Technical Data Sheet
Disflamoll® Plastic Additives / Flame Retardants
TOF
Description
Disflamoll® TOF is a phosphate ester plasticizer which imparts outstanding low-temperature flexibility and good
resistance to weathering. It is a strong, moderately polar solvent.
Chemical composition
Tris (2-ethylhexyl) phosphate (TOP)
CAS Registry Number
78-42-2
Typical properties
Appearance: clear, almost colourless liquid
Phosphorus content: 7.1 % (calculated)
TOP content: ≥ 98.5 %
D2EHPA content: ≤ 0.05 %
Acid value: ≤ 0.05 mg KOH/g
Water content: ≤ 0.2 %
Hazen colour value: ≤ 40
Refractive index nD 20°C: 1.443 – 1.445
3
Density at 20°C: 0.920 – 0.926 g/cm
Viscosity at 20°C: 13 – 15 mPas
Storage
If stored correctly, the product has a minimum shelf life of 2 years.
Packaging
Road tankers / containers, 950 kg non-returnable containers, 195 kg drums.
Applications
Disflamoll® TOF is a phosphate plasticizer offering excellent low temperatures properties as well as good
resistance to weathering. It is suitable for use in many types of polymers including flexible PVC, PUR, NBR, SBR
and EPDM. It is a strong, moderately polar solvent.
Disflamoll® TOF is also used as a solvent in the production of hydrogen peroxide, as a carrier for pigments in
the manufacture of pigment pastes for plastics and as an additive for mineral oils.
Product safety
Relevant safety data and references as well as possibly necessary warning labels are to be found in safety data
sheet.
® = registered trade mark
Page Version: Revised: Printed on:
1 of 2 1/20. Nov 2015 02-22-2016 02-22-2016
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and
this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the
information currently provided - especially that contained in our safety data and technical information sheets - and to test our products as to
their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by
you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold and
our advisory service is given in accordance with the current version of our General Conditions of Sale and Delivery.
LANXESS Deutschland GmbH
Business Unit Rhein Chemie Additives
BL Plastic Additives Business
Kennedyplatz 1
D-50569 Köln, Deutschland
Telefon: +49(0)221-8885-0
www.rheinchemie-additives.de
Page Version: Revised: Printed on:
2 of 2 1/20. Nov 2015 02-22-2016 02-22-2016
