PRACTICAL EXAM- CAE Marks [50] Time: 2 hrs
SET C
Q1.
Q2. Find Reaction solution and the Nodal solution for the following problem.
[20]
PRACTICAL EXAM- CAE Marks [50] Time: 2 hrs
SET D
Q1.
[30]
Q2. The rectangular plate of 100×50×10mm contain a centrally punched circular hole of
25mm diameter & is subjected to tensile loading of 1000N/mm2 as shown in fig. below.
Analyze for the von-mises stresses & maximum deflection.
FIX THE HORIZONTAL LINES.(for all dof) [20]
PRACTICAL EXAM- CAE Marks [50] Time: 2 hrs
SET B
Q1.
[30]
Q2. Determine the nodal displacements, element stresses and support reactions in the
truss structure shown below, assuming points 1 and 3 are fixed. Use E = 70 GPa and A =
200 mm2.
[20]
PRACTICAL EXAM- CAE Marks [50] Time: 2 hrs
SET E
Q1.
[30]
Q2.
[20]
PRACTICAL EXAM- CAE Marks [50] Time: 2 hrs
SET F
Q1. Perform nonlinear buckling analysis on a given column and determine safe buckling load for a
given steel column with a 20 mm X 20 mm cross section and 1m height, rigidly constrained at the
bottom.
Assume E = 200Gpa and Poisson’s ratio = 0.3 density =7860 kg/m3 [30]
Q2. Find Reaction solution and the Nodal solution for the following problem. [20]
PRACTICAL EXAM- CAE Marks [50] Time: 2 hrs
SET A
Q1. . Perform modal analysis on a given cantilever beam and determine first 10 natural frequencies
for given steel beam with a 20 mm X 20 mm cross section and 1m length, rigidly constrained at the
bottom.
Assume E = 200Gpa and Poisson’s ratio = 0.3 density =7860 kg/m3 [30]
Q2.
[20]
