SAFETY DATA SHEET

ASMACO 2500
DESCRIPTION:
ASMACO 2500 is a high-performance, single-component acetic cure silicone sealant designed for construction and glazing applications. Upon
exposure to moisture, it forms a flexible elastomeric seal, offering excellent adhesion to nonporous substrates such as glass, ceramic tiles, and
aluminum, it ensures long-lasting durability in various environmental conditions.

COVERAGE RATE
The approximate linear meter sealant consumption per liter can
be estimated from the following formula:
WxD
1000
= Sealant Consumption per linear meter per liter.
Where: W = Joint Width (mm), D = Joint Depth (mm)
Joint Size in mm Liters/meter Run
4x4 0.016
6x6 0.036

PACKAGING / SUPPLYING

ASMACO 2500 available in 280 g Cartridge

(24 Cartridges / Carton)

METHOD OF APPLICATION
KEY PERFORMANCE PROPERTIES
Preparation: Thoroughly remove all residual dirt and old sealant.
 Easy to use one-component type Wipe the surface with a white cloth soaked in solvent to eliminate
 Cures at room temperature under ambient humidity conditions grease and dirt. Immediately wipe with another clean cloth to
 Outstanding adhesiveness to many nonporous substrates, remove residual solvent and dirt.
including Glass, Glazed Ceramics, Aluminium, Masonry. Masking: Use masking to achieve a clean and neat appearance.
 Gunn ability at low (+5°C) and high (+40°C) temperatures Protect surrounding areas from excess sealant to reduce cleanup.
 Wide service temperature ranges from -20°C to 110°C Applying:
 Outstanding adhesiveness to a range of plastics Cut the nozzle at a 45° angle and attach it to the cartridge, placing
 Recommended to apply for adhesion test on your plastic surface it in the caulking gun. Apply the sealant at the base of the joint,
prior to beginning work. ensuring complete filling and wetting on both sides. Avoid simply
laying a bead on the surface, as the sealant needs to penetrate the
AREAS OF APPLICATION
joint.
 Suitable for various applications in construction and industrial Tooling: Immediately tool the surface of the joint after applying the
settings sealant for a smooth, even finish. Avoid using soap or water as
 Versatile use in art & craft projects requiring strong adhesion tooling aids. After a skin has formed, refrain from disturbing the
 Ideal for DIY projects including home repairs, crafting, and hobby joint for 48 h.
applications due to its ease of use and versatility Curing: The curing time can take longer at lower temperatures,
 General purpose sealing and bonding lower humidity or by low volume of air exchange.
 Effective for gap filling
QUALITY & CARE
 Suitable for sealing gaps between door and window frames
 Works well on aluminium, steel, painted metal, UPVC and plastics All products originating from ANCHOR ALLIED FACTORY
LLC Sharjah, UAE. facility is manufactured under a management
system independently certified to conform to the requirements of
CLEAN UP the quality, environmental and occupational health & safety
Clean all the equipment immediately with ANCHOR CLEANER 1 standards ISO 9001, and ISO 14001.
Rev 01, TDS_ASMACO 2500 GCC 0224

Page 1 of 2
 SAFETY DATA SHEET
STORAGE & SHELF LIFE HEALTH & SAFETY

ASMACO 2500 Store in cool place under cover, out of direct Protective clothing such as gloves and goggles should be worn
sunlight and protect from extreme temperatures. In tropical while applying ASMACO 2500 In case the material splashes to
climate the product must be stored in air – conditioned the skin or eyes wash the same with fresh water immediately.
environment (< 25° C). The shelf life is up to 11 months in In critical cases seek medical assistance.
unopened conditions if stored as per guidelines.

TECHNICAL SPECIFICATIONS

PROPERTIES TYPICAL VALUES TEST STANDARDS

Color Colors, Clear, White, Black, Cream, Grey, Beige, Brown & Others —
Consistency Thixotropic (Non Sag) —
Curing Mechanism Acetic —
Density, g/m³ 0.93 ±0.02 ASTM D 1475
Skin OverTtime 10 min (RT) ASTM C 920 -18 / ASTM C 679 - 15
Curing rate > 2 mm/day (23°C and 50% R.H) —
Hardness Shore A 15 - 21 ASTM D 2240
Adhesion & Cohesion No, Cracks, Loss of Adhesion ASTMC 920 -18/ASTM C 719 -14
DUMBLE TEST
Elongation at Break ≥ 600 % ASTM D 412
E 100 Modulus ≥0.30 N/mm² ASTM D 412
Tensile Strength >1.00 N/mm² ASTM D 412
Listed are based on laboratory-controlled tests. All values given are subject to a tolerance of 5-10%.

Rev 01, TDS_ASMACO 2500 GCC 0224

Page 2 of 2