Validate Print Help Item Rate BoQ

Tender Inviting Authority: Executive Engineer (Civil), IIT Hyderabad

Name of Work: Campus Development Project of IIT Hyderabad.

Sub Head : Construction of CC Road besides the entry gate for diversion of traffic to existing entrance parking slots at IIT Hyderabad, Kandi, Sangareddy.

NIT No: IITH/CMD/CIV/2024-25/NIT-29

Name of the
Bidder/ Bidding
Firm / Company :

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender.
Bidders are allowed to enter the Bidder Name and Values only )

NUMBER # TEXT # NUMBER # TEXT # NUMBER # NUMBER # TEXT #

Quantity Units BASIC RATE i/c All TOTAL AMOUNT TOTAL AMOUNT
Taxes In Figures With Taxes In Words
To be entered by
Sl. the Bidder in
Item Description
No. Rs. P

1 2 4 5 13 54 55
Earth work in excavation by mechanical means (Hydraulic
excavator)/ manual means over areas (exceeding 30 cm in
1 depth, 1.5 m in width as well as 10 sqm on plan) including
getting out and disposal of excavated earth lead upto 50 m
and for all lift, as directed by Engineer-in-charge.

1.01 All kinds of soil. 430.00 Cum 177.50 #VALUE! #VALUE!

Clearing jungle including uprooting of rank vegetation,

grass, brush wood, trees and saplings of girth up to 30 cm
2 measured at a height of 1 m above ground level and 9400.00 Sqm 17.60 #VALUE! #VALUE!
removal of rubbish up to a distance of 50 m outside the
periphery of the area cleared.

Felling trees of the girth (measured at a height of 1 m

above ground level), including cutting of trunks and
2.01
branches, removing the roots and stacking of serviceable
material and disposal of unserviceable material.

2.02 Beyond 30 cm girth upto and including 60 cm girth 10.00 No's 532.35 #VALUE! #VALUE!

3 Carriage of materials

By Mechanical Transport including loading,unloading and

3.01
stacking

3.02 earth-3km 840.00 Cum #VALUE! #VALUE!

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not
4 exceeding 20cm in depth, consolidating each deposited 410.00 Cum #VALUE! #VALUE!
layer by ramming and watering, lead up to 50 and for all
lift.

Extra for compaction of earth work in embankment under

5 optimum moisture conditions to give at least 95% of the 440.00 Cum #VALUE! #VALUE!
maximum dry density (proctor density).

Providing and laying design mix cement concrete of M-30

grade, in roads/ taxi tracks/ runways, using cement
content as per design mix, using coarse sand and graded
stone aggregate in appropriate proportions as per
approved & specified design criteria, providing dowel bars
with sleeve/ tie bars wherever required, laying at site,
spreading and compacting mechanically by using needle
and surface vibrators, levelling to required slope/ camber,
6
finishing with required texture, including steel form work
with sturdy M.S. channel sections, curing, making
provision for contraction/ expansion, construction &
longitudinal joints (10 mm wide x 50 mm deep) by groove
cutting machine, providing and filling joints with approved
joint filler and sealants, complete all as per direction of
Engineerin-charge (Item of joint fillers, sealants, dowel
bars with sleeve/ tie bars to be paid separately).

Cement concrete manufactured in automatic batching

6.01 plant (RMC plant) including transportation to site in transit 120.00 Cum #VALUE! #VALUE!
mixer
 Steel reinforcement for R.C.C. work including
7 straightening, cutting, bending, placing in position and
binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D

7.01 3300.00 Kgs #VALUE! #VALUE!
ormore.

Construction of granular sub-base by providing close

graded Material conforming to specifications, mixing in a
mechanical mix plant at OMC, carriage of mixed material
by tippers to work site, for all leads & lifts, spreading in
8 130.00 Cum #VALUE! #VALUE!
uniform layers of specified thickness with motor grader on
prepared surface and compacting with vibratory power
roller to achieve the desired density, complete as per
specifications and directions of Engineerin- Charge.

Providing, laying, spreading and compacting graded stone

aggregate (sizerange 53 mm to 0.075 mm ) to wet mix
macadam (WMM) specificationincluding premixing the
material with water at OMC in for all leads & lifts,laying in
9 uniform layers with mechanical paver finisher in sub- 130.00 Cum #VALUE! #VALUE!
base / basecourse on well prepared surface and
compacting with vibratory roller of8 to 10 tonne capacity to
achievethe desired density, complete as perspecifications
and directions of Engineer-in-Charge

per cm
Providing and filling in position rubberized bitumen hot
depth per
sealing compound for sealing of expansion joints in roads /
10 1000.00 cm width #VALUE! #VALUE!
pavements all complete as per direction of the Engineer-
per metre
in-Charge.
length

Providing and applying 2.5 mm thick road marking strips

(retro- reflective) of specified shade/ colour using hot
thermoplastic material by fully/ semi automatic
thermoplastic paint applicator machine fitted with profile
shoe, glass beads dispenser, propane tank heater and
11 30.00 Sqm #VALUE! #VALUE!
profile shoe heater, driven by experienced operator on
road surface including cost of material, labour, T&P,
cleaning the road surface of all dirt, seals, oil, grease and
foreign material etc. complete as per direction of Engineer-
in-charge and accordance with applicable specifications.

Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and applying a
12
priming coat of approved steel primer using structural steel
etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets,

12.01 1000.00 Kgs #VALUE! #VALUE!
gates and similar works

Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of
13 4.00 Cum #VALUE! #VALUE!
unserviceable material within 50 metres lead as per
direction of Engineer - in- charge.

Painting with synthetic enamel paint of approved brand

14 and manufacture of required colour to give an even
shade :

14.01 Two or more coats on new work 70.00 Sqm #VALUE! #VALUE!

Providing and laying in position cement concrete of

15 specified grade excluding the cost of centering and
shuttering - All work up to plinth level:

1 :4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from

15.01 natural sources : 8 graded stone aggregate 40 mm 16.00 Cum #VALUE! #VALUE!
nominal size derived from natural sources)

Providing and laying in position specified grade of

reinforced cement concrete, excluding the cost of
16
centering, shuttering, finishing and reinforcement -All work
up to plinth level :

1 :1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived

16.01 from natural sources : 3 graded stone aggregate 20 mm 5.00 Cum #VALUE! #VALUE!
nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness),

including attached pilasters, buttresses, plinth and string
courses, fillets, columns, pillars, piers, abutments, posts
16.02
and struts etc. above plinth level up to floor five level,
excluding cost of centering, shuttering, finishing and
reinforcement :

1 :1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived

16.03 fromnatural sources : 3 graded stone aggregate 20 mm 2.00 Cum #VALUE! #VALUE!
nominal derived from natural sources)
 Providing and laying at or near ground level factory made
kerb stone of M-25 grade cement concrete in position to
the required line, level and curvature, jointed with cement
mortar 1:3 (1 cement: 3 coarse sand), including making
joints with or without grooves (thickness of joints except at
17 sharp curve shall not to more than 5 mm), including 15.00 Cum #VALUE! #VALUE!
making drainage opening wherever required complete etc.
as per direction of Engineerin- charge (length of finished
kerb edging shall be measured to calculate volume for
payment). (Precast C.C. kerb stone shall be approved by
Engineer-in-charge).

Providing and laying at or near ground level factory made

cement concrete saucer stone in position to the required
line, level and curvature, jointed with cement mortar 1:3 (1
cement: 3 coarse sand), including making joints with or
without grooves (thickness of joints except at sharp curve
18 80.00 Mtr #VALUE! #VALUE!
shall not to more than 5mm), including making sloping the
saucer stone wherever opeing complete etc. as per
direction of Engineer-in-charge (Precast C.C.saucer stone
of size 0.60x0.3x0.1 m shall be approved by Engineer-in-
charge).

Centering and shuttering including strutting, propping etc.

19
and removal of form for

Foundations, footings, bases of columns, etc. for mass

19.01 70.00 Sqm #VALUE! #VALUE!
concrete

19.02 Columns, Pillars, Piers, Abutments, Posts and Struts 17.00 Sqm #VALUE! #VALUE!

Providing and fixing on wall face unplasticised Rigid PVC

rain water pipes conforming to IS : 13592 Type A,
20 including jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion, (i) Single
socketed pipes.

20.01 110 mm diameter 30.00 Mtr #VALUE! #VALUE!

Constructing brick masonry manhole in cement mortar 1:4

( 1 cement : 4 coarse sand ) with R.C.C. top slab with
1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3
graded stone aggregate 20 mm nominal size), foundation
concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8
graded stone aggregate 40 mm nominal size), inside
21
plastering 12 mm thick with cement mortar 1:3 (1 cement :
3 coarse sand) finished with floating coat of neat cement
and making channels in cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) finished with a floating coat of neat cement complete
as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions,
21.01
total weight of cover and frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg) :

21.02 With Sewer bricks conforming to IS : 4885 8.00 No's #VALUE! #VALUE!

Providing and laying solid concrete blocks masonry with

block of M7.5 grade cement concrete block of required
thickness as per drawing in above plinth with RCC band
and mullion as per structural detail in cement mortar 1:4 (1
22 2.00 Cum #VALUE! #VALUE!
cement : 4 coarse sand) all complete as per direction of
Engineer. (The payment of RCC elements shuttering and
reinforcement shall be made for separately).

Providing and laying non-pressure NP2 class (light duty)

R.C.C. pipes with collars jointed with stiff mixture of
23
cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc. complete :

23.01 300 mm dia. R.C.C. pipe 90.00 Mtr #VALUE! #VALUE!

24 Extra for depth for manholes :

24.01 Size 90x80 cm

24.02 With Sewer bricks conforming to IS : 4885 6.00 Mtr #VALUE! #VALUE!
 25 6 mm cement plaster of mix :

25.01 1:3 (1 cement : 3 fine sand) 11.00 Sqm #VALUE! #VALUE!

Taking out existing kerb stones of all types from footpath/

central verge, including removal of mortar etc., disposal of
unserviceable material to the dumping ground, for which
26
payment shall be made separately and stacking of
10.00 Mtr #VALUE! #VALUE!
serviceable material within 50 metre lead as per direction
of Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of

27
required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm

27.01 over and including priming coat of exterior primer applied 11.00 Sqm #VALUE! #VALUE!
@ 0.90 litre/10 sqm)

Total in Figures #VALUE! #VALUE!

Quoted Rate in Words #VALUE!

Please Enable Macros to View BoQ information
Q information