Pit Ladders

PIT L ADDERS

Determining the Norm-­

Compliant Ladder Length 41
Pit Ladder Type A 42
Pit Ladder Type B 43
Pit Ladder Type D 44
Pit Ladder Type E 45
Pit Ladder Type E1 46
Pit Ladder Type F 47
Lockable Suspension Fitting
for Ladder 47
Pit Ladder Type J 48
Pit Ladder Type S 49

40 · Stingl-Catalogue 2019
 Pit Ladders

5
DETERMINING THE NORM-­COMPLIANT LADDER
LENGTH
ladder length L (m) max. pit depth HSG (m) wall distance X (m)
a = 65° a = 70° a = 75° a = 65° a = 70° a = 75°
1,50 0,26 0,310 0,35 0,12 0,11 0,09
1,75 0,49 0,54 0,59 0,23 0,20 0,16
1,80 0,53 0,59 0,64 0,25 0,22 0,17
2,10 0,80 0,87 0,93 0,37 0,32 0,25
2,25 0,94 1,01 1,07 0,44 0,37 0,29
2,30 0,98 1,06 1,12 0,46 0,39 0,30
2,35 1,03 1,11 1,17 0,48 0,40 0,31
2,46 1,13 1,21 1,28 0,53 0,44 0,34
2,50 1,17 1,25 1,31 0,54 0,45 0,35
2,60 1,26 1,34 1,41 0,59 0,49 0,38
2,65 1,30 1,39 1,46 0,61 0,51 0,39
2,85 1,48 1,58 1,65 0,69 0,57 0,44
2,90 1,53 1,63 1,70 0,71 0,59 0,46
3,00 1,62 1,72 1,80 0,75 0,63 0,48
3,15 1,75 1,86 1,94 0,82 0,68 0,52
3,20 1,80 1,91 1,99 0,84 0,69 0,53
3,40 1,98 2,09 2,18 0,92 0,76 0,59
3,50 2,07 2,19 2,28 0,97 0,80 0,61
3,60 2,16 2,28 2,38 1,01 0,83 0,64
3,70 2,25 2,38 2,47 1,05 0,87 0,66
3,75 2,30 2,42 2,52 1,07 0,88 0,68
4,00 2,53 2,66 2,76 1,18 0,97 0,74
4,05 2,57 2,71 2,81 1,20 0,98 0,75
4,10 2,62 2,75 2,86 1,22 1,00 0,77
4,30 2,80 2,94 3,05 1,30 1,07 0,82
≥ 1100

L
HSG

Stingl-Catalogue 2019 · 41
Pit Ladders

5
PIT LADDER TYPE A
Stationar y, inclineable aluminum ladder with Ever y pit ladder comes with the necessar y fixing
contact-­p rotected safety suspension. Ideal for nar- material. The aluminium ladder type A complies with
row shaft conditions. The safety suspension is made DIN EN 131
of steel. An electrical contact which stops lift oper-
ation as soon as the ladder is inclined is mandatory SHAFT SKETCH: Ladder in stowed position.
to ensure DIN EN 81 compliance. Contact connection Set-up height only 55 mm.
with the safety circuit must be carried out by a com-
petent person/firm. FURTHER LENGTHS UPON REQUEST!
PAT. 1063368

WITH SAFETY SWITCH

Item No. Description Angle of DIN EN 81-20 Compliant
inclination Pit Depth (HSG)
max. or smaller

0311250010 Pit ladder type A with safety switch, 2,50 m/long 70° 1,21 m
0311300010 Pit ladder type A with safety switch, 3,00 m/long 72° 1,79 m
0311360010 Pit ladder type A with safety switch, 3,60 m/long 74° 2,35 m
0311410010 Pit ladder type A with safety switch, 4,10 m/long 75° 2,93 m
WITHOUT CONTACT PROTECTION
Item No. Description Angle of Recommended Pit Ladder Length
inclination Pit depth (HSG)
max. or smaller
0322250010 Pit ladder type A without contact protection, 3,00 m/long 70° 1,21 m
0321300010 Pit ladder type A without contact protection, 3,00 m/long 72° 1,79 m
0321360010 Pit ladder type A without contact protection, 3,60 m/long 74° 2,35 m
0321410010 Pit ladder type A without contact protection, 4,10 m/long 75° 2,93 m
WITH POSITION SWITCH
Item No. Description
0300250000 Pit ladder type A with position switch, 2,50 m/long 70° 1,21 m
0300300000 Pit ladder type A with position switch, 3,00 m/long 72° 1,79 m
0300360000 Pit ladder type A with position switch, 3,60 m/long 74° 2,35 m
0300410000 Pit ladder type A with position switch, 4,10 m/long 75° 2,93 m

42 · Stingl-Catalogue 2019
 Pit Ladders

5
PIT LADDER TYPE B
Stationary aluminium ladder with mounting brack- Mounting brackets made of galvanized sheet steel
ets. This version is for use in lift shafts with suffi- and fixing material come with every unit.
cient space conditions. The step-depth of 200 mm ful-
fills DIN EN 81-20 requirements. T he aluminium l adder t y pe B complies w ith
DIN EN 131 requirements.
The overall setup height approx. 235 mm for ladder
lengths of 2.50 m to 4.10 m are available from stock. FURTHER LENGTHS UPON REQUEST!

WITH MOUNTING BRACKETS

Item No.
Amount of Description
Angle of DIN EN 81-20 Compliant
Spacers inclination Pit Depth (HSG)
max. or smaller

0361150010 Pit ladder type B, 1,50 m/long 4 90° 0,40 m

0361180010 Pit ladder type B, 1,80 m/long 4 90° 0,70 m
0361250010 Pit ladder type B, 2,50 m/long 4 90° 1,40 m
0361300010 Pit ladder type B, 3,00 m/long 4 90° 1,90 m
0361360010 Pit ladder type B, 3,60 m/long 4 90° 2,50 m
0361420010 Pit ladder type B, 4,20 m/long 6 90° 3,00 m
WITHOUT MOUNTING BRACKETS
Item No. Description Amount of Angle of Recommended Pit Ladder Length
Spacers inclination Pit Depth (HSG)
max. or smaller
0361150020 Pit ladder type B, 1,50 m/long 0 70° 0,31 m
0361180020 Pit ladder type B, 1,80 m/long 0 70° 0,59 m
0361250020 Pit ladder type B, 2,50 m/long 0 70° 1,25 m
0361300020 Pit ladder type B, 3,00 m/long 0 70° 1,72 m
0361360020 Pit ladder type B, 3,60 m/long 0 70° 2,28 m
0361420020 Pit ladder type B, 4,20 m/long 0 70° 2,75 m

Stingl-Catalogue 2019 · 43
Pit Ladders

5
PIT LADDER TYPE D
Aluminum ladder with hook profile meant for place-
concrete shaft wall
ment at the door threshold. The profile is mounted on
mm

two guide rails and can be adjusted flexibly to allow 61 mm

le
ladder use in pits with different depths. The ladder c-profile rail
0

stab
dowel
1.20

adju is equipped with changeable anti-skid shoes. 4-edged depth

anti-skid steps connect the ladder bars. Connection of adjustable
the ladder with the shaft wall is ensured by a metal hook profile
chain (approx. 3.000 mm) and respective fixing mate-
rial (dowel, nuts and washers). The ladder comes counter nut M8
with all necessary fixing material.
dowel
M8-85/137
The Pit ladder Type D is manufactured according to safety chain
DIN EN 131. ca. 3.000 mm long

FURTHER LENGTHS UPON REQUEST!

LOCKABLE SUSPENSION FITTING FOR ladder beam

LADDER SEE PAGE 47
Europäisches
Patent Nr. 1609943

HOOK PROFILE VARIANTS

c-profile rail

hook profile

Variant 1
Variant 3
counter nut

Variant 4

aluminium
ladder Variant 2

Item No. Description With chain and hook With chain and hook Angle of DIN EN 81-20 Compliant
profile variant 1 and profile variant 2 and inclination Pit Depth (HSG)
floor attachement floor attachement max. or smaller
0355150010 Pit ladder type D, 1,50 m/long • 70° 0,31 m
0355180010 Pit ladder type D, 1,80 m/long • 70° 0,59 m
0355250010 Pit ladder type D, 2,50 m/long • 70° 1,25 m
0355300010 Pit ladder type D, 3,00 m/long • 70° 1,72 m
0355360010 Pit ladder type D, 3,60 m/long • 70° 2,28 m
0355410010 Pit ladder type D, 4,10 m/long • 70° 2,75 m
0356150120 Pit ladder type D, 1,50 m/long • 70° 0,31 m
0356180120 Pit ladder type D, 1,80 m/long • 70° 0,59 m
0356250110 Pit ladder type D, 2,50 m/long • 70° 1,25 m
Item No. Description With chain and hook With chain and hook Angle of DIN EN 81-20 Compliant
profile variant 1 profile variant 2 inclination Pit Depth (HSG)
max. or smaller
0352150010 Pit ladder type D, 1,50 m • 70° 0,31 m
0352180010 Pit ladder type D 1,80 m • 70° 0,59 m
0352250010 Pit ladder type D, 2,50 m • 70° 1,25 m
0352300010 Pit ladder type D, 3,00 m • 70° 1,72 m
0352360010 Pit ladder type D, 3,60 m • 70° 2,28 m
0352410010 Pit ladder type D, 4,10 m • 70° 2,75 m
0353150120 Pit ladder type D, 1,50 m • 70° 0,31 m
0353180120 Pit ladder type D, 1,80 m • 70° 0,59 m
0353250110 Pit ladder type D, 2,50 m • 70° 1,25 m
ACCESSORIES
Item No. Description
303999003 Floor attachement for pit ladder
303999006 Hook profile variant 1, rigid hang-in depth 35 mm
303999007 Hook profile variant 2, for revolving doors with 2 spigots
303999008 Hook profile variant 3, space-saving and tiltable
303999009 Hook profile variant 4, flexible hang-in depth (two-part) from 48 to 68 mm
• applies
44 · Stingl-Catalogue 2019
 Pit Ladders

5
PIT LADDER TYPE E
Two-piece folding ladder made of aluminium with The ladder is pulled up from the pit with a chain
steel joints. Equipped with a mounting profile (1) (ca. 3.000 mm, to be connected with the shaft wall)
meant for placement in the sill groove to avoid tilt and placed against the door threshold. Steel joints
back. The profile can be easily adjusted according lock-in automatically while the mounting profile is
to the given pit depth. The bottom of the ladder is placed in the sill groove.
securely connected to a steel jack (2) which is fixed
to the shaft floor. After use, the ladder has to be lifted slightly and the
joints have to be unlocked with a separate release
The folding ladder is especially suitable in lift shafts rope before folding it back into the pit.
where fixing to the wall is impossible. Pit ladder type
E requires a minimum shaft depth of 1.450 mm. The The aluminium ladder complies with DIN  EN 131 +
unfolded and locked ladder (4) has a vertical height of DIN EN 81-20/50. requirements.
approx. 2.200 mm. Exterior ladder width 350 mm. The
ladder complies with German DIN and VBG 74 stand- FURTHER LENGTHS UPON REQUEST!
ards set by the German Berufsgenossenschaft (Stat-
utory Accident Insurance Institution). It comes with
all necessary fixing material.

Europäisches
Patent Nr. 1609943

MEASURES (MM) PIT LADDER TYPE E

1.290
1.090
1100

~300

60
Ø 13
e.g. pit depth = 1.100

460

300
350
420
ca. 300
ca. 300

190 280 30 180

30 30
shaft depth = 1.450

Item No. Description

2-part Angle of DIN EN 81-20 Compliant
foldable inclination Pit Depth (HSG)
max. or smaller
0370225010 Pit ladder type E, 2,25 m/long • 70° 1,01 m
ACCESSORIES
Item No. Description
304999001 Metal support with electrical switch
304999002 Wall mounted adapter
303999006 Hook profile variant 1, rigid hang-in depth 35 mm
303999007 Hook profile variant 2, for revolving doors with 2 spigots
303999008 Hook profile variant 3, space-saving and tiltable
303999009 Hook profile variant 4, flexible hang-in depth (two-part) from 48 to 68 mm

Stingl-Catalogue 2019 · 45
Pit Ladders

PIT LADDER TYPE E1

This 3-piece folding ladder is especially suitable for chain and locks in automatically. After use, the type
shaft pits which do not allow the fixing of a pitladder E1 is unlocked with a separate release rope before
to the shaft wall or if floor fixing is required due to it can be folded back into the pit. The floor-mounted
design reasons (e.g. panoramic lifts). jack ensures a safe ladder position at any time. It
also functions as a guiding system when the ladder is
Thanks to its two pairs of hinges, type E1 is the ideal brought from a folded position into an unfolded posi-
access ladder in shafts with low shaft depths and tion. For hydraulic lifts the jack can be fixed to the
high pit depths. shaft wall with an additional wall mounted adapter in
order to avoid drill holes on the shaft floor which are
The pit ladder type E1 is available in three lengths. generally not allowed.

OPTIONAL: Electrical switch plus holder. The ladder comes with fixing material. Besides the
electrical switch and the jack holder for hydraulic
The pit ladder is equipped with an adjustable hook lifts it can also be equipped optionally with a hand-
profile which has to be placed in the sill groove rail extension.
Example: Parallel installation
to avoid tilt back during use. If the ladder can be
installed only parallel to the shaft door opening, an The aluminium ladder complies with DIN  EN 131 +
optional electrical switch should be used. The switch DIN EN 81-20/50. requirements.
can be installed on the floor or at the shaft wall alter-
natively. The ladder is pulled up from the pit with a FURTHER LENGTHS UPON REQUEST!
Buffer
300 mm
350 mm

Europäisches
Patent Nr. 1609943
1.020 or 1.300 mm

Example: Longitudinal installation

Item No. Description 3-part Number of Angle of DIN EN 81-20 Compliant

foldable steps inclination Pit Depth (HSG)
max. or smaller
0370175020 Pit ladder type E1, 1,75 m/long • 3x2 70° 0,54 m
0370246020 Pit ladder type E1, 2,46 m/long • 3x3 70° 1,21 m
0370340020 Pit ladder type E1, 3,40 m/long • 3x4 70° 2,09 m
ACCESSORIES
304999001 Metal support with electrical switch
304999002 Wall mounted adapter
303999006 Hook profile variant 1, fixed hook depth 35mm
303999007 Hook profile variant 2, with 2 studs for swing doors
303999008 Hook profile variant 3, space-saving and collapsible
303999009 Hook profile variant 4, flexible hook depth (two-part) from 48 to 68 mm

46 · Stingl-Catalogue 2019
 Pit Ladders

PIT LADDER TYPE F

This static stepladder has spacers that pivot for- BENEFITS: • Quick and cost-efficient solution •
ward. A spring mechanism ensures that the ladder Suitable for use in narrow spaces • Thanks to the
lies directly against the shaft wall, leaving a gap to spring mechanism, there is no need for a monitoring
the floor of the shaft, when it is not being used. contact to monitor the position of the ladder • The
spacers can be attached to any crimped ladder step
This means that a small installation depth of only with a standard external width of 350 mm and a step
around 80–90 mm (depending on the length of the profile of at least 30x30 mm • Short installation time
ladder) is required. The step depth required by acci-
dent prevention regulations is respected if the ladder The aluminium ladder complies with DIN  EN 131 +
is pulled as far forward as possible in an 85° move- DIN EN 81-20/50. requirements.
ment until it rests on the floor of the shaft. The ladder
can then be used. The ladder automatically returns to The delivery includes various mounting parts.
the shaft wall once weight is removed from it.
FURTHER LENGTHS UPON REQUEST!

Europäisches
Patent Nr. 1609943

Item No. Description Angle of DIN EN 81-20 Compliant

inclination Pit Depth (HSG)
max. or smaller
3752150000 Pit ladder type F, 1,50 m/long 90° 0,40 m
3752180000 Pit ladder type F, 1,80 m/long 90° 0,70 m
3752250000 Pit ladder type F, 2,50 m/long 90° 1,40 m
3752300000 Pit ladder type F, 3,00 m/long 90° 1,90 m
3752360000 Pit ladder type F, 3,60 m/long 90° 2,50 m
3753410000 Pit ladder type F, 4,10 m/long 90° 3,00 m

LOCKABLE SUSPENSION FITTING FOR LADDER

GALVANISED LOCK BOX WITH 3-EDGE LOCK
Item No. Description
303999001 Length 25cm, depth 4,5cm, height: 10cm. For ladder stiles with max. 58mm and
steps 29x29mm. With fixing material for walls
GALVANISED LOCK BOX WITH PAD-LOCK OPTION
Item No. Description
303999002 Length 25cm, depth 4,5cm, height: 10cm. For ladder stiles with max. 58mm
and steps 29x29mm. With fixing material for walls

Stingl-Catalogue 2019 · 47
Pit Ladders

5
PIT LADDER TYPE J
Mobile aluminium ladder meant for placement at the door threshold. • The ladder locks itself automatically when
threshold. Folds together to a handy size in stowed posi- unfolded. It is equipped with anti-skid rubber feet. • The
tion. It can be stowed at the shaft wall. ladder withstands forces of up to 350 kg. • The rungs are
37 mm wide with slightly curved upper side and anti-slip
Available in lengths from 1,80 m up to 4,30 m (closed) and grooves. • High quality and durability thanks to alumin-
1,45 m up to 4,00 m (opened). ium alloy AlMgSi0,5/F25, anodised. Axles and rivets made
of stainless steel A2 70 DaN/mm2.
FEATURES: • The pit ladder type J can be folded
together to a space-saving bar of only 64x48 mm. Thus, it The aluminium ladder type J complies with DIN  EN 131.
can be easily stowed on the shaft wall. • The ladder opens
itself easily and without effort. • With a weight of less than OPTIONAL ACCESSORIES: • Anti-skid floor edging
2,25 kg/m the ladder can be mounted easily at the door • Surveillance contact

closed opened

Item No Description / Number with Angle of DIN EN 81-20 Compliant

Length of Ladder closed / opened of Steps floor inclination Pit Depth (HSG)
attachement max. or smaller

0335180000 Pit ladder type J, 1,80 m / 1,45 m 4 • 70° n.a.
0335210000 Pit ladder type J, 2,10 m / 1,75 m 5 • 70° 0,59 m
0335235000 Pit ladder type J, 2,35 m / 2,00 m 6 • 70° 0,78 m
0335265000 Pit ladder type J, 2,65 m / 2,30 m 7 • 70° 1,06 m
0335290000 Pit ladder type J, 2,90 m / 2,60 m 8 • 70° 1,34 m
0335320000 Pit ladder type J, 3,20 m / 2,85 m 9 • 70° 1,58 m
0335350000 Pit ladder type J, 3,50 m / 3,15 m 10 • 70° 1,86 m
0335375000 Pit ladder type J, 3,75 m / 3,40 m 11 • 70° 2,09 m
0335405000 Pit ladder type J, 4,05 m / 3,70 m 12 • 70° 2,38 m
0335430000 Pit ladder type J, 4,30 m / 4,00 m 13 • 70° 2,66 m

Item No Description / Number Angle of

Length of Ladder closed / opened of Steps inclination
0330180000 Pit ladder type J, 1,80 m / 1,45 m 4 70° n.a.
0330210000 Pit ladder type J, 2,10 m / 1,75 m 5 70° 0,59 m
0330235000 Pit ladder type J, 2,35 m / 2,00 m 6 70° 0,78 m
0330265000 Pit ladder type J, 2,65 m / 2,30 m 7 70° 1,06 m
0330290000 Pit ladder type J, 2,90 m / 2,60 m 8 70° 1,34 m
0330320000 Pit ladder type J, 3,20 m / 2,85 m 9 70° 1,58 m
0330350000 Pit ladder type J, 3,50 m / 3,15 m 10 70° 1,86 m
0330375000 Pit ladder type J, 3,75 m / 3,40 m 11 70° 2,09 m
0330405000 Pit ladder type J, 4,05 m / 3,70 m 12 70° 2,38 m
0330430000 Pit ladder type J, 4,30 m / 4,00 m 13 70° 2,66 m

ACCESSORIES
Item No Description
303999003 Floor attachement for pit ladder
309999002 Bodenanschlagblech und Kette für Schachtgrubenleiter Type J
309999003 Leiterhakenset für Schachtgrubenleiter Type J
309999004 Leiterwinkelset für Schachtgrubenleiter Type J
309999005 Wallholder for the ladder type J with position switch

48 · Stingl-Catalogue 2019
 Pit Ladders

PIT LADDER TYPE S

Mobile pit ladder with hook profile meant for place- saves costly changes on site, facilitates planning
ment in the groove of a telescopic or centrally open- and ensures a safe angle of inclination during use.
ing lift door. This pit ladder type is especially suitable The hook profile is equipped with synthetic buffers on
in cases where fastening to the shaft wall or stowage each side to prevent damage to the lift doors. A metal
on the shaft floor is impossible. chain connects the ladder with the lift shaft. Holder
and fixing material come with every ladder. Set-up
The ladder is vertically stowed in a floor-mounted height is only 65 mm.
holder close to the lift door. The hook profile (20°)
folds away automatically in stow position and avoids The ladder complies with DIN  EN 131.
tilt back during use. It is mounted on two guide
rails and can be adjusted within a range of approx. FURTHER LENGTHS
1.000 mm according to the given pit depth. That UPON REQUEST.
Item No. Description with Angle of DIN EN 81-20 Compliant
floor inclination Pit Depth (HSG)
attachement max. or smaller
0395150010 Pit ladder type S, 1,50 m/long • 70° 0,31 m
0395180010 Pit ladder type S, 1,80 m/long • 70° 0,59 m
0395250010 Pit ladder type S, 2,50 m/long • 70° 1,25 m
0395300010 Pit ladder type S, 3,00 m/long • 70° 1,72 m
0395360010 Pit ladder type S, 3,60 m/long • 70° 2,28 m
0395410010 Pit ladder type S, 4,10 m/long • 70° 2,75 m

Item No. Description Angle of Recommended Ladder Length

inclination Pit Depth (HSG)
max. or smaller
0391150010 Pit ladder type S, 1,50 m/long 70° 0,31 m
0391180010 Pit ladder type S, 1,80 m/long 70° 0,59 m
0391250010 Pit ladder type S, 2,50 m/long 70° 1,25 m
0391300010 Pit ladder type S, 3,00 m/long 70° 1,72 m
0391360010 Pit ladder type S, 3,60 m/long 70° 2,28 m
0391410010 Pit ladder type S, 4,10 m/long 70° 2,75 m
ACCESSORIES
Item No. Description
303999003 Floor attachment for pit ladder
305999002 Floor holder

Stingl-Catalogue 2019 · 49