RENOLIN B HVI RANGE
EP lubricating and hydraulic oils with high viscosity index
Description Advantages/Benefits
Proper function and operating safety of hydraulic • Low foaming tendency
systems is largely influenced by the quality of the • Good air release properties
hydraulic medium. In addition to the task of • High ageing resistance
transferring forces, the operating fluid must seal, cool • Good corrosion protection
and lubricate. Since hydraulic oils are exposed to • Very good viscosity / temperature behaviour
high stress due to the operating conditions, they have • Very good wear protection
to fulfil a large number of requirements.
• High viscosity index
RENOLIN B HVI RANGE are formulated using highly • Wide service temperature range
ageing resistant mineral oils and additives. • Good shear stability
RENOLIN B HVI RANGE are zinc containing HVLP
hydraulic and general lubricating oils according to
DIN 51 524-3. Mineral oil based, demulsifying. Specifications
The products meet or exceed the requirements
according to:
Application
• DIN 51 524-3, HVLP ● Vickers
RENOLIN B HVI RANGE are high quality products • ISO 6743-4, HV ● US Steel
used as hydraulic oil and as lubricating oil for various • Denison HF 0 ● Cincinnati Milacron
applications such as bearings and gear boxes, where • Bosch Rexroth
high viscosity index and good load carrying capacity
are required. Especially recommended for
applications where a low start-up viscosity at low
temperatures and a higher viscosity at higher
temperatures is required. Particularly suited to all
applications in mobile and industrial hydraulic systems
that require the use of an HVLP oil according to DIN
51 524-3 with a wide service temperature range.
June 2008 GDUK Page 1 of 2
Health, Safety and Environment - information is provided for While the information and figures given here are typical of current
products in the relevant Safety Data Sheet. This provides guidance on production and conform to specification, minor variations may occur. No
potential hazards, precautions and first-aid measures, together with warranty expressed or implied is given concerning the accuracy of the
environmental effects and disposal of used products. information or the suitability of the products
FUCHS LUBRICANTS (UK) PLC Tel: +44-1782 -20 37 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU Email:
[email protected] CHARACTERISTICS: RENOLIN B HVI RANGE
RENOLIN B.... 15 HVI 32 HVI 46 HVI 68 HVI
Characteristics Unit Test Method
ISO VG 15 32 46 68 DIN 51 519
Kinematic viscosity DIN EN ISO 3104
at -20ºC mm2/s 400 1858 3468 5541
at 0ºC mm2/s 80 233 401 563
at 40ºC mm2/s 15 32 46 68
at 100ºC mm2/s 3.8 6.3 8.1 11.0
Viscosity index - 150 150 150 154 DIN ISO 2909
3
Density at 15ºC kg/m 859 870 875 882 DIN 51 757
Colour index ASTM 0.5 0.5 0.5 1.0 DIN ISO 2049
Flash point in open cup DIN ISO 2592
according to Cleveland ºC 180 178 186 210
Pour point ºC -45 -42 -42 -42 DIN ISO 3016
Neutralisation number mg KOH/g 0.5 0.5 0.5 0.5 DIN 51 558-2
Mechanical testing in the FZG failure load DIN 51 354-2
gear test rig, FZG A/8,3/90 stage 11 11 11 11
VKA shear stability, four ball DIN 51 350-6
test: relative shear loss
(viscosity reduction , V40
and V100) after 20h % < 20 < 20 < 20 < 20
WARNING: Never mix zinc-free hydraulic fluids with those containing zinc-based additives.
June 2008 GDUK Page 2 of 2
Health, Safety and Environment - information is provided for While the information and figures given here are typical of current
products in the relevant Safety Data Sheet. This provides guidance on production and conform to specification, minor variations may occur. No
potential hazards, precautions and first-aid measures, together with warranty expressed or implied is given concerning the accuracy of the
environmental effects and disposal of used products. information or the suitability of the products
FUCHS LUBRICANTS (UK) PLC Tel: +44-1782 -20 37 00
New Century Street, Hanley Fax: +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU Email:
[email protected]
