NOTES AND SPECIFICATIONS

1. GENERAL
1.1 ALL MATERIAL AND WORKMANSHIP MUST COMPLY
WITH THE REQUIREMENTS OF THE LATEST
RELEVANT SANS SPECIFICATIONS.
1.2 ALL DIMENSIONS ARE IN MILLIMETERS.
(UNLESS OTHERWISE SPECIFIED)
1.3 DO NOT SCALE FROM THESE DRAWINGS.
1.4 ALL DIMENSIONS MUST BE CHECKED AND APPROVED
ON SITE.
1.5 ALL CONSTRUCTION TO BE DONE IN ACCORDANCE
WITH THE STANDARD SPECIFICATIONS FOR MUNICIPAL
CIVIL ENGINEERING WORKS, THIRD EDITION, 2005
AND THE STANDARD CTMM DETAIL DRAWINGS
1.6 THESE DRAWINGS MUST BE READ IN CONJUNCTION
WITH THE ARCHITECTS DRAWINGS.(IF APPLICABLE)
2. CONCRETE
2.1 REINFORCED CONCRETE WORK SHALL BE IN STRICT
ACCORDANCE WITH SECTIONS 702, 703 AND 704
OF THE STANDARD SPECIFICATIONS FOR MUNICIPAL
CIVIL ENGINEERING WORKS, 3rd EDITION, 2005.
2.2 ALL EXCAVATIONS FOR BASES AND FOOTINGS MUST
BE INSPECTED AND APPROVED IN WRITING BY THE
ENGINEER BEFORE CONCRETE IS PLACED.
2.3 REINFORCEMENT AND FORMWORK MUST BE
INSPECTED AND APPROVED IN WRITING BY THE
ENGINEER BEFORE CONCRETE IS PLACED.

3. STEELWORK
3.1 STRUCTURAL STEELWORK SHALL BE IN STRICT
ACCORDANCE WITH SECTION 809 OF THE
STANDARD SPECIFICATIONS FOR MUNICIPAL
CIVIL ENGINEERING WORKS, 3rd EDITION, 2005
3.2 STRUCTURAL STEEL SHALL BE GRADE 300W UNLESS
OTHERWISE INDICATED OR SPECIFIED.
3.3 COLD FORMED SECTIONS SHALL BE MADE FROM
COMMERCIAL QUALITY STEEL UNLESS OTHERWISE
SLIDING GATE DETAIL SPECIFIED.
3.4 HOLDING DOWN BOLTS SHALL BE OF THE GRADE
SPECIFIED ON THE DRAWINGS.
3.5 PAINTING OF STRUCTURAL STEELWORK SHALL BE
IN STRICT ACCORDANCE WITH THE REQUIREMENTS
GATEPOSTS FOR SLIDING GATE DETAIL OF SECTION 806 OF THE STANDARD SPECIFICATIONS.
NOTE: THE RATES TENDERED FOR STRUCTURAL
STEELWORK SHALL BE DEEMED TO INCLUDE FOR
PAINTING AS SPECIFIED IN SECTION 806 OF THE
STANDARD SPECIFICATIONS, FOR MUNICIPAL CIVIL
ENGINEERING WORKS, 3rd EDITION, 2005.
3.6 "W" AND "H" INDICATE THE WIDTH OF THE GATE
AND HEIGHT OF THE PALISADE FENCE RESPECTIVELY.
VALUES FOR "W" AND "H" WILL BE SHOWN ON THE
DETAIL DRAWINGS, IN THE SCHEDULE OF QUANTITIES
OR INDICATED BY THE ENGINEER.

X X

AMENDMENTS
NR. DATE APPROVED DESCRIPTION PAR.

FRONT ELEVEATION DESIGNED DRAWN

J. CRONJE Pr Tech Eng.
TYPICAL DOUBLE SWING GATE SIGNATURE:......................................................................... DATE:....................................
S. AUDIE

DESIGN CHECKED BY INFRASTRUCTURE TECHNICAL INFORMATION

S. NAIDOO Pr Tech Eng. MANAGEMENT
D.J. CHALMERS

Y SIGNATURE:......................................................................... DATE:.................................... SIGNATURE:......................................................................... DATE:....................................

CITY OF TSHWANE
ROADS AND TRANSPORT DEPARTMENT
GROUP HEAD DIVISIONAL HEAD
Mr Letlonkane P. (Pheko) Mr Marven K Tlhagale
Y P.O. BOX 1409 P.O. BOX 1409
PRETORIA PRETORIA

SECTION X-X 0001

DRAWING RECOMMENDED BY DIVISIONAL HEADS
0001

TRANSPORT INFRASTRUCTURE TRANSPORTATION PLANNING

DESIGN AND CONSTRUCTION
DIVISIONAL HEAD DIVISIONAL HEAD
Mr K Tlhagale (Marven ) Mr L. Swanepoel (Lourens )
DETAIL A SIGNATURE:..................................................... SIGNATURE:.....................................................

DATE:................................................................. DATE:.................................................................

DRAWING APPROVED BY GROUP HEAD

Mr Letlonkane P. (Pheko)

SIGNATURE:............................................................................. DATE:......................................................

LOCATION OF PROJECT:

TYPICAL STANDARD
DETAILS
TYPICAL SECTION THROUGH DETAIL C DETAIL D
DESCRIPTION OF PROJECT

AMENDMENTS

CONCRETE BEAM (FRONT ELEVATION) (BACK ELEVATION) FENCES AND GATES

STEEL PALISADE FENCING

SECTION Y-Y DETAIL B CONTRACT No. : PROJECT No. :

DATE : SCALE : ORIGINAL PAPER SIZE:

09 MARCH 2021 NOT TO SCALE A1

DRAWING NO. SHEET NO:
0
STD014 2 OF 4 REVISION

Q:\Roads & Stormwater\Information Management\DETAILPLANNE\Tshwane P & S Standard Detail Drawings\AutoCadSept2020\DWG\STD0014_sh2of4.dwg, 3/9/2021 11:23:53 AM