BOSCH - VM Configuration
BOSCH - VM Configuration
Table of Contents
Table of Contents – 2
EWD697 - Bosch Operation and Maintenance Guide – BOSCH - VM Configuration
xit
You will find here under a table that gives the jump host definition and properties :
Jump Factory Definition of usage host name IP to used in IP to use in
definition E2C rb_pam to get
the password
for ssh
connection
from VPN
Jump Central Need for gwaf access and SI0VM03853 10.30.129.97 10.139.2.39
Host SL1 functional ping
Jump Miskolc Need for all nodes in miskolc SI0VM03855 10.30.129.99 10.139.173.138
Host SL4
Important :
What you need to understand about the vpn setup is when you perform, for example, an ssh
connection to the ip 10.30.5.238 (jump host SL1 in E2C) then this ip will be translated by the
vpn gateways to the ip 10.139.2.39 on Bosch premises.
It is why you have to use the ip on the Bosch network addressing plan on rb_pam web
application to get the password for your ssh connection.
This particular translation is only required for jump servers because once you get connected to
the jump you are directly on the Bosch network.
Name Hostname IP
3 Central Site Q
Name Side Hostname IP vCPUS RAM JumpHost to use
Name Hostname IP
Docker Registry VM for side Side RNGVM00308 10.124.7.10 4vCPU 4GB test-dreg-
3 3 s3vm1
Docker Registry VM for side Side RNGVM00355 10.124.7.22 4vCPU 4GB test-dreg-
3 3 s3vm2
OPCUA LB 10.73.1.157:30160
Name Hostname IP
Database LB 10.76.63.138
OPCUA LB 10.76.63.139
OPCUA VIP -