CA1300PD

Single drum vibratory

rollers

TECHNICAL DATA
MASSES ENGINE
Operating mass (incl. ROPS) 4750 kg Kubota V 3307 CR-TE4 (Stage IIIB/
Manufacturer/Model
Tier4)
Operating mass (incl. Cab) 4900 kg
Type Water cooled turbo Diesel
Module mass (front/rear) 2000 kg/2750 kg
Rated power, SAE
Max. operating mass 5350 kg 55 kW (75 hp) @ 2,200 rpm
J1995
Fuel tank capacity 117 l
COMPACTION
Nominal amplitude 1.5 mm ENGINE
Vibration frequency 35 Hz Manufacturer/Model Kubota V 3307 CR-TE5 (Stage V)
Centrifugal force 89 kN Type Water cooled turbo Diesel
Frequency ECO: 30 Hz Rated power, SAE J1995 55 kW (75 hp ) @ 2,200 rpm
Fuel tank capacity 117 l
TRACTION
Speed range (Dual/TC/AS) 0 -6 km/h ENGINE
Tyre size (10 ply) 12.5-20 Yanmar 4TNV98CT-PDCE (Stage V /
Manufacturer/Model
Max. theoretical gradeability 52 % Tier 4f)

Vertical oscillation ±9 Type Water cooled turbo Diesel

Number of pads 72 Rated power, SAE

54 kW (72 hp ) @ 2,250 rpm
J1995
2
Pad area 53 cm
Fuel tank capacity 117 l
Pad height 76 mm
HYDRAULIC SYSTEM
Axial piston pump with variable displacement.
Driving Axial piston motor with constant displacement.
Axial piston motor with constant displacement.
Vibration Gear pump/motor with constant displacement.
Steering Gear pump with constant displacem.
Service brake Hydrostatic in forward and reverse lever.
Parking/
Failsafe multidisc brake in rear axle and front
Emergency
drum motor.
brake

Find us locally at www.dynapac.com

We reserve the right to change specifications without notice. Photos and
illustrations do not always show standard versions of machines.
The above information is a general description only, all information's are
supplied without liability.
 CA1300PD
Single drum vibratory
rollers

DIMENSIONS
DIMENSIONS STANDARD OPTIONAL
A. Wheelbase 1860 mm EQUIPMENT EQUIPMENT
B1. Width, front 1495 mm ■ Back up alarm Air Conditioning /Automatic
■ Battery switch (std) Climate Control (ACC) (Optional)
B2. Width, rear 1400 mm ■ Brake release
■ Cup and can holder ■ The system contains fluorinated
D. Drum diameter 1000 mm ■ Differential lock (limited slip) greenhouse gases.
H1. Height, with ROPS/cab 2540 mm ■ Drive control (right side) ■ Coolant designation: HFC-134a
■ Drum drive ■ Coolant weight when full: 0,62 kg
H2. Height, max. 2540 mm ■ ECO mode, Emergency stop ■ CO2-equivalent: 0,887 ton
■ Engine 75 hp (Tier4final) ■ GWP: 1430
K1. Ground clearance 260 mm ■ Engine hood (lockable)
K2. Curb clearance 260 mm ■ Fuel level display
■ High mounted exhaust pipe
L. Length 3960 mm ■ Horn, Hour meter display
■ Hydraulic checkpoints
L1. Length 4010 mm ■ Hydraulic fluid filter ("spin-on")
■ Hydraulic fluid (mineral), Interlock
O1. Overhang, right 62 mm ■ Key (starter), Lifting points
O2. Overhang, left 62 mm ■ Lifting pointsfor jack
■ Manuals (Operation &
P. Pad height 76 mm Maintenance)
■ Manuals (Spare parts catalogue)
R1. Turning radius, outside 3900 mm ■ Operator's platform (rubber
R2. Turning radius, inside 2460 mm mouted)
■ Operator's station (fixed), Parking
S. Drum shell thickness 22 mm brake
■ ROPS(fixed) or Cab with AC/
W. Drum width 1370 mm heater/fan
■ Seat (adjustable), Seat belt 3"
α. Steering angle ±33° ■ Storage box (on platform)
■ Storage for laminated manuals
■ Tie down points
■ Vandal cover (instrument panel)
■ Warning lights (brake
■ engine oil pressure
■ engine oil temperature, Engine
diagnostics
■ low charge, low fuel level)

Find us locally at www.dynapac.com

We reserve the right to change specifications without notice. Photos and
illustrations do not always show standard versions of machines.
The above information is a general description only, all information's are
supplied without liability.