40Vmax series

Digital
Durability Communication
High Power
Combination Hammer
HR001G / HR002G / HR003G / HR004G

Recipro Saw
JR001G

Impact Wrench
TW001G Driver Drill
DF001G

Hammer Driver Drill

HP001G
Impact Driver
TD001G

Angle Grinder
GA003G / GA004G / GA005G /
GA011G / GA012G / GA013G
Circular Saw
HS003G / HS004G

2
/ HR003G / HR004G

3
 Tool Battery Battery Charger
Digital communication
XGT is a new system with its own
tools, batteries, and chargers. A
combination of innovative tool
design and higher output batteries
provide a genuine solution for high
demand industrial users.

Optimum power supply system and

Optimum charging system
The XGT range of tools and batteries
come with a built-in program, providing
digital communication between the Optimum charging
system
battery and tool. Allowing not only for
the battery to talk with tool but also the Auto maintenance
system with two cooling
tool to talk to the battery. Battery fans for providing more
technology and motor engineering that optimum fast charging

work together for optimum

performance.

40Vmax Li-ion Battery

Charging time
BL4025 BL4040
2.5Ah 4.0Ah
BL4025 28 min
(191B36-3) (191B26-6) BL4040 45 min
4
 40Vmax Lithium-ion Battery Series

Built Tough
Wall

designed for 40Vmax Li-Ion batteries

Terminal short-circuit
prevention structure
The protection wall is provided between
terminals against water and dust.

Insulating Film Water-proof Cell

paper ring

Waterproof Triple-layer
Structure
prevents cell failure due to water and dust.
4-LED fuel
gauge indicator

Heavy duty outer

casing and cell
holder Battery rail
Create a space to
absorb impact

Shock absorption structure High Rigidity Battery Rails

Durable slide in battery rail that holds the

withstand high power products

40Vmax Fast Charger

The enlarged and raised LED light Interchangeable
provides clearer indication of Adapter
charging status.

DC40RA ADP10 Compatible with LXT Li-Ion

(191E08-6) (191C11-5)
batteries
5
 Impact Driver
TD001G

Delivers 220N m of Max Torque

No load speed / Impacts per min (min )

Wood mode 3 Bolt mode T1 Teks screw (thin metal) T2 Teks screw (thick metal)
with rotation auto stop for Driving self-drilling screws to a Driving self-drilling screws to a
driving at low speed until fastening tightening/ loosening bolts for
begins thin gauge metal like a metal stud thick gauge metal
mor nt work

Mode1: 2,500 / -
Mode2: 3,700 / 4,400
0 - 1,800 / 4,400 Mode3: 3,700 / 4,400 0 - 2,400 / - 0 - 3,700 / 2,600

4 -Speed power selection

6 -Assist modes
No load speed / Impacts per min (min )

Max Hard Medium Soft

0 - 3,700 / 4,400 0 - 3,200 / 3,600 0 - 2,100 / 2,600 0 - 1,100 / 1,100

6
 40Vmax Lithium-ion Battery Series

Drove ø6.5 x 120mm metal

about fastening screws
Rigid anvil holder
with ball bearings
reduces bit wobbling
15 % TD001G
Predecessor Model 18V
115
100
2.5s

UP Slow Fast

One-touch 4-speed selector

Quick-change memory mode

One-touch bit
installation
Twin LED job light Work amount on a full battery charge*1

about 800pcs about 160pcs

Drove 65mm coarse thread screws Drove 120mm metal fastening screws
Variable speed
control by trigger Capacity Machine Screw: M4 - M8 (5/32" - 5/16")
Standard Bolt: M5 - M16 (3/16" - 5/8")
High Strength Bolt: M5 - M14 (3/16" - 9/16")
Coarse thread (in length): 22 - 125 mm (7/8" - 4-7/8")
Hex Shank 6.35 mm (1/4")
No Load Speed (RPM) Max / Hard / Med / Soft: 0 - 3,700 / 3,200 / 2,100 / 1,100
Impacts Per Minute (IPM) Max / Hard / Med / Soft: 0 - 4,400 / 3,600 / 2,600 / 1,100
Max Fastening Torque 220 N·m (1,950 in.lbs.)
Fastening Torque Hard / Med / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.)
Sound Pressure Level 96 dB(A)
Sound Power Level 107 dB(A)
Dimensions (L x W x H) w/ BL4025: 120x86x245 mm (4-3/4"x3-3/8"x9-5/8")
w/ BL4040: 120x86x250 mm (4-3/4"x3-3/8"x9-7/8")
Net weight 1.7 - 2.0 kg (3.7 - 4.4 lbs.)
*1 The test results depend to a great extent on the test material etc. 7
 Hammer Driver Drill / Driver Drill
HP001G / DF001G
13 mm (1/2")

Delivers 140N m of Max Torque

Solid performance 41 electronical clutch setting Active Feedback
(21-stage setting in High mode) sensing Technology

Easy jog dial

adjustment

STOP

Drove ø8 x 400mm long construction Drilled holes through 38mm thick SPF
about screws into 400mm thick SPF about with ø65mm (2 - 9/16") self-feeding bit

25 % HP / DF001G 125 35 % HP / DF001G 135

UP 100
UP 100
18V Predecessor Model 18V Predecessor Model

Slow Fast Slow Fast

8
 40Vmax Lithium-ion Battery Series

photo: HP001G

Work amount on a full battery charge*1

about 40 pcs
Drove ø8 x 400mm long
about 90 pcs
Drilled holes through 38mm
about 480
Drilled holes through
pcs
construction screws into thick SPF with ø65mm 38mm thick SPF with
400mm thick SPF (2 - 9/16") self-feeding bit 7/8" Ship Auger bit

Outstanding
drilling speed
0 - 2600minˉ¹
at High speed mode

Capacity Steel: 20 mm (13/16") / Wood (Auger-Bit): 50 mm (2")

Wood (Self-Feed Bit): 76 mm (3") / Wood (Hole Saw): 152 mm (6")
Masonry: 20 mm (13/16")
Chuck Capacity 1.5 - 13 mm (1/16 - 1/2")
Impacts Per Minute (IPM) High / Low: 0 - 39,000 / 0 - 9,750
HP001G No Load Speed (RPM) High / Low: 0 - 2,600 / 0 - 650
Max Fastening Torque Hard / Soft: 140 / 68 N·m (1,240 / 600 in.lbs.)
Max lock torque 125 N·m (1,100 in.lbs.)
Sound Pressure Level 85 dB(A)
Sound Power Level 96 dB(A)
Dimensions (L x W x H) w/ BL4025: 182x86x275 mm (7-1/8"x3-3/8"x10-7/8")
DF001G w/ BL4040: 182x86x282 mm (7-1/8"x3-3/8"x11-1/8")
Net weight 2.7 - 3.0 kg (6.0 - 6.6 lbs.)

Capacity Steel: 20 mm (13/16")

Wood (Auger-Bit): 50 mm (2") / Wood (Self-Feed Bit): 76 mm (3")
Wood (Hole Saw): 152 mm (6")
Compact overall length for
easy handling and control 181 mm Chuck Capacity
No Load Speed (RPM)
Max Fastening Torque
1.5 - 13 mm (1/16 - 1/2")
High / Low: 0 - 2,600 / 0 - 650
Hard / Soft: 140 / 68 N·m (1,240 / 600 in.lbs.)
18V Max lock torque 125 N·m (1,100 in.lbs.)
Predecessor Sound Pressure Level 75 dB(A)
Dimensions (L x W x H) w/ BL4025: 181x86x275 mm (7-1/8"x3-3/8"x10-7/8")
Model w/ BL4040: 181x86x282 mm (7-1/8"x3-3/8"x11-1/8")
Net weight 2.7 - 3.0 kg (5.9 - 6.6 lbs.)
*1 The test results depend to a great extent on the test material etc. 9
 Impact Wrench
TW001G
3/4" (19 mm)

Over 2,000 N m of Nut-Busting Torque

Electoric 4-stage Forward and reverse rotation auto stop mode
impact power selection
Forward Reverse
Stops immediately Stops immediately
after impact is after the bolt/ nut
detected gets loosened
Stops approximately Stops approximately 0.2
0.5 seconds after seconds after the bolt/
impact is detected nut gets loosened
Stops approximately Shift to 230 min-1
1 second after impact after the bolt/ nut
is detected gets loosened

High power
( ) ( ) BL Motor
Max: 0-1,800 Max: 0-2,500
Compact overall length
Hard: 0-1,400 for0-2,400
Hard:
easy handling
Medium: and control
0-1,150 Medium: 0-2,200
Soft: 0-950 Soft: 0-1,900

10
40Vmax Lithium-ion Battery Series

Work amount on a full battery charge*1

Battery: BL4040

about 350 pcs

Tightening M27 high strength bolts

Compact overall length for easy handling and control

217 mm TW001G

Predecessor
Model 18V

Fastening Capacities Standard Bolt: M12 - M36 (1/2" - 1-7/16")

High Strength Bolt: M10 - M27 (3/8" - 1-1/16")
Square Drive 19 mm (3/4")
No Load Speed (RPM) Max / Hard / Med / Soft: 0 - 1,800 / 0 - 1,400 / 0 - 1,150 / 0 - 950
Impacts Per Minute (IPM) Max / Hard / Med / Soft: 0 - 2,500 / 0 - 2,400 / 0 - 2,200 / 0 - 1,900
Max Fastening Torque 1,800 N·m (1,330 ft.lbs.)
Dimensions (L x W x H) w/ BL4025: 217x94x297 mm (8-1/2"x3-11/16"x11-3/4")
w/ BL4040: 217x94x303 mm (8-1/2"x3-11/16"x11-7/8")
Net weight 3.9 - 4.2 kg (8.6 - 9.3 lbs.)
*1 The test results depend to a great extent on the test material etc. 11
 Angle Grinder
/ /
/ /
100 mm (4") 115 mm (4-1/2") 125 mm (5")

High durability Active Feedback New toolless wheel cover

• Large ball bearing supports the No load speed: sensing Technology allows for fast and easy angle
motor. Shuts down the tool to protect the user, if the adjustment and installation / removal
• New switch design to reduce 8,500min.ˉ¹ rotation speed suddenly slows down. of wheel cover.
contact wearness.

Sudden reduction
of rotational speed

Auto-Stop PUSH

Cut concrete at depths of 20mm Work amount on a full Accessories

about battery charge*1 Dust collection wheel guard
140
40 %
GA005G Battery: BL4040

UP
18V Predecessor
Model

Slow
100

Fast
about 7m
Cutting depths: 20mm

12
 40Vmax Lithium-ion Battery Series

GA003G / GA004G / GA005G /

GA011G / GA012G / GA013G

( ")

( / ")

( ")

( ")

( / ")

( ")

Wheel Diameter 100 mm (4") 115 mm (4-1/2") 125 mm (5")

Hole Diameter 16 mm (5/8") 22.23 mm (7/8") 22.23 mm (7/8")
No Load Speed (RPM) 8,500 8,500 8,500
Sound Pressure Level 81 dB(A) 81 dB(A) 81 dB(A)
Sound Power Level 92 dB(A) 92 dB(A) 92 dB(A)
Dimensions (L x W x H) w/ BL4025: 398x117x150 mm w/ BL4025: 398x130x156 mm w/ BL4025: 398x140x156 mm
(15-5/8"x4-5/8"x5-7/8") (15-5/8"x5-1/8"x6-1/8") (15-5/8"x5-1/2"x6-1/8")
w/ BL4040: 410x117x162 mm w/ BL4040: 410x130x168 mm w/ BL4040: 410x140x168 mm
(16-1/8"x4-5/8"x6-3/8") (16-1/8"x5-1/8"x6-5/8") (16-1/8"x5-1/2"x6-5/8")
Net weight 2.8 - 3.3 kg (6.2 - 7.3 lbs.) 2.9 - 3.5 kg (6.4 - 7.7 lbs.) 2.9 - 3.6 kg (6.4 - 7.9 lbs.)

Wheel Diameter 100 mm (4") 115 mm (4-1/2") 125 mm (5")

Hole Diameter 16 mm (5/8") 22.23 mm (7/8") 22.23 mm (7/8")
No Load Speed (RPM) 8,500 8,500 8,500
Sound Pressure Level 81 dB(A) 81 dB(A) 81 dB(A)
Sound Power Level 92 dB(A) 92 dB(A) 92 dB(A)
Dimensions (L x W x H) w/ BL4025: 398x117x150 mm w/ BL4025: 398x130x156 mm w/ BL4025: 398x140x156 mm
(15-5/8"x4-5/8"x5-7/8") (15-5/8"x5-1/8"x6-1/8") (15-5/8"x5-1/2"x6-1/8")
w/ BL4040: 410x117x162 mm w/ BL4040: 410x130x168 mm w/ BL4040: 410x140x168 mm
(16-1/8"x4-5/8"x6-3/8") (16-1/8"x5-1/8"x6-5/8") (16-1/8"x5-1/2"x6-5/8")
Net weight 2.8 - 3.4 kg (6.2 - 7.5 lbs.) 3.0 - 3.6 kg (6.6 - 7.9 lbs.) 3.0 - 3.6 kg (6.6 - 7.9 lbs.)
*1 The test resules depend to a great extent on the test material etc. 13
 Combination Hammer
HR001G / HR002G / HR003G / HR004G
28 mm (1-1/8")

Active Feedback
Anti Vibration Technology
sensing Technology
turns the mot rotation is suddenly forced to stop.
(HR001G / HR002G)

Vibration Level

7.0 m/s 2
STOP

Redesigned Tool Balance for Increased Operability Auto-start

The tool's center of gravity is located as Wireless System
close to the handle grip as possible,
connects to compatible vacuum cleaner with Bluetooth. The
providing more control and less fatigue. vacuum cleaner automatically runs while the switch is on.
(HR001G / HR002G)
Lightweight
Center of

3.9 kg
gravity

Vacuum
Model: HR001G Switch on
Battery: BL4025 cleaner
the tool
is activated

14
 40Vmax Lithium-ion Battery Series

Work amount on a full

battery charge*1
Battery: BL4025

about120 pcs
Drilled holes a depth of 60mm
(2-3/8") with ø12.5mm bit

HR001G / HR002G HR001G / HR002G HR001G / HR002G

Dust Extraction System

DX12 (191E52-3) / DX14 (191E58-1)

Quick change Dust Extraction

drill chuck System
HR001G
HR002G
HR003G
HR004G

Impact Energy EPTA-Procedure 05/2009: 2.8 J EPTA-Procedure 05/2009: 2.9 J

Capacity Concrete / Steel / Wood / Core Bit /
Concrete / Steel / Wood / Core Bit /
Diamond Core Bit (Dry Type): Diamond Core Bit (Dry Type):
28 / 13 / 32 / 54 / 65 mm 28 / 13 / 32 / 54 / 65 mm
(1-1/8" / 1/2" / 1-1/4" / 2-1/8" / 2-9/16")
(1-1/8" / 1/2" / 1-1/4" / 2-1/8" / 2-9/16")
Blows Per Minute (BPM) 0 - 5,000 0 - 5,000
No Load Speed (RPM) 0 - 980 0 - 980
Chuck Capacity 1.5 - 13 mm (1/16 - 1/2") 1.5 - 13 mm (1/16 - 1/2")
Sound Pressure Level 95 dB(A) 93 dB(A)
Sound Power Level 106 dB(A) 104 dB(A)
Dimensions (L x W x H) w/ BL4025: 358x102x232 mm w/ BL4025: 389x102x232 mm
(14-1/8"x4"x9-1/8") (15-1/4"x4"x9-1/8")
w/ BL4040: 373x102x238 mm w/ BL4040: 404x102x238 mm
(14-3/4"x4"x9-3/8") (15-7/8"x4"x9-3/8")
Net weight 3.9 - 4.6 kg (8.6 - 10.1 lbs.) HR002G: 4.1 - 4.6 kg (9.0 - 10.1 lbs.)
HR004G: 4.0 - 4.5 kg (8.8 - 9.9 lbs.)
*1 The test resules depend to a great extent on the test material etc. 15
 photo: HS003G

Circular Saw
HS003G / HS004G
190 / 185 mm (7-1/2" / 7-1/4")

Automatic torque Auto-start

Drive Technology Wireless System
automatically changes connects to compatible vacuum cleaner with Bluetooth. The vacuum cleaner
Speed

the cutting speed On light duty :

automatically runs while the switch is on.
High-speed rotation mode
according to load
conditions for an
Automatic torque drive
optimum operation:
• On light duty: On heavy duty :
High torque mode Vacuum
high-speed rotation Switch on
cleaner
mode the tool
is activated
• On heavy duty: high
torque mode Torque (load)

Compatible with guide rail without

adapter (HS004G only)
HS003G HS004G

56° 48°

16
 40Vmax Lithium-ion Battery Series

photo: HS004G

Work amount on a full battery charge*1

about 145 pcs

Melapi
about 310 pcs
SPF 2 x 10
(thickness=60mm / width=300mm)

photo: HS003G
Lightweight Max cutting capacity at 90°

4.4 kg 66 / 68.5 mm
Model: HS003G
185mm 190mm

Battery: BL4040 Model: HS003G

Tool hanger
( ) photo: HS004G HS003G HS004G
Blade Diameter 190 / 185 mm (7-1/2" / 7-1/4") 190 / 185 mm (7-1/2" / 7-1/4")
Max Cutting Capacity 90°: 68.5 / 66 mm (2-11/16" / 2-5/8") 90°: 62.5 / 60 mm (2-7/16" / 2-3/8")
45°: 47.5 / 45.5 mm (1-7/8" / 1-13/16") 45°: 44.5 / 43 mm (1-3/4" / 1-11/16")
56°: 35.5 / 34 mm (1-3/8" / 1-5/16") 48°: 42 / 41 mm (1-5/8" / 1-5/8")
No Load Speed (RPM) 6,000 6,000
Dimensions (L x W x H) w/ BL4025: 316x200x290 mm w/ BL4025: 322x210x290 mm
(12-1/2"x7-7/8"x11-3/8") (12-5/8"x8-1/4"x11-3/8")
w/ BL4040: 331x200x290 mm w/ BL4040: 337x210x290 mm
(13"x7-7/8"x11-3/8") (13-1/4"x8-1/4"x11-3/8")
Net weight 4.1 - 4.4 kg (9.0 - 9.7 lbs.) 4.4 - 4.7 kg (9.7 - 10.4 lbs.)
*1 The test results depend to a great extent on the test material etc. 17
 Recipro Saw
JR001G

High Durable Structure

Easy blade ejection lever

Smooth cutting with

vertical crank system
Balancer

Rigid shoe Force

Thickness and the
shape are redesigned

Tool-less shoe
adjustment
The tool body is separated into the
upper and lower housings which
joined with vibration absorbing
cushion rubbers to reduce load on
battery and terminal.

18
 40Vmax Lithium-ion Battery Series

High Cutting Speed

Two
switch trigger ø25.4mm (1") Carbon steel pipe
Metal
Electronic 2-speed Cutting speed
about JR001G 110
10 % 18Vx2 Predecessor Model 100
UP Slow Fast

SPF 2 x 10
Wood
Cutting speed
about JR001G 135
35 % 18Vx2 Predecessor Model 100
Easy-to-grip
slim design
UP Slow Fast

Work amount on a full battery charge*1

Twin LED job light

about 130pcs about 155pcs

ø25.4mm (1") Carbon steel pipe SPF 2 x 10
Tool hanger
Lightweight
Length of Stroke 32 mm (1-1/4")

4.2 kg
Strokes Per Minute (SPM) High / Low: 0 - 3,000 / 0 - 2,300
Capacity Pipe : 130 mm (5-1/8")W ood: 255 mm (10")
Sound Pressure Level 85 dB(A)
Sound Power Level 96 dB(A)
Dimensions (L x W x H) w/ BL4025: 457x88x233 mm (18"x3-1/2"x9-1/8")
Battery: BL4025 w/ BL4040: 472x88x239 mm (18-5/8"x3-1/2"x9-3/8")
Net weight 4.2 - 4.5 kg (9.3 - 9.9 lbs.)
*1 The test results depend to a great extent on the test material etc. 19
Makita Singapore Pte Ltd
7, Changi South Street 3, Singapore 486348
Phone : +65-6546-8700 Fax : +65-6546-8711
Email : [email protected]
Website : www.makita.com.sg MakitaSG Visit our website
PRINTED IN SINGAPORE