MILL TEST CERTIFICATE Jindal Stainless Limited.
(INSPECTION CERTIFICATE) IS 6911
Jajpur,Odisha
In Accordance with EN 10204 :2004 Type 3.1
CM/L-5200020363
CUSTOMER :NEELKAMAL STAINLESS CERTIFICATE NO. :JSL-7014/QA/2024-25/DOM/01836340
CITY :MUMBAI DATE :11.05.2024 VEHICLE NO. :MH12FC7303
P.O.NO. :1423778_NS/22APRIL24 PO DATE:22.04.2024 Ref. MTC No. :JSL-JRD/QA/2024-25/DOM/01832031
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0586417957
SHIPMENT/DELIVERY NO. :6500079284 NET WT(MT) :4.400
Material Description/Product Grade / Type Material Specifications Process-Route
STAINLESS STEEL 316L/316 ASTM A240/A240M-23A, ASME SA-240/SA-240M 2023 SEC. II, EF-AOD-LRF-CCS
PART A, IS 6911:2017 AMD. 3
PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 D068832903 0001032883 4.400 10 12401483 6.000 1,500.00 6,000.00 N1 Mill Edge PRIME
CHEMICAL ANALYSIS (LADLE)
HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
12401483 0.020 1.26 0.003 0.043 0.39 10.03 16.06 0.030 2.08 - - - -
MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE
Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm
1 350 - 612 52 - - 82 / 83 -
ADDITIONAL INFORMATION
1)- MATERIAL HAS BEEN SOLUTION ANNEALED AT MIN 1040º C & QUENCHED IN WATER.
2)- ABOVE MATERIAL ALSO CONFIRM TO IS 6911:2017 AMD. 3 GRADE 316L/316.
3)- MATERIALS CONFIRM TO THE REQUIREMENTS AS PER ASTM A480/A480M-23B & ASME SA-480/SA-480M SEC. II PART A-2023.
* THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD 3 CHEMICAL & MECHANICAL PROPERTIES OF
PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED
IN BIS CERTIFICATION.
HOT ROLLED FINISHES : (BL, ANN, N1, 1D, CHQ) & COLD ROLLED FINISHES: (2E, 2D, 2B, BA, NO.4, HL)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".
Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in accordance ISO 9001 : 2015
Kalinga Nagar Industrial Complex, with requirements of the material specification and has been found to meet the requirements of order. ISO 14001 : 2015
PO: Danagadi , Jajpur ISO 45001 : 2018
Odisha - 755026, India. The material supplied under this Test Certificate is free from any radioactive contamination as checked ISO 50001: 2018
TEL :+91-9078899031, by procedures established by Jindal Stainless Limited as per the recommendations provided by AERB. IATF 16949 : 2016
FAX :+91-06726-266006 CERTIFIED COMPANY
Email: [email protected] Format Ref: JSLO/F/QA-CRM/32 Rev.01
Eff Date: 24/09/2021
Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1
