✔

SUPPLIER DOCUMENT REVIEW

PERMISSION TO PROCEED DOES NOT CONSTITUTE ACCEPTANCE OR
APPROVAL OF DECISION DETAILS, CALCULATION. ANALYSIS TEST
METHODS OR MATERIALS DEVELOPED OR SELECTED BY SUPPLIER
AND DOES NOT RELIEVE SUPPLIER FROM FULL COMPLIANCE WITH
CONTRACTUAL OBLIGATIONS.
✔ 1. WORK MAY PROCEED
2. REVISE & RESUBMIT, WORK MAY PROCEED SUBJECT TO
INCORPORATION OF CHANGES INDICATED.
3. REVISE & RESUBMIT, WORK MAY NOT PROCEED.
4. REVIEW NOT REQUIRED, WORK MAY PROCEED.

P.O. NO. ZHWD-01 ORIG. Maged

EQUIP. TAG. DATE 8-Apr-2020

ENPPI SUPP. DOC. NO. REV.

ZOHR DEVELOPMENT PROJECT

Desalination Plant for Zohr Onshore Development Project (ZHWD-01)

PUMPS DATA SHEET

EX-DE 02 6/4/2020 ISSUE FOR Final M Zanaty H.Ibrahim M Attia

EX-DE 01 24/3/2020 ISSUE FOR Approval M Zanaty H.Ibrahim M Attia
EX-DE 00 11/2/2020 ISSUE FOR COMMENTS M Zanaty H.Ibrahim M Attia
Validity Revision
Vendor Vendor Vendor Contractor Company
Status Number Date Description
Prepared Verified Approved Checked Approved
Revision index
Company logo and business name Project name Company Document ID

Zohr Development 193202DMGAW9329

Project Job N.

Contractor logo and business name Contractor Document ID

N/A
Job N. 4807-440
Vendor logo and business name Vendor Document ID
N/A
Global Oilfield Exploration & Production Services
Job N.
Facility and Sub Facility Name Scale Sheet of Sheets

Desalination Plant for Zohr Onshore Development Project (ZHWD-01) 1/31

Document Title Supersedes N.

Superseded by N.
PUMPS DATA SHEET Plant area Plant unit
U07 500
Software: Microsoft Excel Filename:193202DMGAW9329_EXDE02_031.PDF
This document is property of Company.
It shall neither be shown to Third Parties not used for purposes other than those for which it has been sent.
 Sheet of Sheets
Company Document ID Contractor Document ID
2/31
Validity Revision
N/A Status Number
193202DMGAW9329 Vendor Document ID
EX-DE 02
N/A
Project/Initiative Name Desalination Plant for Zohr Onshore Development Project (ZHWD-01)
Document Title PUMPS DATA SHEET
Abstract

Document Verification
Prepared by Unit Signature Date
M Zanati 6/4/2020
Vendor

Checked by Unit Signature Date

H.Ibrahim 6/4/2020
Approved by Unit Signature Date
M Attia 6/4/2020

Verified by Unit Signature Date

Interdisciplinary
Company

Review

Verified by Unit Signature Date

Verified by Unit Signature Date

Checked by Unit Signature Date

Contractor
Checked

Checked by Unit Signature Date

Approved by Unit Signature Date

Company
Approved

Endorsed by Unit Signature Date

This document is property of Company.

It shall neither be shown to Third Parties not used for purposes other than those for which it has been sent.
 Sheet of Sheets
Company Document ID Contractor Document ID
3/31
Validity Revision
N/A Status Number
193202DMGAW9329 Vendor Document ID
EX-DE 02
N/A
REVISION LIST

00 Issued for Comments

01 Issued for Approval
02 Issued for Final

HOLD RECORD

This document is property of Company.

It shall neither be shown to Third Parties not used for purposes other than those for which it has been sent.
 Scope of Supply
Customer Globoilsetcore Petroleum Services / Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Globoil
Project Name Globoil - SWRO 1'320 m3/day
Inquiry Number/ID
Item TAG number 02-500-0-PA-001A/B
Application Not specified Type / Size / Stages A21-65 O / 1
Pump speed 2955 rpm

Pump and Accessories

Qty Description
2 A21-65 O
End suction single stage centrifugal pump
Quality Requirement
CE 2006/42/EC
EN ISO 5199:2002 Class II
Pump and accessories
Hydraulic performance acceptance grade
ISO 9906:2012 / HI 14.6-2011 Grade 2B
Guaranteed efficiency
Impeller
Impeller type: Open
Materials of construction
Volute case : Super duplex steel (ASTM A890 5A)
Impeller : Super duplex steel (ASTM A890 5A)
Shaft: Duplex steel (EN1.4460 / AISI 329 / SS2324)
Bearing housing : Grey cast iron (ASTM A48 CL35B)
Surface treatment
Painting method: Standard, atmospheric-corrosivity C4, ISO 12944-2
Color shade: Light grey (NCS1700)
Volute case
Flange drilling : EN 1092-1 PN16
Shaft seal
Sealing unit type: Cartridge single, throttling seal chamber, sleeve installation (MS34)
Shaft seal fluid: Recirculation flushing
Mechanical seal type: John Crane, SB1 (FD01)
Shaft seal material: C/ SiC
Shaft seal elastomer material: EPDM, Ethylene propylene
Seal flush plan: Similar to Plan 11 (ISO 5199 Designation code 02)
Flush piping type: AVESTA 254 SMO® piping with connectors
Bearing unit
Bearing lubrication type: Oil splash
Bearing isolation: Standard labyrinth seal
Coupling
Metastream TSKS 0033
Coupling guard : Brass
Baseplate
Baseplate type: Standard baseplate for pump and motor (STD)
Baseplate material: Carbon steel
Baseplate equipment: Foundation screw, Grouted
Packing
Packing type: Crate (gap boarded)

Driver
Qty Description
2
Motor
Motor supplier: Motor supplied by Sulzer, mounted by Customer
Motor detail: ABB M3BP 2 poles 30kW IP55 IE3 200M Cast iron Foot-mounted

Page 1 of 32
Driver
Qty Description
Nominal voltage: 380 V

Tests
Qty Description
2
Tests
Performance tests
Performance tests : Hydraulic performance test, water; > 10 kW, > 13 HP; ISO 9906:2012 / HI 14.6-2011, Grade 2B
Performance tests : Noise test (for information only)
Performance tests : Vibration test, ISO 5199
Performance tests : Bearing temperature test, 30 minutes, max. 65°C
Material and NDT tests
Material and NDT tests : Material test EN 10204:2004-3.1, wet casting parts and shaft
Structural tests
Structural tests : Impeller balance test EN ISO 1940 Grade 6.3, One Plane
Structural tests : Hydrostatic pressure test EN ISO 5199:2002, 10 minutes
Inspection assembly
Inspection assembly : Final check (documentation, packing, delivery inspection and permission)

Page 2 of 32
 Pump Performance Datasheet
Customer : Globoilsetcore Petroleum Services / Globoil Sulzer Reference ID : EGY.2369-SFI.19.0560-F6
Inquiry Number/ID : Type / Size : A21-65 O
Item TAG number 02-500-0-PA-001A/B Stages :1
Service : Filter Feed Pumps Based on curve number : A21-65_3600_O Rev 1
Quantity :2 Date of Last Update : 27 Jun 2019 09:02
Operating Conditions Liquid
Flow, rated : 125,0 m3/h Liquid type : Water
Differential head / pressure, rated (requested) : 4,00 bar Additional liquid description : Sea Water TDS max 80
Suction pressure, rated / max : 0,00 / 0,00 bar.g 000ppm
NPSH available, rated : Ample Solids diameter, max : 0,00 mm
Frequency : 50 Hz Solids concentration, by volume : 0,00 %
Performance Temperature, rated / max : 20,00 / 20,00 deg C
Speed, rated : 2955 rpm Fluid density, rated / max : 1,030 / 1,030 kg/dm3
Impeller diameter, rated : 185 mm Viscosity, rated : 1,00 cSt
Impeller diameter, maximum : 210 mm Vapor pressure, rated : 0,02 bar.a
Impeller diameter, minimum : 150 mm Material
Efficiency : 76,22 % Material selected : Super Duplex Steel - ASTM
A890 5A (4T / J0267)
NPSH (3% head drop) / margin required : 4,24 / 0,00 m
Pressure Data
Ns (imp. eye flow) / Nss (imp. eye flow) : 1.561 / 10.267 US Units
Maximum casing/bowl working pressure : 4,63 bar.g
MCSF : 3,79 m3/h
Maximum allowable working pressure : 16,00 bar.g
Head, maximum, rated diameter : 4,63 bar
Maximum allowable suction pressure : N/A
Head rise to shutoff : 15,76 %
Hydrostatic test pressure : 24,00 bar.g
Flow, best eff. point : 125,4 m3/h
Driver & Power Data (@Max density)
Flow ratio, rated / BEP : 99,69 %
Driver sizing specification : ISO 5199
Diameter ratio (rated / max) : 88,10 %
Margin over specification : 0,00 %
Head ratio (rated dia / max dia) : 66,46 %
Service factor : 1,00
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1,00 / 1,00 / 1,00 / 1,00
Power, hydraulic : 13,89 kW
Selection status : Acceptable
Power, rated : 18,22 kW
Power, maximum, rated diameter : 20,55 kW
Minimum recommended motor rating : 22,00 kW / 29,50 hp
Hydraulic Performance Acceptance Test: ISO 9906:2012 / HI 14.6-2011 Grade 2B



  
 


 

 

 


 














 

  


  !

 






    




  
"#

Page 3 of 32
Dimensions in mm - NOTE: DO NOT USE FOR CONSTRUCTION UNLESS CERTIFIED

~ 1.540 70,00 min. 145 175

100 500 140 65,00

80,00
24,00
10,00

Ø 32,00 k7

Pump shaft

67,50
700
75,00 1.520
770
~ 1.630

Ø 25,00

Baseplate mounting holes (3 pcs)

MOTOR INFORMATION WEIGHTS TENDER SUMMARY

Power 30,00 kW Pump 90,00 kg Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Frame size 200M Baseplate 85,00 kg Project name Globoil - SWRO 1'320 m3/day
Synchronous speed 3000 rpm Motor 263,0 kg Customer Globoilsetcore Petroleum Services / Globoil
Voltage 380 V TOTAL 438,0 kg Inquiry Number/ID
Frequency 50 Hz Item number 02-500-0-PA-001A/B
Enclosure IP55 FLANGES Date Last Saved 2019-06-20 05:53:28
Size Drilling Service Filter Feed Pumps
PUMP INFORMATION Suction Flange DN100 PN16
Rated speed 2955 rpm Discharge Flange DN65 PN16
Pump Size A21-65 O
No. of Stages 1 General Arrangement Drawing

Page 4 of 32
 Scope of Supply
Customer Globoilsetcore Petroleum Services / Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Globoil
Project Name Globoil - SWRO 1'320 m3/day
Inquiry Number/ID
Item TAG number 02-500-0-PA-002A/B
Application Not specified Type / Size / Stages A11-50 O / 1
Pump speed 2910 rpm

Pump and Accessories

Qty Description
2 A11-50 O
End suction single stage centrifugal pump
Quality Requirement
CE 2006/42/EC
EN ISO 5199:2002 Class II
Pump and accessories
Hydraulic performance acceptance grade
ISO 9906:2012/ HI 14.6-2011 (1-10 kW, 1.3-13 HP)
Impeller
Impeller type: Open
Materials of construction
Volute case : Super duplex steel (ASTM A890 5A)
Impeller : Super duplex steel (ASTM A890 5A)
Shaft: Duplex steel (EN1.4460 / AISI 329 / SS2324)
Bearing housing : Grey cast iron (ASTM A48 CL35B)
Surface treatment
Painting method: Standard, atmospheric-corrosivity C4, ISO 12944-2
Color shade: Light grey (NCS1700)
Volute case
Flange drilling : EN 1092-1 PN16
Shaft seal
Sealing unit type: Cartridge single, throttling seal chamber, sleeve installation (MS34)
Shaft seal fluid: Recirculation flushing
Mechanical seal type: John Crane, SB1 (FD01)
Shaft seal material: C/ SiC
Shaft seal elastomer material: EPDM, Ethylene propylene
Seal flush plan: Similar to Plan 11 (ISO 5199 Designation code 02)
Flush piping type: AVESTA 254 SMO® piping with connectors
Bearing unit
Bearing lubrication type: Oil splash
Bearing isolation: Standard labyrinth seal
Coupling
Metastream TSKS 0013
Coupling guard : Brass
Baseplate
Baseplate type: Standard baseplate for pump and motor (STD)
Baseplate material: Carbon steel
Baseplate equipment: Foundation screw, Grouted
Packing
Packing type: Crate (gap boarded)

Driver
Qty Description
2
Motor
Motor supplier: Motor supplied by Sulzer, mounted by Customer
Motor detail: ABB M3BP 2 poles 11kW IP55 IE3 160M Cast iron Foot-mounted
Nominal voltage: 400 VD

Page 5 of 32
Tests
Qty Description
2
Tests
Performance tests
Performance tests : Hydraulic performance test, water; 1-10 kW, 1.3-13 HP; ISO 9906:2012/ HI 14.6-2011
Performance tests : Noise test (for information only)
Performance tests : Vibration test, ISO 5199
Performance tests : Bearing temperature test, 30 minutes, max. 65°C
Material and NDT tests
Material and NDT tests : Material test EN 10204:2004-3.1, wet casting parts and shaft
Structural tests
Structural tests : Impeller balance test EN ISO 1940 Grade 6.3, One Plane
Structural tests : Hydrostatic pressure test EN ISO 5199:2002, 10 minutes
Inspection assembly
Inspection assembly : Final check (documentation, packing, delivery inspection and permission)

Page 6 of 32
 Pump Performance Datasheet
Customer : Globoilsetcore Petroleum Services / Globoil Sulzer Reference ID : EGY.2369-SFI.19.0560-F6
Inquiry Number/ID : Type / Size : A11-50 O
Item TAG number 02-500-0-PA-002A/B Stages :1
Service : Back wash pump Based on curve number : A11-50_3600_O Rev 1
Quantity :2 Date of Last Update : 27 Jun 2019 09:10
Operating Conditions Liquid
Flow, rated : 70,00 m3/h Liquid type : Water
Differential head / pressure, rated (requested) : 3,10 bar Additional liquid description : Sea Water TDS max 80
Suction pressure, rated / max : 0,00 / 0,00 bar.g 000ppm
NPSH available, rated : Ample Solids diameter, max : 0,00 mm
Frequency : 50 Hz Solids concentration, by volume : 0,00 %
Performance Temperature, rated / max : 20,00 / 20,00 deg C
Speed, rated : 2910 rpm Fluid density, rated / max : 1,030 / 1,030 kg/dm3
Impeller diameter, rated : 165 mm Viscosity, rated : 1,00 cSt
Impeller diameter, maximum : 210 mm Vapor pressure, rated : 0,02 bar.a
Impeller diameter, minimum : 150 mm Material
Efficiency : 67,84 % Material selected : Super Duplex Steel - ASTM
A890 5A (4T / J0267)
NPSH (3% head drop) / margin required : 3,14 / 0,00 m
Pressure Data
Ns (imp. eye flow) / Nss (imp. eye flow) : 1.224 / 9.801 US Units
Maximum casing/bowl working pressure : 3,63 bar.g
MCSF : 3,52 m3/h
Maximum allowable working pressure : 16,00 bar.g
Head, maximum, rated diameter : 3,63 bar
Maximum allowable suction pressure : N/A
Head rise to shutoff : 16,98 %
Hydrostatic test pressure : 24,00 bar.g
Flow, best eff. point : 71,10 m3/h
Driver & Power Data (@Max density)
Flow ratio, rated / BEP : 98,45 %
Driver sizing specification : ISO 5199
Diameter ratio (rated / max) : 78,57 %
Margin over specification : 0,00 %
Head ratio (rated dia / max dia) : 49,58 %
Service factor : 1,00
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1,00 / 1,00 / 1,00 / 1,00
Power, hydraulic : 6,03 kW
Selection status : Acceptable
Power, rated : 8,89 kW
Power, maximum, rated diameter : 9,71 kW
Minimum recommended motor rating : 11,00 kW / 14,75 hp
Hydraulic Performance Acceptance Test: ISO 9906:2012 / HI 14.6-2011 (1-10 kW, 1.34-13.4 HP)



 
  

 





 





 


 







 


 





  !

  



        







"#

Page 7 of 32
Dimensions in mm - NOTE: DO NOT USE FOR CONSTRUCTION UNLESS CERTIFIED

~ 1.220 45,00 min. 140 160

100 385 100 50,00

50,00
24,00
8,00

Ø 24,00 k7

Pump shaft

60,00
600
50,00 1.050
670
~ 1.135

Ø 20,00

Baseplate mounting holes (3 pcs)

MOTOR INFORMATION WEIGHTS TENDER SUMMARY

Power 11,00 kW Pump 66,00 kg Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Frame size 160M Baseplate 60,00 kg Project name Globoil - SWRO 1'320 m3/day
Synchronous speed 3000 rpm Motor 144,0 kg Customer Globoilsetcore Petroleum Services / Globoil
Voltage 400 VD TOTAL 270,0 kg Inquiry Number/ID
Frequency 50 Hz Item Tag Number 02-500-0-PA-002A/B
Enclosure IP55 FLANGES Date Last Saved 2019-06-27 06:03:14
Size Drilling Service Back wash pump
PUMP INFORMATION Suction Flange DN80 PN16
Rated speed 2910 rpm Discharge Flange DN50 PN16
Pump Size A11-50 O
No. of Stages 1 General Arrangement Drawing

Page 8 of 32
 Scope of Supply
Customer Globoilsetcore Petroleum Services / Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Globoil
Project Name Globoil - SWRO 1'320 m3/day
Inquiry Number/ID
Item TAG number 02-500-0-PA-003A/B
Application Not specified Type / Size / Stages MBN50-215 / 8
Pump speed 2802 rpm

Pump and Accessories

Qty Description
4 MBN50-215 / 8
Bareshaft pump
Pump design type: Standard
Pump scope
Quality requirement: CE (2006/42/EC)
Hydraulic performance acceptance grade
ISO 9906:2012 / HI 14.6-2011 Grade 2B
Guaranteed efficiency
Pump material options
Casing material: 4T / J0267 ASTM A890 5A - Super Duplex SS
Wet end options
Temperature range: Normal (under 100 C or 212 F)
Sealing method
Mechanical seal
Mechanical seal fitting: Single, Throttle (MS12)
Mechanical seal type: John Crane Safematic, JCS1FM
Mechanical seal material (seal faces, body, elastomers): SiC/C-(Super Duplex)-EPDM (04)
Seal piping plan: Similar to plan 11
Seal piping material: 254 SMO Tubing
Bearing unit options
Lubrication: Oil
Assembly
Baseplate
Baseplate type: For pump & motor, steel, painted (NP)
Foundation screw type: Grouted
Coupling
Coupling style: Non-Spacer
Coupling manufacturer: N-Eupex A/B
Coupling size: N-Eupex NEA/B-A180
Coupling guard: Brass (70)
Packaging of pump and parts
Packaging: Seaworthy packaging (closed crate)
Testing, Certificates, Painting, and Documentation
Painting/Outside surfacing
Painting method: Standard, Corrosivity C4 (NZ), N31047
Paint color: NCS1700
Warranty
Warranty: standard 12 months

Driver
Qty Description
4 Driver
Motor details
Motor details: ABB M3BP 2poles 132kW IE3 IP55 IEC 315S Cast iron Foot-mounting
Nominal voltage: 380 V
Additional items
Additional items: 701: Insulated bearing at N-end
Additional items: 704: EMC cable gland

Page 9 of 32
Tests
Qty Description
Tests
3 EN 10204:2004-3.1(EN31)
Balancing Test (Grade 6.3, 1-Plane), certificate included
Hydrostatic Test, certificate included (ST05)
Hydraulic performance test, water ISO 9906:2012/HI 14.6-2011 Grade 2B (PT09)
Noise Test (PT04)
Vibration Test (PT05)
Bearing Temperature Test (30 min) (PT06)
Adders for test prices
Adders for test prices: Witnessed adder for Optional Performace Tests

Page 10 of 32
 Pump Performance Datasheet
Customer : Globoilsetcore Petroleum Services / Globoil Sulzer Reference ID : EGY.2369-SFI.19.0560-F6
Inquiry Number/ID : Type / Size : MBN50-215
Item TAG number 02-500-0-PA-003A/B/C Stages :8
Service : High pressure pump Based on curve number : K06959 Rev 1
Quantity :4
Operating Conditions Liquid
Flow, rated : 56,00 m3/h Liquid type : Water
Differential head / pressure, rated (requested) : 45,00 bar Additional liquid description : Sea Water TDS max 80
Suction pressure, rated / max : 0,00 / 0,00 bar.g 000ppm
NPSH available, rated : Ample Solids diameter, max : 0,00 mm
Frequency : 50 Hz Solids concentration, by volume : 0,00 %
Performance Temperature, rated / max : 20,00 / 20,00 deg C
Speed, rated : 2802 rpm Fluid density, rated / max : 1,030 / 1,030 kg/dm3
Impeller diameter, rated : 210 mm Viscosity, rated : 1,00 cSt
Impeller diameter, maximum : 215 mm Vapor pressure, rated : 0,02 bar.a
Impeller diameter, minimum : 185 mm Material
Efficiency : 72,44 % Material selected : 4T / J0267 ASTM A890 5A -
Super Duplex SS
NPSH (3% head drop) / margin required : 2,18 / 0,00 m
Pressure Data
Ns (imp. eye flow) / Nss (imp. eye flow) : 1.071 / 9.524 US Units
Maximum casing/bowl working pressure : 49,99 bar.g
MCSF : 15,33 m3/h
Maximum allowable working pressure : 63,00 bar.g
Head, maximum, rated diameter : 49,99 bar
Maximum allowable suction pressure : 10,00 bar.g
Head rise to shutoff : 11,03 %
Hydrostatic test pressure : 94,50 bar.g
Flow, best eff. point : 71,60 m3/h
Driver & Power Data (@Max density)
Flow ratio, rated / BEP : 78,21 %
Driver sizing specification : ISO 5199
Diameter ratio (rated / max) : 97,67 %
Margin over specification : 0,00 %
Head ratio (rated dia / max dia) : 94,79 %
Service factor : 1,00
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1,00 / 1,00 / 1,00 / 1,00
Power, hydraulic : 70,03 kW
Selection status : Acceptable
Power, rated : 96,68 kW
Power, maximum, rated diameter : 117 kW
Minimum recommended motor rating : 132 kW / 177 hp
Hydraulic Performance Acceptance Test: ISO 9906:2012 / HI 14.6-2011 Grade 2B



  
 

 
 





















 



  


!

  
 






  
        
" 
#

Page 11 of 32
Dimensions in mm - NOTE: DO NOT USE FOR CONSTRUCTION UNLESS CERTIFIED
2.620 115min
170 652 565
PUMP SHAFT
50,00 100 5,00
14,00

-
48,00 k7

65,00 520
2.400 680
Baseplate Additional fixing holes are not used when
fixing holes number of stages is from : 3 - 8
Ø 36,00

Baseplate
fixing hole
o Ø 36,00

o
Flange Orientation

612 965
1 2 3 4 5 6 7 8 9
2.280

MOTOR INFORMATION WEIGHTS TENDER SUMMARY

Power 132 kW Pump 497,0 kg Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Frame size 315S Baseplate 218,0 kg Project name Globoil - SWRO 1'320 m3/day
Synchronous speed 3000 rpm Motor 965,0 kg Customer Globoilsetcore Petroleum Services / Globoil
Voltage 380 V TOTAL 1.680,0 kg Inquiry Number/ID
Frequency VSD Item Tag Number 02-500-0-PA-003A/B
Enclosure IP55 FLANGES Date Last Saved 2019-08-27 07:30:27
Size Drilling Service High pressure pump
PUMP INFORMATION Suction Flange 100 EN_PN10
Rated speed 2802rpm Discharge Flange 50,00 EN_PN63
Pump Size MBN50-215
No. of Stages 8 General Arrangement Drawing

Page 12 of 32
 Scope of Supply
Customer Globoilsetcore Petroleum Services / Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Globoil
Project Name Globoil - SWRO 1'320 m3/day
Inquiry Number/ID
Item TAG number 02-500-0-PA-006A/B
Application Not specified Type / Size / Stages A23-50-S O / 1
Pump speed 2950 rpm

Pump and Accessories

Qty Description
2 A23-50-S O
End suction single stage centrifugal pump with S design liquid ring pump
Quality Requirement
CE 2006/42/EC
EN ISO 5199:2002 Class II
Pump and accessories
Hydraulic performance acceptance grade
ISO 9906:2012 / HI 14.6-2011 Grade 2B
Impeller
Impeller type: Open
Materials of construction
Volute case : Super duplex steel (ASTM A890 5A)
Impeller : Super duplex steel (ASTM A890 5A)
Shaft: Duplex steel (EN1.4460 / AISI 329 / SS2324)
Bearing housing : Grey cast iron (ASTM A48 CL35B)
Surface treatment
Painting method: Standard, atmospheric-corrosivity C4, ISO 12944-2
Color shade: Light grey (NCS1700)
Volute case
Flange drilling : EN 1092-1 PN16
Shaft seal
S design liquid ring pump: Element single mechanical seal
Shaft seal fluid: Recirculation flushing
Mechanical seal type: John Crane, T680/ L, DIN 24960 KU (FC01)
Shaft seal material: SiC/ SiC
Flush piping type: AVESTA 254 SMO® piping with connectors
Bearing unit
Bearing lubrication type: Oil splash
Bearing isolation: Standard labyrinth seal
Coupling
Metastream TSKS 0075
Coupling guard : Brass
Baseplate
Baseplate type: Standard baseplate for pump and motor (STD)
Baseplate material: Carbon steel
Baseplate equipment: Foundation screw, Grouted
Packing
Packing type: Seaworthy packing, Case

Driver
Qty Description
2
Motor
Motor supplier: Motor supplied by Sulzer, mounted by Customer
Motor detail: ABB M3BP 2 poles 75kW IP55 IE3 280S Cast iron Foot-mounted
Nominal voltage: 400 VD

Page 13 of 32
Tests
Qty Description
2
Tests
Performance tests
Performance tests : Hydraulic performance test, water; > 10 kW, > 13 HP; ISO 9906:2012 / HI 14.6-2011, Grade 2B
Performance tests : Noise test (for information only)
Performance tests : Vibration test, ISO 5199
Performance tests : Bearing temperature test, 30 minutes, max. 65°C
Material and NDT tests
Material and NDT tests : Material test EN 10204:2004-3.1, wet casting parts and shaft
Structural tests
Structural tests : Impeller balance test EN ISO 1940 Grade 6.3, One Plane
Structural tests : Hydrostatic pressure test EN ISO 5199:2002, 10 minutes
Inspection assembly
Inspection assembly : Final check (documentation, packing, delivery inspection and permission)

Page 14 of 32
 Pump Performance Datasheet
Customer : Globoilsetcore Petroleum Services / Globoil Sulzer Reference ID : EGY.2369-SFI.19.0560-F6
Inquiry Number/ID : Type / Size : A23-50-S O
Item TAG number 02-500-0-PA-006A/B Stages :1
Service : Reject pump Based on curve number : A23-50_3000_O Rev 1
Quantity :2
Operating Conditions Liquid
Flow, rated : 75,00 m3/h Liquid type : Water
Differential head / pressure, rated (requested) : 13,00 bar Additional liquid description : Sea Water TDS max 80
Suction pressure, rated / max : 0,00 / 0,00 bar.g 000ppm. MAX SUCTION 3M
NPSH available, rated : Ample Solids diameter, max : 0,00 mm
Frequency : 50 Hz Solids concentration, by volume : 0,00 %
Performance Temperature, rated / max : 20,00 / 35,00 deg C
Speed, rated : 2950 rpm Fluid density, rated / max : 1,030 / 1,030 kg/dm3
Impeller diameter, rated : 300 mm Viscosity, rated : 1,00 cSt
Impeller diameter, maximum : 330 mm Vapor pressure, rated : 0,02 bar.a
Impeller diameter, minimum : 210 mm Material
Efficiency : 50,72 % Material selected : Super Duplex Steel - ASTM
A890 5A (4T / J0267)
NPSH (3% head drop) / margin required : 2,11 / 0,00 m
Pressure Data
nq (imp. eye flow) / S (imp. eye flow) : 12 / 227 Metric units
Maximum casing/bowl working pressure : 14,55 bar.g
MCSF : 11,18 m3/h
Maximum allowable working pressure : 16,00 bar.g
Head, maximum, rated diameter : 14,55 bar
Maximum allowable suction pressure : N/A
Head rise to shutoff : 11,88 %
Hydrostatic test pressure : 24,00 bar.g
Flow, best eff. point : 97,38 m3/h
Driver & Power Data (@Max density)
Flow ratio, rated / BEP : 77,02 %
Driver sizing specification : ISO 5199
Diameter ratio (rated / max) : 90,91 %
Margin over specification : 0,00 %
Head ratio (rated dia / max dia) : 76,91 %
Service factor : 1,00
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1,00 / 1,00 / 1,00 / 1,00
Power, hydraulic : 27,08 kW
Selection status : Acceptable
Power, rated : 53,40 kW
Power, maximum, rated diameter : 67,00 kW
Minimum recommended motor rating : 75,00 kW / 101 hp
Hydraulic Performance Acceptance Test: ISO 9906:2012 / HI 14.6-2011 Grade 2B






 
 

  





 
 






 



 


 


  





 






 
          
    
! "

Page 15 of 32
Dimensions in mm - NOTE: DO NOT USE FOR CONSTRUCTION UNLESS CERTIFIED

~ 1.800 100 min. 205 210

125 500 140 50,00

80,00
24,00
10,00

Ø 32,00 k7

Pump shaft

67,50
700
75,00 1.790
770
~ 1.900

Ø 25,00

Baseplate mounting holes (3 pcs)

MOTOR INFORMATION WEIGHTS TENDER SUMMARY

Power 75,00 kW Pump 140,0 kg Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Frame size 280S Baseplate 125,0 kg Project name Globoil - SWRO 1'320 m3/day
Synchronous speed 3000 rpm Motor 665,0 kg Customer Globoilsetcore Petroleum Services / Globoil
Voltage 400 VD TOTAL 930,0 kg Inquiry Number/ID
Frequency 50 Hz Item Tag Number 02-500-0-PA-006A/B
Enclosure IP55 FLANGES Date Last Saved 2019-06-27 06:15:37
Size Drilling Service Reject pump
PUMP INFORMATION Suction Flange DN80 PN16
Rated speed 2950 rpm Discharge Flange DN50 PN16
Pump Size A23-50-S O
No. of Stages 1 General Arrangement Drawing

Page 16 of 32
 Scope of Supply
Customer Globoilsetcore Petroleum Services / Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Globoil
Project Name Globoil - SWRO 1'320 m3/day Inquiry Date
Inquiry Number/ID Bid Submitted Date
Item TAG number 02-500-0-PA-004A/B Date Last Saved 27 Jun 2019 09:18
Application Not specified Type / Size / Stages A11-50 O / 1
Pump speed 2910 rpm

Pump and Accessories

Qty Description
2 A11-50 O
End suction single stage centrifugal pump
Quality Requirement
CE 2006/42/EC
EN ISO 5199:2002 Class II
Pump and accessories
Hydraulic performance acceptance grade
ISO 9906:2012/ HI 14.6-2011 (1-10 kW, 1.3-13 HP)
Impeller
Impeller type: Open
Materials of construction
Volute case : Super duplex steel (ASTM A890 5A)
Impeller : Super duplex steel (ASTM A890 5A)
Shaft: Duplex steel (EN1.4460 / AISI 329 / SS2324)
Bearing housing : Grey cast iron (ASTM A48 CL35B)
Surface treatment
Painting method: Standard, atmospheric-corrosivity C4, ISO 12944-2
Color shade: Light grey (NCS1700)
Volute case
Flange drilling : EN 1092-1 PN16
Shaft seal
Sealing unit type: Cartridge single, throttling seal chamber, sleeve installation (MS34)
Shaft seal fluid: Recirculation flushing
Mechanical seal type: John Crane, SB1 (FD01)
Shaft seal material: C/ SiC
Shaft seal elastomer material: EPDM, Ethylene propylene
Seal flush plan: Similar to Plan 11 (ISO 5199 Designation code 02)
Flush piping type: AVESTA 254 SMO® piping with connectors
Bearing unit
Bearing lubrication type: Oil splash
Bearing isolation: Standard labyrinth seal
Coupling
Metastream TSKS 0013
Coupling guard : Brass
Baseplate
Baseplate type: Standard baseplate for pump and motor (STD)
Baseplate material: Carbon steel
Baseplate equipment: Foundation screw, Grouted
Packing
Packing type: Crate (gap boarded)

Driver
Qty Description
2
Motor
Motor detail: ABB M3BP 2 poles 15kW IP55 IE3 160M Cast iron Foot-mounted
Nominal voltage: 002: Restamp voltage
380 V

Page 17 of 32
Tests
Qty Description
2
Tests
Performance tests
Performance tests : Hydraulic performance test, water; 1-10 kW, 1.3-13 HP; ISO 9906:2012/ HI 14.6-2011
Performance tests : Noise test (for information only)
Performance tests : Vibration test, ISO 5199
Performance tests : Bearing temperature test, 30 minutes, max. 65°C
Material and NDT tests
Material and NDT tests : Material test EN 10204:2004-3.1, wet casting parts and shaft
Structural tests
Structural tests : Impeller balance test EN ISO 1940 Grade 6.3, One Plane
Structural tests : Hydrostatic pressure test EN ISO 5199:2002, 10 minutes
Inspection assembly
Inspection assembly : Final check (documentation, packing, delivery inspection and permission)

Page 18 of 32
 Pump Performance Datasheet
Customer : Globoilsetcore Petroleum Services / Globoil Sulzer Reference ID : EGY.2369-SFI.19.0560-F6
Inquiry Number/ID : Type / Size : A11-50 O
Item TAG number 02-500-0-PA-004A/B Stages :1
Service: Chemical cleaning / flushing pump Based on curve number : A11-50_3600_O Rev 1
Quantity :2
Operating Conditions Liquid
Flow, Normal/rate : 56,00/65,00 m3/h Liquid type : Other
Differential head / pressure, rated (requested) : 4,15 bar Additional liquid description : Chemical solution
Suction pressure, rated / max : 0,00 / 0,00 bar.g Solids diameter, max : 0,00 mm
NPSH available, rated : Ample Solids concentration, by volume : 0,00 %
Frequency : 50 Hz Temperature, rated / max : 20,00 / 30,00 deg C
Performance Fluid density, rated / max : 1,000 / 1,000 kg/dm3
Speed, rated : 2910 rpm Viscosity, rated : 1,00 cSt
Impeller diameter, rated : 180,0 mm Vapor pressure, rated : 0,00 bar.a
Impeller diameter, maximum : 210,0 mm Material
Impeller diameter, minimum : 150,0 mm Material selected : Super Duplex Steel - ASTM
Efficiency : 65,3 % A890 5A (4T / J0267)
NPSH (3% head drop) / margin required : 2,48 / 0,00 m Pressure Data
Ns (imp. eye flow) / Nss (imp. eye flow) : 1.224 / 9.801 US Units Maximum casing/bowl working pressure : 4,38 bar.g
MCSF : 4,02 m3/h Maximum allowable working pressure : 16,00 bar.g
Head, maximum, rated diameter : 4,38 bar Maximum allowable suction pressure : N/A
Head rise to shutoff : 5,59 % Hydrostatic test pressure : 24,00 bar.g
Flow, best eff. point : 81,66 m3/h Driver & Power Data (@Max density)
Driver sizing specification : ISO 5199
Flow ratio, rated / BEP : 68,58 %
Margin over specification : 0,00 %
Diameter ratio (rated / max) : 85,71 %
Service factor : 1,00
Head ratio (rated dia / max dia) : 67,04 %
Power, hydraulic : 6,46 kW
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1,00 / 1,00 / 1,00 / 1,00
Power, rated : 9,89 kW
Selection status : Acceptable
Power, maximum, rated diameter : 13,59 kW
Minimum recommended motor rating : 15,00 kW / 20,12 hp
Hydraulic Performance Acceptance Test: ISO 9906:2012 / HI 14.6-2011 (1-10 kW, 1.34-13.4 HP)


 

  

 

 


 








 








 

  





  !

 





        








"#

Page 19 of 32
Dimensions in mm - NOTE: DO NOT USE FOR CONSTRUCTION UNLESS CERTIFIED

~ 1.220,0 45,00 min. 140,0 160,0

100,0 385,0 100,0 50,00

50,00
24,00
8,00

Ø 24,00 k7

Pump shaft

60,00
600,0
50,00 1.050,0
670,0
~ 1.135,0

Ø 20,00

Baseplate mounting holes (3 pcs)

MOTOR INFORMATION WEIGHTS TENDER SUMMARY

Power 15,00 kW Pump 66,00 kg Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Frame size 160M Baseplate 60,00 kg Project name Globoil - SWRO 1'320 m3/day
Synchronous speed 3000 rpm Motor 152,0 kg Customer Globoilsetcore Petroleum Services / Globoil
Voltage 002: Restamp voltage 380 V TOTAL 278,0 kg Inquiry Number/ID
Frequency 50 Hz Item Tag Number 02-500-0-PA-004A/B
Enclosure IP55 FLANGES Date Last Saved 2019-06-27 06:15:44
Size Drilling Service Clemical cleaning / flushing pump
PUMP INFORMATION Suction Flange DN80 PN16
Rated speed 2910 rpm Discharge Flange DN50 PN16
Pump Size A11-50 O
No. of Stages 1 General Arrangement Drawing

Page 20 of 32
 Scope of Supply
Customer Globoilsetcore Petroleum Services / Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Globoil
Project Name Globoil - SWRO 1'320 m3/day Inquiry Date
Inquiry Number/ID Bid Submitted Date
Item TAG number 02-500-0-PA-005A/B Date Last Saved 27 Jun 2019 09:20
Application Not specified Type / Size / Stages A11-50 O / 1
Pump speed 2910 rpm

Pump and Accessories

Qty Description
2 A11-50 O
End suction single stage centrifugal pump
Quality Requirement
CE 2006/42/EC
EN ISO 5199:2002 Class II
Pump and accessories
Hydraulic performance acceptance grade
ISO 9906:2012/ HI 14.6-2011 (1-10 kW, 1.3-13 HP)
Impeller
Impeller type: Open
Materials of construction
Volute case : Super duplex steel (ASTM A890 5A)
Impeller : Super duplex steel (ASTM A890 5A)
Shaft: Duplex steel (EN1.4460 / AISI 329 / SS2324)
Bearing housing : Grey cast iron (ASTM A48 CL35B)
Surface treatment
Painting method: Standard, atmospheric-corrosivity C4, ISO 12944-2
Color shade: Light grey (NCS1700)
Volute case
Flange drilling : EN 1092-1 PN16
Shaft seal
Sealing unit type: Cartridge single, throttling seal chamber, sleeve installation (MS34)
Shaft seal fluid: Recirculation flushing
Mechanical seal type: John Crane, SB1 (FD01)
Shaft seal material: C/ SiC
Shaft seal elastomer material: EPDM, Ethylene propylene
Seal flush plan: Similar to Plan 11 (ISO 5199 Designation code 02)
Flush piping type: AVESTA 254 SMO® piping with connectors
Bearing unit
Bearing lubrication type: Oil splash
Bearing isolation: Standard labyrinth seal
Coupling
Metastream TSKS 0013
Coupling guard : Brass
Baseplate
Baseplate type: Standard baseplate for pump and motor (STD)
Baseplate material: Carbon steel
Baseplate equipment: Foundation screw, Grouted
Packing
Packing type: Crate (gap boarded)

Driver
Qty Description
2
Motor
Motor detail: ABB M3BP 2 poles 15kW IP55 IE3 160M Cast iron Foot-mounted
Nominal voltage: 002: Restamp voltage
380 V

Page 21 of 32
Tests
Qty Description
2
Tests
Performance tests
Performance tests : Hydraulic performance test, water; 1-10 kW, 1.3-13 HP; ISO 9906:2012/ HI 14.6-2011
Performance tests : Noise test (for information only)
Performance tests : Vibration test, ISO 5199
Performance tests : Bearing temperature test, 30 minutes, max. 65°C
Material and NDT tests
Material and NDT tests : Material test EN 10204:2004-3.1, wet casting parts and shaft
Structural tests
Structural tests : Impeller balance test EN ISO 1940 Grade 6.3, One Plane
Structural tests : Hydrostatic pressure test EN ISO 5199:2002, 10 minutes
Inspection assembly
Inspection assembly : Final check (documentation, packing, delivery inspection and permission)

Page 22 of 32
 Pump Performance Datasheet
Customer : Globoilsetcore Petroleum Services / Globoil Sulzer Reference ID : EGY.2369-SFI.19.0560-F6
Inquiry Number/ID : Type / Size : A11-50 O
Item TAG number 02-500-0-PA-005A/B Stages :1
Service : Product transfer Pump Based on curve number : A11-50_3600_O Rev 1
Quantity :2 Date of Last Update : 27 Jun 2019 09:20
Operating Conditions Liquid
Flow, rated : 65,00 m3/h Liquid type : Other
Differential head / pressure, rated (requested) : 3,70 bar Additional liquid description : Sea Water TDS max 80
Suction pressure, rated / max : 0,00 / 0,00 bar.g 000ppm
NPSH available, rated : Ample Solids diameter, max : 0,00 mm
Frequency : 50 Hz Solids concentration, by volume : 0,00 %
Performance Temperature, rated / max : 20,00 / 30,00 deg C
Speed, rated : 2910 rpm Fluid density, rated / max : 1,000 / 1,000 kg/dm3
Impeller diameter, rated : 175,0 mm Viscosity, rated : 1,00 cSt
Impeller diameter, maximum : 210,0 mm Vapor pressure, rated : 0,00 bar.a
Impeller diameter, minimum : 150,0 mm Material
Efficiency : 68,2 % Material selected : Super Duplex Steel - ASTM
A890 5A (4T / J0267)
NPSH (3% head drop) / margin required : 2,83 / 0,00 m
Pressure Data
Ns (imp. eye flow) / Nss (imp. eye flow) : 1.224 / 9.801 US Units
Maximum casing/bowl working pressure : 4,05 bar.g
MCSF : 3,83 m3/h
Maximum allowable working pressure : 16,00 bar.g
Head, maximum, rated diameter : 4,05 bar
Maximum allowable suction pressure : N/A
Head rise to shutoff : 9,44 %
Hydrostatic test pressure : 24,00 bar.g
Flow, best eff. point : 77,69 m3/h
Driver & Power Data (@Max density)
Flow ratio, rated / BEP : 83,67 %
Driver sizing specification : ISO 5199
Diameter ratio (rated / max) : 83,33 %
Margin over specification : 0,00 %
Head ratio (rated dia / max dia) : 60,48 %
Service factor : 1,00
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1,00 / 1,00 / 1,00 / 1,00
Power, hydraulic : 6,68 kW
Selection status : Acceptable
Power, rated : 9,80 kW
Power, maximum, rated diameter : 11,96 kW
Minimum recommended motor rating : 15,00 kW / 20,12 hp
Hydraulic Performance Acceptance Test: ISO 9906:2012 / HI 14.6-2011 (1-10 kW, 1.34-13.4 HP)


 

  


 

 


 








 








 


 





  !

  




        







"#

Page 23 of 32
Dimensions in mm - NOTE: DO NOT USE FOR CONSTRUCTION UNLESS CERTIFIED

~ 1.220,0 45,00 min. 140,0 160,0

100,0 385,0 100,0 50,00

50,00
24,00
8,00

Ø 24,00 k7

Pump shaft

60,00
600,0
50,00 1.050,0
670,0
~ 1.135,0

Ø 20,00

Baseplate mounting holes (3 pcs)

MOTOR INFORMATION WEIGHTS TENDER SUMMARY

Power 15,00 kW Pump 66,00 kg Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Frame size 160M Baseplate 60,00 kg Project name Globoil - SWRO 1'320 m3/day
Synchronous speed 3000 rpm Motor 152,0 kg Customer Globoilsetcore Petroleum Services / Globoil
Voltage 002: Restamp voltage 380 V TOTAL 278,0 kg Inquiry Number/ID
Frequency 50 Hz Item Tag Number 02-500-0-PA-005A/B
Enclosure IP55 FLANGES Date Last Saved 2019-06-27 06:19:38
Size Drilling Service Product transfer Pump
PUMP INFORMATION Suction Flange DN80 PN16
Rated speed 2910 rpm Discharge Flange DN50 PN16
Pump Size A11-50 O
No. of Stages 1 General Arrangement Drawing

Page 24 of 32
 Scope of Supply
Customer Globoilsetcore Petroleum Services / Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Globoil
Project Name Globoil - SWRO 1'320 m3/day Inquiry Date
Inquiry Number/ID Bid Submitted Date
Item TAG number 02-500-0-PA-007A/B Date Last Saved 27 Jun 2019 15:30
Application Not specified Type / Size / Stages A11-32-S O / 1
Pump speed 2910 rpm

Pump and Accessories

Qty Description
2 A11-32-S O
End suction single stage centrifugal pump with S design liquid ring pump
Quality Requirement
CE 2006/42/EC
EN ISO 5199:2002 Class II
Pump and accessories
Hydraulic performance acceptance grade
ISO 9906:2012/ HI 14.6-2011 (1-10 kW, 1.3-13 HP)
Impeller
Impeller type: Open
Materials of construction
Volute case : Super duplex steel (ASTM A890 5A)
Impeller : Super duplex steel (ASTM A890 5A)
Shaft: Duplex steel (EN1.4460 / AISI 329 / SS2324)
Bearing housing : Grey cast iron (ASTM A48 CL35B)
Surface treatment
Painting method: Standard, atmospheric-corrosivity C4, ISO 12944-2
Color shade: Light grey (NCS1700)
Volute case
Flange drilling : EN 1092-1 PN16
Shaft seal
S design liquid ring pump: Element single mechanical seal
Shaft seal fluid: Recirculation flushing
Mechanical seal type: John Crane, T680/ L, DIN 24960 KU (FC01)
Shaft seal material: SiC/ SiC
Flush piping type: AVESTA 254 SMO® piping with connectors
Bearing unit
Bearing lubrication type: Oil splash
Bearing isolation: Standard labyrinth seal
Coupling
Metastream TSKS 0013
Coupling guard : Brass
Baseplate
Baseplate type: Standard baseplate for pump and motor (STD)
Baseplate material: Carbon steel
Baseplate equipment: Foundation screw, Grouted
Packing
Packing type: Seaworthy packing, Case

Driver
Qty Description
2
Motor
Motor detail: ABB M3BP 2 poles 7,5kW IP55 IE3 132S Cast iron Foot-mounted
Nominal voltage: 400 VD

Page 29 of 32
Tests
Qty Description
2
Tests
Performance tests
Performance tests : Hydraulic performance test, water; 1-10 kW, 1.3-13 HP; ISO 9906:2012/ HI 14.6-2011
Performance tests : Noise test (for information only)
Performance tests : Vibration test, ISO 5199
Performance tests : Bearing temperature test, 30 minutes, max. 65°C
Material and NDT tests
Material and NDT tests : Material test EN 10204:2004-3.1, wet casting parts and shaft
Structural tests
Structural tests : Impeller balance test EN ISO 1940 Grade 6.3, One Plane
Structural tests : Hydrostatic pressure test EN ISO 5199:2002, 10 minutes
Inspection assembly
Inspection assembly : Final check (documentation, packing, delivery inspection and permission)

Page 30 of 32
 Pump Performance Datasheet
Customer : Globoilsetcore Petroleum Services / Globoil Sulzer Reference ID : EGY.2369-SFI.19.0560-F6
Inquiry Number/ID : Type / Size : A11-32-S O
Item TAG number 02-500-0-PA-007A/B Stages :1
Service : Dirty water pump Based on curve number : A11-32_3600_O Rev 1
Quantity :2 Date of Last Update : 27 Jun 2019 15:30
Operating Conditions Liquid
Flow, Normal/rate : 10,00/11,00 m3/h Liquid type : Water
Differential head / pressure, rated (requested) : 3,50 bar Additional liquid description : Sea Water TDS max 80 000
Suction pressure, rated / max : 0,00 / 0,00 bar.g ppm, MAX SUCTION 2,5m
NPSH available, rated : Ample Solids diameter, max : 0,00 mm
Frequency : 50 Hz Solids concentration, by volume : 0,00 %
Performance Temperature, rated / max : 20,00 / 20,00 deg C
Speed, rated : 2910 rpm Fluid density, rated / max : 0,998 / 0,998 kg/dm3
Impeller diameter, rated : 163 mm Viscosity, rated : 1,00 cSt
Impeller diameter, maximum : 210 mm Vapor pressure, rated : 0,02 bar.a
Impeller diameter, minimum : 150 mm Material
Efficiency : 21,13 % Material selected : Super Duplex Steel - ASTM
A890 5A (4T / J0267)
NPSH (3% head drop) / margin required : 1,04 / 0,00 m
Pressure Data
nq (imp. eye flow) / S (imp. eye flow) : 14 / 163 Metric units
Maximum casing/bowl working pressure : 3,64 bar.g
MCSF : 1,16 m3/h
Maximum allowable working pressure : 16,00 bar.g
Head, maximum, rated diameter : 3,64 bar
Maximum allowable suction pressure : N/A
Head rise to shutoff : 4,11 %
Hydrostatic test pressure : 24,00 bar.g
Flow, best eff. point : 24,37 m3/h
Driver & Power Data (@Max density)
Flow ratio, rated / BEP : 41,03 %
Driver sizing specification : ISO 5199
Diameter ratio (rated / max) : 77,38 %
Margin over specification : 0,00 %
Head ratio (rated dia / max dia) : 52,45 %
Service factor : 1,00
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1,00 / 1,00 / 1,00 / 1,00
Power, hydraulic : 0,97 kW
Selection status : Acceptable
Power, rated : 4,60 kW
Power, maximum, rated diameter : 6,58 kW
Minimum recommended motor rating : 7,50 kW / 10,06 hp
Hydraulic Performance Acceptance Test: ISO 9906:2012 / HI 14.6-2011 (1-10 kW, 1.34-13.4 HP)
 

 
 



 

 


 





 


 







 


 


  
 




      
!"

Page 31 of 32
Dimensions in mm - NOTE: DO NOT USE FOR CONSTRUCTION UNLESS CERTIFIED

~ 1.070 40,00 min. 135 140

80,00 385 100 32,00

50,00
20,00
8,00

Ø 24,00 k7

Pump shaft

60,00
600
50,00 1.050
670
~ 1.135

Ø 20,00

Baseplate mounting holes (3 pcs)

MOTOR INFORMATION WEIGHTS TENDER SUMMARY

Power 7,50 kW Pump 64,00 kg Sulzer Reference ID EGY.2369-SFI.19.0560-F6
Frame size 132S Baseplate 50,00 kg Project name Globoil - SWRO 1'320 m3/day
Synchronous speed 3000 rpm Motor 75,00 kg Customer Globoilsetcore Petroleum Services / Globoil
Voltage 400 VD TOTAL 189,0 kg Inquiry Number/ID
Frequency 50 Hz Item Tag Number 02-500-0-PA-007A/B
Enclosure IP55 FLANGES Date Last Saved 2019-06-27 06:21:26
Size Drilling Service Dirty water pump
PUMP INFORMATION Suction Flange DN50 PN16
Rated speed 2910 rpm Discharge Flange DN32 PN16
Pump Size A11-32-S O
No. of Stages 1 General Arrangement Drawing

Page 32 of 32