MOLYKOTE® G-0010
Multipurpose Bearing Grease
Multipurpose polyurea-thickened bearing grease
Features Typical properties
• Wide temperature range Specification writers: These values are not intended for use in
• Extreme-pressure lubrication preparing specifications. Please contact your local MOLYKOTE®
• Excellent corrosion-preventive properties sales representative prior to writing specifications on this product.
• Shear-resistant
Standard Test Unit Result
• No intentional polytetrafluoroethylene (PTFE) or per- and
polyfluoroalkyl substances (PFAS) Color Green
Base oil type Mineral oil
Composition Thickener type Polyurea
• Modern polyurea thickener Consistency, viscosity
• Mineral base oil ASTM D217 Consistency NLGI 2
• Corrosion inhibitor Class
Worked penetration mm/10 265-295
Applications ASTM D445 Base oil viscosity @ mm2/s 125
40°C
Electrical motors, fan bearings, water pump bearings, and dryers
in chemical and paper industries. Temperature
Service temperature
range (est.) °C -30 to +170
Description
°F -20 to +340
MOLYKOTE® G-0010 Multipurpose Bearing Grease is a mineral-
ASTM Dropping point °C (°F) > 260 (> 525)
oil-based grease thickened by a di-urea system. MOLYKOTE® D2265
G-0010 Grease offers excellent low-temperature properties and
Oil separation/evaporation
load-carrying characteristics. MOLYKOTE® G-0010 Grease
provides premium rust prevention and, due to its polyurea FTMS 791C- Oil separation mass-% 2.3
321.2 (24 hrs/ 100°C)
thickener, superior shear and oxidation stability.
Evaporation loss mass-% 0.1
(24 hrs/ 100°C)
How to use Load-carrying capacity, wear protection, speed
Apply using conventional grease application methods (i.e., clean
ASTM Four ball tester weld kg 315
brush, grease gun and manual or automated dispensing D2596 load
equipment).
ASTM Wear scar under (40 kg; mm 0.60
D2266 75°C; 1 hr)
Handling precautions Dn value (DR x rpm; M 400
estimated)
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE
USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE ASTM Corrosion prevention 1, 1, 1 Pass
D1743
HANDLING, READ SAFETY DATA SHEETS AND CONTAINER
ASTM: American Society for Testing and Materials. FTMS: Federal
(1)
LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD Test Methods.
INFORMATION.
Usable life and storage
When stored between 0 and 40°C in the original unopened
containers, this product has a usable life of 60 months from the
date of production.
Packaging
This product is available in different standard container sizes as
shown on molykote.com. Detailed container size information
should be obtained from your nearest MOLYKOTE® sales office
or MOLYKOTE® distributor.
DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc.
unless otherwise noted.
© 2003-2024 DuPont.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
evaluation under end use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
infringe on patents.
Form No. 80-3280B-01 (01/24) AGP17374
