Scribd
Upload
20 views2 pages

THIES Compact Anemometer Type Overview

Uploaded by

vigambetkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views2 pages

THIES Compact Anemometer Type Overview

Uploaded by

vigambetkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Wind

Compact

Model Brief Description Order No. Technical Data

Wind Velocity
Transmitters
Wind Transmitter 4.3518.00.000 With heating open collector sink
Compact 4.3520.00.000 With heating open collector source
• Frequency output 4.3520.10.000 W/o heating open collector source
Measuring range 0.5-50 m/s
Measuring transmitter for the Accuracy ±3% of meas. value
wind velocity with frequency or ±0.5 m/s
output (open collector). Resolution < 0.1 m/s
The cup-star consists of Electr. output 2-573 Hz
plastic, the housing is made Operating voltage 10-28 V DC
of anodised aluminium and Current supply 20 mA
plastic. Heating max. 20 W;
The instrument has a threaded 24 V AC/DC
pin PG 21 with 2 nuts for Ambient temp. -40 ... +70 °C
mounting. Connection 5 m cable. LiYCY
5 x 0.25 mm2
Dimensions Ø 135 x 165 mm
Protection IP 55
Weight 0.4 kg

Wind Transmitter 4.3519.00.000 Measuring range 0.5-50 m/s


Compact Accuracy ±3% of meas. value
• Low Power Instrument or ±0.5 m/s
with frequency output Resolution < 0.1 m/s
Electr. output 2-630 Hz
Measuring transmitter for the Operating voltage 3.3-42 V DC
measurement of the horizontal Current consumpt. < 1 mA
wind velocity with frequency Heating max. 20 W;
output (active signal). 24 V AC/DC
Suitable for data loggers. Ambient temp. -40 ... +70 °C
The cup-star consists of plastic, Connection 12 m cable. LiYCY
the housing is made of anodi- 5 x 0.25 mm2
sed aluminium and plastic. Dimensions Ø 135 x 165 mm
The instrument has a threaded Protection IP 55
pin PG 21 with 2 nuts for Weight 0.75 kg
mounting.

Wind Transmitter 4.3519.00.xxx Electr. output Load


Compact (at with operat. volt.)
• Analogue output .140 0-20 mA max. 500 Ω ;
(> 13 V DC)
Measuring transmitter for the .141 4-20 mA max. 500 Ω ;
measurement of the horizontal (> 13 V DC)
wind speed with analogue .161 0-10 V min. 1 k Ω
output signals. .167 0-2 V min. 1 k Ω
The cup-star consists of plastic, .173 0-5 V min. 1 k Ω
the housing is made of ano- Measuring range 0.5-50 m/s
dised aluminium and plastic. Accuracy ±3% of meas. value
The instrument has a threaded or ±0.5 m/s
pin PG 21 with 2 nuts for Resolution < 0.1 m/s
mounting. Operating voltage 9-30 V DC or 24 V AC
for 0-10 V output. 13-30 V DC or 24 V AC
Current consumption 50 mA
Heating max. 20 W;
24 V AC/DC
Ambient temp. -40 ... +70 °C
Connection 12 m cable, LiYCY
6 x 0.25 mm2
Dimensions Ø 135 x 165 mm
Protection IP 55
Weight 0.75 kg
Wind
Compact

Model Brief Description Order No. Technical Data

Wind Transmitter 4.3518.00.700 Connection 7-pole plug


Compact 4.3519.00.700 Dimensions
• Model with plug connection 4.3519.00.740 Height (with plug) 225 mm
4.3519.00.741 Cup star Ø 135 mm
Model like 4.3518.00.000 4.3519.00.761 Housing Ø 50 mm
and 4.3519.00.000/1xx Weight 0. 4 kg
however with implemented
plug instead of connected
cable.

4.3128.xx.000
With heating
0-360°
Without heating
±5°
90°; 45°; 22
Measuring range
Accuracy
Resolution
Output
Electr

Connection

Dimensions
Height
Wind vane
Housing
Protection
Weight

You might also like