Pump size & type / Stages : 2K50-32-315A-OP /1
Based on curve no. : E591/0125/2
Impeller diameter : 11.73 in
Customer : ECOPETROL, S.A. Capacity : 157.3 USgpm
Item number : RP-36502 A/B/C Head : 318.22 psi
Service : Booster Pump to PIA Peñas Blan Density / Specific gravity : - / 0.998
Flowserve reference : 2211452849 Pump speed : 3530 rpm
Date : Sept 02, 2021 R1 Ns / Nss : 367 / 10540 (US units)
Test tolerance : ANSI/HI 14.6 Grade 1U
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
11.73 in Rated
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.15.1
Hydraulic Datasheet
Customer : ECOPETROL, S.A. Pump / Stages : 2K50-32-315A-OP /1
Customer reference : SISTEMAS DE BOMBEO CENTRIF... Based on curve no. : E591/0125/2
Item number : RP-36502 A/B/C Flowserve reference : 2211452849
Service : Booster Pump to PIA Peñas Blan Date : Sept 02, 2021 R1
Operating Conditions Materials / Specification
Capacity (rated/normal) : 157.3 USgpm / - Material column code : SD
Water capacity (CQ=1.00) :- Pump specification :-
Total developed head : 318.22 psi Other Requirements
Water head (CH=1.00) :- Hydraulic selection : No specification
NPSHa/NPSHa less margin : 30.1 ft / - Construction : No specification
Maximum suction pressure : 0.0 psig Test tolerance : ANSI/HI 14.6 Grade 1U
Liquid Driver Sizing : Rated Power
Liquid type : Other Performance data based on standard impeller
Liquid description :- Seal configuration : Single Seal
Temperature : 105 °F
Density / Specific gravity : - / 0.998
Solid Size - Actual / Limit : - / 0.3940 in
Viscosity / Vapor pressure : 0.94 cP / 1.28 psia
Performance
Hydraulic power : 29.2 hp Impeller diameter
Pump speed : 3530 rpm Rated : 11.73 in
Pump overall efficiency (CE=1.00) : 30.0 % Maximum : 12.60 in
NPSH required (NPSH3) : 3.6 ft Minimum : 9.57 in
Rated brake power : 97.3 hp Ns / Nss : 367 / 10540 (US units)
Minimum continuous flow : 21.1 USgpm
Maximum brake power : 125 hp Maximum head at rated diameter : 344.72 psi
Driver power rating : 125 hp / 93.2 kW Flow at BEP : 206.6 USgpm
Casing working pressure : 344.9 psig Flow as % of BEP : 76.1 %
(based on shut off @ cut dia/rated SG) Efficiency at normal flow :-
Maximum allowable : 362.6 psig Impeller diameter ratio (rated/max) : 95.0 %
Hydrostatic test pressure : 543.9 psig Head rise to shut off : 8.3 %
Estimated rated seal chamber pressure : 59.9 psig Total head ratio (rated / max) / (max / rated) : 89.0 % / 112.4 %
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
11.73 in Rated
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.15.1
Construction Datasheet
Customer : ECOPETROL, S.A. Pump / Stages : 2K50-32-315A-OP /1
Customer reference : SISTEMAS DE BOMBEO CENTRIF... Based on curve no. : E591/0125/2
Item number : RP-36502 A/B/C Flowserve reference : 2211452849
Service : Booster Pump to PIA Peñas Blan Date : Sept 02, 2021 R1
Construction Driver Information
Nozzles Size Rating Face Position Manufacturer : WEG
Suction 50 mm PN50 RF End Power : 125 hp
Discharge 32 mm PN50 RF Top Service factor (requested / actual) : 1.15 / 1.15
Casing mounting : Foot Synchronous speed : 3600 rpm
Casing split : Radial Orientation / Mounting : Horizontal / Foot
Impeller type : Semi Open Driver type : NEMA
Bearing type (radial) : Ball Frame-size / material
Bearing number (radial) : 6309 Enclosure :TEFC
Bearing type (thrust) : Dbl.Ball Hazardous area class :
Bearing number (thrust) : 7309 Pair Explosion 'T' rating : Refer to Factory
Bearing lubrication : Flood Volts / Phase / Hz : 460 / 3 / 60 Hz
Rotation (view from driver) : CW per Hyd. Institute Amps-full load/locked rotor :-/-
Materials Motor starting :VFD
Casing : ASTM A995 Gr5A Insulation :-
Impeller : ASTM A995 Gr5A Temperature rise :-
Seal chamber : ASTM A995 Gr5A Bearings : Ball
Shaft : ASTM A276 S32760 Lubrication : Grease
Sleeve : No sleeve fitted Motor mounted by : Flowserve
Baseplate, Coupling and Guard Sound Pressure (dBA @ 1.0 m)
Baseplate type : Folded Base Driver, expected : 81.0 dBA
Baseplate material : Mild Steel Pump & driver, estimated : 82.0 dBA
Baseplate size : ISO 3661 No9 Seal Information
Coupling manufacturer : Thomas Arrangement : Cartridge
Coupling size : XTSR 71 DBSE 7 Size : 45 mm
Coupling / Shaft guard : Manufacturer / Type : Flowserve / ISC2 Single
Shaft / seal guard : Material code (Man'f/API) : B0488718 / 9ZAN
Weights (Approx.) Internal neck bushing : Not Fitted
Bareshaft pump (net) : 257.9 lb Gland
Baseplate (net) : 449.7 lb Gland material : Duplex 2205
Driver (net) :- Flush : 3/8" NPT
Shipping gross weight/volume : 920.0 lb / *** Vent :
Testing Drain : 3/8" NPT
Hydrostatic test : Non witnessed Auxiliary seal device :
Performance test : Non witnessed Piping
NPSH test : None Seal flush plan : Plan 11
Paint and Package Seal flush construction :-
Pump paint : Unpainted Seal flush material :-
Base grout surface prep : Not Applicable Aux seal flush plan -
: 62M
Shipment type : Export Aux seal flush construction :-
Aux seal flush material :-
Notes
- Subject to 3 dBA tolerance
ver. 11-6-15
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.15.1
Customer : ECOPETROL, S.A. Capacity : 157.3 USgpm
Item number : RP-36502 A/B/C Head : 318.22 psi
Service : Booster Pump to PIA Peñas Blan Density / Specific gravity : - / 0.998
Flowserve reference : 2211452849 Pump speed : 3530 rpm
Pump size & type / Stages : 2K50-32-315A-OP /1 Ns / Nss : 367 / 10540 (US units)
Based on curve no. : E591/0125/2
Impeller diameter : 11.73 in
Date : Sept 02, 2021 R1
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.15.1
