Smart Hydration Water Bottle

Mithun Balaji. V Chennai, India

SCOPE Praveen S Kumar [email protected]
VIT Chennai SCOPE
Chennai, India VIT Chennai
[email protected]

Abstract—In this paper, we present the design and design ensures portability and reliability, making it suitable
implementation of a smart water bottle capable of accurately for continuous daily use.
tracking water consumption through sensor-based
measurements. The bottle integrates a water pressure sensor at The following sections detail the system architecture,
its base to continuously measure the pressure exerted by the including hardware selection, sensor calibration, data
water column, which is then converted into a corresponding processing algorithms, and power management techniques.
water height and volume based on the cylindrical shape of the Experimental results demonstrate the accuracy and
bottle. Additionally, a magnetic hall effect sensor or reed effectiveness of the smart water bottle in promoting better
switch detects whether the bottle is open or closed, allowing the hydration habits through consistent monitoring. This project
system to monitor changes in volume each time the bottle is contributes to the field of wearable health monitoring
opened, thus tracking the amount of water consumed. An devices, showcasing a practical, scalable solution for
OLED display provides real-time feedback to the user, showing hydration tracking in a compact form factor.
the volume consumed throughout the day. This design offers a
cost-effective, scalable solution for health-conscious users to
monitor hydration, making use of minimal components to
ensure portability and efficiency. The paper discusses the A. This Is a Level 2 Heading
technical details of the system, including the sensor calibration, 1) And this is a level 3 heading: Equations should be
data processing algorithms, and power management strategies. typed in either Times New Roman or Symbol font, or, if the
Our results demonstrate the device’s accuracy and reliability, equation is multileveled, inserted into your text as a graphic
supporting its application in daily health tracking.
instead. On the far right of the line containing the equation,
Keywords—Smart water bottle, water consumption tracking, number it in parentheses, and use this number to refer to it in
hydration monitoring, water pressure sensor, hall effect sensor, the text (1).
reed switch, real-time data display, health monitoring, IoT
hydration tracking, wearable technology. ab 
I. INTRODUCTION 2) This is another level 3 heading: The body text is
Hydration is a critical component of overall health, divided into two columns on each page, written in 10 pt.
impacting cognitive function, physical performance, and Times New Roman, and justified (meaning that the text is
metabolic processes. Despite the known benefits of adequate spaced in a way that makes the right edge line up neatly).
hydration, many individuals struggle to maintain consistent All the appropriate formatting is automatically applied in
water intake. Recent advancements in wearable technology
this template. If anything goes wrong, you can reapply it
and Internet of Things (IoT) devices present an opportunity
to support users in tracking and improving their hydration using the “styles” section in Word.
habits. Smart water bottles have emerged as a novel solution, Table Column Head
Table
aiming to provide real-time feedback on water consumption Head Table column subhead Subhead Subhead
through data-driven monitoring. a
text Text
This paper presents the design and development of a
smart water bottle that leverages sensor-based measurements a) And this is a level 4 heading: It’s recommended to
to track water consumption accurately. Unlike traditional write your text in a separate document and then add it to this
hydration reminders or water intake tracking applications, template once it’s complete. When copying text into the
this system utilizes a water pressure sensor at the base of the template from another document, make sure that the
bottle to measure the height of the water column. This height
measurement is then used to calculate the water volume, Fig. 1. This is a figure caption. It appears directly underneath the figure.
assuming a cylindrical shape for the bottle. The smart water
bottle is also equipped with a hall effect sensor or reed switch appropriate style is still applied to each section, reapplying
to detect when the bottle is open or closed, which allows the styles if necessary.
system to monitor changes in water volume upon each use,
thus accurately tracking the amount of water consumed. b) This is another level 4 heading: It’s also possible to
add bullet points when appropriate, using the “bullet list”
To provide users with immediate feedback, an OLED style:
display is integrated into the design, displaying the volume of
water consumed in real time. This feature enables users to  Treat the word “data” as plural, not singular.
monitor their daily intake effectively and adjust their  For example, “the data indicate that …”
hydration behavior accordingly. By employing cost-effective
components and efficient power management strategies, this

XXX-X-XXXX-XXXX-X/XX/$XX.00 ©20XX IEEE

B. This Is Another Level 2 Heading TABLE I. THIS IS THE HEADING FOR A TABLE

Place any figures or tables you use at the top or bottom of a.

This is a table footnote.

a column. Don’t place them in the middle of a column. If You can cite your references in text by including the
particularly wide, a table or figure can span across both corresponding number, in square brackets [1]. If you need to
columns. Insert a table or figure after the point where it is cite a specific part of the source, you can include a page
first cited in the text. number [2, p. 13] or range [3, pp. 41–56].
When inserting a figure, such as a photograph or ACKNOWLEDGMENTS
infographic, use 8 pt. Times New Roman for any labeling
“Acknowledgment(s)” is spelled without an “e” after the
text within the image and for the figure caption. You can see
“g” in American English.
an example of a figure caption in Fig. 1, above. Refer to
figures like that, using the abbreviation “Fig.” and the As you can see, the formatting ensures that the text ends
figure’s number. in two equal-sized columns rather than only displaying one
column on the last page.
A table heading (using the “table head” style) appears
above a table. This will automatically number the table for This template was adapted from those provided by the
you. Any footnotes appear below the table, using the “table IEEE on their own website.
footnote” style. Footnotes are indicated by superscript
lowercase letters within the table. An example of a table can REFERENCES
be seen in Table I, below. [1] D. V. Lindberg and H. K. H. Lee, “Optimization under constraints by
applying an asymmetric entropy measure,” J. Comput. Graph. Statist.,
II. THIS IS ANOTHER LEVEL 1 HEADING vol. 24, no. 2, pp. 379–393, Jun. 2015, doi:
10.1080/10618600.2014.901225.
All the headings in the main body of your paper are [2] B. Rieder, Engines of Order: A Mechanology of Algorithmic
numbered (automatically). Techniques. Amsterdam, Netherlands: Amsterdam Univ. Press, 2020.
Another type of heading is the “component heading”, [3] I. Boglaev, “A numerical method for solving nonlinear integro-
differential equations of Fredholm type,” J. Comput. Math., vol. 34,
which is used for other components that aren’t part of the no. 3, pp. 262–284, May 2016, doi: 10.4208/jcm.1512-m2015-0241.
main text. These are usually your acknowledgments and your
references, which you can see examples of below. These
headings are not numbered. The correct styling for them can Make sure to remove all placeholder and explanatory text
be applied using the “Heading 5” style, which is the same as from the template when you add your own text. This
the “Heading 1” style but without numbering. text should not be here in the final version!