PREMIER EPOXY

MATERIAL SAFETY DATA SHEET

SECTION I PRODUCT INDENTIFICATION

PRODUCT NAME EPOXY RESIN
CHEMICAL CALSSIFICATION EPOXY RESIN
DISTRIBUTOR GEORGE AND RUBIAH TRADING CO. L.L.C.
AL QUSAIS INDUSTRIAL AREA#3,
DUBAI, U.A.E.
CONTACT 04 2284455
EMERGENCY CONTACT 055-2332081

SECTION II HAZARDOUS INGREDIENTS

HAZARDOUS IDENTIFICATION NON HAZARDOUS
RISK WARNING  May cause allergic skin reaction
 Cause eye irritation
 Cause skin irritation
 Harmful if swallowed
PRECAUTIONARY MEASURES  Avoid eye and skin contact
 Wear safety glasses
 Use protective gloves
 For eye contact, immediately flush eyes with plenty of
water for at least 15 minutes and promptly get medical
attention
 For skin contact, wash with plenty of soap and water
 Keep out of sewers, storm drains, surface water, and
rivers.
SPECIFIC HAZARDS --

SECTION III COMPOSITION OF PRODUCT

CHEMICAL CHARACTERIZATION MIXTURE
INGREDIENTS CAS NO. %,WT/WT`
EPOXY RESIN 25068-38-6 90-100
SILICONE DIXIODE 14808-60-7 10~0

SECTION IV FIRST AID MEASURES

P.T.O.

1
FIRST AID MEASURES FOR Inhalation：Not expected via this path. In case of
DIFFERENT EXPOSURES inhalation, remove to fresh air. Get medical
attention if ill effects persist.
Skin Contact：Immediately remove product from skin
with dry cloth or towel, and wash exposed area
withsoap or waterless cleanser. Get medical
attention if irritation or other ill effects develop
or persist.
Eye Contact：Immediately flush eyes with plenty of
water for at least 15 minutes and promptly
get medical attention.
Ingestion：Get medical attention. Do not induce
vomiting unless directed to do so by
medical personnel.
Signs and Symptoms of May cause skin and eye irritation. May cause allergic skin
Overexposure reaction.

 Respiratory protection: No respiratory protection

Personal protection for first aid should be needed
and rescue personnel  Eye protection: Use safety glasses
 Hand protection: Wear chemical resistant gloves

Note to physicians: Treat symptomatically.

SECTION V Fire Fighting Measures

Extinguishing Media Water spray, foam, dry chemical, or carbon dioxide.
Special Hazards None
Special Fire Fighting Procedures According to local emergency plan, determine the need to
evacuate or isolate the area. Use water spray to cool fire-exposed
containers
Protective Equipment for Fire Wear positive pressure self–contained breathing apparatus (SCBA)
Fighters and full protective equipment.

SECTION VI Accidental Release Measures

Personal Precautions Avoid eye and skin contact. Do not take internally. Keep out
people who do not wear protective equipment until the whole
contaminated area is cleaned. Refer to Section 8 for Exposure
controls / personal protection and Section 7 for Handling and
storage
Environment Precautions Keep out of sewers, storm drains, surface water, and rivers by
using sand, earth or other appropriate barriers.
Cleanup According to local emergency plan, determine the need to
evacuate or isolate the area. Follow all personal protective
equipment recommendations described in this MSDS. Scrape up
and wipe with suitable materials, (i.e., earth, absorbent paper,
and rag), and place in appropriate containers. Laws and
regulations may apply to releases and disposal of this material, as
well as those materials and items employed in the cleanup of
releases. Users should determine which laws and regulations are

2
 applicable.

SECTION VII Handling and Storage

Handling Avoid prolonged or repeated contact with skin. Avoid contact
with eyes. Avoid contact with skin and clothing. Wash
thoroughly after handling. Avoid use of electric band heaters.
Failures of electric band heaters have been reported to cause
drums of liquid epoxy resin to explode and catch fire.
Application of a direct flame to a container of liquid epoxy resin
can also cause explosion and/or fire.
Storage Keep container closed. Keep away from water, moisture, heat
and oxidizing materials. Low temperature store at ＜25oC.

SECTION VIII Exposure Controls / Personal Protection

Engineering Controls：Mechanical (general)：Recommended. Local
Exhaust：Recommended.
(Control Parameters)：
HAZ. INGREDIENTS CAS NO. EXPOSURE LIMITS
EPOXY RESIN 25068-38-6 NOT APPLICABLE
ADDITIVE - NOT APPLICABLE
Biological Exposure Indices (BEIs): -

Personal Protective Equipment  Respiratory Protection：No respiratory protection

should be needed
 Hand Protection: Wear protective gloves
 Eye / Face Protection：Wear safety glasses
 Skin Protection: Use protective clothing chemically
resistant to this material. Selection of specific items
such as face shield, boots, apron, or full body suit will
depend on the task. Remove contaminated clothing
immediately, wash skin area with soap and water, and
launder clothing before reuse or dispose of properly.
Items which cannot be decontaminated, such as shoes,
belts and watchbands, should be removed and disposed
of properly.)
 Additional Protective measures: Shower and eye rinse
apparatus should be needed at work place, and workers
should be trained to use it correctly.

Hygiene Measures Exercise good industrial hygiene practice. Wash after handling,
especially before eating, drinking or smoking. Keep a clean
work place.

SECTION IX Physical and Chemical Properties

Appearance：Liquid Color：Clear
Threshold Limit Value of Smell：Not Odor：Some Odor
determined
(pH Value：Not determined) (Melting Point：Not determined
Flammability（solid, gas）：No Boiling Point / Range：Not determined

3
Flash Point (Close Cup) : > 300 ℃ Decomposition Temperature: Not determined
Auto ignition Temperature：Not Explosive Properties：No
determined)
Vapor Density(air=1)：Not determined Vapor Pressure：Not determined
Solubility：Not determined (Specific Density (water=1)：1.10
Evaporation Rate (ratio to Butyl Octanol／Water Partition ratio（log Kow）：Not
determined
acetate)：Not determined

SECTION X Stability and Reactivity

Stability: Stable
Possible Hazardous reaction：Water and heat.
Condition to Avoid： Avoid temperatures above 300 °C. Potentially violent decomposition can occur
above 350 °C. Generation of gas during decomposition can cause pressure in closed systems.
Pressure build-up can be rapid.

Materials to Avoid：Acids, bases, amines and oxidizing agents

Hazardous Decomposition Products：Uncontrolled exothermic reaction of epoxy resins release
phenolics, carbon dioxide, and carbon monoxide.

SECTION XI Toxicological Information

Exposure Route：Skin contact, eye contact, and accidental ingestion
Symptom：Corrosive to eye and skin. Cause burns. Cause respiratory tract irritation.
Acute Toxicity
INGREDIENTS CAS NO. EXPOSURE LIMITS
Rat, oral: >5,000 mg/Kg
EPOXY RESIN 25068-38-6
Rabbit, skin:>20,000mg/Kg
Inhalation：Not expected via this path
Skin Contact：May cause irritation
Eye Contact：May cause irritation
Ingestion：Harmful if swallowed
Chronic Toxicity and long-term effects
Inhalation：Not expected via this path
Skin：May cause allergic skin reaction
Ingestion：Very low toxicity if swallowed. Harmful effects not anticipated from swallowing small
amounts
Note: The above listed potential effects of overexposure are based on actual data, the results of
studies performed upon similar compositions, component data, and/or expert review of the
products.

SECTION XII Ecological Information

Ecological Toxicity：Acute category 3. May be harmful to aquatic organisms. Estimated LC50(fish):
>10mg/L ~ < 100 mg/L.
Permanence and Biodegradability：BOD20 或BOD28/ThOD(epoxy) < 2.5%.
Bioaccumulation：Moderate，BCF(epoxy):100 – 3000.

4
Mobility in Soil：Low，Koc (epoxy): 500 – 2000.
Other Impair Effects：Not applicable

SECTION XIII Disposal Considerations

Disposal：DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY OF
WATER. All disposal practices must be in compliance with all Federal, State/Provincial and local
laws and regulations. Regulations may vary in different locations. Waste characterizations and
compliance with applicable laws are the responsibility solely of the waste generator.

SECTION XIV Transport Information

Road and Rail Transport：Not subject to DOT.
Sea Transport (IMDG)：Not subject to IMDG code.
Air Transport (IATA)：Not subject to IATA regulations.
Marine Pollutant (Yes/No)：No
Special Requirements and Additional Information: Not Applicable

SECTION XV Regulatory Information

Applicable Laws：

 Rules on Workers Health and Safety Facilities.

 Rules on Hazard Communication of dangerous Materials and Toxic Materials.
 Rules on the Prevention of Poisoning from Organic Solvents.
 Rules for Transport by Road.
 Standards for the Storage, cleanup, Handling and disposal of Industrial Waste.
 Workers operation ambient air pernicious gases to allow concentration standard
 Public Hazardous Materials and Flammable Pressurized Gases Establishment Standards and
Safety Control Regulations.

SECTION XVI Other Information

Literature References:
MICROMEDEX、IUCLID Chemical Data Sheets Information System、ESIS、HSDB
Internal Technical Data, Recommendations on the Transport of Dangerous Goods – Model
Regulations (2005)、 Globally Harmonized System of Classification and Labelling of Chemicals
(2005)、Thomson MICROMEDEX, IUCLID Chemical Data Sheets Information System, ESIS,
HSDB, and others.
Date of Issue: 15-04-2023
Notice：The information herein is presented in good faith and believed to be accurate as of the
effective date shown above. However, no warranty, express or implied is given.
Regulatory requirements are subject to change and may differ from one location to
another; it is the users’ responsibility to ensure that its activities comply with international
and local laws.