International Standards in process

TC 31 Tyres, rims and valves

ISO/CD 4223-1 Definitions of some terms used in the tyre industry
An International Standard is the result of an agreement between — Part 1: Pneumatic tyres
the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for ISO/CD 10454 Truck and bus tyres — Verifying tyre capabilities —
study within an ISO technical committee. When consensus has been Laboratory test methods
reached within the technical committee, the document is sent to the Cen- TC 33 Refractories
tral Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. ISO/CD 2478 Dense shaped refractory products — Determi-
A confirmation vote is subsequently carried out on a final draft Internation- nation of permanent change in dimensions on
al Standard (FDIS), the approval criteria remaining the same. heating
ISO/CD 5017 Dense shaped refractory products — Determina-
tion of bulk density, apparent porosity and true
porosity
TC 34 Food products
ISO/CD 23983 Characteristics of fresh and dry baker’s yeast
ISO/CD 605 Pulses — Determination of the impurities (includ-
ing insects) — Test methods on a laboratory
CD registered sample
ISO/CD 20810 Definition of whole grain and technical criteria for
labelling
Period from 01 April to 01 May 2024 ISO/CD 26323 Milk products — Determination of the acidifica-
tion activity of dairy cultures by continuous pH
These documents are currently under consideration in the technical
measurement (CpH)
committee.
ISO/CD TS Heat-processed milk and dried milk products —
They have been registered at the Central Secretariat.
27265 Enumeration of thermoresistant spores of thermo-
philic bacteria
PC 335 Guidelines for organizations to increase ISO 16140- Microbiology of the food chain — Method valida-
consumer understanding of online terms and 3:2021/CD tion — Part 3: Protocol for the verification of refer-
conditions Amd 1 ence methods and validated alternative methods
in a single laboratory — Amendment 1: Verifica-
ISO/CD 21800 Guidelines for organizations to increase consumer tion of validated identification methods
understanding of online terms and conditions
ISO 16140- Microbiology of the food chain — Method valida-
TC 2 Fasteners 4:2020/CD tion — Part 4: Protocol for method validation in
ISO/CD 7380-3 Fasteners — Button head screws with reduced Amd 2 a single laboratory — Amendment 2: Protocol
loadability — Part 3: Hexalobular socket button for single-laboratory validation of identification
head screws methods of microorganisms
ISO/CD 7380-4 Fasteners — Button head screws with reduced ISO/CD 21379 Animal and vegetable fats and oils — Determina-
loadability — Part 4: Hexalobular socket button tion of dioxins and dioxin-like polychlorinated
head screws with collar biphenyls (PCBs)- HRGC/HRMS method

TC 17 Steel TC 38 Textiles
ISO/CD 16650 Bead wire ISO/CD 9348 Textiles —Determination of the anti-contamina-
tion propensity of fabrics to particulate matter —
TC 22 Road vehicles Digital measurement method
ISO/CD PAS Road vehicles — Vehicle to grid communication ISO 20932- Textiles — Determination of the elasticity of fabrics
15118-23 interface — Part 23: 2nd generation network layer 3:2018/CD — Part 3: Narrow fabrics — Amendment 1
and application layer requirements conformance Amd 1
test plan - DC charging
TC 45 Rubber and rubber products
ISO/CD 3888-2 Passenger cars — Test track for a severe lane-
change manoeuvre — Part 2: Obstacle avoidance ISO/DIS 1436 Rubber hoses and hose assemblies — Wire-braid-
reinforced hydraulic types for oil-based or water-
ISO/CD TS Road Vehicles —HMI specification for Over The Air based fluids — Specification
20003 (OTA) software updates
ISO/CD 18752 Rubber hoses and hose assemblies — Wire- or
TC 27 Coal and coke textile-reinforced single-pressure types for hydrau-
ISO/CD 23499 Coal — Determination of bulk density for the use lic applications — Specification
in charging of coke ovens ISO/CD 28017 Rubber hoses and hose assemblies, wire or
ISO/CD 1014-1 Coke — Part 1: Determination of apparent relative textile reinforced, for dredging applications
density — Specification

TC 28 Petroleum and related products, fuels and ISO/CD 6123-3 Rubber- or plastics-covered rollers — Specifica-
lubricants from natural or synthetic sources tions — Part 3: Dimensional tolerances

ISO/CD 2719 Determination of flash point — Pensky-Martens ISO/CD 7617-2 Plastics-coated fabrics for upholstery — Part 2:
closed cup method Specification for PVC-coated woven fabrics
ISO/CD 7617-3 Plastics-coated fabrics for upholstery — Part 3:
TC 29 Small tools
Specification for polyurethane-coated woven
ISO/CD 8406 Tools for pressing and moulding — Round locating fabrics
elements and spacers

ISO Update, Supplement to ISO Focus -- May 2024 1

 TC 61 Plastics ISO/CD TS Assessment of conformity of plastics piping
23818-1 systems for the rehabilitation of existing pipelines
ISO/CD 4907-4 Plastics — Ion exchange resin — Part 4: Determi-
— Part 1: Polyethylene (PE) material
nation of particle size by laser diffraction method
ISO/CD TS Assessment of conformity of plastics piping sys-
TC 69 Applications of statistical methods 23818-3 tems for the rehabilitation of existing pipelines —
ISO/CD 22514-7 Statistical methods in process management — Part 3: Unplasticised poly(vinyl chloride) (PVC-U)
Capability and performance — Part 7: Capability of material
measurement processes
TC 156 Corrosion of metals and alloys
TC 76 Transfusion, infusion and injection, and ISO/CD 16674.2 Corrosion control engineering life cycle of power
blood processing equipment for medical and transmission and transformation system-General
pharmaceutical use requirement
ISO/CD TR Risk management of particulate contamination for TC 159 Ergonomics
8417.2 devices with intravascular access
ISO/CD Ergonomics of human-system interaction — Part
TC 85 Nuclear energy, nuclear technologies, and 9241-130 130: User assistance within interactive systems
radiological protection
TC 164 Mechanical testing of metals
IEC/CD 63465.2 Calibration and quality control in the use of radio-
ISO/CD 14577-6 Metallic materials — Instrumented indentation
nuclide calibrators
test for hardness and materials parameters —
TC 86 Refrigeration and air-conditioning Part 6: Instrumented indentation test at elevated
temperature
ISO/CD 5222-1 Heat recovery ventilators and energy recovery
ventilators — Testing and calculating methods for TC 174 Jewellery and precious metals
seasonal performance factor — Part 1: Sensible
ISO/CD 21261-3 Jewellery and precious metals — Responsible pre-
heating recovery seasonal performance factors of
cious metals — Part 3: Requirements for recycled
heat recovery ventilators (HRV)
gold
ISO/CD 22043 Ice-cream freezers — Classification, requirements
and test conditions TC 176 Quality management and quality assurance
ISO/CD 22044 Commercial beverage coolers — Classification, ISO/CD 9001 Quality management systems — Requirements
requirements and test conditions with guidance for use

TC 93 Starch (including derivatives and TC 181 Safety of toys

by-products) ISO/CD 8124-5 Safety of toys — Part 5: Determination of total
concentration of certain elements in toys
ISO/DIS 21921 Oxidized Starch — Specifications and test methods
TC 184 Automation systems and integration
TC 94 Personal safety -- Personal protective
equipment ISO/CD Industrial automation systems and integration
10303-62 — Product data representation and exchange —
ISO/CD 13994 Clothing for protection against liquid chemicals Part 62: Integrated generic resource: Equivalence
— Determination of the resistance of protective validation of product data
clothing materials to penetration by liquids under
pressure ISO/CD Industrial automation systems and integration —
10303-238 Product data representation and exchange — Part
ISO/CD 27065 Protective clothing — Performance requirements 238: Application protocol: Model based integrated
for protective clothing worn by operators applying manufacturing
pesticides and for re-entry workers
ISO/CD 17649.2 Model-Based Standards Authoring MBSA
TC 96 Cranes
ISO/CD 25500-1 Supply chain interoperability and integration —
ISO/CD 11660-1 Cranes — Access, guards and restraints — Part 1: Part 1: Overview
General
ISO/CD 25500-2 Supply chain interoperability and integration —
TC 117 Fans Part 2: Vocabulary
ISO/CD 13350 Fans — Performance testing of jet fans ISO/CD 25500-3 Supply chain interoperability and integration —
ISO 14694:2003/ Industrial fans — Specifications for balance quality Part 3: Verification of Authoritative Legal Entity
CD Amd 2 and vibration levels — Amendment 2 Identifiers (ALEI)

TC 130 Graphic technology ISO/CD Supply chain interoperability and integration —

25500-100 Part 100: Verification of Supply Chain Data
ISO/CD 15339-2 Graphic technology — Printing from digital data
across multiple technologies — Part 2: Character- ISO/CD Supply chain interoperability and integration —
ized reference printing conditions, CRPC1-CRPC7 25500-110 Part 110: Verification of certificates in the supply
chain
ISO/CD 19307 Graphic Technology — Measurement and one-
parameter representation of translucency ISO/CD Supply chain interoperability and integration —
25500-120 Part 120: Verification of localization data
TC 135 Non-destructive testing
ISO/CD Supply chain interoperability and integration —
ISO/CD 12716 Non-destructive testing — Acoustic emission 25500-240 Part 240: Strategic sourcing concepts, principles,
inspection — Vocabulary and data requirements
TC 138 Plastics pipes, fittings and valves for the TC 198 Sterilization of health care products
transport of fluids ISO/CD 11138-6 Sterilization of health care products — Biological
ISO/CD 13272 Plastics piping systems for non-pressure under- indicators — Part 6: Biological indicators for hydro-
ground drainage and sewerage — Unplasticized gen peroxide sterilization processes
poly(vinyl chloride) (PVC-U), polypropylene (PP),
ISO/CD 11737-1 Sterilization of health care products — Micro-
polypropylene with mineral modifiers (PP-MD) and
biological methods — Part 1: Determination of a
polyethylene (PE) — Specifications for manholes
population of microorganisms on products
and inspection chambers in traffic areas and
underground installations

2 ISO Update, Supplement to ISO Focus -- May 2024

 ISO/CD 19253 Sterilization of health care products — Application ISO/IEC CD Information technology — Security techniques —
of ISO/TS 22421 to the requirements for steriliz- 27017.2 Code of practice for information security controls
ers used for the terminal sterilization of health based on ISO/IEC 27002 for cloud services
care products containing aqueous liquid in sealed
ISO/IEC 19566- Information technologies — JPEG systems — Part
containers
8:2023/CD 8: JPEG Snack — Amendment 1: Revision of JPEG
TC 201 Surface chemical analysis Amd 1 Snack content boxes
ISO/CD 4508 Surface chemical analysis—Scanning probe ISO/IEC DIS Information technologies — JPEG systems — Part
microscopy—Guidelines for the method and pro- 19566-10/CD 10: Reference Software — Amendment 1: Addi-
cedure for determining the effect of temperature Amd 1 tional reference software implementations
on AFM nano-scale dimension measurements ISO/IEC CD Information technology — Automatic identifica-
ISO/CD 16524 Surface chemical analysis — Atomic force mi- 29167-13 tion and data capture techniques — Part 13:
croscopy — Guideline for quantitative nanoscale Crypto suite Grain-128A security services for air
potential measurement by Kelvin probe force interface communications
microscopy ISO/IEC CD TR Information technology — Concepts and usage of
TC 204 Intelligent transport systems 19583-21 metadata — Part 21: 11179-3 Data model in SQL
ISO/CD 12768-1 Intelligent transport systems — Automated Valet ISO/IEC CD Information technology — Document Schema
Driving Systems (AVDS) — Part 1: Part 1: Require- 19757-3 Definition Languages (DSDL) — Part 3: Rule-based
ments, System Framework, Communication validation using Schematron
Interfaces and Test Procedures ISO/IEC CD 4933 Information Technology — User interfaces — Uni-
ISO/CD PAS Intelligent transport systems – Acceleration control fying input actions across devices
19486 for pedal error (ACPE) – Performance, requirements ISO/IEC CD TR Information technology — Brain-computer inter-
and test procedures 27599 faces — Use cases
ISO/CD TR Intelligent transport systems — Information
19560 interface framework between automated driving
system and user
TC 210 Quality management and corresponding
general aspects for products with a health
purpose including medical devices
ISO/CD TS 5137 Medical device maintenance management for
healthcare delivery organizations
DIS circulated
TC 211 Geographic information/Geomatics
ISO/CD TS Geographic information — Calibration and valida- Period from 01 April to 01 May 2024
19124-2 tion of remote sensing data and derived products
These documents have obtained substantial support within the appropri-
— Part 2: SAR
ate ISO technical committee.
TC 219 Floor coverings They have been submitted to the ISO member bodies for voting by the
ISO/CD 24343-2 Resilient and laminate floor coverings — Deter- date shown.
mination of indentation and residual indentation
* Available in English only
— Part 2: Short-term indentation and residual
indentation of resilient floor covering
TC 232 Education and learning services
Vote
ISO/CD 29997 Criterias for quality internships terminates
TC 249 Traditional Chinese medicine
ISO/CD 21590 Traditional Chinese Medicine —Crocus sativus TC 1 Screw threads
stigma ISO/DIS 965-5 ISO general purpose metric screw
TC 268 Sustainable cities and communities threads — Tolerances — Part 5:
Limits of sizes for internal threads 2024-07-08
ISO/CD 37189 Smart community infrastructure — Guidance for to mate with hot dip galvanized
data-driven visualization in newly developing external threads with maximum
areas size of tolerance position h before
TC 276 Biotechnology galvanizing
(Revision of ISO 965-5:1998, ISO
ISO/CD TS Biotechnology — Predictive computational mod- 965-5:1998/Amd 1:2021)
9491-2 els in personalized medicine research — Part 2:
Guidelines for implementing computational mod- TC 6 Paper, board and pulps
els in clinical integrated decision support systems ISO/DIS 3035 Corrugated fibreboard — Determi-
TC 298 Rare earth nation of flat crush resistance
2024-06-28
ISO/CD 24548 Rare earth — Determination of moisture content
in rare earth products — Gravimetric method (Revision of ISO 3035:2011)
TC 307 Blockchain and distributed ledger ISO/DIS 3036 Board — Determination of punc-
technologies ture resistance using a pendulum
ISO/CD TS Blockchain and Distributed Ledger Technology — device 2024-07-08
23516 Interoperability Framework
(Revision of ISO 3036:1975)
JTC 1 Information technology
TC 8 Ships and marine technology
ISO/IEC/IEEE CD Software and systems engineering — Incident
23612 management ISO/DIS 16123 Ships and marine technology —
Marine cranes — Slewing bearings
2024-07-18

ISO Update, Supplement to ISO Focus -- May 2024 3

 ISO/DIS 16173 Ships and marine technology — ISO/DIS 13296 Diesel engines — High-pressure
Jacking system appliances on fuel injection pipe assemblies
self-elevating unit — Rack pinion 2024-07-18 — General requirements and 2024-07-12
leg fixation system dimensions
(Revision of ISO 13296:2016)
TC 17 Steel
ISO/DIS 3575 Continuous hot-dip zinc-coated TC 24 Particle characterization includ-
and zinc-iron alloy-coated carbon ing sieving
steel sheet of commercial and 2024-07-18 ISO/DIS 13099-2 Colloidal systems — Methods for
drawing qualities zeta-potential determination —
(Revision of ISO 3575:2016) Part 2: Optical methods 2024-07-03
ISO/DIS 4997 Cold-reduced carbon steel sheet of
structural quality (Revision of ISO 13099-2:2012)
2024-07-17 TC 27 Coal and coke
(Revision of ISO 4997:2015) ISO/DIS 1017 Brown coals and lignites — De-
termination of acetone-soluble
ISO/DIS 5002 Hot-rolled and cold-reduced elec- material ("resinous substance") in 2024-07-24
trolytic zinc-coated carbon steel the benzene-soluble extract
sheet of commercial and drawing 2024-07-17 (Revision of ISO 1017:2006)
qualities
(Revision of ISO 5002:2013) ISO/DIS 29541 Coal — Determination of total
carbon, hydrogen and nitrogen
TC 20 Aircraft and space vehicles content — Instrumental method 2024-07-10
ISO/DIS 8168 Aerospace — Bolts, with MJ
threads, made of heat and cor- (Revision of ISO 29541:2010)
rosion resisting steel, strength 2024-07-16 TC 28 Petroleum and related prod-
class 1 100 MPa — Procurement ucts, fuels and lubricants from
specification
natural or synthetic sources
(Revision of ISO 8168:2016)
ISO/DIS 20120 Lubricants — Determination
ISO/DIS 7718-1 Aircraft — Passenger doors inter-
of the Coefficient of Friction of
face requirements for connection
Synchronizer Lubricated by Manual 2024-07-18
of passenger boarding bridge or 2024-07-03
Transmission Fluids (MTF) — High-
passenger transfer vehicle — Part
Frequency, Linear-Oscillation (SRV)
1: Main deck doors
Test Machine
(Revision of ISO 7718-1:2016)
TC 34 Food products
ISO/DIS 7718-2 Aircraft — Passenger doors inter-
face requirements for connection ISO/DIS 24557.2 Pulses — Determination of mois-
of passenger boarding bridge or 2024-07-03 ture content — Air-oven method
passenger transfer vehicle — Part 2024-06-10
2: Upper deck doors
(Revision of ISO 7718-2:2016) (Revision of ISO 24557:2009)
ISO/DIS 15104 Space systems — Environmental ISO/DIS 1003 Spices and condiments— Dried
testing for spacecraft thermal Ginger (<i>Zingiber officinale </
control materials 2024-07-02 i>Roscoe) — Whole/ Pieces &amp; 2024-07-02
Ground — Specification
(Revision of ISO 1003:2008)
ISO/DIS 20188 Space systems — Product assur-
ance requirements for commercial ISO/DIS Molecular biomarkers — Detection
satellites 2024-07-19 5354-1.2 of DNA in cotton used for textile
production — Part 1: Extraction 2024-05-27
(Revision of ISO 20188:2018) of DNA from cotton seed and raw
materials derived therefrom
ISO/DIS 8074 Aerospace — Surface treatment of
(Revision of IWA 32:2019)
austenitic stainless steel parts
2024-07-17 ISO/DIS 22002-1 Prerequisite programmes on
food safety — Part 1: Food
(Revision of ISO 8074:1985) manufacturing 2024-06-27
ISO/DIS 8075 Aerospace — Surface treatment of
(Revision of ISO/TS 22002-1:2009)
hardenable stainless steel parts
2024-07-19 ISO/DIS 22002-2 Prerequisite programmes on food
safety — Part 2: Catering
(Revision of ISO 8075:1985) 2024-06-27
ISO/DIS 8078 Aerospace process — Anodic treat-
(Revision of ISO/TS 22002-2:2013)
ment of aluminium alloys — Sulfu-
ric acid process, undyed coating 2024-07-18 ISO/DIS 22002-4 Prerequisite programmes on food
safety — Part 4: Food packaging
(Revision of ISO 8078:1984) manufacturing 2024-06-27
ISO/DIS 8079 Aerospace process — Anodic
(Revision of ISO/TS 22002-4:2013)
treatment of aluminium alloys —
Sulfuric acid process, dyed coating 2024-07-18 ISO/DIS 22002-5 Prerequisite programmes on food
safety — Part 5: Transport and
(Revision of ISO 8079:1984) storage 2024-06-27
TC 22 Road vehicles (Revision of ISO/TS 22002-5:2019)

4 ISO Update, Supplement to ISO Focus -- May 2024

 ISO/DIS 22002-6 Prerequisite programmes on food ISO/DIS 10286 Gas cylinders — Vocabulary
safety — Part 6: Feed and animal
food production 2024-06-27 2024-07-04

(Revision of ISO/TS 22002-6:2016) (Revision of ISO 10286:2021)

ISO/DIS 22002-7 Prerequisite programmes on food TC 61 Plastics
safety — Part 7: Retail
ISO/DIS 11357-5 Plastics — Differential scanning
2024-06-27
calorimetry (DSC) — Part 5: Deter-
mination of characteristic reaction- 2024-07-02
ISO/DIS Prerequisite programmes on food curve temperatures and times,
22002-100 safety — Part 100: PRP require- enthalpy of reaction and degree of
ments common for food, feed, and 2024-06-27 conversion
packaging supply chain (Revision of ISO 11357-5:2013)
TC 35 Paints and varnishes TC 67 Oil and gas industries including
ISO/DIS 11908 Binders for paints and varnishes — lower carbon energy
Amino resins — General methods ISO/DIS 24204 Oil and gas industries including
of test 2024-07-23 lower carbon energy — Bulk mate-
rial for offshore projects — Design 2024-07-17
(Revision of ISO 11908:1996) for architectural supports
TC 41 Pulleys and belts (including ISO/DIS 15589-1 Oil and gas industries including
veebelts) lower carbon energy — Cathodic
protection of pipeline systems — 2024-06-28
ISO/DIS 12046 Synchronous belt drives — Auto-
Part 1: On-land pipelines
motive belts — Determination of
(Revision of ISO 15589-1:2015)
physical properties 2024-06-28
ISO/DIS 13503-2 Oil and gas industries including
(Revision of ISO 12046:2012) lower carbon energy — Comple-
tion fluids and materials — Part 2024-07-01
TC 42 Photography 2: Measurement of properties
ISO/DIS 18916 Imaging materials – Photographic of proppants used in hydraulic
activity test for enclosure materials fracturing and gravel-packing
– Processed silver‐gelatin and dye‐ 2024-07-23 operations
gelatin prints (Revision of ISO 13503-2:2006, ISO
(Revision of ISO 18916:2007) 13503-2:2006/Amd 1:2009)
TC 43 Acoustics TC 71 Concrete, reinforced concrete
ISO/DIS 13472-2 Acoustics — Measurement of and pre-stressed concrete
sound absorption properties of ISO/DIS 19338 Performance requirements for
road surfaces in situ — Part 2: Spot 2024-07-12 standards on concrete structures
method for reflective surfaces 2024-06-27
(Revision of ISO 13472-2:2010)
ISO/DIS 13473-5 Characterization of pavement (Revision of ISO 19338:2014)
texture by use of surface pro- TC 76 Transfusion, infusion and
files — Part 5: Determination of 2024-07-04 injection, and blood process-
megatexture
ing equipment for medical and
(Revision of ISO 13473-5:2009)
pharmaceutical use
TC 44 Welding and allied processes ISO/DIS 8536-6 Infusion equipment for medical use
ISO/DIS 14343 Welding consumables — Wire — Part 6: Freeze drying closures for
electrodes, strip electrodes, infusion bottles 2024-07-11
wires and rods for arc welding of 2024-07-17
stainless and heat resisting steels (Revision of ISO 8536-6:2016)
— Classification
ISO/DIS 8871-5 Elastomeric parts for parenterals
(Revision of ISO 14343:2017)
and for devices for pharmaceutical
ISO/DIS 21952 Welding consumables — Wire elec- use — Part 5: Functional require- 2024-07-15
trodes, wires, rods and deposits for ments and testing
gas shielded arc welding of creep- 2024-07-17 (Revision of ISO 8871-5:2016)
resisting steels — Classification
(Revision of ISO 21952:2012)
TC 85 Nuclear energy, nuclear
technologies, and radiological
ISO/DIS 26304 Welding consumables — Solid protection
wire electrodes, tubular cored
electrodes and electrode-flux 2024-07-19 ISO/DIS 18510-1 Measurement of radioactivity in
combinations for submerged arc the environment — Bioindica-
welding of high strength steels tors — Part 1: General guide for 2024-07-22
— Classification the sampling, conditioning and
(Revision of ISO 26304:2017) pre-treatment

TC 46 Information and TC 94 Personal safety -- Personal

documentation protective equipment
ISO/DIS 9706 Information and documentation ISO/DIS 3873 Industrial protective helmets
— Paper for documents — Require-
ments for permanence 2024-06-27 2024-07-16

(Revision of ISO 9706:1994) (Revision of ISO 3873:1977)

TC 58 Gas cylinders

ISO Update, Supplement to ISO Focus -- May 2024 5

 ISO/DIS Respiratory protective devices — ISO/DIS 15708-2 Non-destructive testing — Ra-
16900-11 Methods of test and test equip- diation methods for computed
ment — Part 11: Determination of 2024-07-16 tomography — Part 2: Principles, 2024-07-01
field of vision equipment and samples
(Revision of ISO 16900-11:2013) (Revision of ISO 15708-2:2017)
TC 96 Cranes ISO/DIS 15708-3 Non-destructive testing — Ra-
diation methods for computed
ISO/DIS 4301-5 Cranes — Classification — Part 5:
tomography — Part 3: Operation 2024-07-19
Bridge and gantry cranes
and interpretation
2024-07-05
(Revision of ISO 15708-3:2017)
(Revision of ISO 4301-5:1991) ISO/DIS 15708-4 Non-destructive testing — Radia-
tion methods for computed tomog-
ISO/DIS 10972-1 Cranes — Requirements for mecha-
raphy — Part 4: Qualification 2024-07-01
nisms — Part 1: General
2024-06-28
(Revision of ISO 15708-4:2017)
(Revision of ISO 10972-1:1998) TC 138 Plastics pipes, fittings and
TC 106 Dentistry valves for the transport of fluids
ISO/DIS 16408 Dentistry — Oral care products — ISO/DIS 16486-2 Plastics piping systems for the
Oral rinses supply of gaseous fuels — Unplas-
2024-06-24 ticized polyamide (PA-U) piping 2024-07-09
systems with fusion jointing and
mechanical jointing — Part 2: Pipes
(Revision of ISO 16408:2015)
(Revision of ISO 16486-2:2020)
ISO/DIS 20127 Dentistry — Physical properties of
powered toothbrushes ISO/DIS 16486-3 Plastics piping systems for the
2024-07-12 supply of gaseous fuels — Unplas-
ticized polyamide (PA-U) piping 2024-07-12
systems with fusion jointing and
(Revision of ISO 20127:2020)
mechanical jointing — Part 3:
TC 110 Industrial trucks Fittings
ISO/DIS Industrial trucks — Verification of (Revision of ISO 16486-3:2020)
22915-13.2 stability — Part 13: Rough-terrain TC 146 Air quality
trucks with mast 2024-06-05
ISO/DIS Interior air of road vehicles — Part
12219-12 12: Artificial leather made from PVC
(Revision of ISO 22915-13:2012, ISO
or Polyurethane— Specification 2024-07-02
22915-13:2012/Cor 1:2013)
and methods for the determina-
ISO/DIS Industrial trucks — Verification of tion of fogging characteristics of
22915-25 stability — Part 25: Rough-terrain trim materials in the interior of
variable-reach trucks operating in 2024-07-17 automobiles
the special condition of handling
freely suspended loads TC 150 Implants for surgery
ISO/DIS 5092 Additive manufacturing for medi-
TC 117 Fans
cal — General principles — Addi-
ISO 5801:2017/ Fans — Performance testing using tive manufacturing of non-active 2024-07-05
DAmd 1 standardized airways — Amend- implants
ment 1 2024-06-24
TC 159 Ergonomics
ISO/DIS Ergonomics of human-system in-
TC 123 Plain bearings
9241-161 teraction — Part 161: Guidance on
ISO/DIS 8838.2 Plain bearings — Water-lubricated visual user-interface elements 2024-07-01
plain bearing materials
2024-06-06 (Revision of ISO 9241-161:2016)
TC 183 Copper, lead, zinc and nickel
TC 127 Earth-moving machinery ores and concentrates
ISO/DIS 19014-5 Earth-moving machinery — Func- ISO/DIS 12744 Copper, lead, zinc and nickel
tional safety — Part 5: Tables of concentrates — Experimental
performance levels 2024-07-15 methods for checking the precision 2024-07-16
of sampling
(Revision of ISO/TS 19014-5:2021) (Revision of ISO 12744:2006)
TC 133 Clothing sizing systems - size TC 188 Small craft
designation, size measurement
ISO/DIS 23625 Small craft — Lithium-ion batteries
methods and digital fittings
ISO/DIS 8559-2 Size designation of clothes — Part 2024-07-01
2: Primary and secondary dimen-
sion indicators 2024-07-03 (Revision of ISO/TS 23625:2021)

(Revision of ISO 8559-2:2017)

TC 197 Hydrogen technologies
ISO/DIS 22734-1 Hydrogen generators using water
TC 135 Non-destructive testing electrolysis — Part 1: General
ISO/DIS 15708-1 Non-destructive testing — Radia- requirements, test protocols and 2024-07-24
tion methods for computed tomog- safety requirements
raphy — Part 1: Terminology 2024-06-28 (Revision of ISO 22734:2019)

(Revision of ISO 15708-1:2017)

TC 199 Safety of machinery

6 ISO Update, Supplement to ISO Focus -- May 2024

 ISO/DIS 12895 Safety of machinery — Identifica- ISO/DIS 13391-3 Wood and wood-based products
tion of whole body access and — Greenhouse gas dynamics —
prevention of associated risk(s) 2024-07-16 Part 3: Displacement of greenhouse 2024-07-12
gas emissions
TC 211 Geographic information/ TC 289 Brand evaluation
Geomatics ISO/DIS 11778 Brand evaluation — Tourism City
ISO/DIS 19152-2 Geographic information — Land
Administration Domain Model 2024-07-10
(LADM) — Part 2: Land registration 2024-07-15
TC 291 Domestic gas cooking
(Revision of ISO 19152:2012)
appliances
TC 213 Dimensional and geometrical ISO/DIS 21364-1 Domestic gas cooking appli-
product specifications and ances — Safety — Part 1: General
verification requirements 2024-07-08
ISO/DIS 14405-1 Geometrical product specifications
(GPS) — Dimensional tolerancing (Revision of ISO/TS 21364-1:2021)
— Part 1: Linear sizes 2024-07-16 ISO/DIS Domestic gas cooking appliances
21364-21 — Safety — Part 21: Particular
(Revision of ISO 14405-1:2016) requirements for gas hobs, gas 2024-07-08
TC 219 Floor coverings grills and gas griddles
(Revision of ISO/TS 21364-21:2021)
ISO/DIS 14486 Laminate floor coverings
— Specification ISO/DIS Domestic gas cooking appliances
2024-07-04 21364-22 — Safety — Part 22: Particular
requirements for ovens and com- 2024-07-08
(Revision of ISO 14486:2012) partment grills
(Revision of ISO/TS 21364-22:2021)
TC 221 Geosynthetics
TC 321 Transaction assurance in
ISO/DIS 13433 Geosynthetics — Determination E-commerce
of dynamic perforation (cone drop
test) 2024-07-22 ISO/DIS 32112 Transaction assurance in e-com-
merce — Relevant factors of evalu-
(Revision of ISO 13433:2006) ation and selection of indicators 2024-07-08

TC 238 Solid biofuels

ISO/DIS 32122 Transaction assurance in e-com-
ISO/DIS 17828 Solid biofuels — Determination of merce — Guidelines for offering
bulk density online dispute resolution services 2024-07-23
2024-07-09

(Revision of ISO 17828:2015) JTC 1 Information technology

TC 249 Traditional Chinese medicine ISO/IEC DIS Information technology — Open
9594-12.2 systems interconnection — Part 12:
ISO/DIS 5106 Traditional Chinese Medicine—— The Directory: Key management 2024-06-17
Polygala tenuifolia and Polygala and public-key infrastructure estab-
sibirica root 2024-07-05 lishment and maintenance
ISO/IEC DIS Software and systems engineer-
ISO/DIS 5471 Traditional Chinese medicine — 20582 ing — Capabilities of build and
Carthamus tinctorius flower deployment tools 2024-06-28
2024-07-02
ISO/IEC DIS Systems and software engineering
ISO/DIS 19836 Traditional Chinese medicine — 29110-5-4 — Lifecycle profiles for Very Small
Platycodon grandiflorus root Entities (VSEs) — Part 5-4: Agile 2024-07-19
2024-07-01 software development guidelines
ISO/IEC DIS Information technology — Port-
ISO/DIS 19842 Traditional Chinese medicine — 9945 able Operating System Interface
Dioscorea opposita rhizome (POSIX®) base specifications — 2024-06-28
2024-07-02 Issue 8
(Revision of ISO/IEC/IEEE
ISO/DIS 19851 Traditional Chinese medicine — 9945:2009, ISO/IEC/IEEE 9945:2009/
Cinnamomum cassia branch Cor 1:2013, ISO/IEC/IEEE 9945:2009/
2024-07-03 Cor 2:2017)
ISO/IEC DIS Information technology — Security
TC 287 Sustainable processes for wood 27018 techniques — Code of practice for
protection of personally identifi- 2024-07-23
and wood-based products
able information (PII) in public
ISO/DIS 13391-1 Wood and wood-based products clouds acting as PII processors
— Greenhouse gas dynamics — (Revision of ISO/IEC 27018:2019)
Part 1: Framework for value chain 2024-07-12
calculations ISO/IEC DIS Information technology — Coding
14496-32 of audio-visual objects — Part 32:
ISO/DIS 13391-2 Wood and wood-based products File format reference software and 2024-07-19
— Greenhouse gas dynamics — conformance
Part 2: Forest carbon balance 2024-07-11 (Revision of ISO/IEC 14496-32:2021)

ISO Update, Supplement to ISO Focus -- May 2024 7

 ISO/IEC DIS Information technology — JPEG * Available in English only
18181-3 XL image coding system — Part 3:
Conformance testing 2024-07-17

(Revision of ISO/IEC 18181-3:2022) Vote

terminates
ISO/IEC DIS Information technology — JPEG
21617-1 Trust — Part 1: Core Foundation
2024-07-22 TC 8 Ships and marine technology
ISO/PRF 13205 Marine technology — Seawater
ISO/IEC 23001- Information technology — MPEG desalination — Vocabulary
17:2024/DAmd systems technologies — Part 17:
1 Carriage of uncompressed video 2024-07-17 TC 17 Steel
and images in ISO base media file
format — Amendment 1: High ISO/FDIS 10714 Steel and iron — Determination of
precision timing tagging phosphorus content — Phospho-
vanadomolybdate spectrophoto- 2024-06-21
ISO/IEC DIS Information technology — Dynam- metric method
23009-1 ic adaptive streaming over HTTP
(Revision of ISO 10714:1992)
(DASH) — Part 1: Media presenta- 2024-07-19
tion description and segment ISO/FDIS 4954-1 Steels for cold heading and cold
formats extruding — Technical delivery
(Revision of ISO/IEC 23009-1:2022) conditions — Part 1: Non-alloy and 2024-05-28
alloy steels
ISO/IEC 23090- Information technology — Coded
(Revision of ISO 4954:2022)
7:2022/DAmd 1 representation of immersive media
— Part 7: Immersive media meta- 2024-07-17 ISO/FDIS 4954-2 Steels for cold heading and cold
data — Amendment 1: Common extruding — Technical delivery
metadata for immersive media conditions — Part 2: Stainless steels 2024-05-28
ISO/IEC 23090- Information technology — Coded
(Revision of ISO 4954:2022)
10:2022/DAmd representation of immersive
2 media — Part 10: Carriage of visual 2024-07-18 TC 20 Aircraft and space vehicles
volumetric video-based coding
ISO/FDIS 11892 Space systems — Subsystems or
data — Amendment 2: Clarification
units to spacecraft interface control
on brands and other improvements
document 2024-06-24
ISO/IEC 23094- Information technology — General
4:2022/DAmd 1 video coding — Part 4: Conform- (Revision of ISO 11892:2012)
ance and reference software for 2024-07-17
ISO/FDIS 18676 Space systems — Requirements
essential video coding — Amend-
and guidelines for the manage-
ment 1: Green metadata supple-
ment of systems engineering 2024-06-17
mental enhancement information
ISO/IEC DIS Information technology — Au- (Revision of ISO 18676:2017)
21471 tomatic identification and data
ISO/DTS 20517 Space systems — Cybersecurity
capture techniques — Extended 2024-06-24
management requirements and
rectangular data matrix (DMRE) bar
recommendations 2024-06-17
code symbology specification
(Revision of ISO/IEC 21471:2020)
ISO/IEC 19794- Information technology — Biomet- TC 21 Equipment for fire protection
14:2022/DAmd ric data interchange formats — Part and fire fighting
1 14: DNA data — Amendment 1: 2024-07-05 ISO/PRF 7076-6 Fire protection — Foam fire
Conformance requirements extinguishing systems — Part 6:
ISO/IEC DIS Information technology — Biom- Vehicle-mounted compressed air
29794-5 etric sample quality — Part 5: Face foam systems
image data 2024-06-26 (Revision of ISO 7076-6:2016, ISO
7076-6:2016/Amd 1:2020)
(Revision of ISO/IEC TR TC 22 Road vehicles
29794-5:2010)
ISO/FDIS 2958 Road vehicles — Exterior protec-
ISO/IEC DIS Information technology — Artifi- tion for passenger cars
12792 cial intelligence — Transparency 2024-06-26
taxonomy of AI systems 2024-07-16
(Revision of ISO 2958:1973)
ISO 2575:2021/ Road vehicles — Symbols for
PRF Amd 1 controls, indicators and tell-tales —
Amendment 1
TC 23 Tractors and machinery for
agriculture and forestry

FDIS circulated ISO/FDIS

18497-1
Agricultural machinery and tractors
— Safety of partially automated,
semi-autonomous and autono- 2024-06-20
mous machinery — Part 1: Machine
design principles and vocabulary
Period from 01 April to 01 May 2024
(Revision of ISO 18497:2018)
These Final draft International Standards have been submitted to the ISO
member bodies for formal approval by the date shown

8 ISO Update, Supplement to ISO Focus -- May 2024

 ISO/FDIS Agricultural machinery and tractors ISO 16140- Microbiology of the food chain
18497-2 — Safety of partially automated, 4:2020/FDAmd — Method validation — Part 4:
semi-autonomous and autono- 2024-06-20 1 Protocol for method validation in 2024-06-24
mous machinery — Part 2: Design a single laboratory — Amendment
principles for obstacle protection 1: Validation of a larger test portion
systems size for qualitative methods
(Revision of ISO 18497:2018) ISO/FDIS 22174 Microbiology of the food chain —
ISO/FDIS Agricultural machinery and tractors Polymerase chain reaction (PCR)
18497-3 — Safety of partially automated, for the detection and quantifica- 2024-06-20
semi-autonomous and autono- 2024-06-20 tion of microorganisms — General
mous machinery — Part 3: Autono- requirements and definitions
mous operating zones (Revision of ISO 20837:2006, ISO
(Revision of ISO 18497:2018) 20838:2006, ISO 22174:2005, ISO
22119:2011)
ISO/FDIS Agricultural machinery and trac-
18497-4 tors — Safety of partially auto- TC 35 Paints and varnishes
mated, semi-autonomous and 2024-06-20
ISO/FDIS 1514 Paints and varnishes — Standard
autonomous machinery — Part 4:
panels for testing
Verification methods and validation
2024-05-31
principles
(Revision of ISO 18497:2018)
(Revision of ISO 1514:2016)
TC 24 Particle characterization includ-
TC 37 Language and terminology
ing sieving
ISO/DTS 6253 Requirements and recommenda-
ISO/DTS 5973 Laser diffraction measurements — tions for training programmes in
Good practice community interpreting 2024-05-28
2024-06-21

TC 39 Machine tools
TC 28 Petroleum and related prod-
ucts, fuels and lubricants from ISO/FDIS Woodworking machines — Safety
19085-11 — Part 11: Combined machines
natural or synthetic sources
2024-06-06
ISO/FDIS 10050 Lubricants, industrial oils and
related products (class L) — Fam- (Revision of ISO 19085-11:2020)
ily T (Turbines) — Specifications 2024-06-24
of triaryl phosphate ester turbine TC 44 Welding and allied processes
control fluids (category ISO-L-TCD) ISO/FDIS 18276 Welding consumables — Tubular
(Revision of ISO 10050:2005) cored electrodes for gas-shielded
and non-gas-shielded metal arc 2024-06-04
TC 34 Food products
welding of high strength steels
ISO/FDIS Infant formula and adult nutrition- — Classification
20631.2 als — Determination of total folate (Revision of ISO 18276:2017)
content by trienzyme extraction 2024-05-30
and ultra high performance liquid TC 45 Rubber and rubber products
chromatography tandem mass ISO/FDIS 19983 Rubber — Determination of preci-
spectrometry (UHPLC-MS/MS) sion of test methods
ISO 7301:2021/ Rice — Specification — Amend- 2024-05-27
FDAmd 1 ment 1
2024-06-24 (Revision of ISO 19983:2022)
TC 61 Plastics
ISO 6887- Microbiology of the food chain — ISO/PRF 8065 Composites and reinforcements
1:2017/FDAmd Preparation of test samples, initial fibres — Mechanoluminescent
1 suspension and decimal dilutions 2024-06-24 visualization method of crack
for microbiological examination — propagation for joint evaluation
Part 1: General rules for the prepa-
ration of the initial suspension and ISO/FDIS 14127 Carbon-fibre-reinforced compos-
decimal dilutions — Amendment 1: ites — Determination of the resin,
Requirements and guidance on the fibre and void contents 2024-06-18
use of larger test portion size for
qualitative methods (Revision of ISO 14127:2008)

ISO 16140- Microbiology of the food chain — TC 67 Oil and gas industries including
2:2016/FDAmd Method validation — Part 2: Proto- lower carbon energy
1 col for the validation of alternative 2024-06-24
ISO/FDIS Oil and gas industries including
(proprietary) methods against a
15590-1 lower carbon energy — Factory
reference method — Amendment
bends, fittings and flanges for pipe- 2024-05-29
1: Revision of qualitative method
line transportation systems — Part
comparison study data evalua-
1: Induction bends
tion, relative level of detection
(Revision of ISO 15590-1:2018)
calculations in the interlaboratory
study, calculation and interpreta- TC 68 Financial services
tion of the relative trueness study,
ISO/FDIS Financial services — Secure cryp-
and inclusion of a commercial
13491-1 tographic devices (retail) — Part 1:
sterility testing protocol for specific
Concepts and requirements 2024-06-17
products
(Revision of ISO 13491-1:2016)

ISO Update, Supplement to ISO Focus -- May 2024 9

 TC 69 Applications of statistical TC 106 Dentistry
methods ISO/FDIS 15098 Dentistry — Dental tweezers
ISO/FDIS 7870-6 Control charts — Part 6: EWMA
control charts for the process mean 2024-06-12
2024-06-12
(Revision of ISO 15098:2020)
(Revision of ISO 7870-6:2016) TC 107 Metallic and other inorganic
TC 70 Internal combustion engines coatings
ISO/DTS 19425 Reciprocating internal combustion ISO/FDIS 9717 Metallic and other inorganic
engines — Measurement method coatings — Phosphate conversion
for air cleaners — Sound power 2024-06-06 coating of metals 2024-05-30
level of combustion air inlet noise
and insertion loss using sound (Revision of ISO 9717:2017)
pressure
(Revision of ISO/TS 19425:2015)
TC 108 Mechanical vibration, shock
and condition monitoring
TC 71 Concrete, reinforced concrete
ISO/FDIS Condition monitoring and diag-
and pre-stressed concrete 13373-10 nostics of machines — Vibration
ISO/DTS Test methods for repair materials condition monitoring — Part 10: 2024-06-03
16774-1 for water-leakage cracks in under- Diagnostic techniques for electrical
ground concrete structures — Part 2024-06-17 generators with fluid film bearings
1: Test method for thermal stability
ISO 20816- Mechanical vibration — Measure-
(Revision of ISO/TS 16774-1:2017) 2:2017/PRF ment and evaluation of machine
ISO/DTS Test methods for repair materials Amd 1 vibration — Part 2: Land-based
16774-5 for water-leakage cracks in under- gas turbines, steam turbines and
ground concrete structures — Part 2024-06-21 generators in excess of 40 MW,
5: Test method for watertightness with fluid-film bearings and rated
(Revision of ISO/TS 16774-5:2017) speeds of 1 500 r/min, 1 800 r/min,
3 000 r/min and 3 600 r/min —
ISO/DTS Test methods for repair materials
Amendment 1
16774-6 for water-leakage cracks in under-
ground concrete structures — Part 2024-06-21 TC 131 Fluid power systems
6: Test method for response to the
ISO/FDIS 11619 Pneumatic fluid power — Polyu-
substrate movement
rethane and polyamide tubings
(Revision of ISO/TS 16774-6:2017) for use primarily in pneumatic 2024-05-27
TC 85 Nuclear energy, nuclear installations — Dimensions and
technologies, and radiological specification
protection (Revision of ISO/TS 11619:2014)

ISO/FDIS 14146 Radiological protection — Criteria TC 135 Non-destructive testing

and performance limits for the ISO/FDIS 18081 Non-destructive testing — Acous-
periodic evaluation of dosimetry 2024-06-05 tic emission testing (AT) — Leak
services for external radiation detection by means of acoustic 2024-05-27
(Revision of ISO 14146:2018) emission
ISO/FDIS 16646 Fusion installations — Criteria for (Revision of ISO 18081:2016)
the design and operation of con- TC 142 Cleaning equipment for air and
finement and ventilation systems 2024-05-28 other gases
of tritium fusion facilities and fu-
sion fuel handling facilities ISO/FDIS 23138 Biological equipment for treating
air and other gases — General
TC 94 Personal safety -- Personal requirements 2024-06-19
protective equipment
ISO 16321- Eye and face protection for oc- TC 145 Graphical symbols
1:2021/FDAmd cupational use — Part 1: General
1 requirements — Amendment 1 2024-06-14 ISO/FDIS Safety information for the content
20560-1 of piping systems and tanks — Part
1: Piping systems 2024-05-29
ISO/FDIS Protective clothing — Test
17491-5 methods for clothing providing (Revision of ISO 20560-1:2020)
protection against chemicals — 2024-06-26
Part 5: Determination of resistance TC 146 Air quality
to penetration by a spray of liquid ISO/FDIS 6323-1 Workplace air — Determination of
(manikin spray test) arsenic and arsenic compounds by
(Revision of ISO 17491-5:2013) electrothermal atomic absorption 2024-05-30
TC 96 Cranes spectrometry — Part 1: Arsenic and
arsenic compounds, except arsine
ISO/FDIS 23814 Cranes — Competency require- by ET-AAS
ments for crane inspectors
2024-06-04 TC 147 Water quality
ISO/FDIS 10253 Water quality — Marine algal
(Revision of ISO 23814:2009) growth inhibition test with
ISO/FDIS Cranes — Design calculation for <i>Skeletonema</i> sp. and 2024-05-28
16881-1 wheel/rail contacts and associated <i>Phaeodactylum tricornutum</
trolley track supporting structure 2024-06-20 i>
— Part 1: General (Revision of ISO 10253:2016)
(Revision of ISO 16881-1:2005) TC 150 Implants for surgery

10 ISO Update, Supplement to ISO Focus -- May 2024

 (Revision of ISO/TS 10303-15:2021)
ISO/FDIS 14630 Non-active surgical implants —
General requirements ISO/FDIS Automation systems and integra-
2024-06-14 20140-5 tion — Evaluating energy efficiency
and other factors of manufacturing 2024-06-18
(Revision of ISO 14630:2012) systems that influence the environ-
ment — Part 5: Environmental
ISO/FDIS 5910 Cardiovascular implants and extra-
performance evaluation data
corporeal systems — Cardiac valve
(Revision of ISO 20140-5:2017)
repair devices 2024-06-11
TC 190 Soil quality
(Revision of ISO 5910:2018)
ISO 11277:2020/ Soil quality — Determination of
TC 154 Processes, data elements and PRF Amd 1 particle size distribution in mineral
documents in commerce, soil material — Method by sieving
industry and administration and sedimentation — Amend-
ment 1
ISO/FDIS 23355 Visibility data interchange among
logistics information service TC 201 Surface chemical analysis
providers 2024-06-05 ISO 5861 Surface chemical analysis — X-ray
photoelectron spectroscopy —
TC 156 Corrosion of metals and alloys Method of intensity calibration for
quartz-crystal monochromated Al
ISO 9227:2022/ Corrosion tests in artificial Kα XPS instruments
PRF Amd 1 atmospheres — Salt spray tests
— Amendment 1: Footnote of TC 204 Intelligent transport systems
Warning ISO/PRF Intelligent transport systems —
ISO 10062:2022/ Corrosion tests in artificial atmos- 15784-2 Data exchange involving roadside
PRF Amd 1 phere at very low concentrations of modules communication — Part
polluting gas(es) — Amendment 1: 2: Centre to field device commu-
Footnote of Warning nications using Simple Network
Management Protocol (SNMP)
TC 159 Ergonomics (Revision of ISO 15784-2:2015, ISO
ISO/FDIS Ergonomic principles related to 15784-2:2015/Amd 1:2020)
10075-2 mental workload — Part 2: Design ISO/DTR Intelligent transport systems —
principles 2024-06-13 21734-3 Performance testing for con-
nectivity and safety functions of 2024-05-27
(Revision of ISO 10075-2:1996) automated driving buses in public
TC 172 Optics and photonics transport — Part 3: Service frame-
work and use cases
ISO/FDIS 8237 Optics and photonics — Optical
materials and components — TC 211 Geographic information/
Specification of chalcogenide glass 2024-06-03 Geomatics
used in the infrared spectrum ISO/DTS Geographic information — Classifi-
ISO/DTS 6838 Ophthalmic optics — Contact 19144-3 cation systems — Part 3: Land Use
lenses — Tolerances and methods Meta Language (LUML) 2024-07-15
for measurement of multifocal 2024-06-24
contact lens addition power TC 213 Dimensional and geometrical
ISO/DTR 11826 Ophthalmic optics – Spectacle product specifications and
lenses – Aspects of three-dimen- verification
sional properties and reference 2024-05-31
markings ISO/FDIS 5459 Geometrical product specifications
(GPS) — Geometrical tolerancing
TC 178 Lifts, escalators and moving — Datums and datum systems 2024-06-26
walks
ISO/DTS Lifts for the transport of persons (Revision of ISO 5459:2011)
8100-22 and goods — Part 22: Prerequisites TC 215 Health informatics
for certification of lifts, model lifts, 2024-05-30
lift components and lift functions ISO/DTS 5384 Health informatics — Categorial
(Revision of ISO/TS 22559-3:2011) structure and data elements for
the identification and exchange of 2024-06-26
ISO/DTS Lifts for the transport of persons immunization data
8100-23 and goods — Part 23: Require-
ments for bodies certifying lifts, 2024-05-30 ISO/IEEE FDIS Health informatics — Device inter-
model lifts, lift components and lift 11073-10425 operability — Part 10425: Personal
functions Health Device Communication — 2024-08-29
Device Specialization- Continuous
(Revision of ISO/TS 22559-4:2011)
Glucose Monitor (CGM)
ISO/DTS 8103-3 Escalators and moving walks — (Revision of ISO/IEEE
Part 3: Requirements from other 11073-10425:2019)
standards (ASME A17.1/CSA B44 2024-06-20
and Japanese codes) not included ISO/IEEE FDIS Health informatics — Device inter-
in ISO 8103-1 11073-10471 operability — Part 10471: Personal
Health Device Communication — 2024-08-29
TC 184 Automation systems and Device Specialization- Independent
integration Living Activity Hub
(Revision of ISO/IEEE
ISO/DTS Industrial automation systems and
11073-10471:2010)
10303-15 integration — Product data repre-
sentation and exchange — Part 15: 2024-06-04
Description methods: SysML XMI to
XSD transformation

ISO Update, Supplement to ISO Focus -- May 2024 11

 ISO/IEEE FDIS Health informatics — Device inter- ISO/FDIS 21512 Project, programme and portfolio
11073-10472 operability — Part 10472: Personal management — Earned value man-
Health Device Communication 2024-08-29 agement implementation guidance 2024-06-25
— Device Specialization — Medica-
tion Monitor
TC 261 Additive manufacturing
(Revision of ISO/IEEE
11073-10472:2012) ISO/FDIS 27548 Additive manufacturing of plastics
— Environment, health, and safety
ISO/IEEE FDIS Health informatics — Device
— Test method for determination 2024-06-05
11073-10700 interoperability — Part 10700:
of particle and chemical emission
Point‐of‐Care Medical Device 2024-08-29
rates from desktop material extru-
Communication –Standard for Base
sion 3D printer
Requirements for Participants in a
Service‐Oriented Device Connectiv- ISO/ASTM FDIS Additive manufacturing of met-
ity (SDC) System 52904 als — Process characteristics and
performance — Metal powder 2024-06-11
ISO/IEEE FDIS Health informatics — Device inter-
bed fusion process to meet critical
11073-10701 operability — Part 10701: Point-
applications
of-Care Medical Device Commu- 2024-08-29
(Revision of ISO/ASTM 52904:2019)
nication – Metric Provisioning by
Participants in a Service-Oriented TC 267 Facility management
Device Connectivity (SDC) System
ISO/DTR 41030 Facility management — Existing
TC 224 Drinking water, wastewater performance management in facil-
and stormwater systems and ity management organizations — 2024-05-31
services State of the industry

ISO/FDIS Drinking water, wastewater and TC 292 Security and resilience

24566-2 storm water systems and services ISO/FDIS 22359 Security and resilience — Guide-
— Adaptation of water services to 2024-05-30 lines for hardened protective
climate change impacts — Part 2: shelters 2024-06-25
Stormwater services
TC 229 Nanotechnologies TC 296 Bamboo and rattan
ISO/DTS 19590 Nanotechnologies — Characteriza- ISO/FDIS 5942 Bamboo-wood composite for
tion of nano-objects using single container flooring
particle inductively coupled plasma 2024-07-11 2024-06-24
mass spectrometry
(Revision of ISO/TS 19590:2017)
TC 299 Robotics
ISO/DTS Nanotechnologies — Vocabulary
80004-13 — Part 13: Graphene and other ISO/FDIS Robotics — Safety requirements —
two-dimensional (2D) materials 2024-07-22 10218-1 Part 1: Industrial robots
2024-05-30
(Revision of ISO/TS 80004-13:2017)
(Revision of ISO 10218-1:2011)
TC 249 Traditional Chinese medicine
ISO/FDIS Robotics — Safety requirements —
ISO/FDIS 6559 Traditional Chinese medicine — 10218-2 Part 2: Industrial robot applications
Sterile three-edge needle for single and robot cells 2024-05-30
use 2024-06-11
(Revision of ISO 10218-2:2011)
ISO/DTS 6818 Traditional Chinese medicine — JTC 1 Information technology
Test method for moxa floss quality
— Concentration of waste particles 2024-06-20 ISO/IEC FDIS Information technology — TLS
20648 specification for storage systems
2024-06-21
TC 251 Asset management
ISO/FDIS 55000 Asset management — Vocabulary, (Revision of ISO/IEC 20648:2016)
overview and principles ISO/IEC DTR Information technology – Regis-
2024-05-27 2375 tered escape sequences and coded
character sets 2024-06-03
(Revision of ISO 55000:2014)
ISO/FDIS 55001 Asset management — Asset man- (Revision of ISO/IEC 2375:2003)
agement system — Requirements ISO/IEC/IEEE Software engineering – Life cycle
2024-05-27 FDIS 41062 processes — Software acquisition
2024-06-20
(Revision of ISO 55001:2014)
ISO/FDIS 55012 Asset management — Guid- (Revision of ISO/IEC/IEEE
ance on people involvement and 41062:2019)
competence 2024-05-27 ISO/IEC FDIS Information security — Redaction
23264-2 of authentic data — Part 2: Re-
ISO/FDIS 55013 Asset management — Guidance on dactable signature schemes based 2024-06-21
the management of data assets on asymmetric mechanisms
2024-05-27 ISO/IEC PRF Information security, cybersecurity
27554 and privacy protection — Applica-
TC 258 Project, programme and port- tion of ISO 31000 for assessment of
folio management identity-related risk

12 ISO Update, Supplement to ISO Focus -- May 2024

 ISO/IEC PRF Information technology — Scalable
18477-1 compression and coding of con-
tinuous-tone still images — Part 1: Price
Core coding system specification group
(Revision of ISO/IEC 18477-1:2020)
ISO/IEC DTR Information technology — JPEG PC 250 Sustainability in event management
19566-9 Systems — Part 9: JPEG extensions
ISO 20121:2024 en Event sustainability management
mechanisms to facilitate forwards 2024-05-27
fr systems — Requirements with guidance
and backwards compatibility
for use G
ISO/IEC FDIS Information technology — Coded
23090-15 representation of immersive media
— Part 15: Conformance testing for 2024-06-04
PC 329 Consumer incident investigation
versatile video coding guideline
(Revision of ISO/IEC 23090-15:2022) ISO 5665:2024 fr Consumer incident investigation —
ISO/IEC PRF Information technology — Speci- en Requirements and guidance
23078-1 fication of digital rights manage- E
ment (DRM) technology for digital
publications — Part 1: Overview of TC 10 Technical product documentation
copyright protection technologies
in use in the publishing industry ISO 22014:2024 fr Library objects for architecture, engi-
(Revision of ISO/IEC TS en neering, construction and use
23078-1:2020) F

ISO/IEC PRF Information technology — Speci-

23078-2 fication of digital rights manage- TC 17 Steel
ment (DRM) technology for digital ISO 24476:2024 en Steel — Determination of oxygen —
publications — Part 2: User key- Infrared absorption method after fusion
based protection under inert gas (Routine method) B
(Revision of ISO/IEC TS
23078-2:2020)
ISO 9042:2024 en Steels — Point counting method for sta-
ISO/IEC PRF Information technology — Speci- tistically estimating the volume fraction
23078-3 fication of digital rights manage- of a constituent with a point grid B
ment (DRM) technology for digital
publications — Part 3: Device
ISO 6435:2024 en Stainless steel bars for the reinforcement
key-based protection
of concrete
(Revision of ISO/IEC TS
D
23078-3:2021)
ISO/IEC PRF Information technology — User
23773-3 interfaces for automatic simultane- TC 20 Aircraft and space vehicles
ous interpretation system — Part 3: ISO 1467:2024 en General purpose push-pull single-pole
System architecture circuit-breakers for aircraft — Perfor-
ISO/IEC FDIS Artificial intelligence — Data mance requirements C
5259-1 quality for analytics and machine
learning (ML) — Part 1: Overview, 2024-05-27 ISO 1509:2024 en General purpose push-pull three-pole
terminology, and examples circuit-breakers for aircraft — Perfor-
ISO/IEC FDIS Artificial intelligence — Data mance requirements C
5259-3 quality for analytics and machine
learning (ML) — Part 3: Data quality 2024-05-27 ISO fr Aerospace series — Test methods for
management requirements and 14085-3:2024 en hydraulic filter elements — Part 3: Filtra-
guidelines tion efficiency and retention capacity F
ISO/IEC FDIS Artificial intelligence — Data
5259-4 quality for analytics and machine ISO/TR en Experiment results on test methods for
learning (ML) — Part 4: Data quality 2024-05-27 23267:2024 detection and avoidance (DAA) systems
process framework for unmanned aircraft systems C

TC 22 Road vehicles
ISO en Road vehicles — Diagnostic commu-
15765-2:2024 nication over Controller Area Network
(DoCAN) — Part 2: Transport protocol F
and network layer services
ISO 23373:2024 en Heavy commercial vehicles and buses

Standards published — Vehicle dynamics simulation and

validation — Tyre model for lateral esti- B
mation of heavy vehicle combinations
operated at dry paved road surface
New International Standards published between 01 April and 01 May 2024 ISO 6621-4:2024 en Internal combustion engines — Piston
rings — Part 4: General specifications
1 delayed publication of language version E
2 corrected version
3 multilingual document ISO 5216:2024 en Commercial road vehicles — Ball-bear-
ing turntable — Interchangeability
A

ISO Update, Supplement to ISO Focus -- May 2024 13

 TC 24 Particle characterization including ISO en Health and safety in welding and allied
sieving 10882-2:2024 processes — Sampling of airborne parti-
cles and gases in the operator's breath- D
ISO en Determination of particle size distribu- ing zone — Part 2: Sampling of gases
13317-1:2024 tion by gravitational liquid sedimenta-
tion methods — Part 1: General princi- G ISO 3677:2024 en Filler metal for brazing - Designation
ples, requirements and guidance fr
A
TC 27 Coal and coke
ISO 17246:2024 en Coal and coke — Proximate analysis ISO 17672:2024 en Brazing — Filler metals
fr
A D

TC 28 Petroleum and related products, TC 45 Rubber and rubber products

fuels and lubricants from natural or
ISO 6472:2024 en Rubber compounding ingredients —
synthetic sources Abbreviated terms
ISO 8068:2024 en Lubricants, industrial oils and related D
fr products (class L) — Family T (Turbines)
— Specifications for lubricating oils for D
ISO 2398:2024 fr Rubber hoses, textile-reinforced, for
turbines
en compressed air — Specification
ISO 8216-1:2024 fr Products from petroleum, synthetic A
en and renewable sources — Fuels (class
F) classification — Part 1: Categories of A
ISO 4641:2024 fr Rubber hoses and hose assemblies
marine fuels
en for water suction and discharge
TC 34 Food products — Specification B
ISO 30024:2024 en Animal feeding stuffs — Determination
fr of phytase activity ISO 5771:2024 en Rubber hoses and hose assemblies
D fr for transferring anhydrous ammonia
— Specification C
ISO/TS fr Animal and vegetable fats and oils
16465:2024 — Determination of phthalates in ISO 6224:2024 fr Thermoplastics hoses, textile-reinforced,
vegetable oils D en for general-purpose water applications
— Specification B
ISO 20122:2024 en Vegetable oils — Determination of min-
fr eral oil saturated hydrocarbons (MOSH) ISO 5600:2024 en Rubber — Determination of adhesion
and mineral oil aromatic hydrocarbons F to rigid materials using conical shaped
(MOAH) with online-coupled high per- parts B
formance liquid chromatography-gas
chromatography-flame ionization detec- ISO 5603:2024 en Rubber, vulcanized — Determination of
tion (HPLC-GC-FID) analysis — Method adhesion to wire cord
for low limit of quantification C
ISO/TS en Molecular biomarkers — Detection of
5354-2:2024 DNA in cotton used for textile pro- ISO 6916-2:2024 en Flexible cellular polymeric materials —
duction — Part 2: Overview of target C Sponge and expanded cellular rubber
sequences for use in polymerase chain products — Part 2: Specification for D
reaction (PCR)-based detection methods mouldings and extrusions
for cotton genetically modified (GM)
events ISO 17717:2024 en Meteorological balloons — Specification

TC 37 Language and terminology D

ISO en Language resource management —
24613-6:2024 Lexical markup framework (LMF) — Part TC 46 Information and documentation
6: Syntax and semantics B
ISO/TR en Information and documentation — Is-
8344:2024 sues and considerations for managing
TC 39 Machine tools records in structured data environments G
ISO fr Woodworking machines — Safety —
19085-6:2024 en Part 6: Single spindle vertical moulding TC 58 Gas cylinders
machines (toupie) G
ISO 10297:2024 en Gas cylinders — Cylinder valves —
fr Specification and type testing
TC 43 Acoustics G
ISO en Characterization of pavement texture
13473-4:2024 fr by use of surface profiles — Part 4: One ISO 14456:2024 fr Gas cylinders — Gas properties and as-
third octave band spectral analysis of E en sociated classification (FTSC) codes
surface profiles F
TC 44 Welding and allied processes
ISO en Health and safety in welding and allied ISO 17871:2020/ fr Gas cylinders — Quick-release cylinder
10882-1:2024 processes — Sampling of airborne Amd 1:2024 en valves — Specification and type testing
particles and gases in the operator's E — Amendment 1 XZ
breathing zone — Part 1: Sampling of
airborne particles TC 60 Gears

14 ISO Update, Supplement to ISO Focus -- May 2024

 ISO 10828:2024 fr Worm gears — Worm profiles and gear ISO/TS en Water quality — Detection and quan-
en mesh geometry 12869-2:2024 tification of Legionella spp. and/or Le-
H gionella pneumophila by concentration D
and genic amplification by quantitative
polymerase chain reaction (qPCR) —
TC 68 Financial services Part 2: On-site methods
ISO 5201:2024 en Financial services — Code-scanning
payment security
TC 150 Implants for surgery
E ISO 5832-1:2024 en Implants for surgery — Metallic materi-
fr als — Part 1: Wrought stainless steel
A
TC 85 Nuclear energy, nuclear technolo-
gies, and radiological protection
ISO 5832-4:2024 en Implants for surgery — Metallic materi-
ISO/TS en Nuclear sector — Requirements for bod- fr als — Part 4: Cobalt-chromium-molyb-
23406:2024 fr ies providing audit and certification of denum casting alloy A
quality management systems for organi- C
zations supplying products and services
important to nuclear safety (ITNS) ISO 5832-7:2024 en Implants for surgery — Metallic materi-
fr als — Part 7: Forgeable and cold-formed
ISO 16795:2024 en Nuclear energy — Determination of cobalt-chromium-nickel-molybdenum- A
Gd₂O₃ con- iron alloy
tent in pellets containing uranium oxide B
by X-ray fluorescence spectrometry ISO 8637-2:2024 fr Extracorporeal systems for blood
en purification — Part 2: Extracorporeal
TC 94 Personal safety -- Personal protec- blood and fluid circuits for haemodialys- E
tive equipment ers, haemodiafilters, haemofilters and
ISO 24231:2024 fr Protective clothing — Protection haemoconcentrators
en against rain — Test method for ready- ISO en Preparation and quality management
made garments against high-energy B 23500-3:2024 fr of fluids for haemodialysis and related
droplets from above therapies — Part 3: Water for haemodi- C
TC 106 Dentistry alysis and related therapies

ISO 10394:2023 fr Dentistry — Designation system for ISO en Preparation and quality management
supernumerary teeth 23500-4:2024 fr of fluids for haemodialysis and related
A therapies — Part 4: Concentrates for D
haemodialysis and related therapies

ISO en Dentistry — Portable dental equipment ISO fr Preparation and quality management
23402-3:2024 fr for use in non‐permanent healthcare 23500-5:2024 en of fluids for haemodialysis and related
environment — Part 3: Portable suction C therapies — Part 5: Quality of dialysis B
equipment fluid for haemodialysis and related
therapies
TC 122 Packaging
TC 156 Corrosion of metals and alloys
ISO 7965-1:2024 fr Packaging — Drop test — Part 1: Paper
en sacks ISO 7539- fr Corrosion of metals and alloys — Stress
B 6:2018/Amd en corrosion testing — Part 6: Preparation
1:2024 and use of precracked specimens for XZ
tests under constant load or constant
TC 123 Plain bearings displacement — Amendment 1
ISO 3548- en Plain bearings — Thin-walled half ISO/TR en Corrosion of metals and alloys — Expo-
1:2022/Amd bearings with or without flange — Part 8547:2024 sure test results in the Asian Monsoon
1:2024 1: Tolerances, design features and meth- XZ region D
ods of test — Amendment 1
TC 126 Tobacco and tobacco products TC 159 Ergonomics
ISO 8454:2024 en Cigarettes — Determination of carbon ISO en Ergonomics of human-system interac-
fr monoxide in the vapour phase of ciga- 9241-820:2024 fr tion — Part 820: Ergonomic guidance
rette smoke — NDIR method B on interactions in immersive environ- F
ments, including augmented reality and
ISO 21766:2021 fr Tobacco and tobacco products — Deter- virtual reality
mination of tobacco-specific nitrosa- TC 170 Surgical instruments
mines in tobacco products — Method C
using LC-MS/MS ISO 7151:2024 en Surgical instruments — Non-cutting,
articulated instruments — General
TC 135 Non-destructive testing requirements and test methods A
ISO en Non-destructive testing — Charac-
18563-3:2024 fr terization and verification of ultrasonic TC 171 Document management
phased array equipment — Part 3: Com- E applications
plete systems
ISO/TS en Document management — Portable
TC 142 Cleaning equipment for air and 32004:2024 Document Format — Integrity protec-
other gases tion in encrypted documents in PDF 2.0 C
ISO en Requirements for aerosol filters used
23137-1:2024 fr in nuclear facilities against specified ISO/TS en Document management — Portable
severe conditions — Part 1: General C 32007:2024 Document Format — RichMedia anno-
requirements tations conforming to glTF assets B
TC 147 Water quality
TC 173 Assistive products

ISO Update, Supplement to ISO Focus -- May 2024 15

 ISO 16840- en Wheelchair seating — Part 2: Determi- ISO 21860:2020 fr Health Informatics — Reference stand-
2:2018/Amd nation of physical and mechanical char- ards portfolio (RSP) — Clinical imaging
1:2024 acteristics of seat cushions intended to XZ G
manage tissue integrity — Amendment
1: Updates and addition of new Annex
covering alternatively sized cushions
TC 224 Drinking water, wastewater and
stormwater systems and services
ISO 16840- en Wheelchair seating — Part 10: Resist-
10:2021/Amd ance to ignition of postural support de- ISO en Smart water management — Part 2:
1:2024 vices — Requirements and test method XZ 24591-2:2024 fr Data management guidelines
— Amendment 1: Amended with B
additional Annexes and test method
ISO/TS en Wheelchair seating — Part 15: Selection, TC 227 Springs
16840-15:2024 placement and fixation of flexible pos- ISO en Springs — Measurement and test
tural support devices in seating G 22705-3:2024 parameters — Part 3: Cold formed cylin-
drical helical torsion springs E
ISO 16021:2024 fr Absorbent incontinence products for
urine and/or faeces — Basic principles TC 228 Tourism and related services
for evaluation of single-use adult prod- B
ucts from the perspective of users and ISO 8804-1:2024 en Requirements for the training of scien-
caregivers tific divers — Part 1: Scientific divers
B
TC 174 Jewellery and precious metals
ISO 6893:2024 en Jewellery and precious metals — In- ISO 8804-2:2024 en Requirements for the training of scien-
fr spection of batches of small diamonds tific divers — Part 2: Advanced scientific
— Terminology, classification and test D divers B
methods
ISO 11427:2024 en Jewellery and precious metals — De- ISO 8804-3:2024 en Requirements for the training of scien-
fr termination of silver — Potentiometry tific divers — Part 3: Scientific diving
using potassium bromide A project leader B

ISO 13756:2024 en Jewellery and precious metals — De- ISO 24808:2024 en Recreational diving services — Require-
fr termination of silver — Potentiometry fr ments for rebreather instructor training
using sodium chloride or potassium A B
chloride
TC 188 Small craft TC 238 Solid biofuels
ISO 6185-3:2024 fr Inflatable boats — Part 3: Boats with ISO 18847:2024 en Solid biofuels — Determination of parti-
en a length of the hull less than 8 m with fr cle density of pellets and briquettes
a motor power rating of 15 kW and E C
greater
TC 190 Soil quality TC 249 Traditional Chinese medicine
ISO en Soil quality — Sampling of soil inverte- ISO 6904:2024 en Traditional Chinese Medicine — General
23611-2:2024 fr brates — Part 2: Sampling and extrac- requirements for the ultrafine powder
tion of micro-arthropods (Collembola C of herbs A
and Acarina)
TC 193 Natural gas TC 261 Additive manufacturing
ISO 2611-1:2024 en Analysis of natural gas — Halogen con- ISO/ASTM en Additive manufacturing for aerospace
fr tent of biomethane — Part 1: HCl and 52943-2:2024 fr — Process characteristics and per-
HF content by ion chromatography C formance — Part 2: Directed energy C
deposition using wire and arc
ISO 2615:2024 en Analysis of natural gas —Biomethane TC 267 Facility management
fr — Determination of the content of
compressor oil C ISO/TR en Facility management — Overview of
41016:2024 available technologies
F
TC 201 Surface chemical analysis
ISO 23124:2024 en Surface chemical analysis — Measure- TC 268 Sustainable cities and communities
ment of lateral and axial resolutions of a
Raman microscope B ISO 37124:2024 en Sustainable cities and communities —
Guidance on the use of ISO 37120, ISO
37122 and ISO 37123 D
TC 204 Intelligent transport systems
ISO/TR en Intelligent transport systems — Mobil- TC 269 Railway applications
17783:2024 ity integration — Role and functional
model for mobility services using low C ISO 24478:2023 en Railway applications — Braking — Gen-
Earth orbit (LEO) satellite systems eral vocabulary
E
TC 206 Fine ceramics
ISO 5618-2:2024 fr Fine ceramics (advanced ceramics, TC 276 Biotechnology
en advanced technical ceramics) — Test
method for GaN crystal surface defects D ISO en Biotechnology — Biobanking of para-
— Part 2: Method for determining etch 18209-1:2024 sites — Part 1: Helminths
pit density C

TC 215 Health informatics

16 ISO Update, Supplement to ISO Focus -- May 2024

 TC 279 Innovation management ISO/IEC fr Information technology — Auto-
15421:2010 matic identification and data capture
ISO 56008:2024 en Innovation management — Tools and
techniques — Bar code master test B
fr methods for innovation operation meas-
specifications
urements — Guidance G
ISO/IEC en Information technology — Automatic
24778:2024 identification and data capture tech-
ISO/TS fr Innovation management — Illustrative
niques — Aztec Code bar code symbol- F
56010:2023 examples of ISO 56000
ogy specification
C
ISO/IEC en Information technology — Data usage
5207:2024 — Terminology and use cases
TC 281 Fine bubble technology G
ISO 7392:2024 en Fine bubble technology — Evaluation
method for determining surface tension ISO/IEC en Information technology — Data usage
of ultrafine bubble dispersions D 5212:2024 — Guidance for data usage
E
ISO 7429-1:2024 en Fine bubble technology — Industrial
and consumer device applications — ISO/IEC en Information technology — Business op-
Part 1: Assessment of water pressure D 15944-17:2024 erational view — Part 17: Fundamental
driven nozzles by evaluating size and principles and rules governing Privacy- G
concentration indices of generated fine by-Design (PbD) requirements in an EDI
bubbles and collaboration space context
TC 295 Audit data services ISO/IEC en Information technology — Database
ISO 5401:2024 en Audit data collection — Customs and 39075:2024 languages — GQL
indirect tax extension H
E
ISO/IEC fr Information technology — Learning,
TC 299 Robotics 22602:2019 education and training — Competency
models expressed in MLR F
ISO 5363:2024 en Robotics — Test methods for exoskele-
ton-type walking RACA robot
C ISO/IEC TS en Information technology — Artificial
8200:2024 intelligence — Controllability of auto-
mated artificial intelligence systems E
TMBG Technical Management Board
- groups
ISO/IEC TR en Information technology — Artificial
ISO/IEC Guide fr Guide to the expression of uncertainty 24030:2024 intelligence (AI) — Use cases
98-1:2024 in measurement — Part 1: Introduction H
C

IULTCS International Union of Leather Tech-

nologists and Chemists Societies
ISO 20433:2024 en Leather — Tests for colour fastness —
fr Colour fastness to crocking
A

JTC 1
ISO/IEC en
Information technology
Information technology — City data
Standards confirmed
5087-2:2024 model — Part 2: City level concepts
F
The following International Standards are confimred for a five year period:
ISO/IEC en Information technology — Data Format
23415:2024 Description Language (DFDL) v1.0 TC 4 Rolling bearings
Specification H
ISO 13012-1:2018
ISO/IEC en Cards and security devices for personal ISO 13012-2:2018
22460-2:2024 identification — ISO UAS license and TC 22 Road vehicles
drone/UAS security module — Part 2: D
Drone/UAS security module ISO 7440-2:1991 (reconfirmed)

ISO/IEC TR en Information security, cybersecurity and ISO 7612:2018

5891:2024 privacy protection — Hardware moni- ISO/TS 11155-1:2001 (reconfirmed)
toring technology for hardware security E
assessment ISO 19825:2018

ISO/IEC 23008- en Information technology — High ef- ISO 20766-1:2018

6:2021/Amd ficiency coding and media delivery in ISO 20766-2:2018
1:2024 heterogeneous environments — Part 6: XZ
3D audio reference software — Amend- ISO 20766-3:2018
ment 1: Corrections for closest loud- ISO 20766-4:2018
speaker playout and increased software
resilience TC 23 Tractors and machinery for agriculture and
forestry
ISO 11783-3:2018
ISO 11783-6:2018

ISO Update, Supplement to ISO Focus -- May 2024 17

 ISO 25119-1:2018 ISO 8300:2013 (reconfirmed)
ISO 25119-3:2018 ISO 16117:2013 (reconfirmed)
ISO 25119-4:2018 ISO 18315:2018
TC 28 Petroleum and related products, fuels and TC 92 Fire safety
lubricants from natural or synthetic sources ISO/TS 5658-1:2006 (reconfirmed)
ISO/TS 21354:2020 ISO 834-6:2000 (reconfirmed)
TC 29 Small tools ISO/TS 19700:2016 (reconfirmed)
ISO 10073:2008 (reconfirmed) ISO 19701:2013 (reconfirmed)
ISO 10242-2:2008 (reconfirmed) ISO/TS 13447:2013 (reconfirmed)
ISO 10242-3:2008 (reconfirmed) ISO 23932-1:2018
ISO 11415:1997 (reconfirmed) TC 96 Cranes
ISO 20928:2018 ISO 7296-1:1991 (reconfirmed)
TC 34 Food products TC 104 Freight containers
ISO 7002:1986 (reconfirmed) ISO 1496-5:2018
ISO 8260:2008 (reconfirmed) TC 121 Anaesthetic and respiratory equipment
ISO 8262-1:2005 (reconfirmed) ISO 11195:2018
ISO 8262-2:2005 (reconfirmed) ISO 80601-2-55:2018
ISO 8262-3:2005 (reconfirmed)
TC 126 Tobacco and tobacco products
ISO 9231:2008 (reconfirmed)
ISO 3308:2012 (reconfirmed)
ISO/TS 9941:2005 (reconfirmed)
ISO 3401:1991 (reconfirmed)
ISO 11813:2010 (reconfirmed)
ISO 4388:1991 (reconfirmed)
ISO 12082:2006 (reconfirmed)
ISO 15592-1:2001 (reconfirmed)
ISO 18862:2016 (reconfirmed)
ISO 21045:2018
TC 35 Paints and varnishes ISO 7210:2018
ISO 11126-3:2018
TC 131 Fluid power systems
ISO 11126-8:2018
ISO 6263:2013 (reconfirmed)
TC 38 Textiles ISO 7790:2013 (reconfirmed)
ISO 5089:1977 (reconfirmed)
TC 134 Fertilizers, soil conditioners and beneficial
ISO 15831:2004 (reconfirmed) substances
ISO 18254-2:2018 ISO 20977:2018
ISO 20645:2004 (reconfirmed) ISO 22146:2018
ISO 13934-1:2013 (reconfirmed) TC 135 Non-destructive testing
ISO 20932-1:2018 ISO 9934-2:2015
ISO 20932-2:2018 ISO 9934-3:2015
ISO 20932-3:2018 ISO 12707:2016
TC 42 Photography TC 138 Plastics pipes, fittings and valves for the
ISO 1008:1992 (reconfirmed) transport of fluids
TC 43 Acoustics ISO/TS 26873:2010 (reconfirmed)
ISO 4871:1996 (reconfirmed) TC 150 Implants for surgery
ISO 8297:1994 (reconfirmed) ISO 13781:2017 (reconfirmed)
ISO 9614-1:1993 (reconfirmed) TC 165 Timber structures
ISO 9614-2:1996 (reconfirmed) ISO 9709:2018
ISO 9614-3:2002 (reconfirmed) ISO 12122-5:2018
ISO 10843:1997 (reconfirmed) TC 172 Optics and photonics
ISO 13473-2:2002 (reconfirmed) ISO 10629:1996 (reconfirmed)
TC 45 Rubber and rubber products ISO 12123:2018
ISO 8096:2005 (reconfirmed) TC 173 Assistive products
TC 67 Oil and gas industries including lower carbon ISO 7176-30:2018
energy TC 184 Automation systems and integration
ISO 14691:2008 (reconfirmed) ISO 14649-1:2003 (reconfirmed)
ISO 20088-3:2018
TC 185 Safety devices for protection against exces-
TC 79 Light metals and their alloys sive pressure
ISO 7271:2011 (reconfirmed) ISO 4126-2:2018
TC 85 Nuclear energy, nuclear technologies, and TC 190 Soil quality
radiological protection

18 ISO Update, Supplement to ISO Focus -- May 2024

 ISO 20295:2018 ISO 12199:2022 (replaced by )
TC 197 Hydrogen technologies TC 43 Acoustics
ISO 16111:2018 ISO/TS 13473-4:2008 (replaced by ISO 13473-4:2024)
TC 198 Sterilization of health care products TC 60 Gears
ISO 18472:2018 ISO/TR 10828:2015 (replaced by ISO 10828:2024)
TC 202 Microbeam analysis TC 130 Graphic technology
ISO 20720:2018 ISO/PAS (replaced by )
15339-2:2015
TC 204 Intelligent transport systems
ISO 16407-2:2018
TC 215 Health informatics
ISO/TR 11487:2008 (replaced by )
ISO 16410-2:2018
ISO 22839:2013 (reconfirmed) TMBG Technical Management Board - groups
IWA 28:2018 (replaced by )
TC 206 Fine ceramics
ISO 23145-1:2007 (reconfirmed)
TC 215 Health informatics
ISO 13940:2015
TC 219 Floor coverings
ISO 23996:2007
ISO 23997:2007
(reconfirmed)
(reconfirmed)
Meeting calendar
ISO 24343-3:2018 The meeting calendar is available at
TC 221 Geosynthetics https://www.iso.org/meeting-calendar.html
ISO 12957-1:2018
ISO/TS 13434:2020
ISO 13438:2018
TC 228 Tourism and related services
ISO 20611:2018
TC 256 Pigments, dyestuffs and extenders
ISO 4620:1986 (reconfirmed)
ISO 6503:1984 (reconfirmed)
ISO 6713:1984 (reconfirmed)
ISO 18473-3:2018
TC 274 Light and lighting
ISO/TS 21274:2020
TC 282 Water reuse
ISO 20468-1:2018
ISO 20469:2018
JTC 1 Information technology
ISO/IEC (reconfirmed)
24769-2:2013
ISO/IEC
29167-21:2018
ISO/IEC
29167-22:2018

Standards withdrawn
Period from 01 April to 01 May 2024

TC 8 Ships and marine technology

ISO 4001:1977 (replaced by )
TC 37 Language and terminology

ISO Update, Supplement to ISO Focus -- May 2024 19