Typhlosion
Typhlosion
Do not sell, copy, or distribute this pattern. You may sell items made
from pattern.
This character is owned by Nintendo, and this pattern by Izzy King
1. MR 6 (6)
Stop here and place eyes between rows 10 and 11, approximately 16 sts apart
1. MR 6 (6)
1. CH 3 (2)
1. MR 6 (6)
1. MR 5 (5)
1. MR 4 (4)
1. MR 6 (6)
Stuff body and then sew head onto the body, making sure that the MR row of head is pointing up at an angle, you will need to
sew some of the head past the FO row of the body so that it stays in this position
Pin the back stripe onto the body, making sure to keep it straight and sew on
Pin on feet and arms, sewing onto the body, stuffing lightly as you go on
Pin on the tails next to one another onto the bottom of the body and sew on
Pin and sew the ears on either side of the head, stuffing as you go on
Cut pieces of red and yellow yarn to desired length of flames, before threading them through sts of the back stripe, where the
head meets the body, and tie these so they are secure. Then separate the strands of the yarn and brush through to give it a
felted look. Lots of yarn will come off as fluff in the process so make sure to use more than you think you will need. Make sure
to lightly brush away from the body so no sts are pulled.