Scribd
Upload
49 views1 page

Adobe Scan 22-Sept-2024

Uploaded by

kaurtanisha235
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views1 page

Adobe Scan 22-Sept-2024

Uploaded by

kaurtanisha235
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PROJECTS

1. To study various tactors on which the internal resistance/e.m.f of a cell depends.


2. To study the variations, in current fiowing in a circuit containing an LDR, because of a variation
(a) the power of the incandescent lamp, used to "illuminate' the LDR. (Keeping all the lamps at a fixed
distance). (b) the distance of a incandescent lamp, (of fixed power), used to illuminate' the LDR
3. To find the refractive indices of (a) water (b) oil (transparent) using a plane mirror, a cquiconvex lens
(made from a glass of known refractive index) and an adjustable object needle.
4. Todesign an appropriate logic gate combination for a given truth table.
5. To investigate the relation between the ratio of () output and input voltage and (ii) number of turns in
the secondary coil and primary coil of a self designed transformer.
6. To investigate the dependence of the angle of deviation, on the angle of incidence, using a hollowprism
filled, one by one, with different transparent fluids.
7. To estimate the charge induced on each one of the two identical styrofoam (or pith) balls suspended
in a vertical plane by making use of Coulomb's law.
8. To set up a common base transistor circuit and to study its input and output characteristic and to
calculate its current gain.
9. To study the factor, on which the self inductance of a coil depends, by observing the effect of this coil.
when put in series with a resistor/(bulb) in a circuit fed up by an ac source of adjustable frequency.
10. To construct a switch using a transistor and to draw the graph between the input and output voltage
and mark the cut-off, saturation and active regions.
11. To study the earth's magnetic field using a tangent galvanometer.

You might also like