0% found this document useful (0 votes)
18 views2 pages

Strip Bags - 3M

Uploaded by

john mcwade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
18 views2 pages

Strip Bags - 3M

Uploaded by

john mcwade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

STRIP BAGS 07/03/17

Article Information Letter


Copyright,2017Aearo Technologies LLC
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Aearo Technologies
LLC, Aerospace and Commercial Transportation Division, 3M company products is allowed provided that: (1) the
information is copied in full with no changes unless prior written agreement is obtained from Aearo Technologies LLC, and
(2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

Document Group: 37-9691-9 Version Number: 1.00


Issue Date: 07/03/17 Supercedes Date: Initial Issue

Product identifier
STRIP BAGS

Recommended use
AIRCRAFT INSULATION

PN 81012-230000: 1” 0.6PCF FIBERGLASS , WITH COVERING FILM LAMAGUARD 12


PN 81012-232000: 1” 0.6PCF (+) 1/2” 0.6PCF FIBERGLASS, WITH COVERING FILM LAMAGUARD 12 FILM

Supplier's details
MANUFACTURER: Aearo Technologies LLC
DIVISION: Aearo Technologies LLC
ADDRESS: 7911 Zionsville Rd., Indianapolis, IN 46268
Telephone: 317-692-1111

Emergency telephone number


1-800-364-3577 or (651) 737-6501 (24 hours)

This Article Information Letter is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has
not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health
Administration’s Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: “Article”
means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during
manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and
(iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a
hazardous chemical, and does not pose a physical or health risk to employees.

This product, when used under reasonable conditions and in accordance with the directions for use, should not present a
health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use
may affect the performance of the product and may present potential health and safety hazards.

DISCLAIMER: The information in this Article Information Letter (AIL) is believed to be correct as of the date issued.Aearo
Technologies LLCMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE
OF PERFORMANCE OR USAGE OF TRADE.User is responsible for determining whether theAearo Technologies
LLCproduct is fit for a particular purpose and suitable for user's method of use or application.Given the variety of factors that
can affect the use and application of aAearo Technologies LLCproduct, some of which are uniquely within the user's
knowledge and control,it is essential that the user evaluate theAearo Technologies LLCproduct to determine whether it is fit
for a particular purpose and suitable for user's method of use or application.

__________________________________________________________________________________________

Page 1 of 2
STRIP BAGS 07/03/17

Aearo Technologies LLCprovides information in electronic form as a service to its customers. Due to the remote possibility
that electronic transfer may have resulted in errors, omissions or alterations in this information,Aearo Technologies
LLCmakes no representations as to its completeness or accuracy. In addition, information obtained from a database may not
be as current as the information in the SDS available directly fromAearo Technologies LLC

__________________________________________________________________________________________

Page 2 of 2

You might also like