Enardo 950

High Performance PVRV Vent-to-Atmosphere

Introduction Valve Setting Range

Pressure
Enardo™ 950 pressure vacuum relief
valves are designed with features to 0.5 to 32.0 oz./sq. in.
exceed the performance of standard (0.5 oz./sq. in. increments)
valves on the market. Standard 1.0 to 55.0 in. w.c.
features include: (0.5 in. w.c. increments)
• The only dual guided (top and bottom) 2.2 to 138.0 mbar
pallet for smoother valve stroke, less (2.2 mbar increments)
flutter and valve wear. 25 to 1406 mm w.c.
• Polyphenylene Sulfide (PPS), advanced (13 mm w.c. increments)
composite thermoplastic material Vacuum
for seat and pallet providing superior 0.5 to 32.0 oz./sq. in.
resistance to corrosion, chemical (0.5 oz./sq. in. increments)
attack, liquid and vapor adhesion, 1.0 to 55.0 in. w.c.
temperature extremes (-50 to 500°F) (0.5 in. w.c. increments)
and sticking due to valve seat freeze.
2.2 to 138.0 mbar
• Fully field replaceable pallet and seat (2.2 mbar increments) Figure 1. Enardo 950 High Performance
assemblies without need for special PVRV Vent-to-Atmosphere
25 to 1406 mm w.c.
tools or complex procedures which
(13 mm w.c. increments)
eliminates the need to send out for
rebuilding or total valve replacement. Construction Materials
(Can be maintained by in house Features
maintenance personnel). Housing
Aluminum
• Optional Remote Monitoring provides • Advanced composite
Ductile Iron
open/closed position information that thermoplastic
Stainless Steel
can be viewed from a control room, Polyphenylene Sulfide (PPS)
Carbon Steel
to facilitate troubleshooting and materials for seat and pallet
immediate problem identification. Seat/Pallet
Polyphenylene Sulfide (PPS) provide superior resistance
The Enardo 950 vent-to-atmosphere 316 Stainless steel to corrosion, chemical
design maintains a tight seal until system Pallet Seal attack, liquid and vapor
pressure or vacuum exceed the set FEP adhesion, temperature
pressure of the valve. When overpressure Nitrile (NBR) extremes (-50 to 500°F)
occurs the weighted pallet lifts, breaking Fluorocarbon (FKM) and sticking due to valve
the seal between the seat and pallet,
allowing vapors to pass through the
Hardware seat freeze
Zinc-plated carbon steel • Enardo Saber® Guide
valve orifice and relieving the pressure or
Stainless steel
vacuum buildup. The valve reseals upon valve system provides for
relief and remains sealed. Weight smooth valve stroke during
Zinc-plated carbon steel
operation and reduces
Inlet Connection Sizes Stainless steel
Lead valve wear
2 to 12 in. / 50 to 300 mm • Exceeds the most stringent
Body Gasketing
Nitrile (NBR) standards for allowable
FEP leakage (1 SCFH at 90%
Fluorocarbon (FKM) setpoint per valve) and
provides excellent setpoint
Additional Technical Data accuracy (+/-3%)
For more technical information, contact • Fully field replaceable pallet
your local Sales Office or log on to: and seat assemblies.
www.enardo.com
• Available in ANSI, DIN and
JIS flanges
• EN 13463-1 and EN 13463-5
Certified
• Optional Remote Monitoring

71
Enardo 950
High Performance PVRV Vent-to-Atmosphere

D E
B
A

Figure 2. Enardo™ 950 Dimensions

Table 1. Enardo 950 Dimensions and Weights(1)

WEIGHT
INLET A B C D E WEIGHT WEIGHT
(STAINLESS STEEL OR
CONNECTION (OVERALL LENGTH) (OVERALL WIDTH) (OVERALL HEIGHT) (CL INLET) (CL I/O) (ALUMINUM) (DUCTILE IRON)
CARBON STEEL)
In. mm In. mm In. mm In. mm In. mm In. mm Lb kg Lb kg Lb kg
2 50 16 406 10 254 14-3/8 365 5 127 7-7/16 189 21 10 50 23 54 24
3 80 16 406 10 254 14-3/4 375 5 127 7-7/16 189 23 10 54 24 58 26
4 100 22-1/2 572 14 356 19-1/8 486 7 178 9-13/16 249 41 19 102 46 110 50
6 150 22-3/4 578 14 356 21-3/8 543 7 178 10 254 45 20 114 52 123 56
8 200 36-3/4 933 23 584 25-1/4 641 11-1/2 292 17-1/8 435 123 56 335 152 362 164
10 250 36-3/4 933 23 584 26-3/4 679 11-1/2 292 17-1/8 435 129 59 355 161 383 174
12 300 40-15/16 1040 23 584 34-3/4 883 11-1/2 292 19-1/16 484 144 65 379 172 405 184
1. Unit weights indicate Net Weight of valve in pounds at standard set pressure (0.5 oz./sq. in. pressure - 0.5 oz./sq. in. vacuum), does not include shipping crate or box.
Add 20% for gross shipping weight (Domestic Only).

Key to Enardo 950 Model Number

Pallet and Pallet Seal

Model - Inlet Size - Housing Material Body/Seat/Lid Seal Material -
Seat Material Material
950 2 to 12 in. 1 = Aluminum 1 = PPS Polyphenylene Sulfide 1 = FEP 1 = PTFE Body and FEP Seat/Lid
2 = Ductile Iron 2 = 316SST 2 = Nitrile (NBR) 2 = Nitrile (NBR)
4 = 316SST 3 = Fluorocarbon (FKM) 3 = Fluorocarbon (FKM)
5 = Carbon Steel

Pressure Units Pressure Setting / Vacuum Units Vacuum Setting - Weight Material - Options

z = oz./sq.in. 0.5 to 32.0 oz./sq.in. z = oz./sq.in. 0.5 to 32.0 oz./sq.in. C=C  S ZP 0 = No Options
n = in. w.c. 0.86 to 55.0 in. w.c. n = in. w.c. 0.86 to 55.0 in. w.c. S = SST F = Flat Face Flange (standard for
mm = mm w.c. 22 to 1406 mm w.c. mm = mm w.c. 22 to 1406 mm w.c. L = Lead Alumunim)
mb = mbar 2.2 to 138 mbar mb = mbar 2.2 to 138 mbar R = Raised Face Flange (standard for CS,
DI, SS)
X = Epoxy Coating
W1 = Wireless Pressure and Vacuum
Monitoring
W2 = Wireless Pressure Monitoring Only
W3 = Wireless Vacuum Monitoring Only
W4 = Wired Pressure and Vacuum
Monitoring
W5 = Wired Pressure Monitoring Only
W6 = Wired Vacuum Monitoring Only

Example:

950 2 1 1 1 2 n 12 n 6 C 0

Indicates a vent-to-atmosphere pressure vacuum relief valve with 2 in. inlet, ANSI 150 lb. flat face flange pattern connections, Aluminum housing,
PPS Polyphenylene Sulfide pallet and seat, FEP pallet seal and Nitrile (NBR) lid seal. Pressure setting is 12 in. w.c. and vacuum setting is 6 in. w.c.
Carbon steel weight material. No options.

72