2 Table of Contents

Introduction
About MEDIGMA 3
Dental Implant Systems and Surface Treatments 4

Standard Internal Hex Connection Implant Systems

FixTite-S™ 6-11
Mars™ 12-17
Fix-a-Dent™ 18-23

One Piece Implant System

Fix-1™ 28-33

Surgical Kits & Tools

Standart Internal Hex Surgical Kit 34-35
Tools 36-37
Surgical Drills & Drill Stoppers 39-40
 About MEDIGMA
3

Medigma Biomedical develops, manufactures and distributes dental implant systems, restorative
components, surgical and prosthetic tools and accessories.
Founded in 1992, Medigma is considered one of the pioneers in the field of Implant Dentistry, and has
been providing dentists and dental technicians with innovative solutions.
Medigma’s product lines are known for their high precision and user-friendly features. The professional
research and development team constantly ensures the production of technologically advanced
high-quality products. Medigma works closely with the industry’s dental professionals, surgeons,
technicians, in both private and public sectors, in order to provide customers with up-to-date industry
solutions, knowledge and tools.
Medigma Biomedical is very proud of its reputation of providing excellent service and quality to
customers across the globe, through continuous customer communications, and a variety of dental
implant solutions, for restorations ranging from the simplest case to the most complex surgical case.
Medigma’s products are CE marked and comply with the highest regulatory requirements.

Medigma aspires to provide an assortment of high-quality products and innovative solutions

that meets the needs of our customers with uncompromised service and reasonable prices and
to develop, produce and market the highest quality of dental implant products and services.
4 MEDIGMA Dental Implant Systems

Standard Internal Hex Implant Systems

FixTite™-S Mars™

AB/AE - Alumina Oxide Blast/Acid AB/AE - Alumina Oxide Blast /Acid

Etched Surface Treatment Etched Surface Treatment

3.5 3.75 4.2 5 6 3.5 3.75 4.2 5 6

Fix-a-Dent™ Fix-1™

AB/AE - Alumina Oxide Blast /Acid AB/AE - Alumina Oxide Blast /Acid
Etched Surface Treatment Etched Surface Treatment

3.3 3.75 4.2 5 6 3 3.3 3.6 4.2 5

Surface Treatments

AB /AE (SLA™*) -
Alumina Oxide Blasted Large Grit Followed by Acid Etch

AB/AE surface treatment involves blasting with large grit aluminum oxide particles followed by acid
etching with sulfuric and hydrochloric acid to remove the embedded particles.

* Institut Straumann AG’s trademark

5
6 FixTiteTM- S

FixTite -S TM
FixTite™ - S
AB/AE Surface Treatment

FixTite™-S

FixTite™-S is a tapered core dental implant with a unique spiral

triple-lead thread and triple vertical flutes design.

FixTite™-S has three major advantages:

Speed
FixTite™-S features a unique triple-lead thread design with 3.6mm
(3x1.2mm) pitch. This design allows improved self-drilling, self-
cutting and a very fast implant insertion.

Simplicity
A simple surgical procedure and drilling protocol based on three
and two step drills sets the stage for accurate implant positioning.
Each FixTite™-S implant features a 2.4mm internal hex connection
of 2.4mm regardless of its diameter. This single prosthetic platform
significantly simplifies the restoration.

Stability
FixTite™-S has a conical core, spiral thread and triple vertical flutes
design which creates immediate stability, also in type IV bone.The
design contributes to balanced load distribution and reduces bone
pressure with minimal invasive surgery.
FixTite™-S features a trapezoid thread and AB/AE surface
treatment for accelerated osseointegration and increased BIC
(Bone to Implant Contact).

FixTite™-S features:

Triple-lead thread design with 3.6 (3x1.2mm) pitch

Trapezoid thread, optimal space for a clot of blood
Single restorative platform, regardless of diameter, with built-in
platform switching
AB/AE surface treatment – a 98.7% implant survival rate (data on file)
Flat apex for improved insertion and placement
Improved self-drilling and self-cutting
Three vertical flutes

L-6.25mm L-8mm L-10mm L-11.5mm L-13mm L-16mm L-18mm

3.5mm 35081 35101 35111 35131 35161 35181

3.75mm 37081 37101 37111 37131 37161 37181

4.2mm 42061 42081 42101 42111 42131 42161 42181

5.0mm 50061 50081 50101 50111 50131 50161

6.0mm 60061 60081 60101 60111 60131 60161

 FixTiteTM- S
7
FixTiteTM - S 3.5

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

35081 8

35101 10

35111 11.5

35131 13

35161 16

35181 18

Drill Sequence OR

Tri-Step Ø (3.2) Ø 3.2

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.2) 2. (3.2)

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead For all Bone Type Bone Type
of the Tri-Step drill. Bone Type II & III I
8 FixTiteTM- S

FixTiteTM - S 3.75

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

37081 8

37101 10

37111 11.5

37131 13

37161 16

37181 18

Drill Sequence OR

Tri-Step Ø (3.2) Ø 3.2

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.2) 2. 3.2

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead For all Bone Type Bone Type
of the Tri-Step drill. Bone Type II & III I
 FixTiteTM- S
9
FixTiteTM - S 4.2

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

42061 6.25

42081 8

42101 10

42111 11.5

42131 13

42161 16

42181 18

OR

Tri-Step Ø (3.6) Ø 3.6

Drill Sequence

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.6) 2. (3.6) 2. 3.6

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant. For all
Bone Type
Bone Type
II & III & IV
Bone Type
I
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead
of the Tri-Step drill.
10 FixTiteTM- S

FixTiteTM - S 5.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

50061 6.25

50081 8

50101 10

50111 11.5

50131 13

50161 16

OR OR

Tri-Step Ø 3.6 Ø (4.2) Ø 4.2 Ø (4.6) Ø 4.2 Ø 4.6

Drill Sequence

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.6 2. 3.6 2. 3.6
3. (4.2) 3. 4.2 3. 4.2
4. (4.6) 4. 4.6
Note: (x.xx) drill to the depth of the cortex only. For all Bone Type Bone Type Bone Type
All measurements are in mm. Bone Type IV II & III I

CAUTION: The drill preparation is up to 1mm longer than the implant.

* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead
of the Tri-Step drill.
 FixTiteTM- S
11
FixTiteTM - S 6.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

60061 6.25

60081 8

60101 10

60111 11.5

60131 13

60161 16

OR OR

Drill Sequence Tri-Step Ø 3.6 Ø 4.2 Ø (5.2) Ø 5.2 Ø (5.6) Ø 5.2 Ø 5.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.6 2. 3.6 2. 3.6
3. 4.2 3. 4.2 3. 4.2
4. (5.2) 4. 5.2 4. 5.2
5. (5.6) 5. 5.6
For all Bone Type Bone Type Bone Type
Note: (x.xx) drill to the depth of the cortex only. Bone Type IV II & III I

All measurements are in mm.

CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead of the Tri-Step drill.
12 MarsTM

Mars TM
Mars™
AB/AE Surface Treatment

Mars™

Mars™ dental implants are tapered implants with a spiral

tap that condenses bone during placement for enhanced
immediate stability. The Mars™ implants have two large variable
threads and a tapered core for accurate implant placement,
self-tapping, improved esthetics and better load distribution.

Mars™ implants feature a special round shaped apex that

pushes the bone graft with minimal harm to anatomic structures.
Mars™ implants are very user-friendly and their unique design
often allows for immediate function for all bone types.

The Mars™ spiral dental implants features a standard SLA -

AB/AE- Alumina Oxide Blasted/Acid Etched surface treatment.

Mars™ features:

High primary stability, also in type IV bone

Double lead threads (2x1.2mm)
Bone-condensing property
Self-tapping
Redirecting capability for optimal placement
Built-in platform switching
Minimally invasive surgery
Immediate function / Loading capability
Single prosthetic platform for easy restoration

L-6.25mm L-8mm L-10mm L-11.5mm L-13mm L-16mm L-18mm

3.5mm 113508 113510 113511 113513 113516 113518

3.75mm 113808 113810 113811 113813 113816 113818

4.2mm 114206 114208 114210 114211 114213 114216 114218

5.0mm 115006 115008 115010 115011 115013 115016

6.0mm 116006 116008 116010 116011 116013

 MarsTM
13
MarsTM 3.5

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

113508 8

113510 10

113511 11.5

113513 13

113516 16

113518 18

OR

Drill Sequence Tri-Step Ø (3.2) Ø 3.2

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.2) 2. (3.2)

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant. For all Bone Type Bone Type
Bone Type II & III I
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead
of the Tri-Step drill.
14 MarsTM

MarsTM 3.75

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

113808 8

113810 10

113811 11.5

113813 13

113816 16

113818 18

Drill Sequence OR

Tri-Step Ø (3.2) Ø 3.2

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.2) 2. 3.2

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead For all Bone Type Bone Type
Bone Type II & III I
of the Tri-Step drill.
 MarsTM
15
MarsTM 4.2

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

114206 6.25

114208 8

114210 10

114211 11.5

114213 13

114216 16

114218 18

Drill Sequence OR

Tri-Step Ø (3.6) Ø 3.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.6) 2. (3.6) 2. 3.6

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead For all Bone Type Bone Type
Bone Type II & III & IV I
of the Tri-Step drill.
16 MarsTM

MarsTM 5.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

115006 6.25

115008 8

115010 10

115011 11.5

115013 13

115016 16

Drill Sequence OR OR

Tri-Step Ø 3.6 Ø (4.2) Ø 4.2 Ø (4.6) Ø 4.2 Ø 4.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.6 2. 3.6 2. 3.6
3. (4.2) 3. 4.2 3. 4.2
4. (4.6) 4. 4.6

For all Bone Type Bone Type Bone Type

Bone Type IV II & III I
Note: (x.xx) drill to the depth of the cortex only.
All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead of the Tri-Step drill.
 MarsTM
17
MarsTM 6.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

116006 6.25

116008 8

116010 10

116011 11.5

116013 13

Drill Sequence OR OR

Tri-Step Ø 3.6 Ø 4.2 Ø (5.2) Ø 5.2 Ø (5.6) Ø 5.2 Ø 5.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.6 2. 3.6 2. 3.6
3. 4.2 3. 4.2 3. 4.2
4. (5.2) 4. 5.2 4. 5.2
5. (5.6) 5. 5.6

Note: (x.xx) drill to the depth of the cortex only. For all Bone Type Bone Type Bone Type
Bone Type IV II & III I
All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead of the Tri-Step drill.
18 Fix-A-DentTM

Fix-A-Dent TM
Fix-A-Dent™
AB/AE Surface Teatment

Fix-A-Dent™ Straight Implant System

The Fix-A-Dent™ implant is a straight, parallel-walled,

slightly tapered implant, with a V-shaped thread design.
Its design allows for accurate positioning to improve
esthetics and to better load distribution. The Fix-A-
Dent™ features AB/AE (Alumina-Oxide Blasted / Acid-
Etched) surface treatment.

L-6.25mm L-8mm L-10mm L-11.5mm L-13mm L-16mm L-18mm

ID- 3.3mm STA-3310 STA-3311 STA-3313 STA-3316 STA-3318

ID- 3.75mm STA-3708 STA-3710 STA-3711 STA-3713 STA-3716 STA-3718

ID- 4.2mm STA-4206 STA-4208 STA-4210 STA-4211 STA-4213 STA-4216 STA-4218

ID- 5.0mm STA-5006 STA-5008 STA-5010 STA-5011 STA-5013 STA-5016

ID- 6.0mm STA-6006 STA-6008 STA-6010 STA-6011 STA-6013

 Fix-A-DentTM
19
Fix-A-DentTM 3.3

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

STA-3310 10

STA-3311 11.5

STA-3313 13

STA-3316 16

STA-3318 18

Drill Sequence OR

Ø 2.0 Ø 2.8 Ø (3.2) Tri-Step

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. 2.0 1. 2.0 1. Tri-Step*

2. (2.8) 2. (2.8)
3. (3.2)

Note: (x.xx) drill to the depth of the cortex only.

All measurements are in mm.
For all Bone Type Bone Type
CAUTION: The drill preparation is up to 1mm longer than the implant. Bone Type II & III I

* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead of the Tri-Step drill.
20 Fix-A-DentTM

Fix-A-DentTM 3.75

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

STA-3708 8

STA-3710 10

STA-3711 11.5

STA-3713 13

STA-3716 16

STA-3718 18

Drill Sequence OR

Tri-Step Ø (3.2) Ø 3.2

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.2) 2. 3.2

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead For all Bone Type Bone Type
of the Tri-Step drill. Bone Type II & III I
 Fix-A-DentTM
21
Fix-A-DentTM 4.2

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

STA-4206 6.25

STA-4208 8

STA-4210 10

STA-4211 11.5

STA-4213 13

STA-4216 16

STA-4218 18

Drill Sequence OR

Tri-Step Ø 3.2 Ø (3.6) Ø 3.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.2 2. (3.6) 2. 3.6

Note: (x.xx) drill to the depth of the cortex only.

All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant. For all Bone Type Bone Type Bone Type
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence Bone Type IV II & III I

instead of the Tri-Step drill.

22 Fix-A-DentTM

Fix-A-DentTM 5.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

STA-5006 6.25

STA-5008 8

STA-5010 10

STA-5011 11.5

STA-5013 13

STA-5016 16

OR OR

Drill Sequence Tri-Step Ø 3.6 Ø (4.2) Ø 4.2 Ø (4.6) Ø 4.2 Ø 4.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.6 2. 3.6 2. 3.6
3. (4.2) 3. 4.2 3. 4.2
4. (4.6) 4. 4.6

Note: (x.xx) drill to the depth of the cortex only. For all Bone Type Bone Type Bone Type
Bone Type IV II & III I
All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead
of the Tri-Step drill.
 Fix-A-DentTM
23
Fix-A-DentTM 6.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

STA-6006 6.25

STA-6008 8

STA-6010 10

STA-6011 11.5

STA-6013 13

OR OR

Drill Sequence Tri-Step Ø 3.6 Ø 4.2 Ø 4.6 Ø (5.2) Ø 5.2 Ø (5.6) Ø 5.2 Ø 5.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.6 2. 3.6 2. 3.6
3. 4.2 3. 4.2 3. 4.2
4. 4.6 4. 4.6 4. 4.6
5. (5.2) 5. 5.2 5. 5.2
6. (5.6) 6. (5.6)
For all Bone Type Bone Type Bone Type
Bone Type IV II & III I
Note: (x.xx) drill to the depth of the cortex only.
All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead of the Tri-Step drill.
24 FixTiteTM- S, MarsTM, Fix-A-DentTM
Prosthetics

Healing Abutments & Cover Screw

CSS Implant Cover Screw Ti 6AI 4V ELI

TGH2-SL Slim Healing Abutment 3.5mmD x 2mmL Ti 6AI 4V ELI

TGH3-SL Slim Healing Abutment 3.5mmD x 3mmL Ti 6AI 4V ELI

TGH4-SL Slim Healing Abutment 3.5mmD x 4mmL Ti 6AI 4V ELI

TGH5-SL Slim Healing Abutment 3.5mmD x 5mmL Ti 6AI 4V ELI

TGH6-SL Slim Healing Abutment 3.5mmD x 6mmL Ti 6AI 4V ELI

TGH2-ST Healing Abutment 4.5mmD x 2mmL Ti 6AI 4V ELI

TGH3-ST Healing Abutment 4.5mmD x 3mmL Ti 6AI 4V ELI

TGH4-ST Healing Abutment 4.5mmD x 4mmL Ti 6AI 4V ELI

TGH5-ST Healing Abutment 4.5mmD x 5mmL Ti 6AI 4V ELI

TGH6-ST Healing Abutment 4.5mmD x 6mmL Ti 6AI 4V ELI

TGH2-WD Wide Healing Abutment 6mmD x 2mmL Ti 6AI 4V ELI

TGH4-WD Wide Healing Abutment 6mmD x 4mmL Ti 6AI 4V ELI

TGH5-WD Wide Healing Abutment 6mmD x 5mmL Ti 6AI 4V ELI

Cement Retained

SRA3N-3 Slim Titanium Abutment 3mm Ti 6AI 4V ELI

SRA3N-6 Slim Titanium Abutment 6mm Ti 6AI 4V ELI

SRA3N-8 Slim Titanium Abutment 8mm Ti 6AI 4V ELI

SRA3 Straight Titanium Abutment - No End Line Ti 6AI 4V ELI

SRA3-1 Straight Titanium Abutment 1mm Ti 6AI 4V ELI

SRA3-2 Straight Titanium Abutment 2mm Ti 6AI 4V ELI

SRA3-3 Straight Titanium Abutment 3mm Ti 6AI 4V ELI

SRA3-4 Straight Titanium Abutment 4mm Ti 6AI 4V ELI

SRA3-5 Straight Titanium Abutment 5 mm Ti 6AI 4V ELI

TAL11.5 Straight Titanium Abutment Long 12.5mm Ti 6AI 4V ELI

SRA5 Straight Titanium Abutment 5mmD Ti 6AI 4V ELI

WPSRA Wide Profile Titanium Abutment Ti 6AI 4V ELI

CAS2H Straight Cylindrical Titanium Abutment 2mm - with Hex Ti 6AI 4V ELI

TAS2 Straight Cylindrical Titanium Abutment 2mm - without Hex Ti 6AI 4V ELI
 FixTiteTM- S, MarsTM, Fix-A-DentTM
Prosthetics 25
Cement Retained

OPA One Piece Screw-in Abutment Ti 6AI 4V ELI

PAB151 Angled Titanium Abutment 15° Ti 6AI 4V ELI

PAB151L Angled Titanium Abutment 15° - Long Ti 6AI 4V ELI

PAB251 Angled Titanium Abutment 25° Ti 6AI 4V ELI

PAB351 Angled Titanium Abutment 35° Ti 6AI 4V ELI

PAB151-1 Esthetic 1mm Angled Titanium Abutment 15° Ti 6AI 4V ELI

PAB151-2 Esthetic 2mm Angled Titanium Abutment 15° Ti 6AI 4V ELI

PAB151-3 Esthetic 3mm Angled Titanium Abutment 15° Ti 6AI 4V ELI

CAGPE Gold Alloy Abutment With Hex Gold / POM

CATPE Titanium / Plastic Abutment with Hex Ti 6AI 4V ELI / POM

CATPNE Titanium / Plastic Abutment without Hex Ti 6AI 4V ELI / POM

PRA3N Plastic Cylinder Casting Abutment POM

PRA3N-NH Plastic Cylinder Casting Abutment w/o Hex POM

PRA3 Plastic ST. Abutment Hex POM

PRA3-NH Plastic Standard Abutment w/o Hex POM

PRA3R Plastic Casting ST. Abutment Hex POM

PR5040 Plastic Cylinder Abutment Hex POM

Screw Retained - MU Trans Mucosal Abutments

TMI1 Straight Trans Mucosal Abutment 1mm Ti 6AI 4V ELI

TMI2 Straight Trans Mucosal Abutment 2mm Ti 6AI 4V ELI

TMI3 Straight Trans Mucosal Abutment 3mm Ti 6AI 4V ELI

TMI4 Straight Trans Mucosal Abutment 4mm Ti 6AI 4V ELI

TMI5 Straight Trans Mucosal Abutment 5mm Ti 6AI 4V ELI

TMA17 Angled Trans Mucosal Abutment 17° 2mm Ti 6AI 4V ELI

TMA1730 Angled Trans Mucosal Abutment 17° 3mm Ti 6AI 4V ELI

TMA30 Angled Trans Mucosal Abutment 30° 3mm Ti 6AI 4V ELI

TMA3040 Angled Trans Mucosal Abutment 30° 4mm Ti 6AI 4V ELI

TMA45 Angled Trans Mucosal Abutment 45° 4mm Ti 6AI 4V ELI

TMA-TGH TMA Healing Cap Ti 6AI 4V ELI

26 FixTiteTM- S, MarsTM, Fix-A-DentTM
Prosthetics

Screw Retained - MU Trans Mucosal Abutments (TMA™)

TMA-TTC TMA Titanium Temporary Cylinder Ti 6AI 4V ELI

TMA-PCS TMA Plastic Casting Sleeve w / Prosthetic Screw POM

TMA-A TMA Abutment Replica Ti 6AI 4V ELI

TMA-SRTO TMA Impression Copying Open Tray Ti 6AI 4V ELI

TMA-SRTC TMA Closed Tray Transfer Ti 6AI 4V ELI

Ball Attachment - Overdentures

TMIB1-P3 Ball Attachment 1mm w / Hex Ti 6AI 4V ELI

TMIB2-P3 Ball Attachment 2mm w / Hex Ti 6AI 4V ELI

TMIB3-P3 Ball Attachment 3mm w / hex Ti 6AI 4V ELI

TMIB4-P3 Ball Attachment 4mm w / Hex Ti 6AI 4V ELI

TMIB5-P3 Ball Attachment 5mm w / Hex Ti 6AI 4V ELI

TMIB6-P3 Ball Attachment 6mm w / Hex Ti 6AI 4V ELI

NC01 Plastic Ball Cap - White Nylon

NCP Plastic Ball Cap Pink Nylon

HOT Ball Cap Titanium Ti 6AI 4V ELI

Analog

FIA Internal Hex Implant Analog Brass

Transfers / Impression Coping

SOT10 Open Tray Slim Transfer 3.6mmDx10mmL Ti 6AI 4V ELI

SOT14 Open Tray Slim Transfer 3.6mmDx14mmL Ti 6AI 4V ELI

SCT09 Slim Closed Tray Transfer 3.5mmDx9mmL Ti 6AI 4V ELI

SCT13 Slim Closed Tray Transfer 3.5mmDx13mmL Ti 6AI 4V ELI

* Transfers will be chosen by length and width according to the planed prosthetic treatment and according to
the interocclusal distance.

RS Retrieval Screw

SRAS1 Retrieval Screw For Abutments Ti 6AI 4V ELI

RS Screws

CSS Implant Cover Screw Ti 6AI 4V ELI

SRAS Prosthetic Screw Ti 6AI 4V ELI

SRAS2 Short Prosthetic Screw Ti 6AI 4V ELI

PAS Screw for Angled Titanium Abutment Ti 6AI 4V ELI

 FixTiteTM- S, MarsTM, Fix-A-DentTM
Prosthetics 27
RS Screws

SRAS3 Retaining Screw For Angled TMA Ti 6AI 4V ELI

TPS TMA Prosthetic Screw Ti 6AI 4V ELI

TMA-SRAS1 Retaining Screw for TMA 1mm Ti 6AI 4V ELI

TMA-SRAS2 Retaining Screw for TMA 2mm Ti 6AI 4V ELI

TMA-SRAS3 Retaining Screw for TMA 3mm Ti 6AI 4V ELI

TMA-SRAS4 Retaining Screw for TMA 4mm Ti 6AI 4V ELI

TMA-SRAS5 Retaining Screw for TMA 5mm Ti 6AI 4V ELI

TMA-SRAS-OT TMA Screw for Open Tray Impression Copying Ti 6AI 4V ELI

CTSS Closed Tray Transfer Screw Short Ti 6AI 4V ELI

CTSL Closed Tray Transfer Screw Long Ti 6AI 4V ELI

* All systems are provided with their compatible screws. However, they may also be ordered individually.

Prosthetic Hand Drivers

SHHS 1.27 Hex Hand Driver - Short Stainless Steel

SHHM 1.27 Hex Hand Driver - Medium Stainless Steel

SHHL 1.27 Hex Hand Driver - Long Stainless Steel

TMA-SHHL TMA/FC Female Hand Hex Driver - Long Stainless Steel

TMA-SHHS TMA/FC Female Hand Hex Driver - Short Stainless Steel

Torque Drivers

SMTS 2.4 Hex Torque Driver - Short Stainless Steel

SMTL 2.4 Hex Torque Driver - Long Stainless Steel

SHT 1.27 Hex Torque Driver - Short Stainless Steel

SHTL 1.27 Hex Torque Driver - Long Stainless Steel

TDBA Torque Driver for Ball Attacment Stainless Steel

TMA-SHT TMA / FC Hex Torque Driver - Short Stainless Steel

TMA-SHTL TMA / FC Hex Torque Driver - Long Stainless Steel

Handpiece Drivers and Adaptors

HAS9020 2.4mm Male Hex Hand Piece Adapter - Short Stainless Steel

HAL9025 2.4mm Male Hex Hand Piece Adapter - Long Stainless Steel

TMA-HAS TMA / FC Hex Handpiece Adapter - Short Stainless Steel

TMA-HAL TMA / FC Hex Handpiece Adapter - Long Stainless Steel

28 Fix-1TM

Fix-1 TM
Fix-1™
AB/AE Surface Treatment

One Piece Implant System

The Fix-1™ is a tapered core spiral implant.

It is as easy to use as regular crown and bridge dentistry.

Fix-1™ features:

Minimally invasive surgery in narrow diameter implants

Immediate function/loading
Designed for narrow places
Offers fast and easy flapless procedure
Fix-1™ implants with narrow diameters are highly suitable
replacements for laterals in the maxilla and incisors in the mandible

L-10mm L-11.5mm L-13mm L-15mm

IO- 3.0mm FO-3010 FO-3011 FO-3013 FO-3015

IO- 3.3mm FO-3310 FO-3311 FO-3313 FO-3315

IO- 3.6mm FO-3610 FO-3611 FO-3613 FO-3615

IO- 4.2mm FO-4210 FO-4211 FO-4213 FO-4215

IO- 5.0mm FO-5010 FO-5011 FO-5013 FO-5015

Packed with:

CA6025 One Piece Driver Stainless Steel

 Fix-1TM
29
Fix-1TM 3.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

FO-3010 10

FO-3011 11.5

FO-3013 13

FO-3015 15

Drill Sequence OR

Ø 2.0 Ø (2.8) Ø 2.8

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. 2.0 1. 2.0 1. 2.0

2. (2.8) 2. 2.8

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
For all Bone Type Bone Type
Bone Type II & III I
30 Fix-1TM

Fix-1TM 3.3

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

FO-3310 10

FO-3311 11.5

FO-3313 13

FO-3313 15

Drill Sequence OR

Ø 2.0 Ø (2.8) Ø 2.8

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. 2.0 1. 2.0 1. 2.0

2. (2.8) 2. 2.8

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
For all Bone Type Bone Type
Bone Type II & III I
 Fix-1TM
31
Fix-1TM 3.6

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

FO-3610 10

FO-3611 11.5

FO-3613 13

FO-3615 15

Drill Sequence OR

Tri-Step Ø (3.2) Ø 3.2

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.2) 2. (3.2)

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead For all Bone Type Bone Type
Bone Type II & III I
of the Tri-Step drill.
32 Fix-1TM

Fix-1TM 4.2

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

FO-4210 10

FO-4211 11.5

FO-4213 13

FO-4215 15

Drill Sequence OR

Tri-Step Ø (3.6) Ø 3.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. (3.6) 2. (3.6) 2. 3.6

Note: (x.xx) drill to the depth of the cortex only. All measurements are in mm.
CAUTION: The drill preparation is up to 1mm longer than the implant.
* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead For all Bone Type Bone Type
Bone Type II & III & IV I
of the Tri-Step drill.
 Fix-1TM
33
Fix-1TM 5.0

AB/AE Surface
Titanium Alloy - Ti 6AI 4V ELI

Catalog No. Length mm

FO-5010 10

FO-5011 11.5

FO-5013 13

FO-5015 15

Drill Sequence OR OR

Tri-Step Ø 3.6 Ø (4.2) Ø 4.2 Ø (4.6) Ø 4.2 Ø 4.6

BONE TYPE BONE TYPE BONE TYPE

D-IV D-II & III D-I

1. Tri-Step* 1. Tri-Step* 1. Tri-Step*

2. 3.6 2. 3.6 2. 3.6
3. (4.2) 3. 4.2 3. 4.2
4. (4.6) 4. 4.6

Note: (x.xx) drill to the depth of the cortex only. For all Bone Type Bone Type Bone Type
All measurements are in mm. Bone Type IV II & III I

CAUTION: The drill preparation is up to 1mm longer than the implant.

* For initial drilling, you may use 2, 2.8 and 3.2 drills in sequence instead of the Tri-Step drill.
34 Kits

Standard Internal Hex Surgical Kit

Premium
 Kits
35
SURPP: Standard Internal Hex Plastic Surgical Kit - Premium

SRS Surgical Torque Ratchet 35-100 Ncm 1352DM Twist Step Drill 4.8/5.2mmD x 6-13mmL
DP6180 Depth Probe 1356DM Twist Step Drill 5.2/5.6mmD x 6-13mmL
1820DM Pilot Drill 2mmD x 8-18mmL PAPS Parallel Pin 11
1828DM Twist Step Drill 2.3/2.8mmD x 8-18mmL PAPL Parallel Pin 16
1832DM Twist Step Drill 2.8/3.2mmD x 8-18mmL MTD1 Tip Drill
1836DM Twist Step Drill 3.2/3.6mmD x 8-18mmL ITHS Drill Extension
1842DM Twist Step Drill 3.8/4.2mmD x 8-18mmL SHHS 1.27 Hex Hand Driver-Short
1846DM Twist Step Drill 4.2/4.6mmD x 8-18mmL SHHM 1.27 Hex Hand Driver-Medium
1852DM Twist Step Drill 4.8/5.2mmD x 8-18mmL 1511TDM Three Step Drill-Short
1320DM Pilot Drill 2mmD x 6-13mmL 2218TDM Three Step Drill-Long
1328DM Twist Step Drill 2.3/2.8mmD x 6-13mmL
1332DM Twist Step Drill 2.8/3.2mmD x 6-13mmL
1336DM Twist Step Drill 3.2/3.6mmD x 6-13mmL
1342DM Twist Step Drill 3.8/4.2mmD x 6-13mmL
1346DM Twist Step Drill 4.2/4.6mmD x 6-13mmL

SURPA: Standard Internal Hex Plastic Surgical Kit - Advanced

SRS Surgical Torque Ratchet 35-100 Ncm PAPL Parallel Pin 16

DP6180 Depth Probe ITHS Drill Extension
1820DM Pilot Drill 2mmD x 8-18mmL SHHS 1.27 Hex Hand Driver-Short
1828DM Twist Step Drill 2.3/2.8mmD x 8-18mm SHHM 1.27 Hex Hand Driver-Medium
1832DM Twist Step Drill 2.8/3.2mmD x 8-18mmL
1836DM Twist Step Drill 3.2/3.6mmD x 8-18mmL
1842DM Twist Step Drill 3.8/4.2mmD x 8-18mmL
1846DM Twist Step Drill 4.2/4.6mmD x 8-18mmL
PAPS Parallel Pin 11

Also available with short drills

SURPAS Standard Internal Hex Plastic Surgical Kit - Advanced Short Drills

SURPS: Standard Internal Hex Plastic Surgical Kit - Starter

SR Wrench Ratchet
1820DM Pilot Drill 2mmD x 8-18mmL
1828DM Twist Step Drill 2.3/2.8mmD x 8-18mmL
1832DM Twist Step Drill 2.8/3.2mmD x 8-18mmL
1836DM Twist Step Drill 3.2/3.6mmD x 8-18mmL
1842DM Twist Step Drill 3.8/4.2mmD x 8-18mmL
1846DM Twist Step Drill 4.2/4.6mmD x 8-18mmL
SHHS 1.27 Hex Hand Driver-Short
SHHM 1.27 Hex Hand Driver-Medium

Also available with short drills

SURPSS Standard Internal Hex Plastic Surgical Kit - Starter Short Drills
36 Tools

Tools
Tools

SRS PTR

Surgical Torque Ratchet 35-100 Ncm Prosthetic Torque Ratchet 15-35 Ncm
Stainless Steel Stainless Steel

SR SDH1

Wrench Ratchet Stainless Steel Surgical Driver Stainless Steel

DP6180 PAPS PAPL

Parallel Pin 11 Parallel Pin 16

Depth Probe Stainless Steel Stainless Steel Stainless Steel

Osteotomes

SOS-K
Osteotome Kit including: SOS-H, SOS20, SOS28, SOS325, SOS365

SOS-H

Osteotome Handle Aluminium + Stainless Steel

SOS20 SOS325

Straight Convex Osteotome 2.0mmD Ti 6AI 4V ELI Straight Convex Osteotome 3.25mmD Ti 6AI 4V ELI

SOS28 SOS365

Straight Convex Osteotome 2.8mmD Ti 6AI 4V ELI Straight Convex Osteotome 3.65mmD Ti 6AI 4V ELI
 Tools
37
Standard Internal Hex Surgical Tools

HAS9020 2.4mm Male Hex Hand Piece Adapter - Short Stainless Steel

HAL9025 2.4mm Male Hex Hand Piece Adapter - Long Stainless Steel

SMTS 2.4 Hex Torque Driver - Short Stainless Steel

SMTL 2.4 Hex Torque Driver - Long Stainless Steel

Standard Internal Hex Prosthetic Tools

SHT 1.27 Hex Torque Driver - Short Stainless Steel

SHTL 1.27 Hex Torque Driver - Long Stainless Steel

SHHM 1.27 Hex Hand Driver - Medium Stainless Steel

SHHS 1.27 Hex Hand Driver - Short Stainless Steel

SHHL 1.27 Hex Hand Driver - Long Stainless Steel

TDBA Torque Driver for Ball Attacment Stainless Steel

TMA-HAS TMA / FC Hex Handpiece Adapter - Short Stainless Steel

TMA-HAL TMA / FC Hex Handpiece Adapter - Long Stainless Steel

TMA-SHT TMA / FC Hex Torque Driver - Short Stainless Steel

TMA-SHTL TMA / FC Hex Torque Driver - Long Stainless Steel

TMA-SHHS TMA / FC Female Hand Hex Driver - Short Stainless Steel

TMA-SHHL TMA / FC Female Hand Hex Driver - Long Stainless Steel

38

Speed | Simplicity | Stability

 Surgical Drills
39
Surgical Drills
Two Step DLC Drills - Long

1820DM Pilot Drill 2mmD x 8-18mmL White White Stainless Steel & DLC

1828DM Twist Step Drill 2.3/2.8mmD x 8-18mmL Red Stainless Steel & DLC

1832DM Twist Step Drill 2.8/3.2mmD x 8-18mmL Blue Stainless Steel & DLC

1836DM Twist Step Drill 3.2/3.6mmD x 8-18mmL Green Stainless Steel & DLC

1842DM Twist Step Drill 3.8/4.2mmD x 8-18mmL Black Stainless Steel & DLC

1846DM Twist Step Drill 4.2/4.6mmD x 8-18mmL Yellow Stainless Steel & DLC

1852DM Twist Step Drill 4.8/5.2mmD x 8-18mmL Brown Stainless Steel & DLC

1856DM Twist Step Drill 5.2/5.6mmD x 8-18mmL Grey Stainless Steel & DLC

Two Step DLC Drills - Short

1320DM Pilot Drill 2mmD x 6-13mmL White Stainless Steel & DLC

1328DM Twist Step Drill 2.3/2.8mmD x 6-13mmL Red Stainless Steel & DLC

1332DM Twist Step Drill 2.8/3.2mmD x 6-13mmL Blue Stainless Steel & DLC

1336DM Twist Step Drill 3.2/3.6mmD x 6-13mmL Green Stainless Steel & DLC

1342DM Twist Step Drill 3.8/4.2mmD x 6-13mmL Black Stainless Steel & DLC

1346DM Twist Step Drill 4.2/4.6mmD x 6-13mmL Yellow Stainless Steel & DLC

1352DM Twist Step Drill 4.8/5.2mmD x 6-13mmL Brown Stainless Steel & DLC

1356DM Twist Step Drill 5.2/5.6mmD x 6-13mmL Grey Stainless Steel & DLC

Three Step DLC Drills

1511TDM Three Step Drill-Short Stainless Steel & DLC

2218TDM Three Step Drill-Long Stainless Steel & DLC

Tip Drill

MTD1 Tip Drill Stainless Steel

Drill Extension

ITHS Drill Extension Stainless Steel

40 Surgical Drills

Drill Stoppers
Long Drill - Regular
Each Drill Stop is marked with width and length.
Note: Some stops are suitable for long and
short drill according to the following markings.
L: Drill length for long drill (18 mm)
S: Drill length for short drill (13 mm)

Short Drill 13mm

L 2.0mmD 2.8mmD 3.2mmD 3.6mmD 4.2mmD 4.6mmD 5.2mmD 5.6mmD

6mm 1320L6SM 1328L6SM 1332L6SM 1336L6SM 1342L6SM 1346L6SM 1352L6SM 1356L6SM

8mm 1820L13SM 1828L13SM 1832L13SM 1836L13SM 1842L13SM 1846L13SM 1852L13SM 1856L13SM

10mm 1820L15SM 1828L15SM 1832L15SM 1836L15SM 1842L15SM 1846L15SM 1852L15SM 1856L15SM

11.5mm 1320L11SM 1328L11SM 1332L11SM 1336L11SM 1342L11SM 1346L11SM 1352L11SM 1356L11SM

Long Drill 18mm

L 2.0mmD 2.8mmD 3.2mmD 3.6mmD 4.2mmD 4.6mmD 5.2mmD 5.6mmD

6mm 1820L6SM 1828L6SM 1832L6SM 1836L6SM 1842L6SM 1846L6SM 1852L6SM 1856L6SM

8mm 1820L8SM 1828L8SM 1832L8SM 1836L8SM 1842L8SM 1846L8SM 1852L8SM 1856L8SM

10mm 1820L10SM 1828L10SM 1832L10SM 1836L10SM 1842L10SM 1846L10SM 1852L10SM 1856L10SM

11.5mm 1820L11SM 1828L11SM 1832L11SM 1836L11SM 1842L11SM 1846L11SM 1852L11SM 1856L11SM

13mm 1820L13SM 1828L13SM 1832L13SM 1836L13SM 1842L13SM 1846L13SM 1852L13SM 1856L13SM

15mm 1820L15SM 1828L15SM 1832L15SM 1836L15SM 1842L15SM 1846L15SM 1852L15SM 1856L15SM

16mm 1820L16SM 1828L16SM 1832L16SM 1836L16SM 1842L16SM 1846L16SM 1852L16SM 1856L16SM

Drill Stop kits

S1001M Long Drill Stop Kit - Regular

S1002M Long Drill Stop Kit - Wide
S1003M Short Drill Stop Kit - Regular
S1004M Short Drill Stop Kit - Wide
 41

MEDIGMA products meet the high standards set by various

regulatory agencies.
All MEDIGMA products are CE-marked in accordance with the
Council Directive 93/42/EEC and Amendment 2007/47/EC.
MEDIGMA complies with EN ISO13485:2012
Product availability may vary between countries.
For more information, please contact your local MEDIGMA office.
 05-2017
MKM010-01

+49 175 8726995 Siemensstrasse D-78564 Wehingen, Germany [email protected]