Scribd
Upload
201 views

Steel Design Excel Sheet

Uploaded by

Hafiz Muhammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
201 views

Steel Design Excel Sheet

Uploaded by

Hafiz Muhammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 11

NATIONAL UNIVERSITY OF TEC

MAIN IJP ROAD, SECTOR I-12, IS


DEPARTMENT OF CIVIL ENGINEERING

Design of Column

Given That: Units


Shape W14X342
ASTM Designation A36 Steel
Length 12 ft
Live Load 64 lb/ft
Pu 1.125 Kips
Young Modulus, E 29000 Mpa
Coefficient, K 1

Using Manual
Fy 50 Ksi
Gyration radius, r 0.108 m
Gross Area, Ag 0.065 m^2
PhiØ 0.9

Formula:

1 KL/r 111.1111111
Using Conditions

2 4.71sqrt(E/Fy) 113.4318209 First Cndition


3 Fe=(3.14^2*E)/(KL/r)^2 23.1602004 Second Condition
4 Fcr=0.658^Fy/Fe)Fy 20.25546674
5 Pn= Fcr*Ag 1.316605338
6 phi Pn 1.18

Solution:

Given Data
Pu (Kips) Pi(λ) K L (in)

1.125 3.14 1 4.57


IVERSITY OF TECHNOLOGY
D, SECTOR I-12, ISLAMABAD
VIL ENGINEERING & TECHNOLOGY

ng Conditions

Fcr=(0.658^Fy/Fe)Fy
Fcr=(0.658^Fy/Fe)Fy

Design of Compression Member Using Formulas

Given Data Output Data Using Formulas


Safety Factor 4.71sqrt(
r (in^2)) E (Mpa) Fy (Ksi) Ag (in^2) KL/r Fcr=(0.658^Fy/Fe)Fy
(Phi) E/Fy)

0.108 29,000 50 0.065 0.9 42.31481 113.4318 Fcr=(0.877Fe)


as

ut Data Using Formulas


Fe=(3.14
^2*E)/ ØPn
Fcr (Ksi) Pn (Kips) Result
(KL/r)^2 (Kips)
(Ksi)

159.688 43.85859 2.850808099 2.565727 Pass


Given Data:
Dead load 90 lb/ft 0.09 Kips/ft
Live load 40 lb/ft 0.04 kips-in
Fy 36 ksi
Length 15 ft
Condition Lateral Supported at ends

Using Manual
Shape W12X26
E 29000
Zx 37.2
Sx 33.4
bf 6.49
tf 0.38

To Find
Whether shape is compact, non compact or slender

Solution

8.53947368

10.785278

<

1339.2 111.6 100.44


Kips-in

0.172

4.8375 58.05 Kips-ft

Condition Pass
Given Data:
Dead load 90 lb/ft 0.09 Kips/ft
Live load 40 lb/ft 0.04 kips-in
Fy 36 ksi
Length 7.5 ft
Condition Lateral Supported at ends

Using Manual
Shape W12X26
E 29000
Zx 37.2
Sx 33.4
bf 6.49
tf 0.38

To Find
Whether shape is compact, non compact or slender

Solution

8.539474

10.78528

<

1339.2 111.6 100.44


Kips-in

0.172
1.209375 14.5125 Kips-ft

Condition Pass
Given Data:
Dead load 90 lb/ft 0.09 Kips/ft
Live load 40 lb/ft 0.04 kips-in
Fy 36 ksi
Length 10 ft
Condition Lateral Supported at ends

Using Manual
Shape W10X12
E 29000
Zx 30.4
Sx 27.5
bf 8
tf 0.435

To Find
Whether shape is compact, non compact or slender

Solution

9.195402299

10.78527803

<

1094.4 91.2 82.08


Kips-in

0.172

2.15 25.8 Kips-ft

Condition Pass
Given Data:
Dead load 90 lb/ft 0.09 Kips/ft
Live load 40 lb/ft 0.04 kips-in
Fy 36 ksi
Length 20 ft
Condition Lateral Supported at ends

Using Manual
Shape W12X30
E 29000
Zx 43.1
Sx 38.6
bf 6.5
tf 0.44

To Find
Whether shape is compact, non compact or slender

Solution

7.3863636

10.785278

<

1551.6 129.3 116.37


Kips-in

0.172

8.6 103.2 Kips-ft

Condition Pass

You might also like