WIRELINE SAFETY SWITCH PANEL

ALS1A006

WIRELINE SELECTOR SWITCH

WIRELINE RESISTANCE TESTING
GALVOMETER FOR BLASTING CAP RESISTANCE TESTING
WIRELINE LOCK OUT KEY SWITCH

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 1 of 20

TABLE OF CONTENTS

SPEC SHEET – TECH SUPPORT

1.0 INTRODUCTION
2.0 FEATURE DESCRIPTION
3.0 GENERAL SPECIFICATIONS
4.0 PARTS LIST
5.0 SCHEMATICS
6.0 WIRE LIST

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 2 of 20

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 3 of 20
WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 4 of 20
OBTAINING TECHNICAL ASSISTANCE
Phone tech support is available to customers of BenchMarkWireline.

Prior to calling please go through the following checklist and gather information. It will
be needed by the support tech to help diagnose the problem.

 Equipment model number

o This can be found on the machine, panel, cable etc.

 Equipment serial number

o This can be found on the machine, panel, cable etc.

Contact Information
Website: www.BenchMarkWireline.com
Email: [email protected]
Phone: +1-281-346-4300 ask for Tech Support
Fax: +1-281-246-4301

Equipment may be returned for repair and maintenance.

Please notify us prior to shipment.

Ship returned equipment to:

Benchmark Wireline Products
36220 FM 1093
Simonton, Texas 77476
USA

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 5 of 20

1.0 INTRODUCTION
The purpose of this panel is to provide a safe method to prevent the accidental
application of power to the wireline and a convenient method to switch between different
wireline cables.

The panel provides 4 basic functions:

1. Safety Lockout
When the key switch is in the center SAFE position, power cannot be applied to the
wireline. If the key is removed, the switch is locked into the SAFE position.

This prevents accidentally applying power to the wireline. When an explosive device
is attached to the wireline, the key should always be in the SAFE position and in
possession of one of the crew members working outside the unit.

2. Line Select
This feature allows the recording system to be easily connected to 2 different
wirelines.

3. Cable Resistance / Diode Resistance Test

This feature provides a means to check the wireline for leakage or to check for the
presence of diodes in a tool or sub connected to the wireline.

WARNING: This panel includes a current limiting test circuit to limit the
current. DO NOT MODIFY OR CHANGE ANY PART OF THIS CIRCUIT.

4. Cable Conductor Access

Jacks are provided on the front panel to provide easy access to the wireline. This
makes it easy to test voltages or connect different equipment to the wireline.

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 6 of 20

2.0 FEATURE DESCRIPTION

SW2
This switch selects between wireline 1 and wireline 2. When the key is in the center
position, both wirelines are grounded through two 10K ohms resistors connected in
parallel (5K ohms). When in LINE 1 position, wireline 1 is connected through the switch
to the LINE CONNECTOR J1. When in LINE 2 position, wireline 2 is connected through
the switch to LINE CONNECTOR J1. The key can only be removed when the switch is
in the SAFE position.

J2
This connector is connected to J6 on the rear panel. This provides a path for power and
signal from the Logging System. When connected to J1 through a jumper cable and the
key switch SW2 is in either LINE 1 or LINE 2 position, the Logging System will be
connected to the wireline.

SW4
This switch connects the J1 (Line Connector) to the test circuit. When the key switch
SW2 is in either LINE 1 or LINE 2 position, the meter will be connected to the wireline.
When the key switch is in the SAFE position, J1 is isolated from the wireline.

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 7 of 20

2.0 FEATURE DESCRIPTION continued
TP1 and TP2
These test points provide a means to connect a test meter to the wireline or connect the
wireline to another panel or service. When the key switch is in the SAFE position, these
test points are isolated from the wireline.

SW3
This switch provides a connection to meter M1.

R2
This Potentiometer adjusts the meter span. Press and hold the Zero button then
adjust this knob until the meter reads “0”. If the meter cannot be set to “0”,
the batteries inside the panel may need to be replaced.

SW1
This switch sets the meter polarity when connected to the wireline. In the “+” plus
position, positive voltage will be applied to the wireline conductor through J3 and J1 and
negative voltage will be applied to armor. In the “–“ negative position negative voltage
will be applied to the wireline conductor through J3 and J1 and positive voltage will be
applied to armor. This provides a means to test diodes. When the key switch is in the
SAFE position, J1 is isolated from the wireline and no power is applied.

M1
This meter displays the result of the voltage test (see SW1). The meter displays the
resultant reading on an ohmmeter scale. The diode symbol on the meter indicates
where the needle should point when reading through a diode.

SW3
This push button switch connects the internal battery to the meter so the Zero value
can be set. Refer to R2.

J6 Logging System
This connector is provided to connect to the cable going to the Logging System. It is
also connected directly to the Logging System jack on the front panel (J2).

J7 Slip Ring
This connector is connected directly to the wireline. Line 1 is connected to pins A
(conductor) and D (armor). Line 2 is connected to pins B (conductor) and E (armor).

J4 Line 1
Line 1 is connected to the Line 1 position on SW2.

J5 Line 2
Line 2 is connected to the Line 2 position on SW2

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 8 of 20

3.0 GENERAL SPECIFICATIONS

Height: 3.5 in .089 m

Width 19.0 in .482 m
Depth: 8.6 in .292 m
Weight: 2 lbs .907 kg

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 9 of 20

4.0 PARTS LIST
P/N DESCRIPTION QTY
AMS5P191 SWITCH SPDT MOM PUSHBUTTON NKK MB2011SS1W01-RO 1
ACMU1P79 CABLE COAX BELDEN 8259 0
ALS1M003 BRACKET TOP PANEL SAFETY SW 1
ALS1M021 PANEL FRONT SAFETY SWITCH 2 X SINGLE COND W/METER 2U 1
ALS1M024 PANEL REAR 3 BATT 4 CON SAFESW 1
ALS1M125 PANEL BTM 2AABATT 4 CON SAFESW 1
ALS1P003 METER 0 - 1 MA DC SIMPSON 1
ALS1P004 CONN AMP 83-1R PL259 UHF 4
ALS1P005 SWITCH KEYLOCK 3 POS COLE 1
ALS1P006 BATTERY SILVER CHLORIDE 2
ALS1P007 CHASSIS 3.50 X 19.0 X 8.50 AL 1
ALS1P008 COVER CHASSIS 19.0 X 8.50DP AL 1
ALS1P011 POT 250 OHM CLAROSTAT 381N250 1
ALS1P012 SWITCH DPDT TOGGLE PNL MNT 1
ALS1P013 JACK TIP RED STD TIP PLUG 1
ALS1P014 JACK TIP BLK STD TIP PLUG 1
ALS1P017 CLAMP LOOP RUBBER CUSHION 3/4" 4
ALS1P022 RESISTOR 10KOHM 5W WW 4
ALS1P025 SCREW 2-56 X 3/8 BINDER HD SST 8
ALS1P026 NUT 2-56 HEX MACHINE SST 8
ALS1P027 WASHER #2 FLAT SST 8
ALS1P028 WASHER #2 LOCK SST 8
ALS1P029 CONN AMP BNC FRONT MOUNT BULKHEAD RECEPTACLE 31-221-RFX 2
ALS1P039 CABLE ASSY BNC TO UHF 8 IN 1
ALS1P040 BATTERY LITHIUM AA 1.5 V 2
AM5KP102 CONN MS3106F-14S-6P 1
AMS1P054 WASHER #10 FLAT SS 6
AMS4P018 SWITCH SPDT PUSH MOM MPA-106F 1
AMS4P021 SWITCH CAP ALCO C-22 BLACK 1
AMS4P063 RESISTOR 49.9 OHM 1/8W 1% 2
AMS4P290 TERMINAL INSULATED SOLDR 6-32 2
AMS4P714 STRAP BATTERY 9V SNAP ON 6"LD KEYSTONE 2239 1
AMS4P896 RESISTOR 3.3OHM AXIAL 1
AMS4P903 SWITCH DPDT MOM NKK 1
AMS5P182 HOLDER BATT 2AA W 9V SNAP CON KEYSTONE 2474 1
AMS5P191 SWITCH SPDT MOM PUSHBUTTON 1
AMS5P192 SWITCH CAP SCREW ON BLACK NKK AT407A 1
AMS7P034 KNOB #KN500A-1/8 ALCOA 1
AMS7P041 DUST CAP MS25043-14DA RECEPT POWER IN 1
C276P027 SCREW 10-32 X 3/8 PHIL PAN SST 6
C276P035 WASHER #10 LOCK SS 6
C276P193 NUT 10-32 HEX MACHINE SST 6
C276P365 CONN MS3102E-14S-6S 1

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 10 of 20

5.0 SCHEMATICS

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 11 of 20

5.0 SCHEMATICS continued

This circuit provides a current limit of 20ma.

DO NOT MODIFY OR CHANGE ANY

PART OF THIS CIRCUIT

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 12 of 20

6.0 WIRE LIST

S1 KEY SWITCH
S2 MOMENTARY TOGGLE SWITCH
S3 +/- SWITCH
S4 ZERO SWITCH ON THE FRONT PANEL
M1 METER ON FRONT PANEL
TP1 RED PLUG ON FRONT PANEL
TP2 BLACK PLUG ON FRONT PANEL
B1 BATTERY 1
B2 BATTERY 2
R1 SPAN KNOB ON THE FRONT PANEL
R2 ON THE FRONT PANEL
R3 ON THE REAR PANEL
R4 ON THE REAR PANEL
R5 ON THE REAR PANEL
R6 ON THE REAR PANEL
R7 49.9 OHM RESISTOR IN HARNESS
R8 49.9 OHM RESISTOR IN HARNESS
J1 LINE 1 CONNECTOR ON THE REAR PANEL
J2 LINE 2 CONNECTOR ON THE REAR PANEL
J3 LOGGING SYSTEM CONNECTOR ON THE REAR PANEL
J4 SLIP RING CONNECTOR ON THE REAR PANEL
J5 LINE CONNECTOR FRONT PANEL
J6 LOGGING SYSTEM CONNECTOR FRONT PANEL

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 13 of 20

6.0 WIRE LIST continued
S1 - KEY SWITCH ON THE FRONT PANEL
SIGNAL
FROM TO
NAME
COAX, THIS
COAX
END TIE SLIP RING CONNECTOR ON
S1 - C1 CENTER COAX J4 - A LINE 1
SHIELDS THE REAR PANEL
WIRE
TOGETHER
COAX, THIS
COAX
END TIE LINE 1 CONNECTOR ON THE
S1 - C1 CENTER COAX J1 - CENTER LINE 1
SHIELDS REAR PANEL
WIRE
TOGETHER
COAX, THIS
COAX
END TIE SLIP RING CONNECTOR ON
S1 - C2 CENTER COAX J4 - C LINE 2
SHIELDS THE REAR PANEL
WIRE
TOGETHER
COAX, THIS
COAX
END TIE LINE 2 CONNECTOR ON THE
S1 - C2 CENTER COAX J2 - CENTER LINE 2
SHIELDS REAR PANEL
WIRE
TOGETHER
KEY LOCK SWITCH ON THE
S1 - 1 JUMPER RED 20 S1 - 8 LINE
FRONT PANEL
TEST POINT ON THE FRONT
S1 - 8 RED 20 TP1 LINE
PANEL
TEST POINT COAX TOGGLE MOMENTARY
TP - 1 ON THE CENTER COAX S2 - 2 SWITCH ON THE FRONT LINE
FRONT PANEL WIRE PANEL

S1 - 2 JUMPER BLU 20 S1 - 3 LINE 1

RESISTOR ON THE REAR
S1 -3 BLU 20 R3 - 1 LINE 1
PANEL
RESISTOR ON THE REAR
R3 - 1 BLU 20 R4 - 1 LINE 1
PANEL
KEY LOCK SWITCH ON THE
S1 - 3 (REF) YEL 20 S1 - 2 LINE 1
FRONT PANEL
KEY LOCK SWITCH ON THE
S1 - 6 JUMPER ORN 20 S1 - 7 LINE 2
FRONT PANEL
RESISTOR ON THE REAR
S1 - 7 ORN 20 R5 - 1 LINE 2
PANEL
RESISTOR ON THE REAR
R5 - 1 ORN 20 R6 - 1 LINE 2
PANEL
KEY LOCK SWITCH ON THE
S1 - 7 JUMPER (REF) ORN 20 S1 - 6 LINE 2
FRONT PANEL
COAX
KEY LOCK SWITCH ON THE
S1 - 8 (REF) CENTER COAX S1 - 1 LINE
FRONT PANEL
WIRE
COAX TOGGLE MOMENTARY
S1 - 8 (REF) CENTER COAX S2 - 2 SWITCH ON THE FRONT LINE
WIRE PANEL
COAX
TEST POINT ON THE FRONT
S1 - 8 (REF) CENTER COAX TP1 LINE
PANEL
WIRE

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 14 of 20

6.0 WIRE LIST continued
S2 - MOMENTARY TOGGLE SWITCH
SIGNAL
FROM TO
NAME

S2 - 3 - ZERO SWITCH ON THE

RED 20 S4 - NC METER
NO FRONT PANEL

COAX
S2 - 1 - LINE CONNECTOR FRONT
CENTER COAX J5 - CENTER LINE
NC PANEL
WIRE

S3 - +/- SWITCH ON THE FRONT PANEL

SIGNAL
FROM TO
NAME
+/- SWITCH ON THE FRONT
S3 - B3, M1 - PANEL, METER ON FRONT
S3 - A1 JUMPER BRN 20 METER -
(-), R2 - 1 PANEL, RESISTOR ACROSS
M1
ZERO SWITCH ON THE
S3 - A2 RED 20 S4 - C METER
FRONT PANEL
S3 - B1, R7 - +/- SWITCH ON THE FRONT
S3 - A3 JUMPER WHT 20
2 PANEL, R7 IN HARNESS
+/- SWITCH ON THE FRONT
S3 - B1 (REF) WHT 20 S3 - A3
PANEL
SPAN KNOB ON THE FRONT
S3 - B1 (REF) WHT 20 R1 - 2W
PANEL
GND BUS GND BUS BAR ON THE REAR
S3 - B2 BLK 20 GND
BAR PANEL
+/- SWITCH ON THE FRONT
S3 - B3 (REF) BRN 20 S3 - A1 METER -
PANEL
S3 - B3 (REF) BRN 20 M1 - (-) METER ON FRONT PANEL METER -
RESISTOR INSTALLED
S3 - B3 (REF) BRN 20 R2 - 1 METER -
ACROSS THE METER LEADS

S4 - ZERO SWITCH ON THE FRONT PANEL

SIGNAL
FROM TO
NAME
+/- SWITCH ON THE FRONT
S4 - C (REF) RED 20 S3 - A2 METER
PANEL
GND BUS GND BUS BAR ON THE REAR
S4 - NO BLK 20 GND
BAR PANEL

TOGGLE MOMENTARY
S4 - NC (REF) RED 20 S2 - 3 SWITCH ON THE FRONT METER
PANEL

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 15 of 20

6.0 WIRE LIST continued
M1 - METER ON FRONT PANEL
FROM TO SIGNAL NAME
+/- SWITCH ON THE
M1 - (-) (REF) BRN 20 S3 - A1 METER -
FRONT PANEL
RESISTOR INSTALLED
M1 - (-) (REF) BRN 20 R2 - 1 ACROSS THE METER METER -
LEADS
+/- SWITCH ON THE
M1 - (-) (REF) BRN 20 S3 - B3 METER -
FRONT PANEL
RESISTOR IN HARNESS &
M1 - (+) RED LEAD 20 R8 - 2, R2 - 2 RESISTOR ACROSS METER +
METER

TP1 - RED PLUG ON FRONT PANEL

FROM TO SIGNAL NAME
KEY LOCK SWITCH ON
TP1 (REF) RED 20 S1 - 1 LINE
THE FRONT PANEL
COAX TOGGLE MOMENTARY
TP1 (REF) CENTER COAX S2 - 2 SWITCH ON THE FRONT LINE
WIRE PANEL
COAX
KEY LOCK SWITCH ON
TP1 (REF) CENTER COAX S1 - 8 LINE
THE FRONT PANEL
WIRE

TP2 - BLACK PLUG ON FRONT PANEL

FROM TO SIGNAL NAME
GND BUS BAR ON THE
TP2 BLK 20 GND BUS BAR GND
REAR PANEL

B1 - BATTERY 1 INSTALLED IN THE CHASSIS

FROM TO SIGNAL NAME
SPAN KNOB ON THE
B1 - (-) BLK 20 R1- 3CCW
FRONT PANEL

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 16 of 20

6.0 WIRE LIST continued
B2 - BATTERY 2 INSTALLED IN THE CHASSIS
FROM TO SIGNAL NAME
B2 - (+) RED LEAD 20 R8 - 1 RESISTOR IN HARNESS

B2 - (-) (REF) RED 20 B1 - (+) BATTERY 1 IN THE CHASSIS

R1 - SPAN KNOB ON THE FRONT PANEL

FROM TO SIGNAL NAME
R1 - 2W WHT 20 R7 - 1 RESISTOR IN HARNESS

R1 - 2W (REF) WHT 20 S3 - A3 +/- SWITCH ON THE FRONT PANEL

R1 - 3CCW (REF) BLK 20 B1 - (-) BATTERY 1 IN THE CHASSIS

R2 - 3.3K INSTALLED ACROSS M1

FROM TO SIGNAL NAME

R2 - 1 (REF) BRN 20 S3 - A1 +/- SWITCH ON THE FRONT PANEL

R2 - 1 (REF) BRN 20 S3 - B3 +/- SWITCH ON THE FRONT PANEL

R2 - 1 (REF) BRN 20 M1 - (-) METER ON FRONT PANEL

R2 - 2 (REF) RED 20 M1 - (+) METER ON FRONT PANEL

R2 - 2 (REF) RED 20 B3 - (+) BATTERY 2 IN THE CHASSIS

R3 - INSTALLED ON THE REAR PANEL

FROM TO SIGNAL NAME
KEY LOCK SWITCH ON THE FRONT
R3 - 1 (REF) BLU 20 S1 - 2 LINE 1
PANEL
KEY LOCK SWITCH ON THE FRONT
R3 - 1 (REF) BLU 20 S1 - 3 LINE 1
PANEL
R3 - 1 (REF) BLU 20 R4 - 1 RESISTOR ON THE REAR PANEL LINE 1
GND BUS
R3 - 2 BLK 20 GND BUS BAR ON THE REAR PANEL GND
BAR

R4 - INSTALLED ON THE REAR PANEL

FROM TO SIGNAL NAME
KEY LOCK SWITCH ON THE FRONT
R4 - 1 (REF) BLU 20 S1 - 2
PANEL
KEY LOCK SWITCH ON THE FRONT
R4 - 1 (REF) BLU 20 S1 - 3
PANEL
R4 - 1 (REF) BLU 20 R3 - 1 RESISTOR ON THE REAR PANEL

R4 - 2 BLK 20 GND BUS BAR GND BUS BAR ON THE REAR PANEL GND

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 17 of 20

6.0 WIRE LIST continued
R5 - INSTALLED ON THE REAR PANEL
SIGNAL
FROM TO
NAME
KEY LOCK SWITCH ON THE
R5 - 1 (REF) ORN 20 S1 - 6
FRONT PANEL
KEY LOCK SWITCH ON THE
R5 - 1 (REF) ORN 20 S1 - 7
FRONT PANEL
RESISTOR ON THE REAR
R5 - 1 (REF) ORN 20 R6 - 1
PANEL
GND BUS GND BUS BAR ON THE REAR
R5 - 2 BLK 20 GND
BAR PANEL

R6 - INSTALLED ON THE REAR PANEL

SIGNAL
FROM TO
NAME
KEY LOCK SWITCH ON THE
R6 - 1 (REF) ORN 20 S1 - 6
FRONT PANEL
KEY LOCK SWITCH ON THE
R6 - 1 (REF) ORN 20 S1 - 7
FRONT PANEL
RESISTOR ON THE REAR
R6 - 1 (REF) ORN 20 R6 - 1
PANEL
GND BUS GND BUS BAR ON THE REAR
R6 - 2 BLK 20 GND
BAR PANEL

J1 - LINE 1 CONNECTOR ON THE REAR PANEL

SIGNAL
FROM TO
NAME
COAX
J1 - KEY LOCK SWITCH ON THE
(REF) CENTER COAX S1 - AW LINE 1
CENTER FRONT PANEL
WIRE
COAX
J1 - SLIP RING CONNECTOR ON
(REF) CENTER COAX J4 - A LINE 1
CENTER THE REAR PANEL
WIRE
J1 - CONNECT THE COAX
GND GND LUG GND
SHIELD SHIELD TO J1 SHIELD

J2 - LINE 2 CONNECTER ON THE REAR PANEL

SIGNAL
FROM TO
NAME
COAX
J2 - KEY LOCK SWITCH ON THE
(REF) CENTER COAX S1 - BW LINE 2
CENTER FRONT PANEL
WIRE
COAX
J2 - SLIP RING CONNECTOR ON
(REF) CENTER COAX J4 - C LINE 2
CENTER THE REAR PANEL
WIRE
J2 - CONNECT THE COAX
GND GND
SHIELD SHIELD TO J2 SHIELD
J2 - GND GND BUS GND BUS BAR ON THE REAR
BLK 20 GND
LUG BAR PANEL

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 18 of 20

6.0 WIRE LIST continued
J3 - SYSTEM CONNECTOR ON THE REAR PANEL
FROM TO SIGNAL NAME
COAX
SYSTEM CONNECTOR ON THE
J3 - CENTER CENTER COAX J6 - CENTER SYSTEM
FRONT PANEL
WIRE
SOLDER THE
COAX
J3 - SHIELD SHIELD TO THE COAX GND GND GND
SHIELD
GND LUG OF J3
J3 - GND GND BUS BAR ON THE REAR
BLK 20 GND BUS BAR GND
LUG PANEL

J4 - SLIP RING CONNECTOR ON THE REAR PANEL

FROM TO SIGNAL NAME
COAX
KEY LOCK SWITCH ON THE
J4 - A (REF) CENTER COAX S1 - AW LINE 1
FRONT PANEL
WIRE
COAX
LINE 1 CONNECTOR ON THE
J4 – A (REF) CENTER COAX J1 - CENTER LINE 1
REAR PANEL
WIRE
COAX
LINE 1 CONNECTOR ON THE
J4 - C (REF) CENTER COAX J2 - CENTER LINE 2
REAR PANEL
WIRE
COAX
LINE 1 CONNECTOR ON THE
J4 - C (REF) CENTER COAX J2 - CENTER LINE 2
REAR PANEL
WIRE
GND BUS BAR ON THE REAR
J4 - B BLK 20 GND BUS BAR GND
PANEL
GND BUS BAR ON THE REAR
J4 - D BLK 20 GND BUS BAR GND
PANEL

J5 - LINE CONNECTOR ON THE FRONT PANEL

FROM TO SIGNAL NAME

COAX
TOGGLE MOMENTARY SWITCH
J5 - CENTER (REF) CENTER COAX S2 - 1 LINE
ON THE FRONT PANEL
WIRE
CONNECT THE
J5 - SHIELD BLK 20 GND GND LUG GND
SHIELD TO J5
J5 - GND GND BUS BAR ON THE REAR
BLK 20 BUS BAR GND GND
LUG PANEL

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 19 of 20

6.0 WIRE LIST continued
J6 - SYSTEM CONNECTOR ON THE FRONT PANEL
FROM TO SIGNAL NAME
COAX
SYSTEM CONNECTOR ON
J6 - CENTER (REF) CENTER COAX J3 - CENTER SYSTEM
THE REAR PANEL
WIRE

SOLDER THE
SHIELD TO COAX
J6 - SHIELD COAX GND GND LUG GND
THE GND LUG SHIELD
OF J6

J6 - GND LUG BLK 20 GND BUS BAR GND BUS BAR GND

WIRELINE SAFETY SWITCH PANEL MAY 2020 Page 20 of 20