深圳市依迈光电有限公司 www.imaioptics.

com

IM2000 Product Brochure（V1.1）

The IM2000 includes all the

circuitry and software required for

linear CCD array optical bench and

spectrometer operation. It is a

compact, flexible system with

expandable interfaces for easy

integration as an OEM component；

The IM2000 spectrometer is designed to provide users with low light, UV response,

near-infrared response, and other applications that require high sensitivity. The electronic

circuits are designed with considerable flexibility and can be connected to a variety of

modules as well as external interfaces. The IM2000 series spectrometers can communicate

with PCs, PLCs, and other embedded controllers via USB 2.0 or UART.

The USB connection can provide VCP and Libusb driver versions, VCP communication

development is simple, the user can operate the serial port according to our protocol to

send and receive serial port commands; The Libusb version provides stable and reliable

operation for engineering applications.

Key features:

• High sensitivity Hamamatsu detector

• High sensitivity from ultraviolet to near-infrared

 深圳市依迈光电有限公司 www.imaioptics.com
• Symmetrical crossed optical tables

• Wide range of slit widths available

• 16Bit high-precision sampling

• USB 2.0 480Mbps (High Speed)

• On-board pulse generator that can be used to trigger other devices

• On-board GPIO:

• Wavelength calibration coefficients

• Linearity correction factor

• 16-pin TTL connector

• Anti-interference circuit design, which can be used in complex industrial environments with strong

interference;

• Support software and hardware customization, support secondary development, and provide Demo

source code;

• System support: Windows, Linux, MAC, Android (QT C++, labview Demo, communication protocol,

other platform users compile by themselves);

Apply

• LED sorting; • Multi-parameter on-line water quality analyzer;

• Micro, fast spectrophotometer; • Fluorescence spectrometer, Raman spectrometer;

• Biochemistry analyzers; • Transmittance detection;

• Reflectance detection; • LIBS；

 深圳市依迈光电有限公司 www.imaioptics.com
Main technical parameters:

Model IM2000-Pro IM2000 IM2000-4K

Sensor chip HamamatsuS11639-01 HamamatsuS11638 HamamatsuS13496

interface
type USB-Type C，TTL

Effective pixels 2048 x 1 4096 x 1

Cell size 14 x 200 μm 14 x 42 μm 7 x 200 μm

sensitivity 1300 V/(lx·s) 160 V/(lx·s)

Signal-to-noise 500：1 200：1 500: 1

Detector
ratio 180~1100nm

Wavelength
spectral range 200nm~400nm，380-780nm，780-1000nm， Customizable

Incident
range Light SMA905 0.22NA， Free space

Optical 0.1-4 nm （ Depends on slit, spectral range ）

interface
TTL serial baud
resolution 115200/384000/921600 Switchable

Incident slit 10、25、50、100、150、200 μm Optional, other sizes can be customized

rate
TTL level
width input 3-5V， output 5V

Optical table f/4 Cross asymmetry C-T Light path

TTL analog 0-5V，0.12mV，12bitHigh precisionDAC

Maximum
output USB>1600 fps，TTLSerial>20 fps(@921600 baud rate ) USB>800fps，TTLSerial>10 fps

Exposure
frame ratetime 20us ~65s， Adjustable accuracy 1us

Average times 1-255

power 0.3A@5V，1.5W

Power supply
consumption 4.5-5.5V， The maximum cannot be exceeded 5.5V

size 94×70×29mm

weight 240g

Storage -20℃~60℃

Operating
temperature -20℃~60℃

Spectral
temperature

response plot
 深圳市依迈光电有限公司 www.imaioptics.com
TTL interface (connector type SH1.0-16P, level voltage 3.3-5V)：

Pin bits name function

1 Pin
bits bits VUSB 5VPower input

2 Pin VGND 5V- Power input

3 Pin USB DP USB dataD+

4 Pin USB DM USB dataD-

5-8Pin Rev retain

9 Pin
--8Pin UART RX Serial data interface port (3.3V)

10Pin UART TX Serial data transmission port (3.3V)

11Pin Trigger A single external trigger input（3.3V）

12Pin Trigger
In1 Continuous external trigger input（3.3V）

13Pin Sync
In2 Synchronous signal output, 5V level

14Pin Trigger Programmable output, 5V level

15Pin Analog
Out2 0-5V，Programmable voltage output

16Pin GND
Out GND

 Trigger In1：The current image is collected at the rising edge of the pulse, and the image is

automatically output when the acquisition is completed, the exposure time is controlled by the

MCU, the default high level, and the falling edge is triggered。

 Trigger In2：External trigger pin, 3.3V level, 5V max, PWM pulse input mode, high duration is CCD

integration time, low time is acquisition and transmission time, low level time needs to last 4ms at

min。

 Sync：The output sensor synchronous trigger signal, positive pulse output, rising edge image

sensor electronic shutter opening, sensor start integral, high duration is exposure time, can be

directly connected to the trig pin of the xenon lamp。

 深圳市依迈光电有限公司 www.imaioptics.com
 Trigger Out2：Programmable output, providing a control interface, the user can control the output

status of the port through software。

 Analog Out：Programmable analog voltage output interface, 0-5V voltage range, resolution 1.2mV。

 The difference between VGND and GND：The GND connection is internally digital, and the VGND

has an industrial mode inductor and a GND connection, which can filter out high-frequency

interference。

Use of Software：

a) After plugging in the USB cable, open the device manager and find the corresponding port

number (the system below win10 needs to install the driver, download address：

http://www.imaioptics.com/uploads/ueditor/20210401/1-210401134HAH.zip），As shown in the

figure below

VCPdrive Libusbdrive

b) Open the software, select the corresponding port number, and click Open to open the device

c) LineCCDView control software interface (QT C++ project source code is provided, users can

easily build their own software and implement their own functions in this framework)：
 深圳市依迈光电有限公司 www.imaioptics.com

Software Features：

1、 ：Continuous/single/pause image acquisition。

2、 ：Set the exposure time，20us-65s。

3、 ：Set the average number of times and average multiple images to output one,

which is conducive to improving stability and signal-to-noise ratio。

4、 ：The smoothness is set using a moving average algorithm。

5、 ：Set the sampling interval, 0-65535ms, every two acquisition waiting time,

the longer the interval, the slower the frame rate。

6、 ：Obtain the background spectrum, subtract the background spectrum。

7、 ：Images are automatically scaled。

8、 ：Stores the current spectral data。

9、 ：Hardware information, in order of hardware

version number, sensor model, firmware version number, and serial number。

10、 ：The current transmission frame rate and display frame rate。

11、 ：External hard trigger mode

 深圳市依迈光电有限公司 www.imaioptics.com

12、 ：Single trigger ：Single trigger, input a single pulse，Continuous trigger：

Continuous trigger, input continuous trigger pulse, can control the exposure time。

13、 ：Analog port voltage output value, 12bit DAC, resolution 1mV。

14、 ：Trigger2 pin output level control, 0V, and 5V。

15、 ：Read and set the serial port baud rate of the TTL port, automatically

save it to flash, and automatically load the set value after the next power-up。

16、 ：Set the image gain and baseline offset, the Offset value is -254 to +254,

and the positive image baseline is shifted up and down。

17、 ：Obtain and save configuration parameters。

18、 ：The coordinate value corresponding to each pixel accounts for 16 bits

19、 ：Obtain and write X coordinate data, wait for the write, power back on, reopen

the software, clear the content in the text box, and get the data. Note that you need to write the

coordinate data first, and then save the configuration parameters。

 深圳市依迈光电有限公司 www.imaioptics.com

20、 ：Write and read user correction data for spectral wavelength, wavenumber,

analog output correction, 16 characters effective length。

21、 ：The Sync pin controls the output of the sync pulse when it is

selected, otherwise the sync pulse output function is turned off

22、 ：Toggle the X-coordinate

unitWavelenght，Ramanshift，Wavenumber，Wavelength, Raman shift, and wavenumber correspond to

correction data 1, 2, and 3 respectively, and the method of 3rd fitting is still used in this demo, such as

wavelength conversion algorithm：

for(int pixels=0; pixels <2048; pixels ++){double wavelength = f0* pixels ^3+f1* pixels ^2+f2* pixels +f3;}
 深圳市依迈光电有限公司 www.imaioptics.com
For the Easpec Tralit software, see the Easpec Tralite User Manual for details
 深圳市依迈光电有限公司 www.imaioptics.com
Example of a xenon lamp connection：
 深圳市依迈光电有限公司 www.imaioptics.com
Dimensional drawings：

Unit：mm
 深圳市依迈光电有限公司 www.imaioptics.com
Application examples：

8.1 The IM2000Pro uses IMSpectralSuit software to measure the UV spectrum of mercury lamps and

detect changes in single-point wavelength values in real time：

8.2 IM2000Pro 405nm laser measured spectrum：

 深圳市依迈光电有限公司 www.imaioptics.com
8.3 IThe M2000Pro uses a TTL interface to connect to a wireless module, and an Android phone uses a

wifi connection to monitor single-point waveform changes in real time：

8.4 The IM2000Pro uses a 785 laser probe to test ethanol Raman spectroscopy：
 深圳市依迈光电有限公司 www.imaioptics.com
8.5 Connect a synchronous xenon lamp, power the xenon lamp with the TTL interface, and view the

xenon lamp spectrum using IMSpectralSuit：

 深圳市依迈光电有限公司 www.imaioptics.com
Photographs of the real thing：

IM2000-WIFI version with wireless module IM2000 standard version