Scribd
Upload
82 views2 pages

SecurView DX Quick Reference Guide (MAN-04945) English Rev - 003 01-2020

Uploaded by

Manuel Monsalve
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
82 views2 pages

SecurView DX Quick Reference Guide (MAN-04945) English Rev - 003 01-2020

Uploaded by

Manuel Monsalve
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SecurView® DX Tomosynthesis Imaging

Quick Reference Guide

This guide provides brief explanations of options commonly used when displaying tomosynthesis images on the
SecurView DX workstation. For complete instructions, see the SecurView® DX/RT Workstation User Guide.
 To toggle between projection, MG, generated 2D, and reconstructed slices: Reconstruction Cine
Click Projection to display projection images.

Click MG images to display conventional mammography or Hologic generated


2D images. Click repeatedly to switch between available mammography
images, if more than one image is available. Projection MG Images
MG/Tomosynthesis
Click MG/Tomosynthesis Toggle to switch between mammography images
Toggle
and reconstructed slices.
 To navigate reconstructed slices:
Click Reconstruction to display the slider tool. To select a slice: Orientation
• Click any location on the slider tool, or (H, F, L, M)
Reconstruction • Move the slider handle, or
• Rotate the scroll wheel on the mouse or keypad.
Slider Handle
Tip: With a user preference, you can set the mouse/keypad wheel mode
to Sequential or Advanced (one or several slices at a time). Slab Thickness
Bar
 To use Cine mode:
• Click Cine or press the Cine button on the workflow keypad.
• Adjust speed with speed controller.
Cine • Click Cine Boundary to hide speed controller. Click Cine Boundary again to
restore.
Tip: Set the default speed with a user preference.

 To stop Cine mode: Boundary Speed Controller


• Click Cine again, press the Cine button, or rotate mouse or keypad scroll
wheel.
 To start Local Cine mode:
• Press and hold Cine on the workflow keypad, or
• Click and hold Cine on the display, or
Cine • Press [F6] on the keyboard.
Tip: Set the Local Cine slice range with a user preference.

 To change the Local Cine center slice:


• While Local Cine mode is running, rotate the mouse wheel or keypad scroll
wheel.

 To stop Local Cine mode:


• Click Cine again, press the Cine button or press [F6].

 To change the number of displayed slices (slab thickness):


• To display the V-Split cursor, point mouse at the slab thickness bar (see Slab Thickness
above), then click and drag up or down.
V-Split Cursor
• To reset, double-click the slab thickness bar.
Tip: Set the default slab thickness with a user preference.

MAN-04945 Revision 003, Page 1 of 2


SecurView® DX Tomosynthesis Imaging
Quick Reference Guide

 To tag reconstructed slices:


Arrow Up
Display the slice, then:
• Press Spacebar, or Arrow Down
• Right-click the image and from the Pie menu select Tag Tomo Images.
Tag Tomo Images Note: Slab thickness must be set to 1 slice to allow tagging.
Tagged Slice
 To display the next or previous tagged slice: Slice Tagged by
Click Arrow Up or Arrow Down on the navigation tool. Another User

 To remove a tag:
Display the tagged slice and press Spacebar (or select Tag Tomo Images
again).
 To link tiles for scrolling:
Display images to be linked. The displayed images must be of the same type,
either reconstructed slices or projections.
1 Right-click the image and select Link Tile from the Pie menu.
Link Tile 2 Repeat for each tile to be linked. The Link Tile indicator appears on each
linked tile.
3 To scroll linked tiles:
• Rotate the mouse wheel, or
• Move the slider handle for a linked tile, or
• Start Cine mode.
 To export a movie of tomosynthesis images:
1 Right-click a reconstruction or projection image to open the Pie menu,
then point to Image Tools to open the second Pie menu.
2 Click Export Movie to open the Export Movie dialog.
Export Movie 3 Make selections in the dialog and click Export.
4 Select path, enter a movie filename, and confirm.
 To export Tiff images:
1 Tag the desired mammography reconstruction slice(s) or projection
image(s) as explained above.
2 Press [E] (for Export), select ‘Tiff’, and click Export.
3 Browse to the desired folder and click OK. SecurView exports all images
currently tagged on the two displays.

© 2017 - 2019 Hologic Inc. Printed in the USA. This manual was originally written in English.
Hologic, SecurView, and associated logos are trademarks and/or registered trademarks of Hologic, Inc., and/or its subsidiaries in
the United States and/or other countries. All other trademarks, registered trademarks, and product names are the property of
their respective owners.
This product may be protected by one or more U.S. or foreign patents as identified at www.Hologic.com/patents.

Hologic, Inc. For more information about


36 Apple Ridge Road Hologic products and services,
Danbury, CT, 06810 USA visit www.hologic.com.
Tel: +1.877.371.4372

MAN-04945 Revision 003, Page 2 of 2

You might also like