Kaishan Technologies

Rotary Screw Air

Compressor

KRSD 100HP
Parts Manual

October 2022

(230V/460V/575V/60HZ/FS/VSD/ASME/UL)

Serial numbers starting on 752008 or higher

 TABLE OF CONTENTS

Service Parts ..................................................................................................................... 3

Serial Number ................................................................................................................... 3
Fluid Specification ............................................................................................................. 4
Spare Parts ....................................................................................................................... 5
Airend and Inlet valve........................................................................................................ 6
Base Mounting ................................................................................................................ 10
Reservoir ........................................................................................................................ 12
Driving System and Electrical Motor ................................................................................. 14
Air Cooler ....................................................................................................................... 16
Fluid Piping ..................................................................................................................... 18
Air Piping(Fixed speed) .................................................................................................... 20
Air Piping(VSD)................................................................................................................ 22
Cabinet(Fixed speed) ....................................................................................................... 24
Cabinet(VSD) .................................................................................................................. 26
Electrical Enclosure(Fixed speed) ...................................................................................... 28
Electrical Enclosure(VSD) ................................................................................................. 30
Decals ............................................................................................................................ 32
Standard Terms and Conditions........................................................................................ 35
Appendix ........................................................................................................................ 38
Contact Information ........................................................................................................ 39

KRSD series Page 2

 Service Parts

The following information must be provided for ordering service parts:

1. The serial number of unit must be provided. It will be verified to ensure correct
replacement parts are ordered.

2. Service parts must be ordered from closest authorized distributor.

3. Exact part number, quantity and delivery method must be provided.

All service parts must be ordered through nearest authorized distributor. Insist on genuine
manufacturer parts only. Failure to do so may void product warranty.

Serial Number

The unit serial number can be found on serial number tag, which is located on the cabinet
corner post of the unit. The serial number tag is shown as follows.

KRSD series Page 3

 Fluid Specification
All KRSD Compressors must use Kaishan Technologies recommended fluid for maintenance.

KRSD series Page 4

 Spare Parts

Recommended spare parts are shown as follows:

ITEM No. QTY PART NUMBER DESCRIPTION

1 1 56020 300440 Air filter element
2 1 07709 13530 20 Oil filter
3 1 55220 273360 Fluid/air separator element

KRSD series Page 5

 Airend and Inlet valve
（115/125PSI）

KRSD series Page 6

 Airend and Inlet valve
（115/125PSI）

NO. PN DESCRIPTION QTY REMARK

1 01307 20040 00 Bolt 4 M20X40
2 01365 20000 00 Washer 4 20
3 92433 01001 60 Airend support 1
4 1040101 Airend 1
5 02901 18000 30 O-ring 1 180X3.55
6 01663 00000 00 Inlet valve 1
Spring A, Guidance tape A,
Spring B, O-ring 180x3,55,
6A* 04002 00125 00 Inlet valve kit 1
Guidance tape B, O-ring
235x5.3, O-ring 150x3.55.
6B* 01692 03000 01 Check valve, inlet valve 1
6C* 01692 00010 03 Blowdown valve 1
7 01512 06110 00 Joint 1
8 92433 01100 01 Oil return pipe 1
9 02809 00102 00 Air filter indicator 1
10 07702 02030 44 Air filter 1
11 04401 13015 00 Hoop 1
12 02907 15130 66 Flexible pipe 1
13 04401 14516 50 Hoop 1
14 01513 06100 00 Joint 1
15 01610 03000 00 Check valve 1
16 01322 16000 00 Nut 4 M16
17 01365 16000 00 Washer 4 16
18 01392 16045 00 Stud 4 AM16×45
19 02901 03250 30 O-ring 1 32.5X3.55
20 22435 06200 25 Elbow 1 G1.25-M45X2
21 02901 03870 30 O-ring 1 38.7X3.55
22 02201 00032 00 Screw washer 1
23 02217 13004 16 Gasket 1
24 92433 03001 01 Connecting pipe 1 SKKN126
25 01392 12040 00 Stud 4 AM12×40
26 01365 12000 00 Washer 4 12
27 01322 12000 00 Nut 4 M12
28 02201 01215 00 Screw washer 1
29 02901 00950 10 O-ring 1 9.5X1.8
30 18404 03100 00 Plug 1 M12X1.5
*Not shown in the drawing

KRSD series Page 7

 Airend and Inlet valve
（150PSI）

KRSD series Page 8

 Airend and Inlet valve
（150PSI）

NO. PN DESCRIPTION QTY REMARK

1 01307 20040 00 Bolt 4 M20×40
2 01365 20000 00 Washer 4 20
3 92433 01001 60 Airend support 1
4 4060201 Airend 1
5 02901 15000 30 O-ring 1 150X3.55
6 01664 00000 00 Inlet valve 1
Guidance tape 1, O-ring
235x5.3, Spring 1,
6A* 04002 00105 02 Inlet valve kit 1 Spring 2,O-ring
87.5x3.55, Guidance tape
2,O-ring 150x3.55
6B* 01692 03000 01 Check valve 1
6C* 01692 00010 03 Blowdown valve 1
7 01512 06110 00 Joint 1
8 92433 01100 60 Oil return pipe 1
9 02809 00102 00 Air filter indicator 1
10 07702 02030 44 Air filter 1
11 04401 13015 00 Hoop 2
12 02907 13130 68 Flexible pipe 1
13 01513 06100 00 Joint 1
14 01610 03000 00 Check valve 1
15 01322 12000 00 Nut 8 M12
16 01365 12000 00 Washer 8 12
17 01392 12040 00 Stud 8 AM12×40
18 02901 03250 30 O-ring 1 32.5X3.55
19 19316 06006 00 Elbow 1
20 02901 03000 30 O-ring 1 30X3.55
21 02201 00025 00 Screw washer 1
22 02217 10604 16 Gasket 1
23 92533 03001 01 Connecting pipe 1
24 02201 01215 00 Screw washer 1
25 02901 00950 10 O-ring 1 9.5X1.8
26 18404 03100 00 Plug 1 M12X1.5
*Not shown in the drawing

KRSD series Page 9

 Base Mounting

KRSD series Page 10

 Base Mounting
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

1 92433 02010 01 Base 1
2 02905 00002 00 Absorber 6
3 01365 14000 00 Washer 14 14
4 01307 14030 00 Bolt 14 M14X30
5 01307 12030 00 Bolt 1 M12×30
6 01365 12000 00 Washer 5 12
7 01307 12025 00 Bolt 4 M12×25
8 20104 02001 00 Bolt 4
9 01365 22000 00 Washer 4 22
10 01322 22000 00 Nut 4 M22
11 19441 02001 01 Air filter support 1
12 99136 02001 00 Fixing plate,shipping 1

KRSD series Page 11

 Reservoir

KRSD series Page 12

 Reservoir
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

1 01307 14030 00 Bolt 4 M14X30
2 01365 14000 00 Washer 4 14
19333 03010 00 1 ASME
3 Reservoir
1933 03010 92 1 GB
4 13315 03005 00 Plug 1 M14X1.5
5 01534 14000 00 Bonded washer 1 14
6 92233 03006 00 Drain pipe 1
7 02901 01600 20 O-ring 1 16X2.65
8 13315 03006 00 Joint 1
9 01613 01500 00 Ball valve 1 DN15
10 99121 03002 00 Elbow 1
11 13315 03001 00 Hollow bolt 2 M10X40
12 02901 01060 10 O-ring 4 10.6X1.8
13 13315 03002 00 Oil sight glass 1
14 02201 03320 00 Screw washer 1
15 02901 03350 30 O-ring 1 33.5X3.55
16 13340 03003 00 Plug 1
17 02801 06308 00 Pressure gage 1 axial
18 02216 22273 16 Gasket 2
19 55220 273360 Fluid/air separator element 1
20 19333 03010 60 Top cover 1
21 01306 16065 00 Bolt 12 M16X65
22 01365 16000 00 Washer 20 16
23 01306 16070 00 Bolt 8 M16X70
24 01322 16000 00 Nut 8 M16
25 02216 06516 06 Flange gasket 2
26 19333 03001 10 Flexible pipe 1

KRSD series Page 13

 Driving System and Electrical Motor

KRSD series Page 14

 Driving System and Electrical Motor
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

62075 46642 25 460V/Fixed speed/IE3
62075 36642 25 230/460V/Fixed speed/IE3
1 62075 46942 25 Motor 1 460V/VSD/IE3
62075 58642 25 575V/VSD
62075 38942 35 575V/Fixed speed
2 01347 10010 00 Set screw 2 M10X10
3 01905 06506 50 Half coupling 1
4 01908 06500 00 Elastomer 1
5 01905 06505 50 Half coupling 1
6 0880103001 Connecting cylinder 1
7 01910 12130 10 Connecting cylinder cover 2
8 01307 08020 00 Bolt 8 M8X20
9 01365 08000 00 Washer 8 8
10 01366 08000 00 Washer 8 8
11 01344 12030 00 Bolt 4 M12x30
12 01365 12000 00 Washer 4 12
13 01322 16000 00 Nut 8 M16
14 01365 16000 00 Washer 8 16
15 01306 16070 00 Bolt 8 M16X70

KRSD series Page 15

 Air Cooler

KRSD series Page 16

 Air Cooler
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

1 07204 80013 00 Impeller 1
2 07205 80097 00 Net cover 1
3 01307 14035 00 Bolt 4 M14×35
4 01365 14000 00 Washer 4 14
5 01322 14000 00 Nut 4 M14
66002 46651 25 460V
6 66002 36651 25 Motor(WEG) 1 230/460
66002 58651 25 575V
7 01307 12025 00 Bolt 4 M12×25
8 01365 12000 00 Washer 4 12
9 01366 12000 00 Washer 4 12
10 01322 10000 00 Nut 8 M10
11 01365 10000 00 Washer 8 10
12 19458 05010 01 Cooler 1
13 92433 05002 01 Discharge pipe 1
14 01307 10025 00 Bolt 8 M10×25

KRSD series Page 17

 Fluid Piping

KRSD series Page 18

 Fluid Piping
（GROUP PN：）

No. PN DESCRIPTION QTY REMARK

1 Nylon pipe 1
2 01511 06100 00 Joint 1
3 01613 00600 99 Sample valve 1
4 98018 07011 06 Joint 1
5 92433 06005 01 Oil pipe 1 Inlet airend
6 02901 03250 30 O-ring 5 32.5X3.55
7 19316 06006 00 Elbow 2
8 02901 03000 30 O-ring 6 30X3.55
9 02201 00025 00 Screw washer 6
10 13315 07003 09 Joint 1
11 02901 02580 30 O-ring 1 25.8X3.55
12 18404 06001 00 Joint 1 Inet thermal valve
13 02901 03350 30 O-ring 2 33.5X3.55
14 98018 06003 00 Hollow bolt 1
15 01307 08020 00 Bolt 2 M8×20
16 01365 08000 00 Washer 2 8
17 92433 06001 01 Fixing plate 1
18 01611 02583 07 Thermal valve 1
Spring, Valve
18A* 04004 00021 00 Thermal valve kit 1 element, Sleeve,
O-ring
19 07709 13530 20 Oil filter 1
20 92433 06002 01 Fixing plate 1
21 01307 12030 00 Bolt 2 M12×30
22 01365 12000 00 Washer 6 12
23 01322 12000 00 Nut 2 M12
24 01307 12025 00 Bolt 4 M12×25
25 19315 06001 09 Joint 3 G1-M45x2
26 92433 06003 01 Oil pipe 1 Inlet cooler
27 92433 06004 01 Oil pipe 1 Outlet cooler
*Not shown on the drawing.

KRSD series Page 19

 Air Piping(Fixed speed)

KRSD series Page 20

 Air Piping(Fixed speed)
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

1 02201 00050 00 Screw washer 2
2 02901 05600 30 O-ring 2 56X3.55
3 19315 07007 09 Joint 2
4 02901 05150 30 O-ring 2 51.5X3.55
5 92433 07005 01 Discharge pipe 1
6 01612 05001 00 MPV 1
Check valve element,
Spring A,O-ring
6A* 04006 05001 00 MPV kit 1 54.5x3.55, Valve
element, O-ring 75x3.55,
Spring B
7 98018 07003 00 Joint 1
8 01513 06100 00 Joint 2
9 21315 03003 01 Joint 1
10 01534 12000 00 Bond washer 1 12
11 01307 06020 00 Bolt 2 M6×20
12 01365 06000 00 Washer 2 6
13 01513 06670 00 Joint 1
14 92233 07140 00 Control pipe 1
15 92233 07100 00 Blowdown pipe 1
16 02901 01600 20 O-ring 2 16X2.65
17 13315 03006 00 Joint 1
18 20412 07005 00 Joint 1 R1/2-M27X1.5
19 01603 22012 11 Solenoid valve 1 16bar,12
20 18404 07110 00 Joint 1 R0.5-R0.5
21 01610 02000 03 Check valve 2 2-RP1/4
22 01512 06130 00 Joint 3
23 92233 07120 00 Control pipe 1
24 01513 06130 00 Joint 2
25 02103 00008 00 Plug 1
26 98018 07011 00 Joint 4
27 11476 07003 00 Tee joint1/4 1
28 01604 00005 00 Direct proportion valve 1
29 92233 07130 00 Control pipe 1
30 02103 00006 00 Plug 1
31 02201 01215 00 Screw washer 1
32 02901 00950 10 O-ring 1 9.5X1.8
33 01610 01010 01 Oil sight check valve 1
34 92233 07110 00 Oil return pipe 1

KRSD series Page 21

 Air Piping(VSD)

KRSD series Page 22

 Air Piping(VSD)
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

1 02201 00050 00 Screw washer 2
2 02901 05600 30 O-ring 2 56X3.55
3 19315 07007 09 Joint 2 G2-M64X2
4 02901 05150 30 O-ring 2 51.5X3.55
5 92433 07005 01 Discharge pipe 1
6 01612 05001 00 MPV 1
Check valve element,
Spring A,O-ring
6A* 04006 05001 00 MPV kit 1 54.5x3.55, Valve
element, O-ring 75x3.55,
Spring B
7 98018 07003 00 Joint 1 R2-R2
8 01513 06100 00 Joint 2
9 21315 03003 01 Joint 1
10 01534 12000 00 Bond washer 1 12
11 01307 06020 00 Bolt 2 M6×20
12 01365 06000 00 Washer 2 6
13 92233 07100 00 Blowdown pipe 1
14 02901 01600 20 O-rinf 2 16X2.65
15 13315 03006 00 Joint 1
16 20412 07005 00 Joint 1 R1/2-M27X1.5
17 01603 22012 11 Solenoid valve 1 16bar,12
18 18404 07110 00 Joint 1 R0.5-R0.5
19 01512 06130 00 Joint 2
20 92233 07130 00 Control pipe 1
21 01513 06130 00 Joint 2
22 01610 02000 03 Check valve 1 2-RP1/4
23 98018 07011 00 Joint 1
24 02103 00006 00 Plug 1
25 02103 00008 00 Plug 1
26 92239 07120 00 Control pipe 1
27 02201 01215 00 Screw washer 1
28 02901 00950 10 O-ring 1 9.5X1.8
29 01610 01010 01 Oil sight check valve 1
30 92233 07110 00 Oil return pipe 1

*Not shown on the drawing

KRSD series Page 23

 Cabinet(Fixed speed)

KRSD series Page 24

 Cabinet(Fixed speed)
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

1 92433 08001 01 Support 1
2 92433 08002 01 Support 1
3 92433 08003 01 Support 1
4 92433 08004 01 Support 1
5 92433 08005 01 Beam 2
6 92433 08006 01 Support 2
7 92433 08007 01 Beam 2
8 92433 08008 01 Maintenance door 1
9 92433 08009 01 Door 2
10 92433 08100 01 Beam 1
11 92433 08110 01 Door 1
12 92433 08120 01 Beam 1
13 92433 08130 01 Top cover 1
14 92433 08140 01 Top net cover 1
15 92433 08150 01 Beam 1
16 92433 08160 01 Door 1
17 92433 08170 01 Beam 1
18 92433 08180 01 Air intake 1
19 92244 08190 01 Electric cabinet 1
20 92433 08200 01 Seal plate 2
21 92233 09001 00 Installation panel 1
22 02701 20601 00 Hinge 10
23 02702 71111 01 Lock 12
24 02702 20901 00 Hinge 2

KRSD series Page 25

 Cabinet(VSD)

KRSD series Page 26

 Cabinet(VSD)
（GROUP PN：）

NO. PN DESCRIPTION QTY REMARK

1 92433 08001 01 Support 1
2 92433 08002 01 Support 1
3 92433 08003 01 Support 1
4 92433 08004 01 Support 1
5 92433 08005 01 Beam 2
6 92433 08006 01 Support 2
7 92433 08007 01 Beam 2
8 92244 08008 001 Door 1
9 92433 08006 01 Door 2
10 92433 08100 01 Beam 1
11 92433 08110 01 Door 1
12 92433 08120 01 Beam 1
13 92433 08130 01 Top cover 1
14 92433 08140 01 Top net cover 1
15 92433 08150 01 Beam 1
16 92244 08160 01 Door 1
17 92433 08170 01 Beam 1
18 92433 08180 01 Air intake 1
19 92244 08190 01 Electric cabinet 1
20 92433 08200 01 Seal plate 2
21 92239 09001 00 Installation panel 1
22 02701 20601 00 Hinge 10
23 02702 71111 01 Lock 12
24 02702 20901 00 Hinge 2
07706 98052 00 Electrical cabinet inlet filter frame 2
160004-001 Filter element
07211 22081 40 Electrical cabinet fan 2

KRSD series Page 27

 Electrical Enclosure(Fixed speed)

KRSD series Page 28

 Electrical Enclosure(Fixed speed)
（230V/460V/FS）

NO. PN DESCRIPTION QTY REMARK

1 08703 00004 00 Terminal block 18 DZ
2 02819 06526 00 Miniature circuit breaker 1 Q1
3 02820 00001 00 Fuse block 2 FU3-FU4
4 02820 00001 00 Fuse block 2 FU1-FU2
5 02814 00080 00 Phase protector 1 XX
6 02818 05001 50 Transformer 1 T
7 02825 60025 01 Fan motor contactor 1 KM4
8 02811 00240 55 Controller 1 PLC
9 02824 20040 00 Fan motor transformer 1 CT2
10 08703 00240 00 Terminal block 3 TC2
11 08702 08050 00 Insulator 3 JYZ
12 02824 00400 01 Current transformer 1 CT1
13 02825 60205 06 AC contactor 1 KM1
14 02825 60205 06 AC contactor 1 KM2
15 09705 31954 20 Mechanical interlock 1 HS
16 02825 60205 06 AC contactor 1 KM3
17 02829 25065 01 Inlet wire copper bar 1 JXTP
18 02829 20225 01 Contactor copper bar 1 TP
19 02829 42524 50 Grounding copper bar 1 JDTP
20 02815 00202 02 Monitor 1 XSQ
21 02827 04844 00 Emergency button 1 JT
22 02827 04104 00 Emergency button support 1 JT
23 02810 00016 00 Pressure sensor 1 DP
24 02810 10004 00 Temperature sensor 1 DT
25 02810 10004 00 Temperature sensor 1 ST
*26 02821 10006 00 Fuse 2 FU1-FU2
*27 02821 10004 00 Fuse 2 FU3-FU4
Note：* Items are not shown on the drawing.

KRSD series Page 29

 Electrical Enclosure(VSD)

KRSD series Page 30

 Electrical Enclosure(VSD)
（460VSD)

NO. PN DESCRIPTION QTY REMARK

1 08703 00004 00 TERMINAL BLOCK 30 DZ
2 02814 00002 00 INTERMEDIA RELAY SEAT 1 KA6
3 02814 01102 00 INTERMEDIA RELAY HEAD 1 KA6
4 02818 03150 10 TRANSFORMER 1 T
5 02819 06526 00 BREAKER 1 Q1
6 02820 00001 00 FUSE BLOCK 2 FU1-FU2
7 02820 00001 00 FUSE BLOCK 3 FU5-FU7
8 02808 04524 00 POWER SWITCH 1 DR
9 02825 60012 00 FAN CONTACTOR 1 KM4
10 02824 20040 00 FAN MOTOR CURRENT TRANSFORMER 1 CT2
11 02825 60012 01 GROUNDING COPPER BAR 1 JDTP
12 08703 00095 00 TERMINAL BLOCK 3 TC
13 08704 20070 00 CABLE 2.4M BVR
14 02811 15154 47 MONITOR 1 XSQ
02827 04844 00 EMERGENCY BUTTON 1
15 JT
02827 04104 00 EMERGENCY BUTTON SUPPORT 1
16 02810 00016 00 PRESSURE SENSOR 1 DP
17 02810 10004 00 TEMP. SENSOR 1 DT
18 02810 10004 00 TEMP. SENSOR 1 ST
19 02828 50165 00 INVERTER 1 VSD
20 18423 09008 02 ELECTRIC PLATE 1 DKB
*21 02821 10006 00 FUSE 2 FU1-FU2
*22 02821 10002 00 FUSE 3 FU5-FU7
Note：* Items are not shown on the drawing.

KRSD series Page 31

 Electrical Enclosure

KRSD series Page 32

 Electrical Enclosure
（575V/FS）

NO. PN DESCRIPTION QTY REMARK

1 02818 05001 50 Transformer 1 T
2 02814 05169 00 Phase sequence protector 1 XX
3 02820 00001 00 Fuse block 2 FU3-FU4
4 02820 00001 00 Fuse block 2 FU1-FU2
5
6 02811 00220 55 Controller 1 PLC
7 08703 00095 00 Terminal block 18 DZ
8 08703 00095 00 Terminal 3 TC1
9 02824 00200 00 Current transformer 1 CT1
10 02825 60115 01 AC contactor 1 KM1
11 02825 60115 01 AC contactor 1 KM2
12 02825 60095 01 AC contactor 1 KM3
13 02825 60012 01 Fan motor contactor 1 KM4
14 02824 20040 00 Fan motor current transformer 1 CT2
15 08704 02070 00 Cable 1.2M BVR
16 08704 02035 00 Cable 2.0M BVR
17 02829 42524 50 Grounding copper bar 1 JDTP
18 02815 00202 02 Monitor 1 XSQ
19 02827 04844 00 Emergency button 1 JT
20 02827 04104 00 Emergency button seat 1 JT
21 02810 01082 00 Pressure sensor 1 DP
22 02810 04001 07 Temperature sensor 1 DT
23 02810 04001 07 Temperature sensor 1 ST
24 Electrical control board 1 DKB
25 02814 35156 22 Thermal relay 1 FR1
26 02814 36126 16 Thermal relay 1 FR2
*27 02821 10006 00 Fuse 2 FU1-FU2
*28 02821 10002 00 Fuse 2 FU3-FU4
Note：* Items are not shown on the drawing.

KRSD series Page 33

 Electrical Enclosure

KRSD series Page 34

 Electrical Enclosure
（575V/VSD）

NO. PN DESCRIPTION QTY REMARK

1 08703 00004 00 Terminal block 31 DZ
2 02814 00002 00 Intermediate relay seat 1 KA6
3 02814 01102 00 Intermediate relay head 1 KA6
4 02818 03150 10 Transformer 1 T
5 02820 00001 00 Fuse block 2 Q1
6 02820 00001 00 Fuse block 2 FU1-FU2
7 02820 00001 00 Fuse block 3 FU5-FU7
8 02808 04524 00 Power switch 1 DR
9 02825 60038 00 AC contactor 1 KM4
10 02824 20040 00 Fan motor current transformer 1 CT2
11 02829 42524 50 Grounding copper bar 1 JDTP
12 08703 00050 00 Terminal 3 TC
13 08704 02035 00 Cable 2.1M BVR
14 02811 15192 67 Monitor 1 XSQ
02827 04844 00 Emergency button 1
15 JT
02827 04104 00 Emergency button seat 1
16 02810 01082 00 Pressure sensor 1 DP
17 02810 04001 00 Temperature sensor 1 DT
18 02810 04001 00 Temperature sensor 1 ST
19 02828 35125 00 Inverter 1 VSD
20 Electrical control board 1 DKB
*21 02821 10006 00 Fuse 2 FU1-FU2
*22 02821 10002 00 Fuse 3 FU5-FU7
*23 02821 10006 00 Fuse 2 Q1
Note：* Items are not shown on the drawing.

KRSD series Page 35

 Decals

Decals information is shown as following.

KRSD series Page 36

 Decals

NOTE:
1. DECALS P/N : 142939

KRSD series Page 37

 Decals

NOTE:
1. DECALS P/N : 142939

KRSD series Page 38

 Standard Terms and Conditions
These terms and conditions govern the sale of Products (“Rotary Screw Air Compressors and
parts”) and provisions of services by Kaishan Technologies Compressor Co. Ltd (Seller) and its
authorized representative or buyer. These terms and conditions (“Agreement”) take precedence
over Buyer’s supplemental or conflicting terms and conditions to which notice of objection is
hereby given. Neither Seller’s commencement of performance or delivery shall be deemed or
construed as acceptance of Buyer’s supplemental or conflicting terms and conditions. Kaishan
Technologies Compressor’s failure to object to conflicting or additional terms will not change or
add to the terms of this agreement. Buyer’s acceptance of the Products and/or Services from
Seller shall be deemed to constitute acceptance of the terms and conditions contained herein.

Orders: All orders placed by Buyer are subject to acceptance by Seller. Orders may not be
canceled or rescheduled without Seller’s written consent. All orders must identify the products,
unit quantities, part numbers, applicable prices and requested delivery dates of the Products
being purchased. Seller may at its sole discretion allocate Product among its Buyer. Seller
may designate certain Products and Services as non-cancelable, non-returnable and the sale of
such Products shall be subject to the special terms and conditions contained in Seller’s Customer
Acknowledgement or Non-Returnable Product Form, which shall prevail and supersede any
inconsistent terms and conditions contained herein or elsewhere.
Prices: The prices of the Products are those prices specified on the front of the invoice or
contained within an agreed written contract. Price quotations shall automatically expire in thirty
(30) days from the date issued, or as otherwise stated in the quotation.
Taxes: Unless otherwise agreed to in writing by Seller, all prices quoted are exclusive of
transportation and insurance costs, duties, and all taxes including federal, state and local sales,
excise and value added, goods and services taxes, and any other taxes. Buyer agrees to
indemnify and hold Seller harmless for any liability for tax in connection with the sale, as well as
the collection or withholding thereof, including penalties and interest thereon. When
applicable, transportation and taxes shall appear as separate items on Seller’s invoice.
Payment: Payment may be made by check, money order, credit card, or wire transfer (all fees
are borne by the Buyer). Where Seller has extended credit to Buyer, terms of payment shall be
net thirty (30) days from date of invoice, without offset or deduction. On any past due invoice,
Seller may impose a monthly interest rate. If Buyer fails to make the required payments the
Seller will impose the interest rate each month. If Buyer fails to make each payment when it is
due, Seller reserves the right to withdraw credit and thereby suspend or cancel performance
under any or all purchase orders or agreements in which Seller has extended credit to Buyer.
In the event of default by Buyer, Seller shall be entitled to costs, fees, and expenses including but
not limited to recovery of attorney fees, court costs and fees, and collections costs.

KRSD series Page 39

 Standard Terms and Conditions

Delivery and Title: The locations of shipment delivery will be made according to the Seller and
Buyer agreement. Title and risk of loss pass to the Buyer upon delivery of the Product to the
carrier. Seller’s delivery dates are estimates only and Seller is not liable for delays in delivery or
for failure to perform due to causes beyond the reasonable control of the Seller, nor shall the
carrier be deemed an agent of the Seller. A delayed delivery of any part of an Order does not
entitle Buyer to cancel other deliveries. Kaishan Technologies Compressor will comply with
various federal, state and local laws and regulation concerning occupational health, safety and
environment concerns. Buyer has full responsibility to comply with those laws and regulations
during the installation and operation of the equipment.
Acceptance / Returns: Shipments will be deemed to have been accepted by Buyer upon delivery
of the said shipments to Buyer unless rejected upon receipt. Buyer shall perform all inspections
and tests. Buyer deems necessary as promptly as possible but in no event later than 7 days after
receipt of Products, at which time Buyer will be deemed to have irrevocably accepted the
Products. Any discrepancy in shipment quantity must be reported within 7 days after receipt of
Products. Buyer may not return Products without a Return Material Authorization (“RMA”)
number. RMA’s valid for 30 days from the date issued.
Standard Warranty: Buyer will honor Product warranties and indemnities authorized by the
manufacturer, including any transferable. 90 days warranty is given for service parts from
receipt date. Seller warrants to Buyer that Products purchased hereunder will conform to the
applicable manufacturer’s specifications for such products and that any value-added work
performed by Seller on such Products will conform to applicable Buyer’s specifications. If Seller
breaches this warranty, Buyer’s remedy is limited to (at Seller’s election) (1) refund of Buyer’s
purchase price for such Product (without interest), (2) repair of such Products, or (3)
replacement of such Products provided that such Products must be returned to Seller, along
with acceptable evidence of purchase within 13 days from date of delivery, transportation
charges prepaid. No warranty will apply if the Product has been subject to misuse, neglect,
accident or modification.
Limitation of Liabilities: Buyer shall not be entitled to, and Seller shall not be liable for, loss of
profit or revenue, promotional or manufacturing expenses, overheads expenses, business
interruption cost, loss of data, removal or reinstallation costs, injury to reputation of buyer,
punitive damages, loss of contractor orders or any indirect, special, incidental or consequential
damages of any nature. Buyer’s recovery from seller for any claim shall not exceed the purchase
price paid for the affected products irrespective of the nature of the claim whether in contract,
tort, warranty, or otherwise. Buyer will indemnify, defend and hold seller harmless from any
claims based on (a) Seller’s compliance with buyer’s designs, specifications, or instructions, (b)
Modification of any products by anyone other than Seller, or (c) use in combination with other
products not supplied by seller.

KRSD series Page 40

 Standard Terms and Conditions

Use of Products: Unless otherwise specified. Products sold by Seller are not designed, intended
or authorized for use in life support, life sustaining, nuclear, or other applications in which the
failure of such Products could reasonably be expected to result in personal injury, loss of life or
catastrophic property damage. If buyer uses or sales the Products for use in any such
applications: (1) Buyer acknowledges that such use or sale is at Buyer’s sole risk; (2) Buyer agrees
that Seller and the manufacturer of the Products are not liable, in whole or in part, for any claim
or damage arising from such use; and (3) Buyer agrees to indemnify, defend and hold Seller and
the manufacturer of the Products harmless from and against any and all claims, damages, losses,
costs, expenses and liabilities arising out of or in connection with such use or sale.
Force Majeure: Seller is not liable for failure to fulfill its obligations for any accepted Order or for
delays in delivery due to causes beyond Seller’s reasonable control including, but not limited to,
acts of God, natural or artificial disaster, riot, war, strike, delay by carrier, shortage of Product,
acts or omissions of other parties, acts or omissions of civil or military authority, Government
priorities, changes in law, material shortages, fire, strikes, floods, epidemics, quarantine
restrictions, acts of terrorism, delays in transportation or inability to obtain labor, materials or
products through its regular sources, which shall be considered as an event of force majeure
excusing Seller from performance and barring remedies for non-performance. In an event of
force majeure condition, the Seller’s time for performance shall be extended for a period equal
to the time lost as a consequence of the force majeure condition without subjecting Seller to any
liability or penalty. Seller may, at its option, cancel the remaining performance, without any
liability or penalty, by giving notice of such cancellation to the Buyer.
General: (a) Seller will comply with state law for any dispute from buyer. (b) Buyer may not
assign this Agreement without the prior written consent of Seller. Seller or its affiliates may
perform the obligations under this Agreement. This Agreement is binding on successor and
assigns, (c) Products, including software or other intellectual property, are subject to any
applicable rights of third parties, such as patents, copyrights and/or user licenses.

KRSD series Page 41

 Appendix
(If your machine is standard, this page is blank.)

KRSD series Page 42

 Contact Information

Kaishan Compressor, LLC.,

Add.: 15445 Industrial Park Dr., Loxley, AL, Post code: 36551
Office number: +1 251-202-0577
www.KaishanUSA.com

KRSD series Page 43