: Available)

In some cases a signal on the TV may not be displayed
properly. The problem may be an inconsistency with
standards from the source equipment (DVD, Set-top
box, etc. ). If you do experience such a problem please
contact your dealer and also the manufacturer of the
source equipment.

English - 20 -
 Supported File Formats for USB Mode
Video File Formats

Extension Video Codec Max. Resolution & Frame Rate & Bit Rate

.mpg, .mpeg, .dat, .vob

MPEG1/2, H.264, VC1
.ts, .trp, .m2ts
.avi MPEG1/2, MPEG4, H.264, MJPEG
.mp4, .m4a, .m4v, .mov, .qt,
MPEG1/2, H.263, MPEG4, H.264
.3gp, .3g2, .3gpp
.mkv MPEG 1/2, MPEG4, H.264
.flv Sorenson Sp, MPEG4, H.264 H.264: 1080Px2@30fps - 50Mbps, 1080P@60fps -
50Mbps Other: 1080P@60fps - 50Mbps
.ogm, .ogg MPEG1/2, MPEG4
.asf, .wmv MPEG4, WMV3, VC1
.rm, .rmvb RV30, RV40
.webm VP9, VP8
.mp4, .mov, .3gpp, .3gp,
MPEG transport stream, HEVC/H.265
.ts,.trp, .tp, .mkv

Picture File Formats

Extension Specification Resolution (width x height)

Baseline 8192 x 8192

.jpg, .jpeg
Progressive 3000 x 3000
RGB 1/4/8/16/24/32 bit
.bmp
RLE 4/8 bit
87a
.gif
89a (Only 1 picture at animation format)
Grayscale, 24/32 bit per pixel
8192 x 8192
.png Interlace format
Progressive
.tiff, .tif Tagged image file format
Lossy compression VP8 key frame version number support 0~3
.webp
Lossless compression

Audio File Formats

Extension Format

.mp3 .mp3
.ac3 .ac3
.aac .AAC
.wma .WMA
.amr .AMR-NB, .AMR-WB
.wav . MPEG La, .AAC, .PCM
.flac . FLAC

English - 21 -
Subtitle File Formats

External Subtitles

Extension Specification

.ssa SubStation Alpha

.ass Advanced SubStation Alpha
.srt Subripper
.sub Micro DVD / SubViewer
.sub + .idx VOBSub
.txt Micro DVD / TMPlayer / MPL2
.mpl MPL2
.smi Sami
.jss JACOSUB
.ttml TTML
.txt / .sub DVDSUBTITLE
.lrc -

Internal Subtitles

Extension Specification
.mkv VOBSub
.mkv ASS / SSA / TEXT
.dat, .mpg, .mpeg, .vob DVD Subtitle
.mp4 DVD Subtitle, TEXT

Supported DVI Resolutions

When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not
supplied), you can refer to the following resolution information.

56Hz 60Hz 66Hz 70Hz 72Hz 75Hz

640x400 x
640x480 x x x x
800x600 x x x x x
832x624 x
1024x768 x x x x x
1152x864 x x x
1152x870 x
1280x768 x x
1360x768 x
1280x960 x x
1280x1024 x x
1400x1050 x x
1440x900 x x
1600x1200 x
1680x1050 x
1920x1080 x

English - 22 -
 Internet Speed Test
Connectivity
Highlight Internet Speed Test and press the OK
Wired Connectivity button. TV will check the internet connection bandwidth
To Connect to a Wired Network and display the result when complete.
• You must have a modem/router connected to an Advanced Settings
active broadband connection. Highlight Advanced Settings and press the OK
• Connect your TV to your modem/router via an button. On the next screen you can change the IP and
Ethernet cable. There is a LAN port at the rear DNS settings of the TV. Highlight the desired one and
(back) of your TV. press Left or Right button to change the setting from
Automatic to Manual. Now you can enter the Manual
IP and / or Manual DNS values. Select the related item
1 in the drop down menu and enter the new values using
the numeric buttons of the remote. Highlight Save and
press the OK button to save settings when complete.
Wireless Connectivity
To Connect to a Wireless Network
2 The TV cannot connect to the networks with a hidden
SSID. To make your modem’s SSID visible, you should
change your SSID settings via the modem’s software.

1
3

1. Broadband ISP connection

2. LAN (Ethernet) cable
3. LAN input on the rear side of the TV
To configure wired settings refer to the Network
section in the Settings menu.
• You might be able to connect your TV to your LAN
depending on your network’s configuration. In such
a case, use an Ethernet cable to connect your TV
directly to the network wall outlet.

1. Broadband ISP connection

1 A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimized for smoother
and faster HD video streaming, file transfers and
wireless gaming.
• The frequency and channel differ depending on the area.
• The transmission speed differs depending on the
distance and number of obstructions between the
2
transmission products, the configuration of these
1. Network wall socket products, the radio wave conditions, the line traffic
and the products that you use. The transmission may
2. LAN input on the rear side of the TV
also be cut off or may get disconnected depending
Configuring Wired Device Settings on the radio wave conditions, DECT phones or any
Network Type other WLAN 11b appliances. The standard values of
the transmission speed are the theoretical maximum
The Network Type can be selected as Wired Device,
values for the wireless standards. They are not the
Wireless Device or Disabled, in accordance with the
actual speeds of data transmission.
active connection to the TV set. Select this as Wired
Device if you are connecting via an Ethernet cable. • The location where the transmission is most effective
differs depending on the usage environment.

English - 23 -
• The Wireless feature of the TV supports 802.11 a,b,g Afterwards, connect your mobile device to the router and
& n type modems. It is highly recommended that you then activate the sharing software on your mobile device.
should use the IEEE 802.11n communication protocol Then, select files that you want to share with your TV.
in order to avoid any possible problems while watching If the connection is established correctly, you will be
videos. able to access the shared files installed on your mobile
• You must change your modem’s SSID when there are device via the AVS(audio video sharing) feature of your
any other modems around with the same SSID. You TV.
can encounter connection problems otherwise. Use a Highlight the AVS option in the Sources menu and
wired connection if you experience problems with a press OK, available media server devices in the
wireless connection. network will be displayed. Select your mobile device
Configuring Wireless Device Settings and press the OK button to continue.
Open the Network menu and select Network Type as • If available, you can download a virtual remote
Wireless Device to start connection process. controller application from the server of your mobile
device application provider.
Highlight Scan Wireless Networks option and press OK
to start a search for available wireless networks. All found Note: This feature may not be supported on all mobile
networks will be listed. Highlight your desired network devices.
from the list and press OK to connect. Wake ON
Note: If the modem supports N mode, you should set N Wake-on-LAN (WoL) and Wake-on-Wireless LAN
mode settings. (WoWLAN) are standards that allow a device to be
If the selected network is password-protected, enter the turned on or woken up by a network message. The
correct key by using the virtual keyboard. You can use this message is sent to the device by a program executed
keyboard via the directional buttons and the OK button on a remote device connected to the same local area
on the remote control. network, such as a smartphone.
Wait until the IP address is shown on the screen. Your TV is WoL and WoWLAN compatible. This feature
This means that the connection is now established. To might be disabled during the First Time Installation
disconnect from a wireless network, highlight Network process. To enable this feature set the Wake On option
Type and press Left or Right buttons to set as in the Network menu as On. It is necessary that both
Disabled. the device, from which the network message will be
sent to the TV, and the TV are connected to the same
If your router has WPS, you can directly connect to the network. Wake On feature is only supported for Android
modem/router without entering a password or adding OS devices and can only be used via YouTube and
the network first. Highlight Press WPS on your wifi Netflix applications.
router option and press OK. Go to your modem/router
device and press the WPS button on it to make the In order to use this feature the TV and the remote
connection. You will see a connection confirmation on device should be connected at least once while the
your TV once the devices have paired. Select OK to TV is on. If the TV is powered off, the connection
proceed. No further configuration is required. should be re-established, the next time it is switched
on. Otherwise this feature will be unavailable. This
Highlight Internet Speed Test and press the OK button does not apply, when the TV is switched into the
to check your internet connection speed. Highlight standby mode.
Advanced Settings and press the OK button to open
the advanced setting menu. Use directional and numeric The performance of some devices in the market, may
buttons to set. Highlight Save and press the OK button vary due to the software architecture. In order to use
to save settings when complete. Wake On feature with a better performance, please
make sure that your device has latest firmware version.
Other Information
If you want your TV to consume less power in standby
The status of the connection will be displayed as mode, you can disable this feature by setting the Wake
Connected or Not Connected and the current IP On option as Off.
address, if a connection is established.
Wireless Display
Connecting to your mobile device via WLAN
Wireless Display is a standard for streaming video and
• If your mobile device has WLAN feature, you can sound content. This feature provides the ability to use
connect it to your TV via a router, in order to access your TV as wireless display device.
the content in your device. For this, your mobile device
must have an appropriate sharing software. Using with mobile devices
Connect your TV to your router following the steps There are different standards which enable sharing of
mentioned in the sections above. screens including graphical, video and audio content
between your mobile device and TV.
English - 24 -
Plug the wireless USB dongle to TV first, if the TV image transfer or audio streaming to the TV will not
doesn’t have internal WLAN feature. be possible.
Then press the Source button on the remote and The images sent by mobile device will be displayed
switch to Wireless Display source. on the TV without confirmation request, if the image
A screen appears stating that the TV is ready for file is suitable. You can also save the image file to a
connection. connected USB memory drive or set as boot logo, if
this feature is supported and the file is suitable. Press
Open the sharing application on your mobile device. the Exit button to terminate displaying the image.
These applications are named differently for each
brand, refer to the instruction manual of your mobile The audio will be routed through the speakers of
device for detailed information. the TV, after confirmation is given. To start audio
streaming unpair the device from your TV if it is paired
Scan for devices. After you select your TV and connect, with your TV previously. After pairing is completed, a
the screen of your device will be displayed on your TV. confirmation message will be displayed asking whether
Note: This feature can be used only if the mobile device you want to start audio streaming from your mobile
supports this feature. If you experience problems with the device. Select Yes and press the OK button on the
connection check if the operating system version you use
remote of the TV. If the connection is succeeded, all
supports this feature. There may be incompatibility problems
with the operating system versions which are released after audio will be routed through the speakers of the TV. A
the production of this TV. Scanning and connecting processes symbol will appear on the upper side of the TV screen
differ according to the programme you use. as long as the audio streaming connection is active. To
Connecting Bluetooth Devices (optional) terminate the audio streaming, you should turn off the
Bluetooth connection of your mobile device.
Your TV supports Bluetooth wireless connection
technology too. A pairing is required before using Close all running applications and all the menus on
Bluetooth devices with the TV set. You should do the the TV for a trouble-free transfer. Only image files with
following to pair your device with the TV: sizes smaller than 5 MB and in the following file formats
are suitable; .jpg, .jpeg, .png, bmp. If a file sent by the
• Set the device to pairing mode mobile device does not suit these requirements, it will
• Start device discovery on the TV not be displayed on the TV.
Note: Refer to the user manual of the Bluetooth device to learn Note: Wireless devices may operate within the same radio
how to set the device to pairing mode. frequency range and may interfere with one another. To
improve the performance of your wireless device place it at
You can connect audio devices or remote controllers
least 1 meter away from any other wireless devices.
to your TV using the Bluetooth wireless technology.
Unplug or switch off any other connected audio Connectivity Troubleshooting
device in order for wireless connection feature to Wireless Network Not Available
work correctly. For audio devices you should use • Ensure that any firewalls of your network allow the
the Bluetooth option in the Settings>Sound menu, TV wireless connection.
for remote controllers the Smart Remote option
in the Settings>System>More menu. Select the • Try searching for wireless networks again, using the
menu option and press the OK button to open the Network menu screen.
related menu. Using this menu you can discover and If the wireless network does not function properly, try
connect the devices that use the Bluetooth wireless using the wired network in your home. Refer to the
technology and start to use them. Follow the on- Wired Connectivity section for more information on
screen instructions. Start the device discovery. A list the process.
of available Bluetooth devices will be displayed. Select If the TV does not function using the wired connection,
the device you want to connect from the list and press check the modem (router). If the router does not have a
the OK button to connect. If “Device connected” problem, check the internet connection of your modem.
message is displayed, the connection is successfully
established. If the connection fails try it again. Connection is Slow
Image transfer and audio streaming See the instruction book of your wireless modem to
get information on the internal service area, connection
You can also use Bluetooth connection to transfer speed, signal quality and other settings. You need to have
images or stream audio from your mobile device to a high speed connection for your modem.
your TV.
Disruption during playback or slow reactions
Pair the mobile device and the TV as described before. You could try the following in such a case:
Start a device search in your hand-held device. Select
Keep at least three meters distance from microwave
your TV from listed devices. Confirm the request for
ovens, mobile telephones, Bluetooth devices or any
connection on your TV screen and do the same on
your hand held device screen. If no pairing is done,
English - 25 -
other WLAN compatible devices. Try changing the active and press OK to continue. The media browser will
channel on the WLAN router. then be displayed.
Internet Connection Not Available / Audio Video Refer to the Media Browser menu section for further
Sharing Not Working information on file playback.
If the MAC address (a unique identifier number) of your If a problem occurs with the network, switch your
PC or modem has been permanently registered, it is television off at the wall socket and back on again.
possible that your TV might not connect to the internet. Trick mode and jump are not supported with the Audio
In such a case, the MAC address is authenticated Video Sharing feature.
each time when you connect to the internet. This is a PC/HDD/Media Player or any other devices that are
precaution against unauthorized access. Since your compatible should be used with a wired connection for
TV has its own MAC address, your internet service higher playback quality.
provider cannot validate the MAC address of your TV.
For this reason, your TV cannot connect to the internet. Use a LAN connection for quicker file sharing between
Contact your internet service provider and request other devices like computers.
information on how to connect a different device, such Note: There may be some PC’s which may not be able to
as your TV, to the internet. utilize the Audio Video Sharing feature due to administrator
and security settings (such as business PC’s).
It is also possible that the connection may not be
available due to a firewall problem. If you think this Apps
causes your problem, contact your internet service You can access the applications installed on your TV
provider. A firewall might be the reason of a connectivity from Apps menu. Highlight an app and press OK to
and discovery problem while using the TV in Audio launch.
Video Sharing mode or while browsing via Audio Video In order to manage the apps installed on your TV, add
Sharing feature. new apps from the market or to see all available apps
Invalid Domain in full screen mode highlight the Add More option
Ensure that you have already logged on to your PC with and press OK. Using this menu option you can add
an authorized username/password and also ensure an installed app to Home menu, launch or remove it.
that your domain is active, prior to sharing any files in Removed apps will no longer be accessible from Apps
your media server program on your PC. If the domain menu. You can also add new apps from the market.
is invalid, this might cause problems while browsing In order to enter the market highlight the shopping
files in Audio Video Sharing mode. basket logo located on the upper left side of the screen
and press OK. Available apps in the market will be
Using Audio Video Sharing Network Service displayed. Use directional buttons to highlight an app
Audio Video Sharing feature uses a standard that eases and press OK. Highlight Add to Apps option and press
the viewing process of digital electronics and makes them OK again to add the selected app to Apps menu.
more convenient to use on a home network. For quick access to Add More menu you can press the
This standard allows you to view and play photos, music Internet button on the remote, if this button is available.
and videos stored in the media server connected to your Notes:
home network.
Possible application dependent problems may be caused by
1. Server Software Installation the content service provider.
The Audio Video Sharing feature cannot be used if the Third party internet services may change, be discontinued or
server programme is not installed onto your PC or if restricted at any time.
the required media server software is not installed onto
Freeview Play Platform
the companion device. Prepare your PC with a proper
server programme. Freeview Play platform provides catch-up TV and
2. Connect to a Wired or Wireless Network On Demand services. Simply press the Freeview
Play button on your remote control to connect to the
See the Wired/Wireless Connectivity chapters for
Freeview Play platform.
detailed configuration information.
The Freeview Play platform can also be accessed from
3. Enable Audio Video Sharing
the Home and Apps menus. Press Menu button and
Enter the Settings>System>More menu and select Home or Apps. Then highlight Freeview Play
enable the AVS option. and press the OK button.
4. Play Shared Files via Media Browser You will have to agree to the terms and conditions for
Highlight the AVS option in the Sources menu by using Freeview Play services first if you did not agree them
the directional buttons and press OK. Available media during the First Time Installation. Highlight Yes and
server devices in the network will be listed. Select one press OK on the remote to confirm and proceed.

English - 26 -
Integrated TV Player applications will be displayed. Enter the address of a website(URL) into the search/
Select one and press the OK button. Then select a address bar and highlight the Submit button on the
content that you want to play back and press the OK virtual keyboard and press the OK button to visit the
button to watch. site.
Catch-up contents can also be accessed and played Enter keyword/s into the search/address bar and
back directly from the TV Guide. Refer to the section highlight the Submit button on the virtual keyboard
Electronic Programme Guide for more information. and press the OK button to start a search for the
Requirements related websites.
The Freeview Play services may only be used if the Highlight a Speed Dial thumbnail and press the OK
following requirements are fulfilled: button to visit the related website.
• Connecting the TV to the internet. A minimum broad- Your TV is compatible with USB mice. Plug your mouse
band speed of 2Mbps is required for proper operation or wireless mouse adaptor into the USB input of your
of catch up and on demand services. TV for easier and quicker navigation.
• Agreeing to the terms and conditions of Freeview Some web pages include flash content. These are not
Play supported by the browser.
Note: Freeview Play platform usage will count towards any Your TV does not support any download processes
monthly broadband data allowance. Only selected channels from the internet via the browser.
provide 7-day catch up.
All sites on the internet might not be supported.
Internet Browser According to the site; content problems may occur.
To use the internet browser, enter the Apps menu first. In some circumstances video contents might not be
Then launch the internet browser application which able to be played.
has an orange coloured logo with earth symbol on it. HBBTV System
In the initial screen of the browser, the thumbnails of HbbTV (Hybrid Broadcast Broadband TV) is a new
the predefined (if any) links to web sites available will industry standard that seamlessly combines TV
be displayed as Speed Dial options along with the services delivered via broadcast with services delivered
Edit Speed Dial and the Add to Speed Dial options. via broadband and also enables access to Internet only
To navigate the web browser, use the directional services for consumers using connected TVs and set-
buttons on the remote or a connected mouse. To see top boxes. Services delivered through HbbTV include
the browser options bar, move the cursor to the top of traditional broadcast TV channels, catch-up services,
the page or press the Back/Return button. History, video-on-demand, electronic programme guide,
Tabs and Bookmarks options and the browser bar interactive advertising, personalisation, voting, games,
which contains previous/next buttons, the refresh social networking and other multimedia applications.
button, the address/search bar, the Speed Dial and HbbTV applications are available on channels where
the Vewd buttons are available. they are signalled by the broadcaster (currently various
channels on Astra broadcast HbbTV applications). The
To add a desired website to the Speed Dial list for
broadcaster marks one application as “autostart” and
quick access, move the cursor to the top of the page
this one is started by the platform automatically. The
or press the Back/Return button. The browser bar
autostart applications are generally launched with a
will appear. Highlight the Speed Dial - button and
small red button icon to notify the user that there is
press the OK button. Then select Add to Speed Dial
an HbbTV application on that channel. Press the red
option and press the OK button. Fill in the blanks for
button to open the application page. After the page is
Name and Address, highlight OK and press the OK
displayed you can go back to the initial red button icon
button to add. Whilst you are on the site you wish to
state by pressing the red button again. You can toggle
add to the Speed Dial list, highlight the Vewd button
between the red button icon mode and full UI mode
and press the OK button. Then highlight Add to Speed
of the application via pressing red button. It should
Dial option in the submenu and press the OK button
be noted that the red button switching capability is
again. Name and Address will be filled automatically
provided by the application and some application may
according to the site you are visiting. Highlight OK and
behave differently.
press the OK button to add.
If you switch to another channel while an HbbTV
You can also use the Vewd menu options to manage application is active (either in red button icon mode
the browser. Highlight the Vewd button and press the or full UI mode), the following scenarios can occur.
OK button to see available page specific and general • The application can continue running.
options.
• The application can be terminated.
There are various ways to search or visit websites
using the web browser.

English - 27 -
• The application can be terminated and another Start the Smart Center application. If all connections
autostart red button application can be launched. are configured properly, you will see your TV’s name on
HbbTV allows the applications to be retrieved both from your mobile device. If your TV’s name doesn’t appear
broadband or broadcast. The broadcaster may enable on the list, wait a while and tap on the Refresh widget.
both ways or one of them. If the platform does not have Select your TV from the list.
an operational broadband connection, the platform Mobile Device screen
can still launch applications transmitted on broadcast. On the main screen you can find tabs to access
The autostart red button applications generally provide various features.
links to other applications. The user then can switch The application retrieves actual channel list from TV
to other applications by using the links provided. first when it starts.
The applications should provide a way to terminate
themselves, usually Exit button is used for this. MY CHANNELS: The programmes of first four
channels from the channel list retrieved from the TV
HbbTV applications use keys on the remote control to are shown. You can change the listed channels. Press
interact with the user. When an HbbTV application is on the channel thumbnail and hold. A list of channels
launched, the control of some keys are owned by the will be displayed and you can choose your desired
application. For example, numeric channel selection channel to be replaced.
may not work on a teletext application where the
numbers indicate teletext pages. TV: You can watch content through the TV tab. In
this mode you can navigate through the channel list
HbbTV requires AV streaming capability for the retrieved from your TV and click on thumbnails to view
platform. There are numerous applications providing the detail pages.
VOD (video on demand) and catch-up TV services.
The user can use play, pause, stop, forward, and RECORDINGS: You can view your active recordings(if
rewind keys on the remote control to interact with the available) and reminders through this tab. To delete
AV content. any item, simply press on the delete icon found on
each row.
Note: You can enable or disable this feature from the
More menu in Settings>System menu. Depending on the EPG(Electronic programme guide): You can view
model of your TV and the selected country option in the the broadcast schedules of selected channel lists
First Time Installation this feature might be available in the through this tab. You can also navigate through
Settings>System>Privacy Settings menu instead of the channels by pressing on the selected channel on the
Settings>System>More menu.
EPG grid. Please note that updating / refreshing the
Smart Center EPG information may take a while depending on your
Smart Center is a mobile application running on iOS network and web service quality.
and Android platforms. With your tablet or phone, Note: Internet connection is required for WEB based EPG
you can easily stream your favourite live shows and information.
programmes from your smart TV. Also; you can launch SETTINGS: Configure the application to your liking.
your applications, use your tablet as a remote control You can change;
for your TV and share media files.
Auto-lock (Only in IOS): The screen of the device
Note: Being able to use all functions of this application automatically turns off after a certain amount of
depends on the features of your TV.
time. Default is off, which means the screen will
Getting Started always stay on.
To use Smart Center features, connections have to Auto-enable FollowMeTV: FollowMeTV function (if
be done properly. To get connected to your network available) will start automatically when this setting
wirelessly, plug in the WLAN dongle to one of the USB is enabled. Default is disabled.
ports if your TV doesn’t have internal WLAN feature. To
Auto-connection to TV: When enabled, your
be able to use internet based features, your modem/
mobile device will automatically connect to last
router must be connected to the internet.
connected TV and skips the TV search screen.
IMPORTANT: Make sure the TV and mobile device
Change TV (Only in IOS): Shows the currently
are connected to the same network.
connected TV. You can press on this setting to go to
For media sharing feature Audio Video Sharing option the “TV search” screen and change to a different TV.
should be enabled(if available). Press the Menu button
Edit custom channel list: You can edit your custom
on the remote, select Settings>System>More menu
channel list using this setting.
and press OK. Highlight AVS and change as Enabled.
Your TV is ready to connect to your mobile device now. Choose channel list source: You can choose the
Install the Smart Center application onto your mobile channel list source to be used in the application. The
device. options are “TV List” and “Custom List”. Additionally

English - 28 -
 you can activate “Remember my choice” option to Voice Recognition
set the selected channel list source as a constant You can tap on the Microphone( ) widget and
choice. In this case if the selected source is available manage your application, giving voice commands
it will be used in the application. such as “Volume Up/Down!”, “Programme Up/Down!”.
Version No: Displays the current version of the Note: This feature is only for android based devices available.
application.
Keyboard Page
Detail Page
The keyboard page can be opened in two ways; by
To open detail page tap on a programme. On the pressing the Keyboard( ) widget on the application
detail page screen you can get detailed information screen or automatically by receiving a command
of the programmes you select. There are “Details”, from the TV.
“Cast&Crew” and “Videos” tabs to find on this page.
Requirements
DETAILS: This tab provides summary and information
1. Smart TV
about the selected programme. Also there are links
to Facebook and twitter pages of the programme 2. Network connection
selected. 3. Mobile Device based on Android or iOS platform
CAST&CREW: Shows all the people contributed to (Android OS 4.0 or higher; IOS 6 or higher version)
the current programme. 4. Smart Center app.(to be found on online
VIDEOS: Provides videos on YouTube related to the application stores based on Android and iOS
selected programme. platforms)
Note: For some functions an internet connection may be 5. Router modem
required. 6. USB storage device in FAT32 format (required for
FollowMe TV Feature (if available) USB Recording feature, if available)
Tap on the FOLLOW ME TV widget located at the
bottom left of the screen of your mobile device to
change the layout for FollowMe TV feature.
Tap the play icon to start streaming of the content from
the TV to your mobile device. Available if your device
is in your routers operation range.
Mirror Mode
This mode of FollowMe TV feature is enabled by
default and allows streaming the content from any other
selected TV sources and Media Browser.
Notes:
Note that only digital(DVB-T/C/S) SD and HD channels are
supported.
Multilanguage audio support and subtitle on/off features are
not functional.
The streaming performance may change depending on the
quality of your connection.
Media Share Page
To access the Media Share widget tap on the Up-
arrow on the bottom left side of the screen.
If the Media Share widget is pressed, a screen is
displayed where you can select the media file type to
share with your TV.
Note: Not all image file formats are supported. This function
will not work if Audio Video Sharing feature is not supported.
Smart Remote Feature
You can use your mobile device as a remote control
for your TV once it has connected to the TV. To use
smart remote’s full features tap on the Up-arrow on
the bottom left side of the screen.

English - 29 -
Notes: the Alexa device and your TV will no longer have to be on
the same network.
For Android devices, Normal(mdpi), Large(hdpi) and Extra
Large(xhdpi) screen sizes are supported. Devices with 3” or After you have performed First Time Installation on your TV,
smaller screen sizes are not supported. launch the Smart Center application and pair it with your TV
again. Then tap on the Amazon logo on the main screen and
For iOS devices, all screen sizes are supported. check if you are logged in to your Amazon account, if not you
User interface of the Smart Center application is subject to might need to re-login and determine a Friendly Name again
change according to version installed on your device. for your TV in order to be able to continue to control your TV
with Alexa device.
Alexa Ready Feature (optional)
Example Commands
Alexa is Amazon’s cloud-based voice service available
on many voice controlled assistant devices. Your TV Here are some of the commands that you’ll be able
is compatible with and ready to be utilized with Alexa give to your Alexa-enabled TV:
devices. With this feature you can use your voice to
Command Function
control functions on your TV, such as turning on or off,
changing channel or input source, controlling volume, Alexa, turn on ‘FN’ Powers on the TV
and more. Alexa, turn off ‘FN’ Powers off the TV
Requirements Alexa, play ‘FN’ Starts media playback
The following requirements should be fulfilled: Alexa, pause ‘FN’ Pauses media playback
• Alexa Ready Smart TV Alexa, resume ‘FN’ Resumes media playback
• Amazon Alexa device Alexa, stop ‘FN’ Stops media playback
• A mobile device, such as your phone or tablet, with Advances media in fast
Smart Center and Amazon Alexa apps installed on it Alexa, fast forward on ‘FN’
forward mode
• Home network with WLAN capabilities Alexa, rewind on ‘FN’ Rewinds media
• Amazon account Alexa, set the volume of Sets the volume to the
How to control your TV with an Amazon Alexa ‘FN’ to 50 specified level
Device Alexa, turn the volume up Increases volume by 10
• Connect your TV and mobile device to the same on ‘FN’ units
network with internet access as your Alexa device. Alexa, turn the volume Decreases volume by
• Pair the Smart Center app with your TV. Then tap on down on ‘FN’ 10 units
the Amazon logo on the main screen of the Smart Alexa, mute ‘FN’ Mutes sound
Center app. You will be directed to a registration Alexa, unmute ‘FN’ Unmutes sound
page. Follow the on-screen instructions to complete
your TV’s registration and linking process. The TV switches to the
Alexa, change the input to
input source with the spec-
• You will be asked to determine a name for your TV, “input_name” on ‘FN’
ified name (e.g., HDMI 1)
called ‘Friendly Name’(FN). A ‘Friendly Name’ is a
The TV switches to the
name that reminds you of your TV, such as ‘Living
Alexa, change channel to channel with the specified
Room TV’, ‘Kitchen TV’, ‘Dining Room TV’, etc. "channel_number" on ‘FN’ number (e.g., channel
Choose an easy-to-say name. You will say this name 200)
to tell Alexa which TV to control.
The TV switches to the
• Pair the Alexa app on your mobile device with the Alexa, change channel to
channel with the specified
“channel_name" on ‘FN’
Alexa device, search for the skill of your TV by the name
brand name and enable it in the Alexa app. For more The TV switches to the
information, you can refer to the user manual of the Alexa, channel up on ‘FN’ next higher channel, if any
Alexa device. available
• Ask Alexa to discover your devices. Say, “discover The TV switches to the
Alexa, channel down
my devices,” or select Discover Devices in the next lower channel, if any
on ‘FN’
related section of the Alexa app. available

Once the discovery process is complete, you will be Alexa, next channel on
The TV switches to the
able to control your TV by voice. next channel on the
‘FN’
channel list
Note:
Make sure that the devices are connected to the same network. FN is the abbreviation for ‘Friendly Name’.
But once these pairing and linking processes are completed

English - 30 -
 DVD Mode (optional)
Safety Information
CAUTION
DVD Player is a class 1 laser product. However this
product uses a visible laser beam which could cause
hazardous radiation exposure. Be sure to operate the
player correctly as instructed.

CLASS 1 • Do not use solvents such as benzine, thinner,

commercially available cleaners or anti-static spray
LASER PRODUCT intended for vinyl LPs.

RISK OF ELECTRIC SHOCK

How to Watch a DVD
The lightning flash with arrowhead symbol, within an
When placing a disc into the loader, labelled side of
equilateral triangle, is intended to alert the user to the
the disc should be on the front.
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude When TV set is turned on, first switch to DVD source by
to constitute a risk of electric shock of persons. using the Source button on the remote control. Press
play on the remote control, or directly press play button
The exclamation point within an equilateral triangle is
on the side panel. If there is no disc inside the loader,
intended to alert the user to the presence of important
place a DVD first and press play.
operating and maintenance (servicing) instructions in
the literature accompanying the appliance. Note: If you switch to another source by pressing Source or
Programme +/- buttons on the remote control, DVD playback
will be paused automatically. You should press Play button and
Notes on Discs resume the playback manually when you switch to DVD mode.

On handling discs
DVD Control Panel Buttons
• To keep the disc clean, handle the disc by its edge.
Do not touch the surface. / (Play / Pause)
• Do not stick paper or tape on the disc. Plays/pauses the disc. When DVD menu (root menu) is
active, this button functions as “button select” (selects
• If the disc is contaminated with any substance like
the highlighted item in menu) if this is not prohibited
glue remove before using it.
by the disc.
/ (Stop / Eject)
Stop playing disc / Eject or Load the disc.
Note:
You cannot eject the disc via the remote control.
While playing a file, you should press Stop button three
times to eject.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature can rise General Playback
quickly and damage the disc.
Basic Play
• After playing, store the disc in its case. 1. Press the Standby button
On cleaning 2. Insert a disc into the loader.
• Before playing, clean the disc with a cleaning cloth. The disc will be automatically loaded and play will
Wipe the disc from the centre out. commence if the disc does not have any menus
recorded on it.
A menu may appear on the TV screen after a few
moments or the film may start immediately. This
behaviour depends on the disc content and may
change.
Note: Step 3 and 4 are available only when a menu is recorded
on the disc.

English - 31 -
3. Press Down / Up / Left / Right or the numeric • A damp DVD disc or condensation may affect the
button (s) to select the preferred title. equipment. Wait for 1 to 2 hours in Stand-by to dry
4. Press OK to confirm the selected item. the equipment.
The played item may be a motion picture, a still picture Disc does not play
or another submenu depending on the disc content. • No disc in the machine. Place a disc into the loader.
For your reference • Disc incorrectly loaded.
If an action corresponding to a button is prohibited the Note: Ensure that the DVD disc is in the tray with the label
facing forward.
“ ” symbol appears.
• Wrong type of disc. The machine cannot play CD-
Notes on Playback ROMS etc. The region code of the DVD must match
1. No sound will be heard during fast forward or the player.
rewind.
Wrong OSD language
2. No sound will be heard during slow motion play.
3. Reverse slow motion play may not be available • Select the language in the set-up menu.
depending on the DVD content. • The language for the sound or subtitles on a DVD
4. In some cases, the subtitle language is not cannot be changed.
changed immediately to the selected one. • Multilingual sound and/or subtitles not recorded on
5. When the preferred language is not selected even the DVD.
after pressing the button several times, it means • Try to change the sound or subtitles using DVD’s title
that the language is not available on the disc. menu. Some DVD’s do not allow the user to change
6. When the player is restarted or the disc is these settings without using the disc’s menu
changed, the subtitle selection is automatically • These functions are not available on the DVD.
changed back to the initial settings.
7. If a language is selected, not supported by the No picture
disc, the subtitle language will automatically be • Make sure you have pressed the correct buttons on
set to the disc’s priority language. the remote control. Try once more.
8. Usually a circulation will happen while switching to No sound
another subtitle, that is you can cancel the subtitle • Check if volume is set to an audible level.
by pressing the Text button a number of times until
• Make sure the sound isn’t turned off by mistake.
“Subtitles Off” appears on the screen.
9. When the power is turned on or the disc is Distorted sound
removed, the language heard is the one selected • Check that the appropriate listening mode setting
at the initial settings. If this language is not is correct.
recorded on the disc, only the available language If nothing works
on the disc will be heard.
If you have tried the above solutions and none seem
10. Some DVDs may not contain root and/or title
to work, try switching your TV-DVD off and on again.
menus.
If this does not work, contact your supplier or TV-DVD
11. Reverse stepping is not available.
repair technician. Never attempt to repair a defective
12. For your convenience:
TV-DVD yourself.
If you attempt to enter a number greater than
the total time of the current title, the time search
box disappears and “ Input Invalid” message
appears on upper-left corner of screen.
13. Slide Show is disabled when the ZOOM mode is on.

DVD Troubleshooting
Poor picture quality (DVD)
• Make sure the DVD disc surface is not damaged.
(Scratch, fingerprint etc.)
• Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean your
disc properly.
• Ensure that the DVD disc is in the tray with the label
facing forward.

English - 32 -
Disc Types Compatible with This Unit

Disc Types Recording Disc Max. Playing

Characteristics
(Logos) Types Size Time
DVD Single- • DVD contains excellent sound and video
Audio due to Dolby Digital and MPEG-2 System.
sided; 240 min.
+ 12 cm • Various screen and audio functions can
Double-
Video be easily selected through the on screen
sided; 480 min. menu.
AUDIO-CD • An LP is recorded as an analog signal
with more distortion. CD is recorded as a
Audio 12 cm 74 min. digital signal with better audio quality, Iess
distortion and less deterioration of audio
quality over time.

MP3-CD It depends • MP3 is recorded as a digital signal with

Audio better audio quality, less distortion and
12 cm on MP3
(xxxx.mp3) less deterioration of audio quality over
quality. time.

PICTURE-CD It depends
Video • JPEG is recorded as a digital signal with
12 cm on JPEG
(still picture) better picture quality over time.
quality.
For proper operation, only 12 cm discs must be used.

Specifications

DVD: SS/SL 4.7” (DVD-5) CD-DA

Types of Discs SS/DL 4.7” (DVD-9) CD-R
Supported DS/SL 4.7” (DVD-10) CD-RW
DS/DL 4.7” (DVD-18) MP-3/JPEG
MPEG-2 Video Standard Decoding (MPEG-1 supported)
Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC) pixels
Video Type 50 and 60 Hz frame refresh rates (PAL & NTSC)
Digital bit-stream processing rate up to 108Mbits/sec
Line resolution more than 500 lines
MPEG Multichannel Decoding
Audio Type
LPCM
Analog Outputs:
Audio Output
24 bit /48, 44.1kHz down-sampling DAC

English - 33 -
Overview of the Remote Control (if DVD is available)

1. Standby
2. Source selection
20
3. Numeric buttons
4. Audio language selection
5. TV Menu
6. Volume Up / Down
19 7. Time
8. Navigation buttons
9. OK / Select
10. Back / Previous menu
11. Coloured buttons;
Red button - Zoom
Green button - Repeat
Yellow button - Root
Blue button - Title
12. Rewind
13. Pause
14. Play
15. Stop
16. Fast forward
17. Exit
18. DVD menu
19. Subtitle language selection
8541 20. Mute

English - 34 -
General DVD Operation (if DVD is available)
You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote
control. Below are main functions of commonly used remote control buttons.

Buttons DVD Playback Movie Playback Picture Playback Music Playback

Play Play Play Play

Pause Pause Pause Pause

Stop Stop Stop Stop

Skip backward/ Skip backward/

/ Rotate Skip backward/forward
forward forward

/ Highlights a menu item / Shifts the zoomed picture up or down (if available).

/ Rapid advance / Rapid reverse

GUIDE Displays time / Views main setup menu

INFO Time counter mode selection (during playback). Press repeatedly to switch between modes.
Press Language button to change the
LANGUAGE X X
audio language.
MENU Displays TV menu.
OK Enter / View / Play
GREEN BUTTON Displays repeat options.
RETURN/BACK Returns back to the previous menu (if available).
YELLOW BUTTON Goes back to the root folder (if available).
Press Text button to change the subtitle
TEXT X X
language or turn off the subtitles.
Displays disc menu Displays disc menu
BLUE BUTTON X X
(if available). (if available).
RED BUTTON Zooms picture. Press repeatedly to switch between zoom options.

Other Functions – Button Combinations (During playback)

+ Slow forward

( + )+ Sets slow forward speed

+ Sets rapid advance speed

+ Sets rapid reverse speed

+ Confirms stop command

(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to switch
one digit titles (example: to select 5, press 0 and 5).

English - 35 -