Page:1/20

100
De%, ow
Ma and sign n
nuf own
act
Technical Teaching Equipment Products List urin
g
www.edibon.com

Index
Units
Page nº:
1.- (www.edibon.com®Products®Products range ®Units®1.-Physics)
Physics ...................................................................................................................................... 2

2.- (www.edibon.com ®Products®Products range ®Units®2.-Electronics)

Electronics................................................................................................................................. 2-3

3.- (www.edibon.com®Products®Products range ®Units®3.-Communications)

Communications....................................................................................................................... 4

4.- Electricity...................................................................................................................................
(www.edibon.com® Products®Products range ®Units®4.-Electricity)
C/ Del Agua, 14. Polígono Industrial San José de Valderas. 28918 LEGANÉS. (Madrid). SPAIN. Phone: +34 920199363. Fax: +34 920198647. [email protected]

5-7

5.- (www.edibon.com®Products ®Products range®Units®5.-Energy)

Energy....................................................................................................................................... 8

6.- Automation & Systems..............................................................................................................

(www.edibon.com ®Products ®Products range ®Units®6.-Automation & Systems) 9

7.- (www.edibon.com®Products®Products range®Units®7.-Mechanics & Materials)

Mechanics & Materials............................................................................................................. 10

8.- (www.edibon.com ®Products®Products range®Units ®8.-Fluid Mechanics & Aerodynamics)

Fluid Mechanics & Aerodynamics........................................................................................... 11-12

9.- (www.edibon.com®Products ®Products range®Units®9.-Thermodynamics & Thermotechnics)

Thermodynamics & Thermotechnics...................................................................................... 12-15
(www.edibon.com®Products ®Products range®Units ®10.-Process Control)
10.- Process Control......................................................................................................................... 16
(www.edibon.com® Products®Products range®Units ®11.-Chemical Engineering)
11.- Chemical Engineering............................................................................................................. 17-18
(www.edibon.com® Products®Products range®Units ®12.-Food & Water Technologies)
12.- Food & Water Technologies..................................................................................................... 18-19
(www.edibon.com®Products®Products range® Units ®13.-Environment)
13.- Environment............................................................................................................................. 19

Complete Laboratories and Industrial Systems (page 20)

Turn-Key Projects (page 20)

- Technical and Vocational Education. - Higher Technical Education.

Custom made Units (page 20)

EDIBON can offer the design of teaching and research units, in accordance with the customer requirements, by using the EDIBON know-how and
computer controlled system, as we have developed big amount of new Teaching and Research Technology.

Other units
See EDILAB products. (www.edilab.es/BETA/products)

Teaching Techniques Used

* 3D= EDIBON Three Dimensions System.
Real Time Control, obtaining results in Three Dimensions.
CAI= Computer Aided Instruction Software System.
The computer guides the student what to do and the teacher controls the student work.
CAL= Computer Aided Learning Software (Results Calculation and Analysis).
EDAS/VIS= EDIBON Data Acquisition System/Virtual Instrumentation System.
MUAD= Electric Power Data Acquisition System.
* RTC= EDIBON Real Time Control System.
Electronic Real Time Control for Advanced Electronics.
* HYBRID= EDIBON Hybrid System (Energy).
It uses Real Units combined with Software, using mathematical models.
* PHOTOELASTICITY= For Strength of Materials.
* SCADA= EDIBON Computer Control System: Computer Control + Data Acquisition + Data Management.
Multicontrol + Real Time Control + Open Control.
* PLC= Industrial Control using PLC.
* Mini ESN= EDIBON Mini-Scada-Net System.
30 students can work simultaneously doing Real Time Computer Control.
* ESN= EDIBON Scada-Net System (Management Control from a local NET).
30 students can work simultaneously doing Real Time Computer Control.
* ETDL= EDIBON Technical Distance Learning System.
The Scada-Net System can be controlled through Internet at any distance.
FSS= Faults Simulation System.

*=These Teaching Techniques are EDIBON PATENT. Issue: HPI0111

Date: January/2011

Worlddidac
Member

ISO 9000: Quality Management European Union Certificate Certificates ISO 14000 and Worlddidac Quality Charter
(for Design, Manufacturing, (total safety) ECO-Management and Audit Scheme Certificate
Commercialization and After-sales service) (environmental management) (Worlddidac Member)
 Products List Page:2/20
Units
Digital Electronics
1.-Physics
1.1.- 3D Physics (Three Dimensions) (It uses 3D System) ! M10 Digital Systems & Converters.

! M11 Digital Electronics Fundamentals.

- EFAC Computer Controlled Three Dimensions (3D) Physics
System: ! M12 Basic Combinational Circuits.
! FUB Base structure and Robot. (Common for all applications type “F"). ! M13 Basic Sequential Circuits.

Sets (sensor+elements+control software) required for each ! M14 Optoelectronics.

application
! M41 Resistance Transducers.
! FCE Set for Electrical Fields application.
Basic Electricity concepts
! FCM Set for Magnetic Fields application.
! M5 Power Supplies.
! FM Set for Mechanics Study application.
! M1 Direct Current (D.C.) Circuits.
! FAC Set for Acoustics Study application.
! M2 Alternating Current (A.C.) Circuits.
! FOP Set for Optics Study application.
! M16 Electric Networks.
! FTT Set for Thermodynamics Study application.
! M17 Electromagnetism.

! M18 Three-phase Circuits.

2.- Electronics
Electronics Applications
2.1.- Basic Electronics (It uses CAI and/or CAL and/or EDAS/VIS System)
! M43 Applications of Temperature.
- LIEBA Basic Electronics and Electricity Integrated Laboratory:
! M49 Applications of Temperature and Pressure.
Power Supplies ! M44 Applications of Light.
(one power supply required)

! M45 Linear Position and Force.

! FA-CO Power Supply.
! M46 Environmental Measurements.
! EBC-100 Base Unit, with built-in power supply.
! M15 Development Module.
Modules
! M48 Sounds Measurements.
Basic Electronics concepts
Control
! M3 Semiconductors I.
! M65 Control and Regulation.
! M4 Semiconductors II.
! M47 Rotational Speed & Position Control.
! M6 Oscillators.
Basic Electronics: Microprocessors
! M7 Operational Amplifiers. ! M30 16 Bits Microprocessor. (EDILAB)
! M8 Filters. ! M31 Z80 Microprocessor. (EDILAB)
! M9 Power Electronics. ! M-EB Practical Expansion Boards. (EDILAB)

! M60 Analog/Digital Converters. ! M32 8051 Microcontroller. (EDILAB)

! M61 Digital/Analog Converters. ! M33 68000 Microprocessor. (EDILAB)

! M99 Expansion Board. ! M34 DSP Microprocessor. (EDILAB)

Software
Some electronic sub-boards available:
- CAI Computer Aided Instruction Software System,
! M99-1 Analogical Commutator. additional and optional to the Modules type “M”.

! M99-2 Analogical Multiplier. - LIEBA/CAL Computer Aided Learning Software (Results

Calculation and Analysis), additional and optional
! M99-3 Function Generator. to the Modules type “M”.

Data Acquisition and Virtual Instrumentation

! M99-4 AM Modulator.
- EDAS/VIS 0.25 EDIBON Data Acquisition System/Virtual
! M99-5 AM Demodulator. Instrumentation System, for being used with the
Modules type “M”.
! M99-6 Motors, Generators and Controls.
- EDAS/VIS 1.25 EDIBON Data Acquisition System/Virtual
* We can develop any electronic sub-board according to the Instrumentation System, for being used with the
application required by the customer. Modules type “M”.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:3/20
Units
2.2.- Electronics Kits (It uses CAI and/or CAL and/or EDAS/VIS System) - BS Modular System for the Study of Sensors: (It uses SCADA System)
Base Units
- M-KITS Basic Electronics and Electricity Assembly Kits: (one base unit is required)

Required elements by any Kit ! BSPC Computer Controlled Base Unit.

! FA-CO Power Supply. ! BSUB Base Unit (no computer controlled).
! M15 Development module. Modules

Assembly Kits ! BS-1 Vibration and/or Deformation Test Module.

Basic Electronics concepts ! BS-2 Temperature Test Module.

! M3-KIT Semiconductors I. ! BS-3 Pressure Test Module.

! M4-KIT Semiconductors II. ! BS-4 Flow Test Module.

! BS-5 Ovens Test Module.
! M6-KIT Oscillators.
! BS-6 Liquid Level Test Module.
! M7-KIT Operational Amplifiers.
! BS-7 Tachometers Test Module.
! M8-KIT Filters.
! BS-8 Proximity Test Module.
! M9-KIT Power Electronics.
! BS-9 Pneumatic Test Module.
Digital Electronics
! BS-10 Light Test Module.
! M10-KIT Digital Systems & Converters.
- SPC Computer Controlled Weighing System. (It uses SCADA System)
! M11-KIT Digital Electronics Fundamentals.
- SCSP Pressure Sensors Calibration System.
! M12-KIT Basic Combinational Circuits.
! M13-KIT Basic Sequential Circuits.
2.4.- Control Electronics (Advanced) (It uses RTC System)
! M14-KIT Optoelectronics.
- RYC Computer Controlled Teaching Unit for the Study of
Basic Electricity concepts Regulation and Control.
! M5-KIT Power Supplies. - RYC/SOF Regulation and Control Simulation Software.
! M1-KIT Direct Current (D.C.) Circuits. - CADDA Computer Controlled Teaching Unit for the Study of
Analog/Digital and Digital/Analog Converters.
! M2-KIT Alternating Current (A.C.) Circuits.
- CADDA/SOF Analog/Digital and Digital/Analog Converters
! M16-KIT Electric Networks. Simulation Software.

Software

- CAI Computer Aided Instruction Software System, 2.5.- Digital Electronics (Advanced) (It uses RTC System)
additional and optional to the Kits type “M-KIT”.
- TDS Computer Controlled Teaching Unit for the Study of
- CAL Computer Aided Learning Software (Results Digital Signal Processing.
Calculation and Analysis), additional and optional
to the Kits type “M-KIT”. - TDS/SOF Digital Signal Processing Simulation Software.
Data Acquisition and Virtual Instrumentation

- EDAS/VIS 0.25 EDIBON Data Acquisition System/Virtual

Instrumentation System, for being used with the 2.6.- Industrial Electronics (Advanced) (It uses RTC System)
Kits type “M-KIT”.
- TECNEL Computer Controlled Teaching Unit for the Study of
- EDAS/VIS 1.25 EDIBON Data Acquisition System/Virtual Power Electronics (with IGBTS). (Converters: DC/AC +
Instrumentation System, for being used with the AC/DC + DC/DC + AC/AC).
Kits type “M-KIT”.
- TECNEL/B Computer Controlled Basic Teaching Unit for the Study
of Power Electronics (no IGBTS). (Converters: AC/DC +
AC/AC).
2.3.- Transducers and Sensors - PECADS Power Electronics Computer Aided Design and
Simulation Software. (Converters: DC/AC, AC/DC,
- SAIT Transducers and Instrumentation Trainer. DC/DC, AC/AC).

Software - SERIN/CA Computer Controlled Advanced Industrial Servosystems

Trainer (AC motors).
- CAI Computer Aided Instruction Software System,
additional and optional to “SAIT” Trainer. - SERIN/CC Computer Controlled Advanced Industrial Servosystems
Trainer (DC motors).
Additional Data Acquisition and Virtual Instrumentation
- SERIN/CACC Computer Controlled Advanced Industrial Servosystems
- EDAS/VIS 0.25 EDIBON Data Acquisition System/Virtual Trainer (AC and DC motors).
Instrumentation System, for being used with “SAIT”
Trainer. - SERIN/CCB Basic Servosystems Trainer (DC motors).

- EDAS/VIS 1.25 EDIBON Data Acquisition System/Virtual - SERIN/CAB Basic Servosystems Trainer (AC motors).
Instrumentation System, for being used with “SAIT”
Trainer. - SERVOS/SOF Servosystems Simulation Software.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:4/20
Units
3.- Communications 3.3.- Telephony
3.1.- Analog Communications (It uses CAI and/or CAL and/or - CODITEL Telephony Systems Trainer.
EDAS/VIS System)

- LICOMBA Communications Integrated Laboratory:

Power Supplies 3.4.- Applied Communications
(one power supply required)
- EGPS GPS Trainer.
! FA-CO Power Supply.
- EAN Antenna Trainer.
! EBC-100 Base Unit, with built-in power supply.
- ESA Satellite Trainer.
Modules
- EMI Microwave Trainer.
! ED-CAM AM Communications.
- EBL Bluetooth Trainer.
! ED-CFM FM Communications.
Software - ETM Cellular Mobile Trainer.

- CAI Computer Aided Instruction Software System, - ERA Radar Trainer.

additional and optional to the Modules “ED-CAM and
ED-CFM”.
- LICOMBA/CAL Computer Aided Learning Software (Results
Calculation and Analysis), additional and optional
to the Modules “ED-CAM and ED-CFM”.
Data Acquisition and Virtual Instrumentation
- EDAS/VIS 0.25 EDIBON Data Acquisition System/Virtual
Instrumentation System, for being used with the
Modules “ED-CAM and ED-CFM”.
- EDAS/VIS 1.25 EDIBON Data Acquisition System/Virtual
Instrumentation System, for being used with the
Modules “ED-CAM and ED-CFM”.

- EMDA Analogue and Digital Modulations Trainer.

3.2.- Digital Communications (It uses CAI and/or CAL and/or

EDAS/VIS System)

- LICOMBA Communications Integrated Laboratory:

Power Supplies
(one power supply required)

! FA-CO Power Supply.

! EBC-100 Base Unit, with built-in power supply.
Modules
! EDICOM1 Signals Sampling and Reconstruction.
! EDICOM2 Time Division Multiplex (TDM). PAM Transmitter
and Receiver.
! EDICOM3 MIC-TDM Transmission/Reception.
! EDICOM4 Delta Modulation and Demodulation.
! EDICOM5 Line codes. Signal Modulation and
Demodulation.
! EDICOM6 Optical Fibre Transmission and Reception.
Software
- CAI Computer Aided Instruction Software System,
additional and optional to the Modules type “EDICOM”.
- LICOMBA/CAL Computer Aided Learning Software (Results
Calculation and Analysis), additional and optional
to the Modules type “EDICOM”.
Data Acquisition and Virtual Instrumentation
- EDAS/VIS 0.25 EDIBON Data Acquisition System/Virtual
Instrumentation System, for being used with the
Modules type “EDICOM”.
- EDAS/VIS 1.25 EDIBON Data Acquisition System/Virtual
Instrumentation System, for being used with the
Modules type “EDICOM”.

- EMDA Analogue and Digital Modulations Trainer.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:5/20
Units
Speed Control
4.- Electricity
4.1.- Basic Electricity (It uses CAI and/or CAL and/or MUAD System) ! AI3 Speed Commutator for Dahlander Motor.

- LIELBA Electrical Installations Integrated Laboratory: ! AI7 Automatic Change of Speed of a Dahlander Motor
with Change of Direction.
Frames (applications support)
Electrotecnics
! BASB Basic frame.
! AI8 Reactive Power Compensation (Power Factor
! BASS Double frame, single side working post. Correction).

APPLICATIONS: ! AI13 Modular Trainer for Electrotecnics.

Domestic Electrical Installations
! AI13-A Modular Trainer for Electrotecnics (RLC Circuits).
General
! AI13-B Modular Trainer for Electrotecnics (Electrostatic
! AD1A Robbery Alarm Station. Kit).

! AD3A Fire Alarm Station. ! AI13-C Modular Trainer for Electrotecnics (Motors).
! AD5 Temporization of Stairs. ! AI13-D Modular Trainer for Electrotecnics (Transformers).
! AD13 Audio Door Entry System. ! AI13-E Modular Trainer for Electrotecnics (Lighting).
! AD14 Audio and Video Door Entry System. Safety
Industrial Control
! AI9 People Safety Against Indirect Electrical Contacts
! AD6A Luminosity Control Station. in TT Neutral Regimen.

! AD9A Heating Control Station. ! AI10 People Safety Against Indirect Electrical Contacts
in TN Neutral Regimen.
! AD15A Position Control Station.
! AI11 People Safety Against Indirect Electrical Contacts
! AD17A Photoelectric Control Position Station. in IT Neutral Regimen.

! AD22 Flooding Control Station. Energy Installations

! AD23 Wireless Basic Control Station (RF). Protection and Relays

! AD24 Position Switch. ! AE3 Test Unit for Magneto-Thermal Automatic

Switches.
! AD25A Control Station for Domestic Electric Services through
the Telephone. ! AE4 Test Unit for Differential Automatic Switches.
! AD28A Integral Control Station of Domestic Electric Systems.
! AE5 Relay Control Station.
! AD30 Gas Control Station.
! AE7 Multi-Functional Electrical Protection Station.
Sound
! AE9 Directional Relay: Earth Fault Detection. Directional
! AD19A Sound Station. Power Flow Detection. Reactive Power Flow Detection.

! AD31 Movement and Sound Detection and Control. Measurements and Control

Instruments ! AE2 Reactive Energy Control and Compensation.

! AD8 Blinds Activator.
! AE6 Energy Counters Control Station.
! AD11A Network Analyzer.
! AE8 Power & Torque Measurements of Electrical
! AD32 24 Vac/12 Vdc Circuits Analyzer. Motors.

! AD33 Installations Faults Simulator. Lines

Industrial Electrical Installations ! AE1 Aerial Line Model.

Starters and Motors Software

! AI1 Star-Delta Starter. - CAI Computer Aided Instruction Software System,

additional and optional to the LIELBA Applications type “A”.
! AI2 Starter through Auto-Transformer.
- CAL Computer Aided Learning Software (Results
! AI4 Starter-Inverter. Calculation and Analysis), additional and optional to
the LIELBA Applications type “A”.
! AI5 AC Wound Rotor Motor Starter.
Data Acquisition
! AI6 DC Motor Starter.
- MUAD Electric Power Data Acquisition System, for being
! AI12 Modular Trainer (AC Motors). used with the LIELBA Applications type “A”.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:6/20
Units
- ELE-KITS Electrical Installations Assembly Kits: Electrotecnics

! BAS-K Installation Cubicle. ! KI8 Kit of Reactive Power Compensation (Power Factor
Correction).
KITS:
Safety
Domestic Electrical Installations
! KI9 Kit of People Safety Against Indirect Electrical
General Contacts in TT Neutral Regimen.

! KD1A Robbery Alarm Station Kit. ! KI10 Kit of People Safety Against Indirect Electrical
Contacts in TN Neutral Regimen.
! KD3A Fire Alarm Station Kit.
! KI11 Kit of People Safety Against Indirect Electrical
! KD5 Temporization of Stairs Kit. Contacts in IT Neutral Regimen.

! KD13 Audio Door Entry System Kit. Energy Installations

Protection and Relays

! KD14 Audio and Video Door Entry System Kit.

Industrial Control
! KE3 Kit of Test Unit for Magneto-Thermal Automatic
Switches.
! KD6A Luminosity Control Station Kit. ! KE4 Kit of Test Unit for Differential Automatic Switches.
! KD9A Heating Control Station Kit. ! KE5 Relay Control Station Kit.
! KD15A Position Control Station Kit. ! KE7 Multi-Functional Electrical Protection Station Kit.
! KD17A Photoelectric Control Position Station Kit. ! KE9 Kit of Directional Relay: Earth Fault Detection.
Directional Power Flow Detection. Reactive Power Flow
! KD22 Flooding Control Station Kit. Detection.
! KD23 Wireless Basic Control Station (RF) Kit. Measurements and Control

! KD24 Position Switch Kit. ! KE2 Kit of Reactive Energy Control and Compensation.

! KD25A Kit of Control Station for Domestic Electric Services ! KE6 Energy Counters Control Station Kit.
through the Telephone.
! KE8 Kit of Power & Torque Measurements of Electrical
! KD28A Kit of Integral Control Station of Domestic Electric Motors.
Systems.
Lines
! KD30 Gas Control Station Kit.
! KE1 Aerial Line Model Kit.
Sound
Software
! KD19A Sound Station Kit.
- CAI Computer Aided Instruction Software System,
additional and optional to the Kits type “K”.
! KD31 Movement and Sound Detection and Control Kit.

Instruments
- CAL Computer Aided Learning Software (Results
Calculation and Analysis), additional and optional to the
Kits type “K”.
! KD8 Blinds Activator Kit.
Data Acquisition
! KD11A Network Analyzer Kit.
- MUAD Electric Power Data Acquisition System, for being
! KD32 24 Vac/12 Vdc Circuits Analyzer Kit. used with the Kits type “K”.

! KD33 Installations Faults Simulator Kit. - EIV2 Home Automation Installations Trainer.

Industrial Electrical Installations - EIV6 Home Automation Installations Trainer.

Starters and Motors

! KI1 Star-Delta Starter Kit.

4.2.- Electricity Demonstration
! KI2 Starter through Auto-Transformer Kit.
- PDL Lamps Demonstration Panel.
! KI4 Starter-Inverter Kit.
- PDCE-P Electric Cables Demonstration Panel (Power).
! KI5 AC Wound Rotor Motor Starter Kit.
- PDCE-S Electric Cables Demonstration Panel (Signalling).
! KI6 DC Motor Starter Kit. - PDF Fuses Demonstration Panel.
Speed Control

! KI3 Speed Commutator for Dahlander Motor Kit.

4.3.- Electrical Installations Workshop
! KI7 Kit of Automatic Change of Speed of a Dahlander
Motor with Change of Direction. - EIWS Including furniture, tools, components, etc.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:7/20
Units
4.4.- Electrical Machines Transformers
- LIMEL Integrated Laboratory for Electrical Machines: -ETT Three-phase and Single-phase Transformers Unit.
Electrical Machines Units
-TPPT Three- phase Power Transformer Unit.
-EME Electrical Machines Unit. (Advanced option).
-EME/M Electrical Machines Unit. (Intermediate option). -EMPTA Auxiliary Transformer and Protection Module.
-EME/B Electrical Machines Unit. (Basic option). -AUTR Variable Auto-transformer.
Measurement Units
-Individual elements:
-MULT Digital Multimeter.
-EAL Network Analyzer Unit. -TRANS Single-phase transformer.
-EALD Network Analyzer Unit, with Computer Data -TRANS/3Three-phase transformer.
Acquisition + Oscilloscope (PC).
DC Motor Speed Control
-EALDG Network Analyzer Unit, with Computer Data
Acquisition+Oscilloscope (PC)+Oscilloscope Display. -VVCC DC Motor Speed Controller.
-EAM-VA Analog Measurement Unit.
-VVCC/M DC Motor Speed Controller (intermediate option).
-MUAD Electric Power Data Acquisition System.
Loads -VVCC/B DC Motor Speed Controller, with no other elements.
-RCL3R Resistive, Inductive and Capacitive Loads Module. AC Motor Speed Control
-Individual elements:
-VVCA AC Motor Speed Controller.
-IND Inductance with protection box.
-CON Condensers with protection box. -VVCA/M AC Motor Speed Controller (intermediate option).
-REV Variable Resistance with protection box. -VVCA/B AC Motor Speed Controller, with no other elements.
-REF Fixed Resistance with protection box. PLC (Programmable Logic Controller)
-REV/T Three-phase variable resistance with
protection box. -PLC-PI PLC Module for Unit Operations Control.
Motors -EDIBON FP-X-CPU PLC, with no other elements.
Motors (DC)
Tachogenerator
-EMT1 D.C. Independent excitation motor-generator.
-EMT2 D.C. Series excitation motor-generator. -TECNEL/T Tachogenerator.
-EMT3 D.C. Shunt excitation motor-generator. Software
-EMT4 D.C. Compound excitation motor-generator.
- CAI Computer Aided Instruction Software System.
-EMT5 D.C. Shunt-series compound excitation motor.
-EMT12 Universal motor (single-phase). - CAL Computer Aided Learning Software (Results
Calculation and Analysis).
-EMT15 D.C. Permanent magnet motor.
-EMT18 D.C. Brushless motor. Data Acquisition

-EMT19 Stepper motor. - MUAD Electric Power Data Acquisition System.

Motors (AC)
-EMT6 A.C. Synchronous Three-phase motor alternator.
-EMT7 Asynchronous Three-phase motor of squirrel cage. - EMT-E Motors (available 21 different type of motors).
-EMT7-B Asynchronous Three-phase motor of squirrel cage (4 - EMT-S Cut Away Motors (available 21 different type of motors).
poles).
- ESAM Faults Simulation Trainer in Electrical Motors.
-EMT8 Asynchronous Three-phase motor with wound rotor.
-EMT9 Dahlander Three-phase (two-speeds). - ESAE Electrical Faults Simulation Trainer.
-EMT10 Asynchronouts Three-phase motor of two independent - EEA Alternators Study Unit.
speeds.
-EMT11 Asynchronous Single-phase motor with starting - EGMG24 Motor-Generator Group, three-phase 24 Vac, no
capacitor. excitation required (permanent magnets).
-EMT12 Universal motor (single-phase). - ERP Protection Relays Test:
-EMT14 Repulsion motor, single-phase with short-circuited
brushes. ! ERP-UB Protection Relays Test Unit (common for the relays
modules type "ERP").
-EMT16 Asynchronous Single-phase motor with starting
and running capacitor. Relays Modules
-EMT17 Three-phase motor of squirel cage with “Y” ! ERP-SFT Overcurrent and Earth Fault Protection Relay
connection. Module.
-EMT20 Asynchronous Single-phase motor with split phase.
! ERP-SDND Directional/Non Directional Overcurrent
-EMT21 Three-phase Reluctance motor. Protection Relay Module.
-EMT22 Single-phase Shaded Pole motor.
! ERP-PDF Differential Protection Relay Module.
Brakes
-FRE-FE Electronic Brake. ! ERP-MA Feeders Management Relay Module.
-DI-FRE Pendular Dynamo Brake. ! ERP-PD Distance Protection Relay Module.
-EMCC Load Cell Module.
-FREND Dynamo Brake.
-FRENP Magnetic Powder Brake. 4.5.- Electrical Machines Kits
-FREPR Prony Brake.
- EMT-KIT Disassembly Machines Kit.
-FRECP Eddy Current Brake.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:8/20
Units
Bio
5.- Energy
- EBDC Computer Controlled Biodiesel Process Unit. (It uses
5.1.- Energy Simulation SCADA System)

- EBDB Biodiesel Process Unit.

5.2.- Energy Power Plants (It uses SCADA System) - EBEC Computer Controlled Bioethanol Process Unit. (It uses
SCADA System)
- APS12 Advanced Electrical Power System and Mechanical - EBEB Bioethanol Process Unit.
Power Plants Simulator (Generation, Transformation,
Transport, Distribution and Consumption). - EBGC Computer Controlled Biogas Process Unit. (It uses SCADA
(12 different Power Plants can be simulated). System)

- MPSS Modular Power System Simulator. - EBGB Biogas Process Unit.

- MPSSC Modular Power System Simulator with SCADA Control - EBMC Computer Controlled Biomass Process Unit. (It uses SCADA
System. System)

- EBMB Biomass Process Unit.

Sea
5.3.- Renewable (Alternative) Energies
- EOMC Computer Controlled Waves Energy Unit. (It uses SCADA
Photovoltaic System)
- EESFC Computer Controlled Photovoltaic Solar Energy Unit. (It - EOMB Waves Energy Unit.
uses SCADA System)

- EESFB Photovoltaic Solar Energy Unit. - EMMC Computer Controlled Tidal Energy Unit. (It uses SCADA
System)
- MINI-EESF Photovoltaic Solar Energy Modular Trainer. - EMMB Tidal Energy Unit.
- EF5C Computer Controlled Photovoltaic Solar Energy - ECMC Computer Controlled Submarine Currents Energy Unit.
Concentrator Unit. (It uses SCADA System) (It uses SCADA System)

- EF5B Photovoltaic Solar Energy Concentrator Unit. - ECMB Submarine Currents Energy Unit.
Solar Thermal - ETMC Computer Controlled Ocean Thermal Energy Unit. (It
uses SCADA System)
- EESTC Computer Controlled Thermal Solar Energy Unit. (It uses
SCADA System) - ETMB Ocean Thermal Energy Unit.
- EEST Thermal Solar Energy Unit. Geothermal
- MINI-EESTC Computer Controlled Thermal Solar Energy Basic Unit. - EG5C Computer Controlled Geothermal (low enthalpy)
(It uses SCADA System)
Energy Unit. (It uses SCADA System)
- MINI-EEST Thermal Solar Energy Basic Unit.
- EG5B Geothermal (low enthalpy) Energy Unit.
- ET5C Computer Controlled Thermal Solar Energy Concentrator
Unit. (It uses SCADA System) - EG6C Computer Controlled Geothermal (high enthalpy)
Energy Unit. (It uses SCADA System)
- ET5B Thermal Solar Energy Concentrator Unit.
- EG6B Geothermal (high enthalpy) Energy Unit.
Wind
Hidro
- EEEC Computer Controlled Wind Energy Unit. (It uses SCADA
System) - SCE Computer Controlled Generating Stations Control and
Regulation Simulator. (It uses SCADA System)
- EEE Wind Energy Unit.
Organic
- MINI-EEEC Computer Controlled Wind Energy Basic Unit. (It uses
SCADA System) - TORC Computer Controlled Organic Rankine Cycle Unit. (It
uses SCADA System)
- MINI-EEE Wind Energy Basic Unit.

- EFTEC Computer Controlled Turbine Electric Hub Troubleshooting

Learning System. (It uses SCADA System) 5.4.- Relays Units
- EFTNC Computer Controlled Turbine Nacelle Troubleshooting
Learning System. (It uses SCADA System) - ERP Protection Relays Test:

Fuel Cells ! ERP-UB Protection Relays Test Unit (common for the relays
modules type "ERP").
- EC5C Computer Controlled PEM Fuel Cell Unit (22 Watt). (It uses
SCADA System) Relays Modules

- EC5B PEM Fuel Cell Unit (22 Watt). ! ERP-SFT Overcurrent and Earth Fault Protection
Relay Module.
- EC6C Computer Controlled PEM Fuel Cell Advanced Unit (1.5
kW). (It uses SCADA System) ! ERP-SDND Directional/Non Directional Overcurrent
Protection Relay Module.
- EC6B PEM Fuel Cell Advanced Unit (1.5 kW).
! ERP-PDF Differential Protection Relay Module.
- EA5C Computer Controlled Alkaline Fuel Cell Unit. (It uses SCADA
System) ! ERP-MA Feeders Management Relay Module.
- EA5B Alkaline Fuel Cell Unit. ! ERP-PD Distance Protection Relay Module.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:9/20
Units
Electrical Machines Control (Motors)
6.- Automation & Systems
! PLCE-M Motor Control.
6.1.- Automation (PLC Process Emulation) ! PLCE-MPP Stepper Motor Control.
- PLCE PLC Trainer. ! PLCE-MET Star-Delta Connection.
PLC Process Emulators for working with PLCE:
! PLCE-MCETI Reversing Star-Delta Connection.
Traffic and Parking
! PLCE-MD Dahlander Motor Circuit.
! PLCE-CST Traffic Signal Control.
! PLCE-M2BS Motor with 2 Separate Windings.
! PLCE-AV Car Parking.
! PLCE-AG2Z Two Zones Parking Garage. ! PLCE-MAC Starting a Wound-Rotor Motor.
Small Industrial Machines Alarms/Current
! PLCE-CA Elevator Control. ! PLCE-AN Annunciator.
! PLCE-CLA Automatic Washing Machine Control. ! PLCE-SLU Running Lights.
! PLCE-MB Drinks Machine. ! PLCE-CPR Reactive Current Compensation.
! PLCE-MBC Hot Drinks Machine. ! PLCE-MCI Reversing Contactor.
! PLCE-CB Pump Control.
! PLCE-MA Embossing Machine.
6.2.- Automation (PLC Small Scale Real
Small Industrial Systems
Applications)
! PLCE-ST Drilling System.
- PLCE PLC Trainer.
! PLCE-SBAR Dirty-Water Pump System.
PLC Small Scale Real Applications for working with PLCE:
! PLCE-SBP Pump System (Pressure).
Sensors
! PLCE-SL Cleaning System.
! PLCE-SALL Automatic Filling System.
! PLCE-BS1 Vibration and/or Deformation Test Module.

! PLCE-SBT Conveyor Belts System. ! PLCE-BS2 Temperature Test Module

! PLCE-SCCT Conveyor Charging System. ! PLCE-BS3 Pressure Test Module.
! PLCE-SCA Canalization System. ! PLCE-BS4 Flow Test Module.
! PLCE-SDT Pipe Bending System. ! PLCE-BS5 Ovens Test Module.
! PLCE-PAE Automatic Stamping Press. ! PLCE-BS6 Liquid Level Test Module.
Big Industrial Systems ! PLCE-BS7 Tachometers Test Module.
! PLCE-PLLT Filling Process of Tanks. ! PLCE-BS8 Proximity Test Module.
! PLCE-SCC Collecting Belt Conveyor. ! PLCE-BS9 Pneumatic Test Module.
! PLCE-MCC Mails Allocation Machine. ! PLCE-BS10 Light Test Module.
! PLCE-RAC Compressed Air Network.
! PLCE-TC Coal Treatment.
! PLCE-PELE Packing Line and Bottling Plant.
6.3.- Automation (Industrial PLC Applications)
Simple Control Applications - PLC-IN PLC Industrial Control System.
! PLCE-CA2P Two-Doors Access Control.
! PLCE-CI Fire Control. 6.4.- Automation (PLC Unit Operations Control)
! PLCE-CP Proximity Control (security).
- PLC-PI PLC Module for Unit Operations Control (for working with
! PLCE-CCO Sluice Gate Control. EDIBON Computer Controlled Units).
! PLCE-CNC Level and Flow Control. - EDIBON FP-X-CPU PLC, with no additional elements.
! PLCE-CNTA Water Tower Level Control.
! PLCE-CF Photo Control. .
6.5.- Automation (Regulation and Control) (It uses RTC
! PLCE-CMM Molding Machine Control. System)
! PLCE-CPOS Position Control. - RYC Computer Controlled Teaching Unit for the Study of
! PLCE-CS Silo Control. Regulation and Control.
! PLCE-CACV Vehicle Feeding & Loading Control. - RYC/SOF Regulation and Control Simulation Software Package.
Industrial Control Applications
! PLCE-ACC Feeding and Loading Control. 6.6.- Automation (Control)
! PLCE-CML Liquids Blending Control.
- CECI Industrial Controllers Trainer.
! PLCE-CME Mixer Control.
- CRCI Industrial Controllers Networking.
! PLCE-CR Reactor Control.
- CEAB Trainer for Field Bus Application.
! PLCE-CCP Count and Position Control.
- CEAC Controller Tuning Trainer.
! PLCE-CL Rolling Mill Control.
! PLCE-CTRA WorkCell Application. - EPID-T Industrial Regulation Trainer, PID type (Temperature).
! PLCE-CTI Tower Lighting Control.
Thermal Applications 6.7.- Systems
! PLCE-AC Buffer Storage. - SCE Computer Controlled Generating Stations Control and
! PLCE-RT Temperature Regulation. Regulation Simulator. (It uses SCADA System)
! PLCE-CSC Heating System Control. - SBB Ball and Beam System.
! PLCE-CSV Ventilation System Control. - CPVM DC Motor Position and Speed Control.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:10/20
Units
7.- Mechanics & Materials 7.4.- Special Mechanics & Foundry
7.1.- Basic Mechanics (It uses CAI and/or CAL System) - MCAM Bell Casting Basic Training Set.
- LIMEBA Basic Mechanics Integrated Laboratory: - MCLA Foundry Building-up Training Set 1.
Modules - MCEN Centrifugal Casting Building-up Training Set 2.
! MECA1 Statics Experiments.
! MECA2 Load Elevation Mechanisms Experiments. 7.5.- Strength of Materials
! MECA3 Transmissions Experiments. 7.5.1.- General Strength Of Materials
! MECA4 Dynamics Experiments. - EEFC Computer Controlled Fatigue Testing Unit. (It uses
! MECA5 Friction Experiments. SCADA System)

! MECA6 Special Mechanisms Experiments. - EEF Fatigue Testing Unit.

Software - EEU/20KNUniversal Material Testing Unit.
- CAI Computer Aided Instruction Software System, - EEFCR Creep Testing Unit.
additional and optional to the Modules type “MECA”. - EEICI Charpy and Izod Impact Testing Unit.
- LIMEBA/CAL Computer Aided Learning Software System (Results - EEDB Brinell Hardness Testing Unit.
Calculation and Analysis), additional and optional to the
Modules type “MECA”. - MVV Unsymmetrical Cantilever Unit .
- MUP Loading of Struts Unit.
7.2.- General Mechanics - MTP Twist & Bend Machine.
7.2.1.- Automotive Mechanisms - MFV Beam Deflection Unit.
- MFT Drum Brake System. - MTB Torsion Unit.
- MEM Plate Clutch. - MFLT Strut Unit.
- MFD Disk Brake. - MVS Suspension Bridge Unit.
- MCC Gearbox. - MFL Two Pinned Arch Unit.
- MDC Differential-Crownwheel and Pinion. - MPO Portal Frame Unit.
- MFF Braking and Accelerating Forces Unit. - MDB Deflection of Curved Bars Unit.
- MGE Gear Generation Unit. - MMF Shear Force and Bending Momentum Unit.
- MVL Free Vibration Unit.
7.2.2.- Gears and Transmissions - MVLF Free & Forced Vibration Unit.
- MEC Overdrive Unit. - MOT Torsional Oscillations Unit.
- MEE Geared Lifting Machine. - MAE Acceleration of Geared Systems Unit.
- MBW Borg-Warner Automatic Transmission. - MES Simple Balancing Unit.
- MED Static & Dynamic Balancing Unit. - MBU Universal Bench Mounted Frame.
- MTE1 Epicyclic Gear Unit (1 element). - MCG Strain Gauge Calibration Unit.
- MTE2 Epicyclic Gear Unit (2 elements). - MCD Thin Cylinder Unit.
- MTE3 Epicyclic Gear Unit (3 elements).
7.5.2.- Strength of Materials (Photoelasticity)
7.2.3.- Mechanisms (It uses PHOTOELASTICITY System)

- MSH Simple Hydraulic System. - EFO Photoelasticity Unit.

- MBD Slider Crank Mechanism. - EFOC Photoelasticity Unit with Strain Gauges Measurement
System (quality and quantity measurement in some points).
- MYE Scotch Yoke Mechanism.
- EFOV Photoelasticity Unit with Artificial Vision System
- MBM1 Slotted Link Mechanism. (quality and quantity measurement in any point).
- MBM2 Whitworth Quick Return Mechanism.
- MCA Chain Mechanism.
7.6.- Basic Cut Away Mechanics
- MME Geneva Stop Mechanism.
- MAC Coupling Mechanism.
- MUN Hook’s Joint Mechanism. 7.7.- General Cut Away Mechanics
- MEX Cam and Follower Mechanism.
- MUV Constant Velocity Joint Mechanism. 7.8.- Building (It uses SCADA System)
- MBI Crank Mechanism. - TIAC Computer Controlled Acoustic Impedance Tube/Acoustic
Insulation Test Unit.
7.2.4.- Lubrication. Wear. Friction - TDRC Computer Controlled Noise Control Demonstration Unit.
- MCF Belt Friction Unit. - TEVC Computer Controlled Ventilation Trainer.
- MEF Friction Study Unit. - TCMC Computer Controlled Thermal Conductivity of Building and
Insulating Materials Unit.

7.3.- Automotive
7.9.- Civil Engineering
7.3.1.- Sensors and Basic Electricity of Automobile
7.3.2.- Electricity and Electronics of Automobile
7.3.3.- Motors 7.10.-Agricultural Engineering
7.3.4.- Injection Systems
7.3.5.- General Automotive Mechanics 7.11.-Other Engineerings

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:11/20
Units
8.- Fluid Mechanics & Aerodynamics 8.2.- Fluid Mechanics (General)
8.1.- Fluid Mechanics (Basic) (It uses CAI and/or CAL and/or BDAS - BHI Hydrostatics Bench & Fluid Properties.
System)
- LFA Laminar Flow Visualization and Analysis Unit.
- LIFLUBA Basic Fluids Mechanics Integrated Laboratory:
- AFTC Computer Controlled Fluid Friction in Pipes, with
Base Service Units Hydraulics Bench (FME00). (It uses SCADA System)
! FME00 Hydraulics Bench. - AFT Fluid Friction in Pipes, with Hydraulics Bench (FME00).
! FME00/B Basic Hydraulic Feed System. - AFT/B Fluid Friction in Pipes, with Basic Hydraulic Feed System
Modules (FME00/B).
General concepts - AFT/P Fluid Friction in Pipes.
! FME01 Impact of a Jet. - AFT/CAL Computer Aided Learning Software (Results, Calculation
and Analysis), additional and optional to the units type “AFT”.
! FME02 Flow over Weirs.
- AMTC Computer Controlled Pipe Network Unit, with Hydraulics
! FME04 Orifice Discharge.
Bench (FME00). (It uses SCADA System)
! FME14 Free and Forced Vortices.
- AMT Pipe Network Unit, with Hydraulics Bench (FME00).
! FME08 Hydrostatic Pressure.
- AMT/B Pipe Network Unit, without Hydraulics Bench (FME00).
! FME10 Dead Weight Calibrator.
- EGAC Computer Controlled Water Hammer Unit. (It uses SCADA System)
! FME11 Metacentric Height.
- HMM Manometers & Multimanometers:
! FME26 Depression Measurement System (vacuum gauge).
- HMM-W500 U-shape Double Manometer.
! FME32 Pitot Static Tube Module.
Laws - HMM-U1000 U-shape Manometer.

! FME03 Bernoulli’s Theorem Demonstration. - HMM-I1000 Inclined Multimanometer with 20

manometric tubes of 250 mm. length.
! FME22 Venturi, Bernoulli and Cavitation Unit.
- HMM-V500 Multimanometer with 8 manometric
! FME06 Osborne-Reynolds’ Demonstration. tubes of 500 mm. length, vertical
! FME31 Horizontal Osborne-Reynolds Demonstration. position.

! FME24 Unit for the study of Porous Beds in Venturi Tubes - HMM-V500-12 Multimanometer with 12 manometric
(Darcy’s Equation). tubes of 500 mm. length, vertical
position.
Demonstration
- HMM-4B 4 Bourdon type Manometers Unit.
! FME09 Flow Visualization in Channels.
- HCMP Precision Pressure Gauge Calibrator.
! FME20 Laminar Flow Demonstration.
- HVB Falling Sphere Viscosimeter and Drag Coefficient.
! FME30 Vortex Flow Meter.
! FME15 Water Hammer. - UVF Hydrogen Bubble Flow Visualisation Unit.

! FME19 Cavitation Phenomenon Demonstration. - FMDU Flow Meters Demonstration Unit.

! FME25 Flow Channel, 1m. length. - HECA Air Flow Studies Unit.
! FME18 Flow Meter Demonstration. - HSMAP Air Pressure Maintained Water System Trainer.
! FME17 Orifice and Free Jet Flow.
Pipes
8.3.- Fluid Mechanics (Flow Channels)
! FME05 Energy Losses in Bends.
- CFC Computer Controlled Flow Channels (section: 80 x 300 mm).
! FME07 Energy Losses in Pipes. (They use SCADA System)

! FME23 Basic Pipe Network Unit. Available length:

Hydraulic Machines 2.5 / 5 / 7.5 and 10 m.
! FME12 Series/Parallel Pumps. - CF Flow Channels (section: 80 x 300 mm).
! FME13 Centrifugal Pumps Characteristics. Available length:
! FME27 Axial Flow Turbine. 2.5 / 5 / 7.5 and 10 m.
! FME16 Pelton Turbine. - CFGC Computer Controlled Flow Channels (section: 300 x
! FME28 Francis Turbine. 450 mm). (They use SCADA System)
Available length:
! FME29 Kaplan Turbine.
5 / 7.5 / 10 / 12.5 and 15 m.
! FME21 Radial Flow Turbine.
Software On request: Any other dimensions.

- CAI Computer Aided Instruction Software System, - CFG Flow Channels (section:300 x 450 mm).
additional and optional to the Modules type “FME”. Available length:
- FME/CAL Computer Aided Learning Software (Results, 5 / 7.5 / 10 / 12.5 and 15 m.
Calculation and Analysis), additional and optional to the
Modules type “FME”. On request: Any other dimensions.
Data Acquisition - CAS Sediment Transport Demonstration Channel.
- BDAS Basic Data Acquisition System and sensors, for being - HVFLM Mobile Bed and Flow Visualisation Unit.
used with the Modules type “FME”.
www.edibon.com Issue: HPI0111
Date: January/2011
 Products List Page:12/20
Units
8.4.- Hydraulic Machines (Pumps) 9.- Thermodynamics & Thermotechnics
- PBOC Computer Controlled Multipump Testing Bench. (It uses SCADA 9.1.- Refrigeration
System)
Basic Refrigeration
- PBCC Computer Controlled Centrifugal Pump Bench. (It uses SCADA - TCRC Computer Controlled Refrigeration Cycle Demonstration
System)
Unit. (It uses SCADA System)
- PBCB Centrifugal Pump Bench. - TCRB Refrigeration Cycle Demonstration Unit.
- TRAC Computer Controlled Absorption Refrigeration Unit. (It
- PBSPC Computer Controlled Series/Parallel Pumps Bench. (It uses uses SCADA System)
SCADA System)
- TRD2PC Two Doors Domestic Refrigeration System Trainer.
- PBSPB Series/Parallel Pumps Bench. - TRCVC Computer Controlled Vapour-Compresion Refrigeration
Unit. (It uses SCADA System)
- PBEC Computer Controlled Gear Pump Bench. (It uses SCADA System)

- PBAC Computer Controlled Axial Pump Bench. (It uses SCADA System) General Refrigeration
- THIBAR22C Computer Controlled Heat Pump + Air Conditioning +
- PBRC Computer Controlled Piston Pump Bench.(It uses SCADA System) Refrigeration Unit, with Cycle Inversion Valve (two
condensers (water and air) and two evaporators (water and
air)). (It uses SCADA System)
- THIBAR22B Heat Pump + Air Conditioning + Refrigeration Unit, with
8.5.- Hydraulic Machines (Fans and Compressors) Cycle Inversion Valve (two condensers (water and air) and
two evaporators (water and air)).
- HVCC Computer Controlled Centrifugal Fan Teaching Trainer. (It uses - THAR22C Computer Controlled Refrigeration and Air Conditioning
SCADA System) Unit (two condensers (water and air) and two evaporators
(water and air)). (It uses SCADA System)
- HVCB Centrifugal Fan Teaching Trainer.
- THAR22B Refrigeration and Air Conditioning Unit (two condensers
- HVAC Computer Controlled Axial Fan Teaching Trainer. (It uses SCADA (water and air) and two evaporators (water and air)).
System) - THAR2LC Computer Controlled Refrigeration and Air Conditioning
Unit (two condensers (water and air) and one evaporator
- HVAB Axial Fan Teaching Trainer. (water)). (It uses SCADA System)

- HCCC Computer Controlled Centrifugal Compressor Demonstration - THAR2LB Refrigeration and Air Conditioning Unit (two condensers
Unit. (It uses SCADA System) (water and air) and one evaporator (water)).
- THARL2C Computer Controlled Refrigeration and Air Conditioning
Unit (one condenser (water) and two evaporators (water and
air)). (It uses SCADA System)
8.6.- Hydraulic Machines (Turbines) (It uses SCADA System) - THARL2B Refrigeration and Air Conditioning Unit (one condenser
(water) and two evaporators (water and air)).
- TFRC Computer Controlled Radial Flow Turbine. - THARA2C Computer Controlled Refrigeration and Air Conditioning
Unit (one condenser (air) and two evaporators (water and air)).
- TPC Computer Controlled Pelton Turbine. (It uses SCADA System)
- THARA2B Refrigeration and Air Conditioning Unit (one condenser
- TFAC Computer Controlled Axial Flow Turbine. (air) and two evaporators (water and air)).
- THARLLC Computer Controlled Refrigeration and Air Conditioning
- TFC Computer Controlled Francis Turbine. Unit (one condenser (water) and one evaporator (water)). (It uses
SCADA System)
- TKC Computer Controlled Kaplan Turbine.
- THARLLB Refrigeration and Air Conditioning Unit (one condenser
(water) and one evaporator (water)).
- HTRC Computer Controlled Experimental Reaction Turbine.
- THARALC Computer Controlled Refrigeration and Air Conditioning
- HTIC Computer Controlled Experimental Impulse Turbine. Unit (one condenser (air) and one evaporator (water)). (It uses
SCADA System)
Note: See other Turbines in section “9.14. Thermal Turbines” (page 15 ) - THARALB Refrigeration and Air Conditioning Unit (one condenser
(air) and one evaporator (water)).
- THARA2C/1 Computer Controlled Capacity Control Methods in
Refrigeration. (It uses SCADA System)
8.7.- Aerodynamics (Basic) - THARA2C/2 Computer Controlled Double Chamber Refrigerator
Module. (It uses SCADA System)
- TA50/250C Computer Controlled Aerodynamic Tunnel, 50 x 250 mm.
(It uses SCADA System) - THALAC/1 Computer Controlled Multiple Compressor Refrigeration
Control. (It uses SCADA System)
- TA50/250 Aerodynamic Tunnel, 50 x 250 mm. - TCPISC Computer Controlled Cooling Plant with Ice Store. (It uses
SCADA System)

Special Refrigeration
8.8.- Aerodynamics (General) (It uses SCADA System)
- TPVC Computer Controlled Vortex Tube Refrigerator Unit. (It uses
SCADA System)
- TA1200/1200 Computer Controlled Aerodynamic Tunnel, 1200 x
1200 mm. - TPCC Computer Controlled Contact Plate Freezer. (It uses SCADA
System)

- TA500/500 Computer Controlled Water Tunnel, 500 x 500 mm. - TEVC Computer Controlled Ventilation Trainer. (It uses SCADA System)

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:13/20
Units
9.3.- Heating 9.5.- Air Conditioning
- EACC Computer Controlled Hot Water Production and Heating General Air Conditioning
Teaching Unit. (It uses SCADA System)
- TAAC Computer Controlled Air Conditioning Laboratory Unit.
(It uses SCADA System)

9.4.- Heat Pumps - TAAB Air Conditioning Laboratory Unit.

General Heat Pumps - TARC Computer Controlled Recirculating Air Conditioning Unit.
(It uses SCADA System)
- THIBAR22C Computer Controlled Heat Pump + Air Conditioning +
Refrigeration Unit, with Cycle Inversion Valve (two - TARB Recirculating Air Conditioning Unit.
condensers (water and air) and two evaporators (water and - TAAUC Computer Controlled Automobile Air Conditioning
air)). (It uses SCADA System) Trainer. (It uses SCADA System)
- THIBAR22B Heat Pump + Air Conditioning + Refrigeration Unit, with - TAAU Automobile Air Conditioning Trainer.
Cycle Inversion Valve (two condensers (water and air) and
two evaporators (water and air)). Applied Air Conditioning
- THIBAR44C Computer Controlled Heat Pump + Air Conditioning + - THIBAR22C Computer Controlled Heat Pump + Air Conditioning +
Refrigeration Unit, with Cycle Inversion Valve (four Refrigeration Unit, with Cycle Inversion Valve (two
condensers (two of water and two of air) and four evaporators condensers (water and air) and two evaporators (water and
(two of water and two of air)). (It uses SCADA System) air)). (It uses SCADA System)
- THIBAR44B Heat Pump + Air Conditioning + Refrigeration Unit, with - THIBAR22B Heat Pump + Air Conditioning + Refrigeration Unit, with
Cycle Inversion Valve (four condensers (two of water and two Cycle Inversion Valve (two condensers (water and air) and
of air) and four evaporators (two of water and two of air)). two evaporators (water and air)).
- THB22C Computer Controlled Heat Pump Unit (two condensers - THAAAC Computer Controlled Air Conditioning Unit (one
(water and air) and two evaporators (water and air)). (It uses condenser (air) and one evaporator (air)). (It uses SCADA
SCADA System) System)
- THB22B Heat Pump Unit (two condensers (water and air) and two - THAAAB Air Conditioning Unit (one condenser (air) and one
evaporators (water and air)). evaporator (air)).
- THB2LC Computer Controlled Heat Pump Unit (two condensers
(water and air) and one evaporator (water)). (It uses SCADA - THALAC Computer Controlled Air Conditioning Unit (one
System) condenser (water) and one evaporator (air)). (It uses SCADA
System)
- THB2LB Heat Pump Unit (two condensers (water and air) and one
evaporator (water)). - THALAB Air Conditioning Unit (one condenser (water) and one
evaporator (air)).
- THBL2C Computer Controlled Heat Pump Unit (one condenser
(water) and two evaporators (water and air)). (It uses SCADA - THA2AC Computer Controlled Air Conditioning Unit (two
System) condensers (water and air) and one evaporator (air)). (It
uses SCADA System)
- THBL2B Heat Pump Unit (one condenser (water) and two
evaporators (water and air)). - THA2AB Air Conditioning Unit (two condensers (water and air)
and one evaporator (air)).
- THBA2C Computer Controlled Heat Pump Unit (one condenser
(air) and two evaporators (water and air)). (It uses SCADA
System)
- THAR22C Computer Controlled Refrigeration and Air Conditioning
- THBA2B Heat Pump Unit (one condenser (air) and two Unit (two condensers (water and air) and two evaporators
evaporators (water and air)). (water and air)). (It uses SCADA System)
- THBLLC Computer Controlled Heat Pump Unit (one condenser - THAR22B Refrigeration and Air Conditioning Unit (two condensers
(water) and one evaporator (water)). (It uses SCADA System) (water and air) and two evaporators (water and air)).
- THBLLB Heat Pump Unit (one condenser (water) and one - THAR2LC Computer Controlled Refrigeration and Air Conditioning
evaporator (water)). Unit (two condensers (water and air) and one evaporator
- THBALC Computer Controlled Heat Pump Unit (one condenser (water)). (It uses SCADA System)
(air) and one evaporator (water)). (It uses SCADA System)
- THAR2LB Refrigeration and Air Conditioning Unit (two condensers
- THBALB Heat Pump Unit (one condenser (air) and one (water and air) and one evaporator (water)).
evaporator (water)).
- THARL2C Computer Controlled Refrigeration and Air Conditioning
- THB2AC Computer Controlled Heat Pump Unit (two condensers Unit (one condenser (water) and two evaporators (water and
(water and air) and one evaporator (air)). (It uses SCADA air)). (It uses SCADA System)
System)
- THARL2B Refrigeration and Air Conditioning Unit (one condenser
- THB2AB Heat Pump Unit (two condensers (water and air) and one (water) and two evaporators (water and air)).
evaporator (air)).
- THARA2C Computer Controlled Refrigeration and Air Conditioning
- THBLAC Computer Controlled Heat Pump Unit (one condenser
Unit (one condenser (air) and two evaporators (water and air)).
(water)and one evaporator (air)). (It uses SCADA System) (It uses SCADA System)
- THBLAB Heat Pump Unit (one condenser (water) and one - THARA2B Refrigeration and Air Conditioning Unit (one condenser
evaporator (air)). (air)and two evaporators (water and air)).
- THBAAC Computer Controlled Heat Pump Unit (one condenser
(air) and one evaporator (air)). (It uses SCADA System) - THARLLC Computer Controlled Refrigeration and Air Conditioning
Unit (one condenser (water) and one evaporator (water)). (It
- THBAAB Heat Pump Unit (one condenser (air) and one uses SCADA System)
evaporator (air)).
- THARLLB Refrigeration and Air Conditioning Unit (one condenser
(water) and one evaporator (water)).
Special Heat Pumps - THARALC Computer Controlled Refrigeration and Air Conditioning
- TBTC Computer Controlled Thermo-Electric Heat Pump. (It uses Unit (one condenser (air) and one evaporator (water)). (It uses
SCADA System) SCADA System)

- TBCF Bomb Calorimeter Set for Testing Calorific Value of - THARALB Refrigeration and Air Conditioning Unit (one condenser
Fuels. (air) and one evaporator (water)).

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:14/20
Units
9.6.- Cooling Towers 9.8.- Heat Transfer (Basic)

- TTEC Computer Controlled Bench Top Cooling Tower. (It uses SCADA - TSTCC Computer Controlled Heat Transfer Series: (It uses SCADA
System) System)

! TSTCC/CIB Control Interface for Heat Transfer Series.

- TTEB Bench Top Cooling Tower. (Common for modules type "TXT”).

Modules
(computer controlled)

! TXC/CL Linear Heat Conduction Module.

9.7.- Heat Exchange
! TXC/CR Radial Heat Conduction Module.
- TICC Computer Controlled Heat Exchangers Training System: (It
uses SCADA System) ! TXC/RC Radiation Heat Conduction Module.

! TIUS Base Service Unit. (Common for the Heat Exchangers ! TXC/CC Combined Free and Forced Convection and
type "TI"). Radiation Module.

Heat Exchangers ! TXC/SE Extended Surface Heat Transfer Module.

(computer controlled)
! TXC/ER Radiation Errors in Temperature Measurement
Module.
! TITC Concentric Tube Heat Exchanger.
! TXC/EI Unsteady State Heat Transfer Module.
! TITCA Extended Concentric Tube Heat Exchanger.
! TXC/LG Thermal Conductivity of Liquids and Gases
Module.
! TIPL Plate Heat Exchanger.
! TXC/FF Free and Forced Convection Heat Transfer
! TIPLA Extended Plate Heat Exchanger. Module.

! TXC/TE 3 Axis Heat Transfer Module.

! TICT Shell & Tube Heat Exchanger.
! TXC/MM Metal to Metal Heat Transfer Module.
! TIVE Jacketed Vessel Heat Exchanger.
! TXC/TC Ceramic Heat Transfer Module.
! TIVS Coil Vessel Heat Exchanger.
! TXC/TI Isolated Material Heat Transfer Module.
! TIFT Turbulent Flow Heat Exchanger.
- TSTCB Heat Transfer Series:

! TICF Cross Flow Heat Exchanger. Modules

! TXC/CLB Linear Heat Conduction Module.

- TICB Heat Exchangers Training System:
! TXC/CRB Radial Heat Conduction Module.
! TIUSB Base Service Unit. (Common for the Heat Exchangers
type "TI..B"). ! TXC/RCB Radiation Heat Conduction Module.

Heat Exchangers ! TXC/CCB Combined Free and Forced Convection and

Radiation Module.
! TITCB Concentric Tube Heat Exchanger.
! TXC/SEB Extended Surface Heat Transfer Module.

! TITCAB Extended Concentric Tube Heat Exchanger. ! TXC/ERB Radiation Errors in Temperature Measurement
Module.
! TIPLB Plate Heat Exchanger.
! TXC/EIB Unsteady State Heat Transfer Module.
! TIPLAB Extended Plate Heat Exchanger. ! TXC/LGB Thermal Conductivity of Liquids and Gases
Module.
! TICTB Shell & Tube Heat Exchanger.
! TXC/FFB Free and Forced Convection Heat Transfer
Module.
! TIVEB Jacketed Vessel Heat Exchanger.
! TXC/TEB 3 Axis Heat Transfer Module.
! TIVSB Coil Vessel Heat Exchanger.
! TXC/MMB Metal to Metal Heat Transfer Module.
! TIFTB Turbulent Flow Heat Exchanger.
! TXC/TCB Ceramic Heat Transfer Module.

! TICFB Cross Flow Heat Exchanger. ! TXC/TIB Isolated Material Heat Transfer Module.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:15/20
Units
9.9.- Heat Transfer (General) 9.12.-Combustion (It uses SCADA System)
- TRTC Computer Controlled Thermal Radiation and Light - TVCC Computer Controlled Combustion Laboratory Unit.
Radiation Unit. (It uses SCADA System)
- TVPLC Computer Controlled Flame Propagation and Stability Unit.
- TMT Temperature Measurement Unit.
- TMCP Pressure Measurement and Calibration Unit.
- TTLFC Computer Controlled Fluidisation and Fluid Bed Heat 9.13.-Engines Test Benches (It uses SCADA System)
Transfer Unit. (It uses SCADA System)
- TBMC3 Computer Controlled Test Bench for Single-Cylinder
- TTLFB Fluidisation and Fluid Bed Heat Transfer Unit. Engines, 2.2 kW.
- TCEC Computer Controlled Boiling Heat Transfer Unit. (It uses Available Test Engines:
SCADA System)
- TM3-1 Air-cooled single-cylinder four-stroke petrol
- TCEB Boiling Heat Transfer Unit. engine.
- TCCC Computer Controlled Heat Conduction Unit. (It uses - TM3-2 Air-cooled single-cylinder four-stroke diesel
SCADA System) engine.
- TCLGC Computer Controlled Thermal Conductivity of Liquids and - TM3-3 Air-cooled single-cylinder four-stroke petrol
Gases Unit. (It uses SCADA System) engine, with variable compression.
- TCPGC Computer Controlled Film and Dropwise Condensation
- TM3-4 Air-cooled single-cylinder two-stroke petrol
Unit. (It uses SCADA System)
engine.
- TCPGB Film and Dropwise Condensation Unit.
- TBMC8 Computer Controlled Test Bench for Single-Cylinder
- TCLFC Computer Controlled Free and Forced Convection Engines, 7.5 kW.
Heat Transfer Unit. (It uses SCADA System)
Available Test Engines:
- TIFCC Computer Controlled Cross Flow Heat Exchanger. (It uses
SCADA System) - TM8-1 Air-cooled single-cylinder four-stroke petrol
engine.
- TIFCB Cross Flow Heat Exchanger.
- TM8-2 Air-cooled single-cylinder two-stroke petrol
- TCMC Computer Controlled Thermal Conductivity of Building engine.
and Insulating Materials Unit. (It uses SCADA System)
- TM8-3 Air-cooled single-cylinder four-stroke diesel
engine.
9.10.-Heat Transfer (Special) - TM8-4 Four-stroke diesel engine, water cooled.

- TFLVC Computer Controlled Laminar/Viscous Flow Heat - TBMC12 Computer Controlled Test Bench for Single-Cylinder
Transfer Unit. (It uses SCADA System) and Two-Cylinders Engines, 11 kW.
- TFLVB Laminar/Viscous Flow Heat Transfer Unit. Available Test Engines:

- TIVAC Computer Controlled Steam to Water Heat Exchanger. - TM12-1 Water-cooled single-cylinder engine, with
(It uses SCADA System) variable compression.
- TFEC Computer Controlled Flow Boiling Demonstration Unit. - TM12-2 Two-cylinders petrol engine.
(It uses SCADA System)
- TM12-3 Two-cylinders diesel engine.
- TFEB Flow Boiling Demonstration Unit.
- TBMC75 Computer Controlled Test Bench for Four-Cylinders
- TRLC Computer Controlled Recycle Loops Unit. (It uses SCADA
System) Engines, 75 kW.

- TRLB Recycle Loops Unit. Available Test Engines:

- TSPC Computer Controlled Saturation Pressure Unit. (It uses - TM75-1 Water-cooled four-cylinders four-stroke
SCADA System) petrol engine.
- TFUC Computer Controlled Continuous and Batch Filtration - TM75-2 Water-cooled four-cylinders four-stroke
Unit. (It uses SCADA System) diesel engine.
- TFUB Continuous and Batch Filtration Unit. - TBMC-CG Computer Controlled Exhaust Gas Calorimeter.
- TEPGC Computer Controlled Expansion Processes of a Perfect - TBMC-AGE Exhaust Gas Analyzer.
Gas Unit. (It uses SCADA System)
- TMSC Computer Controlled Stirling Motor.
- TDEGC Computer Controlled Diesel Engine Electricity Generator.
9.11.-Nozzles & Steam
- TMHC Computer Controlled Test Bench for Hybrid Engine.
- TFTC Computer Controlled Nozzle Performance Test Unit. (It
uses SCADA System)

- TPT Nozzle Pressure Distribution Unit. 9.14.-Thermal Turbines (It uses SCADA System)
- TGV Steam Generator (3 kW). - TGDEC Computer Controlled Two-Shaft Gas Turbine.
- TGV-6KW Steam Generator (6 kW).
- TGDEPC Computer Controlled Two-Shaft Gas Turbine/Jet Engine.
- TGV-6KWA Steam Generator (6 kW) (for high pressures and high
temperatures) - TGFAC Computer Controlled Axial Flow Gas Turbine/Jet Engine.

- TPTVC Computer Controlled Steam Power Plant. (It uses SCADA - TTVC Computer Controlled Steam Turbine.
System)
- HTVC Computer Controlled Solar/Heat Source Vapour Turbine.
- TCESC Computer Controlled Separating & Throttling Calorimeter.
(It uses SCADA System) Note: See other Turbines in section “8.6. Hydraulic Machines (Turbines)” (page 12 )

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:16/20
Units
10.- Process Control - UCPCNCV Computer Controlled Process Control System (with
electronic control valve + pneumatic control valve
10.1.-Process Control. Fundamentals + speed controller): (It uses SCADA System)

- UCP Computer Controlled Process Control System (with

! UCPCNCV-UB Base Unit. (Common for all Sets for process
electronic control valve): (It uses SCADA System) control type "UCPCNCV").

! UCP-UB Base Unit. (Common for all Sets for process control
type “UCP”). Sets (sensor and elements + computer control software)
used in the base unit
Sets (sensor and elements + computer control software)
used in the base unit
! UCPCNCV-T Set for Temperature Process Control.
! UCP-T Set for Temperature Process Control.
! UCPCNCV-C Set for Flow Process Control.
! UCP-C Set for Flow Process Control.

! UCP-N Set for Level Process Control. ! UCPCNCV-N Set for Level Process Control.

! UCP-PA Set for Pressure Process Control. ! UCPCNCV-PA Set for Pressure Process Control.

! UCP-PH Set for pH Process Control.

! UCPCNCV-PH Set for pH Process Control.
! UCP-CT Set for Conductivity and TDS (Total
Dissolved Solids) Process Control.
! UCPCNCV-CT Set for Conductivity and TDS (Total
Dissolved Solids) Process Control.
- UCPCN Computer Controlled Process Control System (with
pneumatic control valve): (It uses SCADA System)
- UCP-P Computer Controlled Process Control Unit for the Study
! UCPCN-UB Base Unit. (Common for all Sets for process control of Pressure (Air). (It uses SCADA System)
type “UCPCN”).

Sets (sensor and elements + computer control software) - CECI Industrial Controllers Trainer.
used in the base unit

! UCPCN-T Set for Temperature Process Control. - CRCI Industrial Controllers Networking.

! UCPCN-C Set for Flow Process Control. - CEAB Trainer for Field Bus Applications.

! UCPCN-N Set for Level Process Control.

- CEAC Controller Tuning Trainer.
! UCPCN-PA Set for Pressure Process Control.

! UCPCN-PH Set for pH Process Control.

! UCPCN-CT Set for Conductivity and TDS (Total

Dissolved Solids) Process Control. 10.2.-Industrial Process Control (It uses SCADA System)

- UCPCV Computer Controlled Process Control System (with - CPIC Computer Controlled Process Control Plant with
speed controller): (It uses SCADA System) Industrial Instrumentation and Service Module (Flow,
Temperature, Level and Pressure).
! UCPCV-UB Base Unit. (Common for all Sets for process control
type “UCPCV”).
- CPIC-C Computer Controlled Process Control Plant with
Sets (sensor and elements + computer control software) Industrial Instrumentation and Service Module (only
used in the base unit Flow).

! UCPCV-T Set for Temperature Process Control.

- CPIC-T Computer Controlled Process Control Plant with
Industrial Instrumentation and Service Module (only
! UCPCV-C Set for Flow Process Control. Temperature).

! UCPCV-N Set for Level Process Control.

- CPIC-N Computer Controlled Process Control Plant with
Industrial Instrumentation and Service Module (only
! UCPCV-PA Set for Pressure Process Control. Level).

! UCPCV-PH Set for pH Process Control.

- CPIC-P Computer Controlled Process Control Plant with
! UCPCV-CT Set for Conductivity and TDS (Total Industrial Instrumentation and Service Module (only
Dissolved Solids) Process Control. Pressure).

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:17/20
Units
11.- Chemical Engineering - QUCB Crystallisation Unit.

11.1.-Chemical Engineering (Basic) - QALFC Computer Controlled Fixed Bed Adsorption Unit. (It uses
SCADA System)

- CAGC Computer Controlled Gas Absorption Column. (It uses SCADA

System)

- CAG Gas Absorption Column. 11.3.-Chemical Reactors

- UELLC Computer Controlled Liquid-Liquid Extraction Unit. (It uses
SCADA System) - QRQC Computer Controlled Chemical Reactors Training
System: (It uses SCADA System)
- UELL Liquid-Liquid Extraction Unit.
! QRUBI Base Service Unit. (Common for the following
Reactors type "QR").
- UDCC Computer Controlled Continuous Distillation Unit. (It uses
SCADA System)
Reactors
- UDCB Continuous Distillation Unit.
! QRIA Isothermal Reactor with Stirrer.
- UDDC Computer Controlled Batch Distillation Unit. (It uses SCADA
System) ! QRIA/D Isothermal Reactor with Distillation.

- UDDB Batch Distillation Unit. ! QRFT Tubular Flow Reactor.

! QRAD Adiabatic and Isothermal Reactor.

! QRSA Reactors with Stirrer in Series.

11.2.-Chemical Engineering (General)
- QRC Computer Controlled Chemical Reactors Trainer: (It uses
- UESLC Computer Controlled Solid-Liquid Extraction Unit. (It uses SCADA System)
SCADA System)

! QUSC Service Unit. (Common for the following Reactors type

- UESLB Solid-Liquid Extraction Unit. "QR..C”).

- EPAC Computer Controlled Rising Film Evaporator. (It uses SCADA Reactors
System)

! QRCAC Continuous Stirred Tank Reactor.

- EPDC Computer Controlled Falling Film Evaporator, for adding to
EPAC. (Accessory for EPAC).
! QRTC Tubular Flow Reactor.
- EPAB Rising Film Evaporator.
! QRDC Batch Reactor.
- EPDB Falling Film Evaporator, for adding to EPAB. (Accessory for
EPAB). ! QRSC Stirred Tank Reactors in Series.

- EDPAC Computer Controlled Double Effect Rising Film Evaporator. ! QRLC Laminar Flow Reactor.
(It uses SCADA System)
! QRPC Plug Flow Reactor.
- EDPDC Computer Controlled Double Effect Falling Film
Evaporator, for adding to EDPAC. (Accessory for EDPAC). - QR Chemical Reactors Trainer:
- EDPAB Double Effect Rising Film Evaporator.
! QUS Service Unit. (Common for the following Reactors type
“QR.").
- EDPDB Double Effect Falling Film Evaporator, for adding to EDPAB.
(Accessory for EDPAB). Reactors

- CAPC Computer Controlled Wetted Wall Gas Absorption ! QRCA Continuous Stirred Tank Reactor.
Column. (It uses SCADA System)
! QRT Tubular Flow Reactor.
- QDTLC Computer Controlled Liquid Mass Transfer and Diffusion
Coefficient Unit. (It uses SCADA System)
! QRD Batch Reactor.
- QDTL Liquid Mass Transfer and Diffusion Coefficient Unit.
! QRS Stirred Tank Reactors in Series.
- QDTGC Computer Controlled Gaseous Mass Transfer and
Diffusion Coefficient Unit. (It uses SCADA System) ! QRL Laminar Flow Reactor.

- QDTG Gaseous Mass Transfer and Diffusion Coefficient Unit. ! QRP Plug Flow Reactor.

- QCCC Computer Controlled Cracking Column. (It uses SCADA System) - QRCC Computer Controlled Catalytic Reactors. (It uses SCADA System)

- QUCC Computer Controlled Crystallisation Unit. (It uses SCADA System) - QRCB Catalytic Reactors.

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:18/20
Units
11.4.-Chemical Process 12.- Food & Water Technologies
- EMLS Liquid/Solid Mixing Unit. 12.1.-Food Technology (Basic)
- PADC Computer Controlled Teaching Autonomous Pasteurization
- EEC Corrosion Study Unit. Unit. (It uses SCADA System)

- ESED Sedimentation Study Unit. - PASC Computer Controlled Laboratory Pasteuriser. (It uses SCADA
System)
- LFFC Computer Controlled Fixed and Fluidised Bed Unit. (It uses - SBANC Computer Controlled Tray Drier. (It uses SCADA System)
SCADA System)
- SSPC Computer Controlled Spray Drier. (It uses SCADA System)
- LFF Fixed and Fluidised Bed Unit.
- SSPB Spray Drier.
- QEDC Computer Controlled Batch Solvent Extraction and
Desolventising Unit. (It uses SCADA System) - AEHC Computer Controlled Hydrogenation Unit. (It uses SCADA
System)

- QMS Solids Handling Study Unit. - AEDC Computer Controlled Deodorising Unit. (It uses SCADA System)

- TFUC Computer Controlled Continuous and Batch Filtration - TFDC Computer Controlled Teaching Frigorific Tank. (It uses
SCADA System)
Unit. (It uses SCADA System)
- EDLC Computer Controlled Teaching Machine for Putting in
- TFUB Continuous and Batch Filtration Unit. Plastic Packing Liquids. (It uses SCADA System)

- EDSC Computer Controlled Teaching Machine for Putting into a

- EFLPC Computer Controlled Deep Bed Filter Unit. (It uses SCADA
System) Container Solids. (It uses SCADA System)

- ROUC Computer Controlled Reverse Osmosis/Ultrafiltration Unit.

- EFLP Deep Bed Filter Unit. (It uses SCADA System)

- EII Ion Exchange Unit. - VPMC Computer Controlled Multipurpose Processing Vessel. (It uses
SCADA System)

- TPCC Computer Controlled Contact Plate Freezer. (It uses SCADA

System)

11.5.-Chemical Process (Agronomical Industry) - QEDC Computer Controlled Batch Solvent Extraction and
Desolventising Unit. (It uses SCADA System)
- SBANC Computer Controlled Tray Drier. (It uses SCADA System) - AFPMC Computer Controlled Plate and Frame Filter Press. (It uses
SCADA System)
- SSPC Computer Controlled Spray Drier. (It uses SCADA System)
- MINI-LAB Laboratory Homogeniser.
- SSPB Spray Drier.

12.2.-Food Technology (Milk)

- DSNC Computer Controlled Teaching Cream Separator. (It uses
11.6.-Chemical Process (Special) (It uses SCADA System) SCADA System)

- DSN Teaching Cream Separator.

- EPIRC Computer Controlled Pyrolysis Unit.
- EMANC Computer Controlled Butter Maker Teaching Unit. (It uses
- PLGC Computer Controlled Gas Washing Process Plant. SCADA System)

- EMAN Butter Maker Teaching Unit.

- PPDAC Computer Controlled Water Demineralization and Processing
Plant. - AUHTC Computer Controlled UHT Unit. (It uses SCADA System)

- PADC Computer Controlled Teaching Autonomous Pasteurization

Unit. (It uses SCADA System)

- PASC Computer Controlled Laboratory Pasteuriser. (It uses SCADA

System)

- CCDC Computer Controlled Teaching Curdled Tank. (It uses SCADA

System)

- PVQC Computer Controlled Teaching Cheese Vertical Press. (It uses

SCADA System)

- IYDC Computer Controlled Teaching Yogurt Incubator. (It uses

SCADA System)

- RDC Computer Controlled Teaching Cottage Cheese Maker. (It

uses SCADA System)

- AEQC Computer Controlled Cheese Vat & Cheese Macking

Accesories. (It uses SCADA System)

- FQDC Computer Controlled Teaching Cheese Melter. (It uses SCADA

System)

www.edibon.com Issue: HPI0111

Date: January/2011
 Products List Page:19/20
Units
12.3.-Food Technology (Oil) 13.- Environment
- PACC Computer Controlled Continuous Cycle Oil Production 13.1.-Water Handling
Plant. (It uses SCADA System)
- ESHC (4x2m) Computer Controlled Hydrologic Systems, Rain Simulator
and Irrigation Systems Unit (4x2m). (It uses SCADA System)

- ESHC (2x1m) Computer Controlled Hydrologic Systems, Rain Simulator

12.4.-Food Technology (Pilot Plants) (It uses ESN System) and Irrigation Systems Unit (2x1m). (It uses SCADA System)

- ESH (2x1m) Hydrologic Systems Rain Simulator and Irrigation

- LE00 Process Plant for Dairy Products with Scada-Net System Systems Unit (2x1m).
“ESN“.
- EFAS Ground Water Flow Unit.
- CA00 Process Plant for Meat with Scada-Net System “ESN“.
- PAHSC Computer Controlled Soil Moisture Suction Sand Unit.
- CI00 Process Plant for Citrus Fruits with Scada-Net System (It uses SCADA System)
“ESN“.
- PAHS Soil Moisture Suction Sand Unit.
- FR00 Process Plant for Fruits with Scada-Net System “ESN“. - PL Demonstration Lysimeter.
- VE00 Process Plant for Vegetables with Scada-Net System - PPD Drain Permeameter.
“ESN“.
- PDFDC Computer Controlled Drainage and Seepage Tank. (It uses
- AS00 Process Plant for Seeds Oil with Scada-Net System “ESN“. SCADA System)

- PDFD Drainage and Seepage Tank.

- AC00 Process Plant for Olive Oil with Scada-Net System “ESN”.
- PEIF Filterability Index Unit.
- TO00 Process Plant for Tomatoes with Scada-Net System “ESN“.
- ESED Sedimentation Study Unit.
- UV00 Process Plant for Grapes with Scada-Net System “ESN“.
- PDSC Computer Controlled Sedimentation Tank. (It uses SCADA
System)
- CE00 Process Plant for Cereals with Scada-Net System “ESN“.
- PDS Sedimentation Tank.

- PEFP Permeability/Fluidisation Studies Unit.

12.5.-Clean Water Process - HVFLM Mobile Bed and Flow Visualisation Unit.

- BL-6 Water Demineralizer.

- DESMID Ion Exchange Demineralizer. 13.2.-Water Treatment

- EFLPC Computer Controlled Deep Bed Filter Unit. (It uses SCADA
System)

- EFLP Deep Bed Filter Unit.

- EII Ion Exchange Unit.

- PDAC Computer Controlled Aerobic Digester. (It uses SCADA

System)

- PDA Aerobic Digester.

- PDANC Computer Controlled Anaerobic Digester. (It uses SCADA

System)

- PDAN Anaerobic Digester.

- PEFC Computer Controlled Flocculation Test Unit. (It uses SCADA

System)

- PEF Flocculation Test Unit.

- PEAIC Computer Controlled Aeration Unit. (It uses SCADA System)

- PEAI Aeration Unit.

- ROUC Computer Controlled Reverse Osmosis/Ultrafiltration

Unit. (It uses SCADA System)

- PPTAC Computer Controlled Water Treatment Plant. (It uses SCADA

System)

13.3.-Pollution (Ground) (It uses SCADA System)

- ECASC Computer Controlled Subterranean Water Pollution Unit.

www.edibon.com Issue: HPI0111

Date: January/2011
 Page:20/20
Products List
Complete Laboratories and Industrial Systems
Physics:
- 1SE. Secondary Education.
- 1AD. Advanced Physics Laboratory.
Electronics:
- 2TV. Technical and Vocational Education Electronics Laboratory.
- 2HE. Higher Education Electronics Laboratory.
Telecommunications:
- 3TV. Technical and Vocational Education Telecommunications Laboratory.

C/ Del Agua, 14. Polígono Industrial San José de Valderas. 28918 LEGANÉS. (Madrid). SPAIN. Phone: +34 920199363. Fax: +34 920198647. [email protected]
- 3HE. Higher Education Telecommunications Laboratory.
Electricity:
- 4TV. Technical and Vocational Education Electricity Laboratory.
- 4HE. Higher Education Electricity Laboratory.
- 4EMTV. Technical and Vocational Education Electrical Machines Laboratory.
- 4EMAD. Advanced Electrical Machines Laboratory.
Energy:
- 5TV. Technical and Vocational Education Energy Laboratory.
- 5AD. Advanced Energy Laboratory.
- 5TC. Energy Training Center.
Renewable Energy:
- 5RTV. Technical and Vocational Education Renewable Energy Laboratory.
- 5RAD. Advanced Renewable Energy Laboratory.
Automation and Systems:
- 6TV. Technical and Vocational Education Automation and Systems Laboratory.
- 6AD. Advanced Automation and Systems Laboratory.
Mechanics and Materials:
- 7TV. Technical and Vocational Education Mechanics and Materials Laboratory.
- 7HE. Higher Education Mechanics and Materials Laboratory.
Fluid Mechanics:
- 8AD1. Fluid Mechanics Laboratory (Phase 1).
- 8AD2. Fluid Mechanics Laboratory (Phase 2).
- 8AD3. Fluid Mechanics Laboratory (Phase 3).
Thermodynamics and Thermotechnics:
- 9AD1. Thermodynamics and Thermotechnics Laboratory (Phase 1).
- 9AD2. Thermodynamics and Thermotechnics Laboratory (Phase 2).
- 9AD3. Thermodynamics and Thermotechnics Laboratory (Phase 3).
Process Control:
- 10G1. General Process Control Laboratory (Phase 1).
- 10G2. General Process Control Laboratory (Phase 2).
- 10PCTC. Process Control and Maintenance Training Center.
- 10RC. Regulation, Control and Process Control Laboratory.
Chemical Engineering:
- 11TV. Technical and Vocational Education Chemical Engineering Laboratory.
- 11HE. Higher Education Chemical Engineering Laboratory.
- 11PTC. Petroleum Training Center.
Food Technology:
- 12TV. Technical and Vocational Education Food Technology Laboratory.
- 12HE. Higher Education Food Technology Laboratory.
- 12PP. Food Technology: Pilot Plants:
· For Dairy Products (LE00).
· For Meat (CA00).
· For Citrus Fruits (CI00).
· For Fruits (FR00).
· For Vegetables (VE00).
· For Seeds Oil (AS00).
· For Olive Oil (AC00).
· For Tomatoes (TO00).
· For Grapes (UV00).
· For Cereals (CE00).
Environment:
- 13AD. Advanced Environment Laboratory.
- 13DES. Desalination Laboratory.
- 13CW. Drinking and Handling Water Laboratory.
- 13DW. Dirty Water Treatment Laboratory.
Special Laboratories:
- 20SKILL. New Technologies Technical Skills Center.
- 20GREEN.Green Laboratory.
- 20AIRP. Airport Laboratory.
- 20TTC. Teachers Technical Training and Applied Research Center.
www.edibon.com

- 20TDL. Technical Professional Distance Learning.

- 20MOBIL. Mobile Units.
Turn-Key Projects
- Technical and Vocational Education. - Higher Technical Education.

Custom made Units

EDIBON can offer the design of teaching and research units, in accordance with the customer requirements, by using the EDIBON know-how and
computer controlled system, as we have developed big amount of new Teaching and Research Technology.

Name: ................................................................................................................ Position: ......................................................................................

Company/Teaching Center: ............................................................................ Department: ...............................................................................
E-mail: ............................................................................................................... Phone: ...................................... Fax: .........................................
Address: ............................................................................................................ City: ........................................... Country: ..................................
Issue: HPI0111
I would like you to send me information and prices of the areas/units marked with an " X ". Date: January/2011